Theatre Seating - Auditoria...10mm curved preformed plywood base and covered in selected material....

Preview:

Citation preview

Theatre Seating

TS 4 Chair Fully upholstered floor fixed theatre chairs, available with or armrests.

General Specification

Seat490mm front to back, upholstered 90mm thick CMHR 50 foam cushion, supported on a high-density birch plywood base and covered in selected material.

Back500mm top to bottom, upholstered 25mm thick CMHR 35 foam cushion with a lumbar pad, supported on a 10mm curved preformed plywood base and covered in selected material.

Arms (optional)270mm long x 70mm wide, upholstered 25mm thick CMHR foam on a plywood base and covered in selected material.

StanchionsConstructed from 50mm x 25mm rectangular hollow section, flat plate and steel bar. Pivot action complete with nylon bush and silencer. End stanchions complete with plywood end panel, upholstered to match other components. All steelwork is powder coated to RAL 7016 anthracite grey or RAL 9005 black as standard.

MaterialCovering material to be selected from standard range.

OptionsRefer to options section.

TS 4 Chair

TS 4 Cardinal Newman College

TS 4 Cardinal Newman College

TS 4 Lyric Theatre

TS 4 Museum of Liverpool

TS 4 Salem Chapel, Leeds

TS 5 Chair Fully upholstered floor fixed chair, available with or without armrests.

General Specification

Seat460mm front back, upholstered 60mm thick CMHR 60 contoured foam cushion, supported on a high-density birch 12mm plywood base. Underside finished with a 6mm capping and fitted with a jacket cover in selected material.

Back500mm top to bottom, upholstered 50mm thick CMHR 35 contoured foam cushion, supported on a high-density birch plywood base. Outside back finished with a 6mm capping and fitted with a jacket cover in selected material.

StanchionsConstructed from 40mm x 20mm (40) hollow section steel and plate, complete with sprung “auto-tip” seat brackets to BS5216 ND/3. All steelwork is powder coated to RAL 7016 anthracite grey or RAL 9005 black as standard.

Arms (optional)250mm in length with profiled side panels in 12mm plywood. Top and sides covered with CMHR foam in selected material.

MaterialCovering material to be selected from standard range.

OptionsRefer to options section.

TS 5 Chair

TS 5 Baths Hall

TS 5 Birmingham Ormiston College

TS 5 Grove Theatre, Dunstable

TS 5 The Leys School, Cambridge

TS 6 Premium Fully upholstered, floor fixed chair is available with or without armrests.

General Specification

Seat 450mm front to back, upholstered 60mm thick CMHR 60 foam cushion, supported on 12mm thick high-density birch plywood base curved back to front for comfort and covered in selected material. Underside finished with 3mm thick plywood and 6mm capping, with concealed brackets.

Back470mm top to bottom, upholstered anatomically contoured CMHR 50 foam cushion, supported on a 10mm thick high-density birch plywood base curved side to side. Outside back finished with 6mm capping and covered in selected material.

Arms (optional)250mm in length with profiled side panels in 12mm plywood. Top and sides covered with CMHR foam in selected material.

StanchionsConstructed from hollow section steel and plate, complete with sprung “auto-tip” seat brackets to BS5216 ND/3. All steelwork is powder coated to RAL 7016 anthracite grey or RAL 9005 black as standard.

MaterialCovering material to be selected from standard range.

OptionsRefer to options section.

TS 6 Premium Chair

660

870

O/AL

L HEI

GHT

500MIN. CENTRES

465

CROW

N

TS 7 Chair Fully upholstered floor fixed theatre chairs with square profile backrest, available with and without armrests.

General Specification

Seat490mm front to back, upholstered 90mm thick CMHR 50 foam cushion, supported on a high-density birch plywood base and covered in selected material.

Back500mm top to bottom, upholstered 50mm thick CMHR 35 foam cushion with lumbar pad, supported on a 10mm preformed curved plywood base and covered in selected material.

Arms285mm long x 70mm wide, upholstered 25mm thick CMHR foam on plywood base and covered in selected material.

StanchionsConstructed from 50mm x 25mm rectangular hollow section, flat plate and steel bar. Pivot action complete with nylon bush and silencer. End stanchions come compete with plywood end panel, upholstered to match other components. All steelwork is powder coated to RAL 7016 anthracite grey or RAL 9005 black as standard.

MaterialCovering material to be selected from standard range.

OptionsRefer to options section.

TS 7 Chair

TS 7 Eastwood Theatre, Giffnock

TS 7 South Shields Library

TS 7 Southport Cultural Centre

TS 8 Chair Fully upholstered floor fixed theatre chairs with square profile backrest, available with and without armrests.

General Specification

Seat490mm front to back, upholstered 135mm thick CMHR 40 foam cushion, supported on a high-density 12mm birch plywood base and covered in selected material.

Back490mm top to bottom, upholstered 30mm thick CMHR 35 foam cushion with 30mm lumbar pad, supported on a 10mm curved preformed plywood base and covered in selected material.

Arms (optional)310mm long x 70mm wide, upholstered 25mm thick CMHR foam on plywood base and covered in selected material.

StanchionsConstructed from 50mm x 25mm rectangular hollow section, flat plate and steel bar. Pivot action complete with nylon bush and silencer. End stanchions come compete with plywood end panel, upholstered to match other components. All steelwork is powder coated to RAL 7016 anthracite grey or RAL 9005 black as standard.

MaterialCovering material to be selected from standard range.

OptionsRefer to options section.

TS 8 Chair

TS 8 Anglia Ruskin University

TS 8 Heart of Hawick, Scotland

TS 8 Southport Little Theatre

TS 9 Chair Fully upholstered pedestal theatre chair, available with or without armrests.

General Specification

Seat470mm front to back, upholstered 75mm thick CMHR 50 foam cushion supported on a 12mm birch plywood base and covered in selected material.

Back490mm top to bottom, constructed or pre-formed 10mm birch plywood, upholstered 50mm thick CMHR 35 foam with lumbar support and covered in selected material.

StanchionsPedestal type, constructed of 80mm x 8mm flat steel bar, complete with pivot action, nylon bush and silencer. All steelwork is powder coated to RAL 7016 anthracite grey or RAL 9005 black as standard.

Arms230mm long x 75mm wide, upholstered 25mm thick CMHR foam pad on plywood base and covered in selected material.

MaterialCovering material to be selected from standard range.

OptionsRefer to options section.

TS 9 Chair

TS 9 Pinderfields Education Centre, Wakefield

TS 10 Chair Fully upholstered floor fixed theatre chair, with luxurious feel thicker seat and back, available with or without armrests.

General Specification

Seat500mm front to back upholstered moulded 125mm thick CMHR 50 foam, supported on 12mm thick high-density birch plywood base curved back to front for comfort. 8mm capping to underside of seat with zip fastened cover in selected material.

Back595mm top to bottom, constructed on a 10mm thick pre-formed plywood base. Upholstered with 100mm moulded CMHR 50 foam incorporating lumbar support. Outside back finished with 3mm upholstered outer plywood with 6mm capping foam, covered in selected material.

StanchionsConstructed of hollow section steel 40 x 40 and flat bar, complete with pivot action brackets including nylon bush and silencer buffer. All steelwork is powder coated to RAL 7016 anthracite grey or RAL 9005 black as standard.

Arms300mm long x 70mm wide (minimum) timber constructed box design with inner and outer side panels. Upholstered CMHR 25 with a 6mm capping and covered in selected material.

MaterialCovering material to be selected from standard range.

OptionsRefer to options section.

TS 10 Chair

TS 10 Home cinema, Scotland

TS 11 Chair Fully upholstered floor fixed, square uniform theatre chair, available with or without armrests.

General Specification

Seat440mm front to back, upholstered 63mm thick CMHR 50 foam cushion, supported on a high-density birch plywood base and covered in selected material. Underside finished with 3mm thick plywood and 6mm capping, with concealed brackets.

Back500mm top to bottom, upholstered CMHR 40 and 35 foam cushion with lumber support on a high-density birch plywood base and covered in selected material.

StanchionsConstructed from 60mm x 40mm RHS in beam format with 40mm x 40mm RHS legs and flat bar foot plates. Backs and seats secured with hidden brackets and seat cantilevers with “auto-tip” seat function. All steelwork is powder coated to RAL 7016 anthracite grey or RAL 9005 black as standard.

Arms (Optional)250mm in length with profiled side panels in 12mm plywood. Top and sides covered with CMHR foam in selected material.

MaterialCovering material to be selected from standard range.

OptionsRefer to options section.

TS 11 Chair46

5CR

OWN

640 315

900

O/AL

L HE

IGHT

* CHAIR CTRS

* CHAIR CTRS CAN BE ALTERED TO SUIT DIFFERENT SITE CONDITIONS

TS 11 Trafalgar Theatre, London

TS 11 Cheltenham Ladies College

TS 26 Chair Fully upholstered floor fixed double tip-up bench seat.

TS 26 Benenden School Theatre

TS 1 Chair Compound polypropylene floor fixed chairs, seats and backs with anti-UV and anti-static additives.

RS 25 Fixed Droylsden Academy, Manchester

Recommended