View
0
Download
0
Category
Preview:
Citation preview
Veggie/Fruit Basket
Made by April WilkersonWilkerdos.com
Copyright 2015
Page 1
I had some 1/2" poplar scraps so I used it for this project, however a 1 x 6 x 10' pine board would be fine as well.
20 degrees
Cut List
120"
5-1/2"
2-1/2"
12-1/2" 9-3/4"3-1/2" 1-1/4"
14-1/4"
Take the four end pieces and make a 20 degree cut on both ends.
Make the BasketsI just eye balled the placement of the slats but they are roughly 3/4" apart.
Start with attaching the four slats on the bottom with wood glue and 1" brad nails if you are using 1/2" material, or 1 1/4" brad nails if you are using 3/4" material.
Then add the slats to the side. Use the same steps to make a second basket.
Page 2
Add the Sides
Now attach the side boards with wood glue and 3/4" screws if you are using 1/2" material, or 1" screws if you are using 3/4" material.
3 5/8"
Be sure to check out the build video on my YouTube channel and visit my website at Wilkerdos.com for other projects. Be safe!
Page 3
Recommended