View
2
Download
0
Category
Preview:
Citation preview
Summary
I built these to add speakers in my basement ceiling (I mounted four ofthem!).
The circular speaker holder "loop" was designed to fit a CANZ WIRELESSBLUETOOTH SPEAKER Model: SP880
This speaker has Bluetooth, Audio Auxiliary jacks, and a mini USB powerinput.
I have the speakers wired using the auxiliary jacks and the usb powerinput.
Gadgets > Audio
wallmount speaker mount bracket
Category: Audio Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
L Lockwatcher
Adjustable SpeakerBracket
VIEW IN BROWSER
updated 15. 11. 2019 | published 15. 11. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
310.6 KBupdated 15. 11. 2019
451.2 KBupdated 15. 11. 2019
451.9 KBupdated 15. 11. 2019
Resolution: 0.15 mm Quality
Infill: 20 Percent
Filament: Prusament PLA BlackNotes:
Prints easily without any supports on my Prusa MK3
Post-Printing
To Assemble:
In addition to the printed parts, you will need the following:
(1) #10 x 1/2" Cap screw and nut (for the speaker holder)
(1) 1/4-20 x 1" and locknut (360 Degree bracket)
(3) M6 x 30mm Cap head bolt, washers, and locknuts (interconnections)
Assembly is very easy (look at the pictures)
I used a pair of needle nose pliers to hold the nut in position to tighten the360 degree assembly. The bolt end is held in position by the hole in theassembly.
large_display_speaker_holder_extender_v1_10518.stl
large_display_speaker_bracket_-_bolt_side_v1_1051.stl
large_display_speaker_bracket_-_nut_side_v1_10518.stl
57.3 KBupdated 15. 11. 2019
39.6 KBupdated 15. 11. 2019
34.7 KBupdated 15. 11. 2019
168.0 KBupdated 15. 11. 2019
222.2 KBupdated 15. 11. 2019
Find source .stl files on Thingiverse.com
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
speaker_holder_v1.stl
speaker_holder_extender_v1.stl
speaker_bracket_wall_v1.stl
speaker_bracket_-_nut_side_v1.stl
speaker_bracket_-_bolt_side_v1.stl
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
Recommended