Stalokpaversand 101227104131-phpapp02

StaLok Paver Sand

Presented by:Jon HubbsFeb 2010Montreal, CANADA2010 Stabilizer Solutions, Inc. All Rights Reserved.

Advancing the Evolution of Soil 28 Years Over 100,000 Projects 36 Countries

StaLok Paver Sand organic & polymeric organic: porous / flexible polymeric: firmness / resists weeds & insects

StaLok Paver Sand proprietary blend of polymer & organic binder first & only permeable polymeric joint sand on market natural sand appearance

Performance permeable locks sand between pavers minimizes erosion soaks water like sponge then drains

How it works binder works into pore space between different size particles with water, binder swells hardens when dry binding particles

The other guys ‘glue’ sand in place, cracking drainage? polymer wash out stains pavers -polymers release from sand / permanent ‘wet look’ around edges -sand on paver surface is wet / sand is glued to surface

Drainage 5-in (12.7 cm) of water per hour per 1-sqft (.09 m2) rates vary sheds water until it becomes saturated

Manage Stormwater recharges groundwater supply important in dry & wet regions esp important in cities: too much hardscape polluted run-off

Applications use with all types of pavers joint spaces no > ½” (1.3 cm) use with all types of edging

Applicationsvehicularpedestrianmaintenance

home commercial municipal

Driveway in Texas

Plaza in Switzerland

Historical Projects hi-tech performance + old world aesthetics

retain project integritywithout sacrificing performance

Plaza in Switzerland

50-lb (22.7 kg) bags

50-70 sqft = 1/8” joints 4.65-6.5 m2 = .3 cm joints 15-25 sqft = 1 cm joints 1.4-2.3 m2 = 1 cm joints

Coverages

Installation

Installation Precautions do not use over concrete or with other paver sands properly draining base remove organic matter prior install in dry weather (24 hours)

Installation Instructions sweep sand into joints

Installation Instructions tamp sand into joints

Installation Instructions saturate sand with fine mist

*don’t flood or use sharp spray

Installation Instructions dry until sand becomes firm

Freeze-thaw cycle acts like sponge when wet softens slightly, but stays put after dry, returns to firm state no cracking

Maintenance if imperfections arise, sweep more sand on top of existing material, and water

Thank you for your attentionDanny LeBlancSportechnic 2000www.sportechnic2000.com

Stabilizer Solutions, Inc.www.StabilizerSolutions.comInfo@stabilizersolutions.comp 602.225.5900 toll free 800.336.2468

2011 Stabilizer Solutions, Inc. All Rights Reserved.