View
420
Download
0
Category
Tags:
Preview:
Citation preview
Mercredi 11 Février
Transmission et pérennisation des connaissances en entreprise
Olivier ADAM, Techspace Aero
Philippe CHARLIER, Prometheo & K-Ring Consulting
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
TRANSMISSION ET PÉRENNISATION DES CONNAISSANCES EN ENTREPRISE
Philippe Charlier Prometheo & K-ring Consulting Olivier Adam Cenco International (Techspace Aero) / 11 février 2015 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
1 /
Présentation : Guide pratique et méthodologique de la transmission et de la pérennisation des connaissances en entreprise Rédaction : Philippe Charlier et Françoise Rossion (2012) K-ring Consulting Dans le cadre de l’UDIL (Union pour le Développement de l'Industrie Liégeoise) et avec le soutien d’Agoria
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
2 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
OBJECTIF
Décrire une méthodologie à l’usage des entreprises
pour organiser la transmission des connaissances
à court terme et la gestion des connaissances
à plus long terme, en interne
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
3 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
PUBLICS
! S’adresse aux grandes entreprises comme aux PME
! Publics visés : " Directions générales " Directions opérationnelles " Directions des RH " Responsables d’équipe " Responsables projet " Responsable gestion des connaissances
! Inclut des conseils de lecture pour chaque public cible et en fonction du niveau d’approfondissement voulu
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
4 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
STRUCTURE DU GUIDE 5 SECTIONS
1. Introduction : comment lire et exploiter au mieux le Guide
2. Évaluer votre entreprise + Outils de diagnostic (4) : pour alimenter sa réflexion sur les raisons de mettre en place une stratégie et de déployer des projets de transmission et de partage des connaissances
3. Mettre en place une démarche de transmission des connaissances
4. Déployer une gestion stratégique des connaissances
Ces deux sections sont organisées de façon similaire (fiches outils, illustrations, points d’attention proposés de façon systématique)
5. Conclusions : vue d’ensemble et conditions de réussite
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
5 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
TRANSMISSION DES CONNAISSANCES
1. QUELS DOMAINES ?
Identifier les domaines de connaissances
2. QUI ?
Identifier les acteurs concernés
3. QUELLES CONNAISSANCES ?
Définir les connaissances à
transmettre
4. COMMENT ?
Etablir et organiser le plan de transfert
5. QUELS OUTPUTS ?
Suivre et évaluer le processus et les résultats
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
6 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
1. IDENTIFIER LES DOMAINES DE CONNAISSANCES CRITIQUES (EXEMPLE)
Division #
Métier 1
Métier 2
Métier 3
Métier 4
Sous-domaine 5 Sous-
domaine 2
Sous-domaine 6
Sous-domaine 3
Sous-domaine 7
Sous-domaine 4
Sous-domaine 8
Sous-domaine 1
Sous-domaine 1
Sous-domaine 2
Sous-domaine 3
Sous-domaine 4
Sous-domaine 5
Sous-domaine 1
Sous-domaine 2
Sous-domaine 3
Sous-domaine 4
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
7 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
2. IDENTIFIER LES ACTEURS CONCERNÉS (EXEMPLE)
Domaines ‘Seniors’ (transmetteurs-
tuteurs)
‘Juniors’ (bénéficiaires pressentis)
N+1 (encadrement)
Domaine-métier 1 Sr 1 Sr 2
Jr 1 Jr 2 Jr 3
A
Domaine-métier 2 Sr 3 Jr 4 Jr 5
B
Domaine-métier 3 Sr 4 Jr 6 C
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
8 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
3. IDENTIFIER LES CONNAISSANCES CRITIQUES (EXEMPLE)
! Cartographie
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
9 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
4. ETABLIR LE PLAN DE TRANSFERT (EXEMPLE)
Connaissance / Compétence visée Méthode / Plan Qui Quand (timing)
1. Effectuer des réglages 1. Explication / introduction
2. Observation du travail [ou travail en collaboration / en duo]
3. Réglage d’une pièce (base) avec senior en première ligne et junior dans le rôle de l’aidant
4. Debriefing et explications complémentaires (focus sur les outils utilisés dans le processus)
5. Même travail qu’à l’étape 2, en inversant les rôles
6. Debriefing et explication (synthèse) sur tout le cycle de travail (avec établissement d’une fiche de contrôle du travail réalisé)
Sr-Jr
Sr-Jr
Sr-Jr
Sr-Jr
Sr-Jr
Sr-Jr
X semaines
1. Tâches similaires aux précédentes, réalisées avec d’autres collègues (tournante)
Pièces et situations à prévoir :
1. …
2. …
1. En parallèle : lecture et synthèse de la documentation technique
2. Debriefings intermédiaires et final
Co-Jr
Jr
Sr-Jr
X semaines
2. Connaissance / Compétence suiv. … … …
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
10 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
TRANSMISSION DES CONNAISSANCES
1. QUELS DOMAINES ?
Identifier les domaines de connaissances
2. QUI ?
Identifier les acteurs concernés
3. QUELLES CONNAISSANCES ?
Définir les connaissances à
transmettre
4. COMMENT ?
Etablir et organiser le plan de transfert
5. QUELS OUTPUTS ?
Suivre et évaluer le processus et les résultats
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
11 /
Transmission des connaissances en entreprise Application à l’équipe d’ingénierie mécanique Cenco International (Techspace Aero)
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
12 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
TECHSPACE AERO, UNE SOCIÉTÉ DU GROUPE SAFRAN
56 %
Europe
47,000 Americas 13,100 Asia / Oceania
3,500 Africa / Middle East 2,600
66,200
As of December 31, 2013
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
13 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
TECHSPACE AERO HISTORIQUE
1949 Creation of the aircraft engine division of the FN - Fabrique Nationale Herstal Production of military engines under OEM license
1974 First commercial partnership in the CFM56 engine production
1977 F16 contract Construction of Herstal Plant Production and assembly of the Pratt & Whitney F100 engine
1989 Snecma participation as a major shareholder First partnership design contracts with Snecma (CFM56-7B)
1992 New company name Techspace Aero Development of the research department
2003 Acquisition of Cenco Inc. and development of the test cells activities (Cenco International TM)
2001-2004 First partnership agreements on complete modules low pressure compressor
2005 Snecma and Sagem merger to form Safran Group
2008 Transfer of F100 engine Maintenance activities to Pratt & Whitney
2010 Acquisition of ACI and consolidation of the engine equipment activities
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
14 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
TECHSPACE AERO 3 DOMAINES D’ACTIVITÉS
81%
15,5%
3,5%
Low pressure compressors and front bearing supports
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
15 /
Sous la marque Cenco InternationalTM, la BU Cenco de TA et la filiale Cenco US conçoivent, construisent et équipent des bancs d’essais pour tester des moteurs en développement, des moteurs de série à leur sortie de production ou des moteurs après maintenance.
Cenco US
Expertise : projets d’infrastructure « clé en main » + banc d’essais pour moteurs suspendus
Expertise : équipements pour banc d’essais pour moteur au sol + équipements auxiliaires d’essais
Cenco EU
Turnkey Test Facilities under the trademark
Test equipment under the trademark
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
16 /
USAGES MOTEURS
La conception et l’équipement d’un banc dépendent de son usage et du moteur à tester
APU Turboshaft Turboprop
Turbofan Turbojet
Développement Maintenance
Production
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
17 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
INGÉNIERIE MÉCANIQUE CENCO EUROPE
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
Responsable
Mécanique Electricité Instrumentation
Computer engineering
Equipe Engineering
Direction Installations d’essais
• Ingénieurs études
• Dessinateurs concepteurs
Olivier Adam
Commerce
Achats
Finances
Customer support
…
18 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
TRANSMISSION DE CONNAISSANCES POURQUOI C’EST IMPORTANT ?
! Composition disparate de l’équipe mécanique " Age / Expérience " Compétences " Mobilité
! Aspect « formalisation » nécessaire " Gestion de configuration " Participation à l’élaboration de NIT " Encadrement plus systématique
# nouveaux engagés # sous-traitants
" Assurer la pérennité de la société
! Accroître la polyvalence des membres de l’équipe " Intérims " Revues de projet
19 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
COMPAGNONNAGE MÉCANIQUE “QUOI”
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
20 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
COMPAGNONNAGE MÉCANIQUE “QUI”
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
« Seniors » (transmetteurs-tuteurs)
« Juniors » (bénéficiaires)
Yves Filipe
Gérard Dessinateur ?
Tony Olivier
Hung Fabian
Benoît
(40)
(50)
(80)
(40)
(50)
(40)
(40)
(40)
(Tot : 380 h x 2 + 20h = 780 h)
21 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
COMPAGNONNAGE MÉCANIQUE “COMMENT”
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
1. Dresser la carte des compétences " $ domaines identifiés « prioritaires »
2. Identifier les compétences critiques " « Rares » " Stratégiques
3. Organiser et définir le plan de transfert
4. Effectuer le transfert proprement dit
22 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
1.1. “DESSIN 3D” CARTE DES COMPÉTENCES
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
23 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
1.1. “DESSIN 3D” CARTE DES COMPÉTENCES
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
24 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
1.2. “DESSIN 3D” IDENTIFICATION DES COMPÉTENCES CRITIQUES
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
1. Créer l’environnement documentaire
2. Créer le 3D
3. Mise en plans
4. Mécanosoudés
5. Pièces sous pression
6. Plans d’assemblage
7. Mise en page
25 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
1.3. DESSIN 3D PLAN DE TRANSFERT
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
Connaissance / Compétence visée
Méthode / Plan Qui Quand (timing)
1. Choisir le point 0 du projet
1. (2) Discussion – échange Sr-Jr Objet (résumé) : c’est quoi, ça sert à quoi, à quoi ça s’applique, impacts des choix…
2. (4) En collaboration avec Sr : prises de mesures et constitution d’une maquette pour le projet (ex. Air Algérie)
3. (4) Formalisation par Jr
4. (4) Mini-formation assurée par Jr vers collègue(s)
Sr – Jr
Jr – Sr
Jr (Sr)
Jr – C
2. Attribuer une matière à la pièce Incl. Se rapporter aux tables de compatibilité
1. (3) Lecture de documents existants (disparates $ à rassembler [inventaire])
⇒ liste des documents [2.2.1]
2. (2) Discussion(s) collégiale(s)
3. (4) Mise(s) en situation sur nouveaux plans
4. (4) Formalisation par Jr
⇒ type / forme de document à formaliser (précisions ou modèle) [2.2.4]
Jr
Sr – Jr
Jr (Sr)
Jr (Sr)
Sr “Senior” Jr “Junior” C “Collègues” (1) Observation (2) Verbal (3) Lecture (4) Situation
Document à constituer
26 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
1.4. DESSIN 3D PLAN DE TRANSFERT DÉTAILLÉ
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
Numéro action
Action Resp. Délai
1 (3) Lecture de la NIT actuelle
(4) Réalisation d’une première base documentaire Jr 10/2012
2 (2) Débriefing Sr – Jr 10/2012
3 (4) Compléter le document $ Réaliser une check-list Jr 10/2012
4 (4) Mises en situation : tâches confiées à Jr impliquant définition des normes Jr (Sr) 10/2012
5 (2) Débriefings intermédiaires Sr – Jr 10/2012
6 (4) Mini-formation assurée par Jr vers collègues Jr – C 01/2013
Sr “Senior” Jr “Junior” C “Collègues” (1) Observation (2) Verbal (3) Lecture (4) Situation
27 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
1.4. DESSIN 3D CONCLUSION
! A l’issue du plan de transfert « Dessin 3D », deux manuels des études ont été créés
1. ME « Dessins techniques » " Règles à respecter pour la présentation " Formats des planches et des cartouches " Règles spécifiques « Ingénierie mécanique Cenco » " Catia v5 et AutoCAD 2013 " Nota génériques
2. Méthodologie spécifique de conception CFAO – Gestion des dossiers et fichiers " Références au manuel des études Techspace " Spécificités Cenco " Directives pour travail avec ou sans PLM " Document non finalisé (démission de Jr)
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
28 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
2.1. VISSERIE & RACCORDS CARTE DES COMPÉTENCES
! Dressée en 2 séances « brainstorming » de 3h
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
29 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
2.2. VISSERIE & RACCORDS PLAN DE TRANSFERT
! Compilation des informations par Sr
! Formation collective (2x4h) par Sr $ C " Ensemble de l’équipe mécanique " Illustration par de nombreux échantillons
! Constitution d’un manuel des études " Références bibliographiques " Règles de bonne pratique " Usages spécifiques Cenco " Illustrations
# Photos annotées # Schémas
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
30 /
This document and the information therein are the property of Techspace Aero, They must not be copied or communicated to a third party without the prior written authorization of Cenco International
COMPAGNONNAGE MÉCANIQUE CENCO BILAN
LIEGE CREATIVE / TRANSMISSION DES CONNAISSANCES EN ENTREPRISE / 11 FEV 2015 / P. CHARLIER & O. ADAM
! Heures pointées sur deux projets réalisés " 2012 60h " 2013 180h
! Début des projets 05/2012 pour départs à la retraite 01 et 03/2014 " ~12 mois effectifs " Le plan de transfert détaillé s’effectuait sur des projets " $ Délai trop court pour inscrire la démarche dans l’opérationnel
! Dynamique positive créée par le projet Dessin 3D " Démarche valorisante pour les « seniors » " De « qu’est-ce que j’y gagne » à « quand est-ce mon tour »…
! Le compagnonnage donne consistance aux départs futurs " Accompagnement au changement nécessaire
Recommended