View
36
Download
0
Category
Preview:
DESCRIPTION
The PL-259 Connector. Amphenol Nickel Plated Body Silver Plated Pin. No Name - Made in USA Silver Plated Body Silver Plated Pin. UG-175 Reducer Silver Plated. Teflon Insulator. Phenolic Insulator. File around the holes in a nickel plated connector to make it easier to solder. - PowerPoint PPT Presentation
Citation preview
1
The PL-259 Connector
AmphenolNickel Plated BodySilver Plated Pin
No Name - Made in USASilver Plated BodySilver Plated Pin
UG-175 ReducerSilver Plated
2
3
Teflon Insulator
Phenolic Insulator
4
File around the holes in a nickel plated
connector to make it easier to solder.
5
Before doing anything slip the shell and reducer onto the
coaxial cable!
6
Remove the jacket from the cable. Be careful not to nick the shield!
7
Slide the reducer up the cable so the end is even with the jacket. Fold the shield back
over the reducer.
8
Trim the shield to just above the threads on the
reducer.
9
Remove the insulation from the center
conductor. Be careful not the nick the center
conductor!
10
Push the reducer into the body of the
connector and screw in. The shield will be visible through the holes in the body.
11
12
Solder the body to the shield & reducer
through all four holes in the body.
13
Trim the center conductor even with the
end of the pin in the connector. Solder the center conductor to the
pin.
14
15
Slip the shell over the body and screw on.
16
Finished!
Recommended