Veggie/Fruit Basket

Made by April WilkersonWilkerdos.com

Copyright 2015

Page 1

I had some 1/2" poplar scraps so I used it for this project, however a 1 x 6 x 10' pine board would be fine as well.

20 degrees

Cut List

120"

5-1/2"

2-1/2"

12-1/2" 9-3/4"3-1/2" 1-1/4"

14-1/4"

Take the four end pieces and make a 20 degree cut on both ends.

Make the BasketsI just eye balled the placement of the slats but they are roughly 3/4" apart.

Start with attaching the four slats on the bottom with wood glue and 1" brad nails if you are using 1/2" material, or 1 1/4" brad nails if you are using 3/4" material.

Then add the slats to the side. Use the same steps to make a second basket.

Page 2

Add the Sides

Now attach the side boards with wood glue and 3/4" screws if you are using 1/2" material, or 1" screws if you are using 3/4" material.

3 5/8"

Be sure to check out the build video on my YouTube channel and visit my website at Wilkerdos.com for other projects. Be safe!

Page 3