Summary

I built these to add speakers in my basement ceiling (I mounted four ofthem!).

The circular speaker holder "loop" was designed to fit a CANZ WIRELESSBLUETOOTH SPEAKER Model: SP880

This speaker has Bluetooth, Audio Auxiliary jacks, and a mini USB powerinput.

I have the speakers wired using the auxiliary jacks and the usb powerinput.

Gadgets > Audio

wallmount speaker mount bracket

Category: Audio Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

L Lockwatcher

Adjustable SpeakerBracket

VIEW IN BROWSER

updated 15. 11. 2019 | published 15. 11. 2019

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

310.6 KBupdated 15. 11. 2019

451.2 KBupdated 15. 11. 2019

451.9 KBupdated 15. 11. 2019

Resolution: 0.15 mm Quality

Infill: 20 Percent

Filament: Prusament PLA BlackNotes:

Prints easily without any supports on my Prusa MK3

Post-Printing

To Assemble:

In addition to the printed parts, you will need the following:

(1) #10 x 1/2" Cap screw and nut (for the speaker holder)

(1) 1/4-20 x 1" and locknut (360 Degree bracket)

(3) M6 x 30mm Cap head bolt, washers, and locknuts (interconnections)

Assembly is very easy (look at the pictures)

I used a pair of needle nose pliers to hold the nut in position to tighten the360 degree assembly. The bolt end is held in position by the hole in theassembly.

large_display_speaker_holder_extender_v1_10518.stl

large_display_speaker_bracket_-_bolt_side_v1_1051.stl

large_display_speaker_bracket_-_nut_side_v1_10518.stl

57.3 KBupdated 15. 11. 2019

39.6 KBupdated 15. 11. 2019

34.7 KBupdated 15. 11. 2019

168.0 KBupdated 15. 11. 2019

222.2 KBupdated 15. 11. 2019

Find source .stl files on Thingiverse.com

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

speaker_holder_v1.stl

speaker_holder_extender_v1.stl

speaker_bracket_wall_v1.stl

speaker_bracket_-_nut_side_v1.stl

speaker_bracket_-_bolt_side_v1.stl

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition