View
67
Download
1
Category
Preview:
Citation preview
1
Visit us @ www.thearyatechnologies.com
Email: aryaprotech@gmail.com
info@thearyatechnologies.com
Contact us@
0253-2512131
ATK-I 5/20/30
Current Sensor
Overview
The ATK-I 5/20/30 provides economical and precise solutions for AC or DC
current sensing in industrial, automotive, commercial, and communications
systems. The device package allows for easy implementation by the customer.
Typical applications include motor control, load detection and management,
switched-mode power supplies, and over-current fault protection.
Features
Operating Voltage: 4.5V to 5V
Current detecting range 5A/20A/30A depend upon Module No.
Onboard visual indicator (LED).
Compaq design and easily mount.
Simple 3 PIN header interface.
Analog output.
Sensitive to magnetic field.
Applications
Consumer electronics
Motor control
Load detection and management
Switched-mode power supplies
Over-current fault protection
2
Specifications
Parameter Min Typ Max Units
Working Voltage 4.5 5 8 Volts
Range 5/20/30 Amp
Part No Range Sensitivity
ATK-I 05 ±5Amp 185mV/A
ATK-I 20 ±20Amp 100mV/A
ATK-I 30 ±30Amp 66mV/A
Pin Diagram
Pin Pin Name
Pin Name
+5V Power Supply Regulated 5V supply input
GND Ground Ground level of power supply
OUT Output Output for external devices
1(Green
connector) Input supply line 1
2(Green
connector
To the device to
be measure 2
(VIOUT(Q)). The output of the sensor when the primary current is zero. For a
unipolar supply voltage, it nominally remains at VCC ⁄ 2. Thus, VCC = 5 V
translates into VIOUT(Q) = 2.5 V. Variation in VIOUT(Q) can be attributed to the
resolution of the Allegro linear IC quiescent voltage trim and thermal drift.
For No current output value is 2.5V
3
Note: Always connect the measuring device to the green connector. The green
connector should be in series with supply line.
Recommended