View
3
Download
0
Category
Preview:
Citation preview
The shaded areas of the map indicate ESCAP members and associate members
The Centre for Sustainable Agricultural Mechanization (CSAM), is a regional institution of the United Nations Economic and Social Commission for Asia and the Pacific (ESCAP), based in Beijing, China. CSAM started operations in 2004, building on the achievements of the Regional Network for Agricultural Machinery (RNAM) and the United Nations Asian and Pacific Centre for Agricultural Engineering and Machinery (UNAPCAEM). CSAM serves the 62 members and associate members of ESCAP.
The vision of CSAM is to achieve production gains, improved rural livelihood and poverty alleviation through sustainable agricultural mechanization for a more resilient, inclusive and sustainable Asia and the Pacific.
The Secretariat of the Asian and Pacific Network for Testing of Agricultural Machinery (ANTAM) is based at CSAM. CSAM is the executing agency of ANTAM. The ANTAM Secretariat assists and coordinates the operation of the network, and provides necessary logistical and administrative support.
The designations used and the presentation of the material in this publication do not imply the expression of any opinion on the part of the ESCAP Secretariat concerning the delimitation of its frontiers or boundaries. Any mention of firm
names and commercial products do not imply the endorsement of ESCAP/CSAM.
ANTAM TEST REPORT
Approval Number:
Date of Approval: Report on test in accordance with ANTAM Test Code (Please insert number of the Code)
Make /model of power tiller
Report number:
Month of the test: ………, year
PHOTO of power tiller
Add Testing institution logo
Testing station -Name -Address -Contact
ANTAM TEST REPORT
Remarks
• This test report provides the results of the tests conducted in accordance with
the ANTAM Test Code.
• This report is invalid without the official stamp of ANTAM.
• Any amendment to this document is not allowed.
• The data given in this report pertain to the particular machine submitted by the
manufacturer/applicant for the test.
ANTAM TEST REPORT
Power tiller
Make
Model
Trade Mark
ANTAM Test Code
Type of Test (Commercial/confidential)
Authorized test center
Name
Address
Contact Details
Manufacturer
Name
Address
Contact Details
Test Location
Period of Test Month/ Year
Year of Manufacturing
Serial number of Power tiller
Engine
Power tiller
Date of Receipt
Submitted by
Name
Contact No.
Received by
Name
Contact No.
ANTAM TEST REPORT
SELECTED CONVERSIONS
S. No Units Conversion Factor
1 Force
1 kgf 9.80665 N
2.20462 lbf
2 Power
1 hp 1.01387 metric hp (ps)
745.7 W
1 ps 735.5 W
1 kW 1.35962 ps
3 Pressure
1 psi 6.895 kPa
1 kgf/cm2 98.067 kPa = 735.56 mm of
Hg
1 bar 100 kPa = 10 N/cm2
1 mm of Hg 1.3332 m-bar
ANTAM TEST REPORT
Table of contents
S. No. Name of test Page
1 Checking of Specifications
2 Engine tests
3 Rotary shaft test
4 Vibration test
5 Drawbar test
6 Turning ability test
7 Parking brake test
8 Noise test
9 Waterproof test
10 Safety checks
11 Repair and adjustment during tests
12 Remarks and suggestions
ANTAM TEST REPORT
1. CHECKING OF SPECIFICATIONS
1.1 Power Tiller
Type :
Make :
Model :
Serial number :
Year of manufacturing :
1.2 Engine
Type :
Make :
Model :
Serial number :
Year of manufacturing :
Engine rated speed (recommended by :
manufacturer) (rpm)
Power at rated speed (kW) :
Country of origin :
1.3 Cylinder and Cylinder Head
Configuration
(vertical/horizontal)
Bore/stroke,
(mm)
Capacity
(cc)
Compression
ratio
Type of combustion
chamber
1.4 Fuel System
Capacity of
fuel tank,
(l)
Type of fuel
filter
Injector
Type Manufacturer’s
recommended pressure (MPa)
1.5 Governor
Type Governed range of engine
speed (rpm)
Rated engine speed (rpm)
ANTAM TEST REPORT
1.6 Air Cleaner
Type Location of air intake (in case
of no pre-cleaner)
Oil sump capacity (l)
1.7 Exhaust
Type of silencer:
Location:
1.8 Lubrication Type : Oil sump capacity (l) :
1.9 Cooling System
Type Details of pump and fan, if
available
Coolant capacity (l)
1.10 Electrical System
Voltage (V) Generator (make, type)
Output power of generator ( W)
Details of
headlights
(number, Watt)
Details of starter, If
available
1.11 Power Transmission System
Type of gearbox Grade of Oil Oil capacity (l)
Type of main clutch Type of steering clutch
Gear Number Nominal travel speed at rated engine……rpm, km/h
Forward L1
L2
L3
H1
H2
H3
Reverse L
H
ANTAM TEST REPORT
1.12 Rotary Shaft/PTO
Location Number of splines Diameter of shaft (mm)
Height above ground (mm)
Direction of rotation
(viewed from
driving end)
Rotary shaft speed
at rated engine
speed (rpm)
Type of power
transmission
system (gear/chain)
Number/ type/arrangement for
fitting of tynes on the shaft
1.13 Main Pulley
Type and
number of belts
Diameter of
pulley (mm)
Location
(left/right) Reduction ratio (from
engine to clutch)
Rotational speed at rated
engine speed (rpm)
1.14 Hitch
Type (Number of holes and diameter) Height above ground level (mm)
Minimum Maximum
1.15 Parking Brake
Type:
Method of operation:
1.16 Wheels Tyre
Make Number Size/Ply
rating
Recommended inflation
pressure (kPa)
Track width, mm: Method of
changing track width
Field work transport
Steel/cage wheel:
Size Mass (kg) Track width (mm)
Diameter (mm) Width (mm)
ANTAM TEST REPORT
1.17 Operator Seat
Type:
Type of suspension:
Range of adjustment (if any) (mm):
1.18 Ballast Mass
Optional ballast Water (kg) Cast Iron Weight on Wheel (kg)
1.19 Mass of Power Tiller (without driver but with all lubricants, fuel and coolant full)
Total (kg) With ballast Without ballast
1.20 Overall Dimensions
Length* (mm) Width* (mm) Height* (mm) Ground Clearance** (mm)
Measure: * the outermost points ** at portal housing drain plug
1.21 Fuel and Lubricants used for test
Fuel Type Density at 15 °C
Lubricants Engine Transmission
Type Grade Type Grade
ANTAM TEST REPORT
2. ENGINE TESTS
Date and place of test:
Type of dynamometer:
Power
(kW)
Crank
Shaft
Torque
(Nm)
Engine
Speed
(rpm)
Fuel Consumption Specific
Energy
(kWh/l)
Temperature (0C) Atmospheric
Conditions
Hourly
(kg/h)
Specific
(g/kWh)
Fuel Engine
oil
Intake
air
Coolant Air
exhaust
Temp
(0C)
RH
(%)
Pres
sure
(kPa)
Maximum Power – 2-hour test
Power at Rated Engine speed
Varying speed at full load
Varying Load Test
a) Torque corresponding to maximum power at rated engine speed
b) 85% torque obtained in (a)
c) 75% torque obtained in (b)
d) 50% torque obtained in (b)
e) 25% torque obtained in (b)
f) No load
Five hour engine rating test
90% load corresponding to maximum power (first 4 hour)
Load corresponding to maximum power (last one hour)
ANTAM TEST REPORT High Ambient Temperature Test
Power
(kW)
Crank
Shaft
Torque
(Nm)
Engine
Speed
(rpm)
Fuel Consumption Specific
Energy
(kWh/l)
Temperature (0C) High
Ambient
Conditions Hourly
(kg/h)
Specific
(g/kWh)
Fuel Engine
oil
Intake
air
Coolant Air
exhaust
Temp
(0C)
RH
(%)
Pres
sure
(kPa)
Maximum Power Absolute
Maximum Power at Rated Engine Speed
Varying Speed at Full Load
a) Coolant consumption (l/kWh): b) Specific lubricating oil consumption (g/kWh):
ANTAM TEST REPORT
3. ROTARY SHAFT TEST
Date and place of test:
Type of dynamometer:
Sl. No.
Tests Rotary Shaft
Power
(kW)
Rotary Shaft
Torque
(Nm)
Engine Speed rpm
Fuel Consumption
Specific Energy
(kWh/ l)
Temperature
(oC )
Pressure (kPa)
Atmospheric Conditions
Hourly
(g/h)
Specific
(g/kWh)
Fuel Engine Oil
Exhaust Intake air
Coolant Rotary Shaft Oil
Temp
Intake Air
Exhaust Gas
Lub Oil Temp
(oC)
i) Varying engine speed at full load i) ii) iii) etc
Five hours test at rated power of rotary shaft a) At load corresponding to 90% of maximum power (4 hours): i) ii) iii) etc b) At load corresponding to maximum power i) ii) iii) etc
ANTAM TEST REPORT 4. VIBRATION TEST
Date of test :
Type of instrument :
Location of test :
S.
No. Measuring points
Acceleration
(m/s2)
HD* VD**
1 Steering handle Left arm grip
Right arm grip
2 Operator’s seat (without operator)
3 At main frame where engine mounted
* HD: horizontal direction
** VD: vertical direction
ANTAM TEST REPORT 5. DRAWBAR TEST
Type of track:
Height of drawbar point above ground:
Maximum Power test (power tiller un-ballasted)
Gear Number Travel
Speed
(km/h)
Drawbar
Pull (kN)
Drawbar
Power
(kW)
Whee
l Slip
(%)
Engine
Speed
(rpm)
Fuel
Consumption
Specific
energy
(kWh/l)
Atmospheric Conditions
(kg/h) (g/kWh) Temperature
(0C)
Pressure
(kPa)
RH
(%)
ANTAM TEST REPORT
6. TURNING ABILITY TEST
Description
Minimum Turning Diameter
(mm)
Minimum Turning Space
(mm)
RHS LHS RHS LHS
Track width, ----- (mm)
with steering clutch
7. PARKING BRAKE TEST
Observation Facing up Slope (….. slope)
Facing Down Slope (….. slope)
Parking device control force (N) Whether rolling of braking wheels noticed Yes/No Yes/No
Efficacy of brakes Yes/No Yes/No
8. NOISE TEST
Brief Description of the Silencing System/muffler:
Sound Level Meter
Type Make Model
At By-stander Position
Background Noise Level, dB (A):
Atmospheric Conditions:
Temperature (0C) Relative humidity (%) Pressure (kPa)
S. No. Gear Used Engine Speed (rpm) Noise Level* (dB (A))
* Maximum sound pressure level
(Optional)
S.
No.
Gear
Used
Engine
Speed
(rpm)
Sound Pressure Level (dB)
Centre frequency (Hz)
31.5 63 125 250 500 1000 2000 4000 8000
ANTAM TEST REPORT At Operator Ear Level
Background Noise Level (dB (A)):
Atmospheric Conditions:
Temperature (0C) Relative humidity (%) Pressure (kPa)
Gear Number Travel Speed
(km/h)
Engine
Speed (rpm) Slip (%) Drawbar Pull (kN)
Sound Level*
( dB (A))
* Maximum value
9. WATERPROOF TEST
S. No. Components Ingress of Water
1 Axle Yes/No
2 Gear box Yes/No
10. SAFETY CHECK
Guards
S. No. Moving Parts Guarded or Safely Located
1 PTO shaft Yes/No
2 Main pulleys Yes/No
3 Flywheel Yes/No
4 Rotary chains Yes/No
5 Belts Yes/No
6 Rotary tiller Yes/No
S. No. Hot Parts Guarded or Safely Located
1 Exhaust silencer Yes/No
2 Exhaust manifold Yes/No
3 Any others Yes/No
Controls
S. No. Controls Identifiable or Displayed
1 Clutch lever Yes/No
2 Brake lever Yes/No
3 Throttle Yes/No
4 Lever to stop engine immediately Yes/No
5 Main gear shifting lever Yes/No
6 High/low gear shifting lever Yes/No
7 Rotary engaging lever Yes/No
8 Steering handle with side clutch lever Yes/No
9 Tail wheel height adjusting lever Yes/No
ANTAM TEST REPORT
11. REPAIRS AND ADJUSTMENTS DURING TEST
12. REMARKS AND SUGGESTIONS
Signature of test engineer Signature of Head of Testing Station
Address: Address:
Date:
Official seal/stamp of the testing station
ANTAM TEST REPORT
Curves of Engine Performance Test (Natural and High Ambient)
ANTAM TEST REPORT
ANTAM TEST REPORT
Curves of Rotary Shaft Test
ANTAM TEST REPORT
ANTAM TEST REPORT
Curves of Drawbar Performance Test
Drawbar Pull, kN
L1
L2
ANTAM TEST REPORT
Recommended