Carel - Ultimate SAM

ultimateSAM™

Assembled In The U.S.A.

ultimateSAM™

Assembled In The U.S.A.

The ultimateSAM offers “SHORT ABSORPTION steam systems for all uses”.

ultimateSAM™

Assembled In The U.S.A.

Short Steam Absorption is always guaranteed with our 3 Inch and 6 Inch center distance models.

ultimateSAM™

Assembled In The U.S.A.

No need to turn down any job that demands atmospheric steam supply!

Use it with almost any Carel Steam Humidifier.

ultimateSAM™

Assembled In The U.S.A.

With over 600 Frame SizesTo Choose From…

Each OrderIs Custom Fabricated In Our

Manheim, PA Factory

ultimateSAM™

Assembled In The U.S.A.

Bottom Feed Steam ModelsFrom

44 lbs./hr.To

814 lbs./hr.

ultimateSAM™

Assembled In The U.S.A.

Top Feed Steam ModelsFrom

132 lbs./hr.To

2442 lbs./hr.

ultimateSAM™

Assembled In The U.S.A.

Made with AISI 304 stainless steel for long life. Our patented uprights are sealed for lifetime use.

ultimateSAM™

Assembled In The U.S.A.

Our “Air Cushion” thermal insulation design minimizes heat gain between 2˚ & 4˚ F.

UltimateSAM™ is energy efficient

SupplySteam

Elongated dispersion nozzles made of pps Ryton, capture the pure dry steam from the supply uprights.

UltimateSAM™ is energy efficient

SupplySteam

Poly(p-phenylene sulfide) (PPS) is a polymer made up of alternating sulfur atoms and phenylene rings in a para substitution pattern. The highly stable chemical bonds of its molecular structure impart a remarkable degree of molecular stability toward both thermal degradation and chemical reactivity. The molecular structure also readily packs into a very thermally stable crystalline lattice, hence PPS is a semi-crystalline polymer with a high crystalline melting point of about 285°C (545°F). Because of its molecular structure, PPS also tends to char during combustion, making the material inherently flame retardant. PPS has not been found to dissolve in any solvent at temperatures below about 200°C (392°F).

Dry steam is channelled into the

air stream

Condensate falls down the inner wall and is drained or

aseptically converted to steam at the horizontal

manifold.

Channel steam from the inner

pipe

Disperse it into the air

Gravitydrain the

condensate

UltimateSAM™ is energy efficient

SupplySteam

Drier Steam & Reduced Condensate = Energy Efficiency

UltimateSAM™ is innovationWhy use Ryton® PPS?

For Nozzles?

• Dimensional & Thermal Stability• Chemical Resistance

• Non Flammability

UltimateSAM™ is innovationNozzle assembly

• Using a process known as “press fit” these nozzles are fit permanently on the pipe.

UltimateSAM™ is innovationNozzle assembly

• Each nozzle set is staggered to allow even steam flow.

UltimateSAM™ is versatilityWe offer 3 important styles of steam uprights.

• 1.5 inch O.D. tube with 6 inch center to center distance

• 1.75 inch O.D. tube with 6 inch center to center distance

• 1.5 inch O.D. tube with 3 inch center to center distance

UltimateSAM™ is energy efficient

Drier Steam & Reduced Condensate = Energy Efficiency

UltimateSAM™ is versatilityUse with Carel Steam Humidifiers

UltimateSAM™ is versatility

Single, Double, Quad, & Double Quad Connections

UltimateSAM™ is energy efficientSAB – bottom feed Series

• Available in 306 size combinations

• Maximum capacity – 814 lbs./ hour

• Steam Valves ( F&T) can be mounted internal or external to duct/air handling unit

• Available in 3” & 6” Centers Configuration

UltimateSAM™ is energy efficientSAT – top feed Series

• Available in 306 size combinations

• Maximum capacity – 2442 lbs./ hour

• Steam Valves ( F&T) can be mounted internal or external to duct/air handling unit

• Available in 3” & 6” Centers Configuration

UltimateSAM™ is energy efficient

• Production Pre-Pilot USA – January 2012

• Literature, Catalogs and IOM’s NOW

• Start working with Engineers NOW

ultimateSAM™