the future is our - BionerImplant types and dimensions I mplant t ypes and dimensions 2 IMP P 2,7...

Kelt sistemas implantológicos | Catalog

BIONER | Espigolera 9 - 08960 Sant Just Desvern - BarcelonaTel: 93 470 03 60 | Fax: 93 470 35 27 | bioner@bioner.es | www.bioner.es

the futureis ourpresent

Contents

€ € Price list

Implant overviewTypes and dimensionsDrill sequenceSurgical protocol

HE HE External hexagon components

CI CI Internal cone components

HI HI Internal hexagon components

Instruments

Introduction

the futureis ourpresent

Introduction

1© BIONER. Espigolera 9 - 08960 Sant Just Desvern - Barcelona | Tel. 93 470 03 60 - Fax. 93 470 35 27 | bioner@bioner.es | www.bioner.es

In 2006 Bioner introduced several improvements in its implant design, including a new surface developed un-

Bioner was established in 1992 and, in its early years, dedicated itself exclusively to the manufac-ture and sale of components compatible with all major implant systems. In 1998, already enjoying a strong position in the Spanish market, Bioner started the design, development and marketing of its own implant under the guidance of various uni-versities and renowned research centers.

In 2005, in order to increase the capacity and quality of its production process, Bioner acquired an industrial plant where the headquarters moved later on.

In recent years the company has continued to promote the expansion and improvement of products by incorporating cutting-edge machinery in order to continue to supply the Spanish market and start trading in the foreign market.

Bioner complies the guidelines contained in both ISO 9001 and 13485 and has both

ISO 13485 ISO 9001

Implant overview | Types and dimensions Drilling sequence | Surgical protocol

The chosen method to improve the implants surface is acid etching, discarding other methods that entail a greater contamination risk. Acid etching creates cavities and pores in the implant surface that enables a rapid bone growth through them, a phenomenon known as osteoconduction. Bioner implants enable osteointegration in a short period of time, also in early and immediate loading procedures.

PROFILOMETRY.Ra value of 0,72 µm

FATIGUE TEST. Fatigue limit ( 5x10 6 cycles) of 450N.

CYTOTOXICITY FOLLOWING ISO 10993 Standard. NO contamination found.

Before their commercial release, Bioner implants have un-dergone a series of tests in order to validate their proper performance. Some of the results obtained are:

A more complete dossier detailing the tests performed and the results obtained is available for those customers interested in further information.

Implant characteristics

IMP© BIONER. Espigolera 9 - 08960 Sant Just Desvern - Barcelona | Tel. 93 470 03 60 - Fax. 93 470 35 27 | bioner@bioner.es | www.bioner.es

ristic

Implant types and dimensions

IKELT BIKELT Suited for bone types III and IV

D.5P.5

D.4P.4,1

D.4,1P.4,1

D.3,75P.4,1

D.3,3P.4,1

D.5P.4

L. 18 IKELT418IKELT37518

L. 6 BIKELT5/46

L. 7 IKELT57IKELT47IKELT3757 BIKELT5/47

L. 8,5 IKELT585IKELT485 BIKELT485IKELT37585 BIKELT5/485

L. 10 IKELT510IKELT410 BIKELT410IKELT37510IKELT3310 BIKELT5/410

L. 11,5 IKELT5115IKELT4115 BIKELT4115IKELT375115IKELT33115 BIKELT5/4115

L. 13 IKELT513IKELT413 BIKELT413IKELT37513IKELT3313 BIKELT5/413

L. 15 IKELT515IKELT415 BIKELT415IKELT37515IKELT3315

Implant types and dimensions

3IMP© BIONER. Espigolera 9 - 08960 Sant Just Desvern - Barcelona | Tel. 93 470 03 60 - Fax. 93 470 35 27 | bioner@bioner.es | www.bioner.es

HIKELT

D.3,8Dc.3,95

HIKELT3885

HIKELT3810

HIKELT38115

HIKELT3813

HIKELT3815

D.4,7Dc.4,9

HIKELT4785

HIKELT4710

HIKELT47115

HIKELT4713

HIKELT4715

L. 8,5

L. 11,5

Drilling sequence/ External hexagon implants

IKELT BIKELT

Ø3,3 Implant

Optional

Ø3,75 Implant

Optional Optional

Ø4 Implant

Optional

Ø4.1 ImplantF-LA

F-AV3/4 Ø4 | 500/800 RPM

F-AV5 Ø5 | 500/800 RPM

F-325C

F-325L

F-285C

F-285L

F-315C

F-315L

8.5 01011.5

131518

Ø2 | 800/1000 RPM

Ø2.85 | 800/1000 RPM

Ø3 | 500/800 RPM

Ø3.15 | 500/800 RPM

Ø3.25 | 500/800 RPM

Ø3.8 | 500/800 RPM

Ø4 | 500/800 RPM

Implante Ø5 Ø5 Implant

Optional Optional

Drilling sequence/ Internal hexagon implants

HIKELT

F-AV3/4 Ø4 | 500/800 RPM

F-AV5 Ø5 | 500/800 RPM

F-325C

F-325L

F-285C

F-285L

F-315C

F-315L

8.5 01011.5

131518

Ø2 | 800/1000 RPM

Ø2.85 | 800/1000 RPM

Ø3 | 500/800 RPM

Ø3.15 | 500/800 RPM

Ø3.25 | 500/800 RPM

Ø3.8 | 500/800 RPM

Ø4 | 500/800 RPM

Ø3.8 Implant Ø4.7 Implant

Optional

Surgical protocol

Package opening

Remove the plastic tube from inside the box. The box contains the traceability la-bels as well.

Unscrew the colored cap , breaking the seal, and drop the inner container (which contains the implant) into the sterile

Remove the hexed cap from the cylinder. The implant is inside of the tube, pro-tected by a Titanium ring.

When needed, unscrew the superior part

Implant insertion

Remove the implant with the insertion tool.

Bring the implant towards the oral cav-ity. It is recommended to do it just as it

inverted.

Start the implant insertion in the bone bed with as low revolutions per minute as possible. Do not exceed an insertion Torque of 55 Ncm.

Once the implant is placed remove the insertion tool, shaking it slightly.

Surgical protocol

WARNING

Do not insert the tool into the implant while the handpiece is rotating. The im-plant connection may be damaged.

In case it is necessary to reinitiate the insertion process once it has already started, it is recommended to do it with a ratchet.

Cover screw placement

Place the cover screw over the implant.

HEExternal Hexagon Components

Healing abutments

X=2,3,4,5PC-x/D5

X=2,4PC-xWP

X=2,4PC-xNP

X=2,3,4,5,7PC-x

X=3,4,5PC-xA

Open tray impression copings

I-2NP I-2 I-2R I-2S I-2/D5 I-2WP

ø3,3NP ø3,3/ø3,75/ø4 ø5 ø5WP User guide

I-2B I-2C I-2D I-2B/D5

Closed tray impression copings

Hexed components. Non- hexed components.

Direct-to-implant external hexagonHealing abutments/ Impression copings

ling a

1HE© BIONER. Espigolera 9 - 08960 Sant Just Desvern - Barcelona | Tel. 93 470 03 60 - Fax. 93 470 35 27 | bioner@bioner.es | www.bioner.es

Direct-to-implant external hexagonAnalogs | Castables

ø3,3NP ø3,3/ø3,75/ø4 ø5 ø5WP User guide

Castables

Analogs

Metal base

C-2/D5 C-2WPC-2 CR-2

C-1NP C-1 C-1/D5 C-1WP

A-2NP A-2 A-2/D5 A-2WP

Direct-to-implant external hexagonTemporary abutments | Final abutments | Ball abutments

all ab

ø3,3/ø3,75/ø4 User guideø5

Temporary abutments

MP-2 MPT-2MPT-1MP-1

Final abutments

MB-2 MB-1

MRA-2 MRA-1

MB-2/D5

MRA-2/D5

MB-1/D5

MRA-1/D5

Ball abutments

CTR-CCTR-xX=0,1,2,3

Direct-to-implant external hexagonCaps | Cap accessories | Screws

es | S

ø3,3NP ø3,3 /ø3,75/ø4 / ø5 ø5WP

Screws

T-2ANP T-2AWP

Caps Cap accessories

CiCH CiC

ø3,3/ø3,75/ø4

Hexed components. Non-hexed componets.

CiE C.CiC T-2TL T-2TC

T-2AT-1CT-1A T-2

T-2C T-2U T-2E

T-2A/1.3

User guide

Anti-loosening

External hexagon CTM conical abutmentTapered abutments | Healing cap | Impression copings | Analog | Castable

ealing c

ap | I

og | C

ø3,3/ø3.75/ø4

Analog

Castable

Healing cap

Impression copings

I-5M I-5BM

Tapered abutments

CTM-xx=1,2,3,4,5,6,7,8,9

CTM-x17x=2,3

CTM-x30x=3,4

External hexagon CTM conical abutmentTemporary abutments | Caps | Cap accessories | Screws

ø3,3/ø3.75/ø4

Cap accessories

CCiCM T-2TMC T-2TML

Screws

T-3AM T-3UM T-3M T-4M

CiCMCiEM

Temporary abutments

HIInternal hexagon components

Direct-to-implant internal hexagonHealing abutments | Impression copings | Analogs | Castables

ling a

Impression copingsCubeta cerrada Cubeta abierta

Analogs

A-200 A-200/D45

Healing abutments

PC-21x PC-21x/D45X=2,4X=2,3,4,5

I-205 I-200

ø3,5 ø4,5 User guide ø3,5 ø4,5 User guide

Castables

C-202 C-202/D45

C-201 C-201/D45

Metal base

CR-202

CR-201

ts | B

all ab

es | S

User guide

Final abutments

MTC-200

Hexed components.. Non- hexed components

ø3,5 /ø4,5

Angled abutmentsAngled from the vertex

MA-250V

Angled from the side

MA-250C

CiHC CiHE

Screws

T-201 T-201ET-202 T-100

Anti-loosening

Temporary abutments

MPT-201 MPT-201/D45MPT-202 MPT-202/D45

T-2TL13 T-2TC13

Cap accessories

Ball abutments

CTR-CCTR-x00X=0,1,2,3

Internal hexagon abutmentTapered abutments | conical abutments | Analog/Castable | Impression coping | screw

ø3,5 User guide ø3,5 User guide

Tapered abutments Analog

CTC-21xX=1,2,3,4,5,6,7

Conical abutments

CTCM-xX=1,2,3

CTCM-x/D45X=1,2,3

Impression coping

Castable

Angled conical abutmentsAngled from the side

X=2,3 X=3,4

Angled from the vertex

X=2,3 X=3,4CTCM-x17V CTCM-x30V CTCM-x17C CTCM-x30C

CIInternal cone components

ling a

og | C

s | Im

es | S

1CI© BIONER. Espigolera 9 - 08960 Sant Just Desvern - Barcelona | Tel. 93 470 03 60 - Fax. 93 470 35 27 | bioner@bioner.es | www.bioner.es

CI-CiCZR CI-CiCZ

Cap accessories

CI-CCiC

CI-TxCZ

Healing abutments

CI-PCxX=2,3

Abutments

CI-MPT CI-MPT2CI-MxX=4,5.5,7

Castables

CI-C1 CI-C2

Metal base

CI-CR2CI-A

Analog

Impression coping

Internal cone abutmentAbutments | Castables | Temporary abutments

empora

Abutments

Temporary abutmentsCastables

CI-C CI-CSyn

CI-CP17

CI-P CI-PSyn CI-PSynC

CI-P17A CI-P17B

CI-MPTO CI-MPTO2

Internal cone abutmentCaps | Cap accesories | screws

es | s

3© BIONER. Espigolera 9 - 08960 Sant Just Desvern - Barcelona | Tel. 93 470 03 60 - Fax. 93 470 35 27 | bioner@bioner.es | www.bioner.es

Cap accessories

CI-CiC CI-CiE

CI-CCiC

Drivers and insertion tools

DCA-13CDCA-13MDCA-13L

*U=7 MM

*U=12 MM

*U=20 MM

DCA-12CDCA-12MDCA-12L

*U=7 MM

*U=12 MM

*U=20 MM

DCA-UCDCA-UMDCA-UL

*U=7 MM

*U=12 MM

*U=20 MM

DCA-RUMDCA-RUL

*U=12 MM

*U=20 MM

Handpiece

PHC-13PHM-13PHL-13

*U=8 MM

*U=14 MM

*U=25 MM

PHC-12PHM-12PHL-12

*U=8 MM

*U=14 MM

*U=25 MM

PUCPUMPUL

*U=8 MM

*U=14 MM

*U=25 MM

PRUMPRUL

*U=14 MM

*U=25 MM

LDR wrench

DCH-13DMH-13DLH-13

*U=8 MM

*U=14 MM

*U=25 MM

DCH-12DMH-12DLH-12

*U=8 MM

*U=14 MM

*U=25 MM

DUCDUMDUL

*U=8 MM

*U=14 MM

*U=25 MM

DRUMDRUL

*U=14 MM

*U=25 MM

Manual

CHC-13CHM-13CHL-13

*U=8 MM

*U=14 MM

*U=25 MM

CHC-12CHM-12CHL-12

*U=8 MM

*U=14 MM

*U=25 MM

CUCCUMCUL

*U=8 MM

*U=14 MM

*U=25 MM

CRUMCRUL

*U=14 MM

*U=25 MM

LCC ratchet

HEX 1.3 HEX 1.2 GRIP GRIP angled

*U= Usable length

DXL-13 *U=25 MM DXL-12 *U=25 MM DXLU *U=25 MM

Extra-large47 mm. shaft

DCA-SCDCA-SMDCA-SL

*U=9 MM

*U=13 MM

*U=21 MM

PSMPSL

*U=14 MM

*U=21 MM

DSMDSL

*U=14 MM

*U=21 MM

CSMCSL

*U=14 MM

*U=21 MM

IKELTinsertion tool

DCA-SiC DCA-SiL

*U=8 MM

*U=17 MM

PSiMPSiL

*U=11 MM

*U=18 MM

DSiMDSiL

*U=11 MM

*U=18 MM

CSiMCSiL

*U=14 MM

*U=19 MM

HIKELT insertion tool

Drivers and insertion tools

LCCLDR

LDR - LCC Adapter

DCA-PL *U=12 MM DCA-C *U=12 MM DCA-TT *U=11 MM

DCA-TxCDCA-TxMDCA-TxL

*U=7 MM

*U=12 MM

*U=20 MM

Handpiece

PMP *U=14 MM PMC *U=14 MM PCTT *U=14 MM

PTxCPTxMPTxL

*U=8 MM

*U=14 MM

*U=25 MM

LDR wrench

DLP *U=14 MM DLC *U=14 MM DCH-18 *U=9 MM DCTT *U=14 MM

DTxCDTxMDTxL

*U=8 MM

*U=14 MM

*U=25 MM

Manual

CTxCCTxMCTxL

*U=8 MM

*U=14 MM

*U=25 MM

LCC ratchet

Slot Squared HEX 1.8 TUBULARStar

*U= Usable length

DXP *U=25 MM DXC *U=25 MMDXLTx *U=25 MM

Extra-large47 mm. shaft

Brochure design: Bernat Sarrias | bernat.sarrias@gmail.com 2012-1-1

the future is our - BionerImplant types and dimensions I mplant t ypes and dimensions 2 IMP P 2,7...

Documents

IMG 0005-ocr · 2019-09-12 · O Reference Data ARITHMETIC CORE INSTRUCTION SET RV64M Multiply Extension DESCRIPTION (in Verilog) * R[rdJ * NOTE 1,2) 7,8) 2,7) 2,7) 2,7) 2.7) 29)

Membrane-enclosed multienzyme (MEME) synthesis of 2,7 ... › portal › services › download... · Membrane-enclosed multienzyme (MEME) synthesis of 2,7-anhydro-sialic acid derivatives

Get various ypes of carbide products at kone carbide tool ltd

MOLDES DOBLES - moldeadosartesanos.es dobles.pdf · md-576 2,7 € 160x130x75 md-578 2,7 € 115x95 md-581 2,7 € 160x80 md-582 2,7 € 115x55 md-583 1,8 € 80x40x40 md-577 3.8

Petrobras turns around - WordPress.com...Gazprom Sinopec PetroChina CNOOC BP Chevron ExxonMobil Shell Petrobras 1,1 2,0 1,4 2,2 2,7 0,7 0,3 1,4 1,5 2,2 2,5 3,5 N.A rs e ians ers Net

Author Manuscript NIH Public Access ,1, ,2,7, Joshua E ... Manuscript NIH Public Access ,1, ,2,7, Joshua E ... ... and

Product Overview - huber-online.com · Product Overview high precision thermoregulation. ... 250 55 0,91 1,5 / 3,0 0,7 0,7 0,7 0,7 0,4 0,06 426 x 270 x 631 1000.0016.01 3 Unistat

CRAFTED COCKTAILS · Sailor Jerry 0,7 l 996 84, € WHISKY / WHISKEY Jameson 990,7 l 6 71, € Jameson 1,0 l 10 101,99 € Chivas Regal 12 Y.O. 0,7 l 996 96, € Monkey Shoulder 0,7

07 ypes 01 T oup A Gr

IMG 0005-ocr€¦ · O Reference Data ARITHMETIC CORE INSTRUCTION SET RV64M Multiply Extension DESCRIPTION (in Verilog) * R[rdJ * NOTE 1,2) 7,8) 2,7) 2,7) 2,7) 2.7)

high precision thermoregulation - rcprocess.se · Unistat® tango® wl -45...250 55 0,91 1,5 / 3,0 0,7 0,7 0,7 0,7 0,4 0,06 426 x 270 x 631 1000.0017.01 3 Unistat

+* 0 (7$/ 0 $18)$&785,1* ,0,7('hgmetal.listedcompany.com/newsroom/20210223_172421_BTG_7...2021/02/23 · 0(7$/ 0$18)$&785,1* /,0,7(' )LQDQFLDO 6WDWHPHQWV DQG 'LYLGHQG $QQRXQFHPHQW

Crédit photo Gilles Ayotte - Maintenance - CRAAQ · 2017-03-01 · Maïsmoulu 23,4 26,9 23,4 26,9 23,4 Fin gluten 2,7 2,2 2,7 2,2 2,7 Tourteau de soya 1,8 - 1,8 - 1,8 FP : Fléole

Designer PRO T O T YPES - Amazon Web Services · PRO T O T YPES. DESIGNING WITH PROTOTYPES. Story Time. Photo for illustrative purposes only. Sorry to random kids and their robots

Membrane-enclosed multienzyme (MEME) synthesis of 2,7 ......Sialic acid enzymatic synthesis Ruminococcus gnavus Intramolecular trans-sialidase 2,7-anhydro-Neu5Ac 2,7-anhydro-Neu5Gc

BILPRISER - November 2001 Opplysningsrådet for ... · allroad 2,7 v6 quatt b stv 5 6/2671 184/250 6 759.000 allroad 2,7 v6 lr qu b stv 5 6/2671 184/250 6 770.200 allroad 2,7 v6 qu.ti

T HE D IFFERENT T YPES OF _ _

IMG 0005-ocr · 2017. 6. 17. · O Reference Data ARITHMETIC CORE INSTRUCTION SET RV64M Multiply Extension DESCRIPTION (in Verilog) * R[rdJ * NOTE 1,2) 7,8) 2,7) 2,7) 2,7) 2.7) 29)

FEELING HUNGRY? · 2020. 9. 14. · Vodka Absolut 0,7 l 1.395 kn 1,5 l 2.910 kn 4,5 l 8.555 kn Vodka Absolut ELYX 0,7 l 1.665 kn 1,5 l 3.785 kn 4,5 l 9.875 kn Vodka Belvedere 0,7

IMPLANTOLOGIA - Medipro International - MEDESY CAT... · osteotomes, double lock osteotomi, doppio fissaggio 1307/1b ø 2,7 mm 1307/1bcc ø 2,7 mm 1307/1rrt ø 2,7 mm 1307/1rrc