View
10
Download
0
Category
Preview:
Citation preview
KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
TRUMPF TRUBEND 5230
CNC press brake
Manufacturer TRUMPF Modell TRUBEND 5230 Year of manufacture 2010 Control TRUMPF TASC 6000 Machine number B0507A0231 Press force 2.300 kN Length of bend 3.230 mm
2 - TRUMPF TRUBEND 5230
TECHNICAL DATA
Machine TRUBEND 5230 Press force 2.300 kN
Lenght of bend 3.230 mm
Weight, approx. 16.400 kg
Dimensions (W x D x H), approx. 4.270 x 1.955 x 3.200 mm
Width between columns 2.690 mm
Throat 420 mm
Work table width 180 mm
Installation height 615 mm
Working height with lower tool 100 mm 1.050 mm
Permissible upper tool height (incl. adapter) for BendGuard
110 – 390 mm
Y-closing speed 220 mm/s
Low Y-closing speed („fully secured machine“) 0.1 – 10 mm/s
Height Y-closing speed („basic machine“) 0.1 – 220 mm/s
Y-opening speed 220 mm/s
Stroke 445 mm
Inclination of the beam ± 10 mm
Max. stop range X 860 mm
Electrical system 42 kVA
Pneumatic system 6 ± 1 bar
Quantity of hydraulic oil 330 l
Control system TASC 6000 15‘‘ TFT monitor 2x40 GB hard disk Interfaces: parallel, RS232, USB, Ethernet
6 axes backgauge
Travel X1- / X2- axis 600 mm
R1- / R2- axis 250 mm
Z1- / Z2- axis 2.280 mm
Max. stop range in X direction 860 mm
in Z direction 2.470 mm
Speed X1- / X2- axis 0 – 1.000 mm/s
R1- / R2- axis 0 – 330 mm/s
Z1- / Z2- axis 0 – 1.000 mm/s
Distance Finger – Finger 10 mm
Finger – side part 115 mm
Machine axes
3 - TRUMPF TRUBEND 5230
6 axes backgauge
One set upper tools
BendGuard (for 220 mm/s)
2x bending aids
Table extension 900 mm
Upper tool clamping, hydraulic
Lower tool displacement CNC
CNC crowning
User guide / Documentation
Machine parameters on CD
4 - TRUMPF TRUBEND 5230
EQUIPMENT
Bending aid Max. swivel angle 47°
Max. working speed 45°/s
Max. support weight for each arm 100 kg
Supported side length 1.000 mm
Lower tool height adjustment range 30 – 150 mm
Die width adjustment range 6 – 100 mm
Maximum tool mass in the area of the table length extension
10 kg
Bending aid weight for each arm 330 kg
Table width 275 mm
5 - TRUMPF TRUBEND 5230
1 – Upper drive and hydraulic system 6 – Upper tool clamp
2 – Control panel 7 – TRUMPF BendGuard
3 – Backgauge 8 – Lower tool clamp
4 – Operator console 9 – Machine body
5 – Beam
The most important modules
Machine body The FEM-designed machine body is an all-steel welded construction. It consists of two side elements, the press table and a connection support. The machine frame is characterized by:
• Consistently high level of accuracy. • Large throat for a large bending space. • Easy access to the tool holder.
6 - TRUMPF TRUBEND 5230
Upper drive and hydraulic system The beam is driven by a high-pressure internal gear pump via a self- ventilating proportional hydraulic system. An integrated path measurement system linked with high-precision pressure sensors makes it possible to compensate for machine body springback, thus ensuring the correct positioning of the beam during press brake bending. This combination has the following advantages:
• The press force is immediately available. • A high level of positioning accuracy allows precise reproduction of bending angles, even for large-scale jobs. • The machine is particularly quiet. Inclination of the beam
The hydraulic cylinder pairs on each side can be triggered separately. This allows a defined inclined position of the beam to be programmed. Automatic shutdown system for the hydraulics
The hydraulics is automatically switched off after the downtime specified under Technology , "Program parameters", "Hydraulics switch off time" Beam The beam is suspended spherically in the machine frame. Its main features include:
• Consistently high level of accuracy. • High level of bending rigidity.
7 - TRUMPF TRUBEND 5230
Control panel The TruBend Series 5000 is equipped with the TASC 6000 control unit as standard equipment.
1 – User interface
2 – Impact button EMERGENCY STOP
3 – Numerical keyboard with <Enter>
4 – Cursor key
5 – START
6 – STOP
7 – Keyboard with mouse
Operation via touchscreen The control panel of the TruBend Series 5000 is equipped with a touchscreen. Keyboard or softkey entries are a thing of the past: simply press the desired point on the user interface.
Using the keyboard or the mouse to make entries is also possible.
MACHINE PICTURES
8 - TRUMPF TRUBEND 5230
9 - TRUMPF TRUBEND 5230
TRANSPORT
10 - TRUMPF TRUBEND 5230
A – Distance between the lifting brackets: 2.156 mm (84.88 in) D – Diameter: 80 mm (3.15 in) X – Distance upper edge - center of the lifting holes: 176 mm (6.93 in) Thickness of the lifting brackets: 80 mm (3.15 in)
Source for technical details: user guide TRUMPF TruBend Serie 5000 – Version 02/2008
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
Thank you very much for your interest
KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
Recommended