Technology that optimises water distribution networks

Technology that optimises water distribution networks

THE IMPORTANCE OF OPTIMISING WATER PRESSURE

PRESSURE MANAGEMENT CHALLENGE

BASIC PRESSURE MANAGEMENT

+ Fixing pressure at the PRV outlet

+ Leads to excessive pressure 100% of the time at critical point

+ Potential response: basic time & flow modulation

+ Weak control of pressure vs target

+ Inability to respond and adapt to changing network circumstances

ADVANCED PRESSURE MANAGEMENT

+ Total visibility into network performance

+ Remote management of pressure

+ Automatically and continuously optimised pressure based on demand patterns

+ Delivers the right pressure (and no more) in the network all the time

ADVANCED PRESSURE MANAGEMENT ARCHITECTURE

ADVANCED PRESSURE MANAGEMENT ARCHITECTURE

ADVANCED PRESSURE MANAGEMENT ARCHITECTURE

ADVANCED PRESSURE MANAGEMENT ARCHITECTURE

ADVANCED PRESSURE MANAGEMENT ARCHITECTURE

ADVANCED PRESSURE MANAGEMENT ARCHITECTURE

ADVANCED PRESSURE MANAGEMENT ARCHITECTURE

1. Controller

2. APV

3. PRV

i2O SYSTEM – PRV CONTROL

i2O PRV control hardware

+ Remote control, optimisation and monotoring of all diaphragm actuated PRVs

+ Smooth and reliable control and monitoring

+ Simple installation takes 1.5hrs by network technicians

1

2

3

i2O SYSTEM – PRV CONTROL components

Controller+ Logs pressure and flows with high accuracy+ GPRS and Bluetooth communication+ Low power consumption – 5 year battery life+ Robust, waterproof enclosure

APV (Advanced Pilot Valve)+ Accurate control over 32m range+ Smooth preassure change – no surge+ Any PRV

Critical Point Logger+ Logs pressure with high accuracy+ GPRS and Bluetooth communication+ Low power consumption – 5 year battery life+ Robust, waterproof enclosure

i2O SYSTEM – SOFTWARE INTERFACE

+ Secure

+ Integrated system – see data and act on it

+ Scalable throughout the business

+ Quick and easy to implement

+ Cost effective

i2O SYSTEM – NETWORK MONITORING

ADVANCED PRESSURE MANAGEMENT

+ Remote pressure optimisation

+ Remote diagnostics

+ Quick DMA set-up and installation

+ Scheduled pressure control

+ Scheduled alarm control

i2O – Worked Example :Implementation

Flow

(l/s

)/Pr

essu

re (m

)

Time

LEAKAGEREDUCTION

+ Each percentage point of pressure reduction in a water network leads to a corresponding decrease in leakage

+ i2O’s solutions have reduced leakage by 10 to 50% in hundreds of water networks.

Syabas: 35.4 MLD reduction in 178 DMAs

BURSTFREQUENCYREDUCTION

After i2OBefore i2O

+Minimizing pressure peaks and softening fluctuations reduces the frequency of bursts

+ i2O’s solutions have reduced burst frequency by 40% or more in customers’ water networks.

Veolia Water UK installation

LOWEROPERATINGCOSTS

+ Remote monitoring gives managers visibility to network performance and events from any online connection or location

+ Remote PRV control eliminates site visits to adjust PRVs manually

+ Reduced leakage and bursts decrease need for ‘find and fix’ activity

+ Early detection of asset degradation reduces need for routine maintenance visits

IMPROVEDCUSTOMERSERVICE LEVELS

+Many water networks’ service levels suffer during peak demand, leading to complaints and fines.

+ i2O’s solutions maintain the right pressure, without abrupt changes, minimising customer service problems.

ENERGYSAVINGS

+ The lower the water pressure you supply to a network, the lower your energy consumption

+ Installed on pumps with variable speed drives, Advanced Pressure Management from i2O can reduce energy consumption by more than 20%

APA Nova Ploiesti (Romania) installation

EXTENDEDMAINSLIFETIMES

+Many water networks are at or near their service lifetimes

+ Burst frequency is the key trigger for capital-intensive pipe replacement investments

+ Reduced burst frequency significantly extends pipe lifetimes

i2O WORLDWIDE900+ systems installed in 40 utilities in 21 countries

i2O MALAYSIA

4 systems10.36 Ml/d

3 systems1.21 Ml/d

Logging in progress1 system + 3 reservoir

sensors

229 systems51.36 Ml/d

6 systems3.59 Ml/d

8 systems2.78 Ml/d

Total 251 systemsSaving 69.5 Ml/d

+ Advanced Pressure Management technology is quick to implement: Under 2 hours

+ Rapid NRW reduction: Over 69 Ml/d

+ Deferred capital expenditure needed for new water plant

+ Average payback for Malaysian Water Companies: 5 months

IMPLEMENTING i2O SOLUTIONS IN MALAYSIA

SYABAS

+ Largest water concessionaire in Malaysia (supplies 7 million consumers)

+ Cut leakage by 40 million litres per day

+ Reduced burst frequency by 48%

+ Expanded Advanced Pressure Management from 50 to 100 to 200 installations over 2 years

ADVANCED PRESSURE MANAGEMENT EXAMPLES

ADVANCED PRESSURE MANAGEMENT EXAMPLES

Manila Water

+ Serves more than 6 million consumers in Manila, Philippines

+ 10 MLD pump station cut energy consumption 24% on weekends, 14% on weekdays

+ Cut network leakage by 800,000 litres per day on weekends, 500,000 liters per day on weekdays

+ Radically improved level of service from network pumps (failed daily prior to i2O installation)

ADVANCED PRESSURE MANAGEMENT EXAMPLES

Veolia Water

+ Provides water and wastewater services throughout the UK

+ Achieved savings on operational costs of 80%

+ Improved customer service

+ Reduced water loss from eight “problem DMAs” by more than 1.5 MLD

Q3 -2010 Q4 - 2010 Q1 - 2011 Q2 - 2011 Q3 - 2011 Q4 - 2011 Q1 - 2012 Q2 -20120.000

0.010

0.020

0.030

0.040

0.050

0.060

0.070

DMAs without a PRV DMAs with a PRV (non i2O) DMAs with a PRV (i2O)

During the two last years the number of mains repairs was reduced by nearly 75% in DMAs equipped with i2O systems.

ADVANCED PRESSURE MANAGEMENT EXAMPLES

+ Number of mains repairs (per thousand properties) identified by type of pressure management

ADVANCED PRESSURE MANAGEMENT EXAMPLES

NWC and Jeddah City Business Unit (JCBU)

+ Advanced Pressure Management pilot on two District Zones

+ Systems installed and optimised in 2 days

+ 20% pressure reduction

+ 10% leakage savings

+ 40% reduction in pipe bursts

+ Remote control capability improved efficiency

+ Enhanced benefits for District Zones with continuous supply

ADVANCED PRESSURE MANAGEMENT EXAMPLES

NWC and Jeddah City Business Unit (JCBU) Change from a fixed PRV outlet to a flow modulated pressure within the Zone

Pressure is stabilized at critical point inside the Zone

PROVEN RETURNON INVESTMENT

+ i2O customers typically achieve ROI within 6-12 months

Sources of ROI Typical Benefit

Leakage reduction 20%

Burst reduction 40%+

Operating cost reduction 40% less ‘find and fix’; Fewer scheduled visits

Customer satisfaction improvement Reduce network-related complaints

Energy savings 20%

Asset lifetime improvement 5+ years