Stucki Bearing Poster

Stucki Brake Beam—Angle Corrected, Reversible Strut

Stucki Extended Travel—Metal Capped

Stucki Standard Travel—Metal Capped

Resilient Friction Elements

Height & Wear Indicator Inspection Additional Wear Indicator Inspection

Setup Height Measurement & AdjustmentHydraulic StabilizersPlates & Wedges

Inspection and Maintenance ChartStucki Standard Travel—Dual Action

Model ISB-125400 lb. Preload

Model ISB-9DR4500 lb. Preload

Model ISB-104500 lb. Preload

Stucki Standard Travel—Nonmetal Capped

Model 656-CR6000 lb. Preload

Model 690-RL3600 lb. Preload

Model 688-BR6000 lb. Preload

Tank Car Options

Model 675-RL3000 lb. Preload

Model 685-RM4500 lb. Preload

Model 656-CRH5400 lb. Preload

RetroXT LP Bolt−On

For most Standard and Extended (long) Travel metal capped bearings, a quick reference visual height indicator is shown for at-a-glance checking. (Side bearings are shown at free height.)

Brake beams available with replaceable heads, optional reversible strut, and diagonally corrected end extensions. (See A. Stucki Product Guide for more information. Also refer to AAR Rule 6 in the Field Manual for inspection and wear limit criteria.)

Upgrade to extended travel with RetroXT 5400C

Used for Barber Trucks Used for Ride Control Trucks Used for Super Service Ride Control Trucks

Used for Barber S-2-HD Trucks Used for Super Service Ride Master Trucks

Upgrade to extended travel with RetroXT 5400B

Upgrade to extended travel with RetroXT 5400B

Upgrade to extended travel with RetroXT 4500

Upgrade to extended travel with RetroXT 5400B

Upgrade to extended travel with RetroXT 5400C

Standard Travel—Metal Capped,Extended Travel—RetroXT 4500,

5400B, 5400C

Setup is at 5-1/16” when top of cage is aligned at lateral center of top notch.

Extended Travel—CCB

Setup is at 5-1/16” when top of cage is aligned with bottom of cap cutout.

Extended Travel—Metal Capped Retrofit, LP, SP

Setup is at 11/16” when bottom edge of cap is aligned with base step.

Extended Travel—Metal Capped LPC

Setup is at 11/16” when cap step is aligned with top of base.

Method 1 Method 2 Method 3

For field inspection criteria, refer to Rule 62 in the AAR Field Manual.

RetroXT LP Drop−In RetroXT LPCRetroXT SP Drop−In

tel. 412.771.7300 www.stucki.com

Wedge Style RetroXT LP, SP, and LPC CSB and SSB

Stucki Extended Travel—Metal Capped Retrofit

RetroXT 5400B RetroXT 5400CRetroXT 4500

Nominal11/16"

Tolerance±1/16"

Nominal3/4"

Tolerance±1/16"

Field Setup HeightShop Setup Height

RetroXT LPC (Measurement Method 1)

New Nonmetallic LinerMetal or Used Nonmetallic Liner

11/16"Nominal

±1/8"Tolerance

Nominal11/16"

Tolerance±1/16"

Nominal3/4"

Tolerance±1/16"

RetroXT SP and LP (Measurement Method 2)

Shop Setup Height Field Setup Height

Metal or Used Nonmetallic Liner New Nonmetallic Liner

11/16"Nominal

±1/8"Tolerance

Nominal5-1/16"

Tolerance±1/16"

Nominal5-1/8"

Tolerance±1/16"

All Remaining Side Bearings (Measurement Method 3)

Shop Setup Height Field Setup Height

Metal LinerElastomeric Liner or Lube Disc

5-1/16"Nominal

±1/8"Tolerance

Model SSB® Model CSB® Model CCB HydraShox™Gold Series

HS-7-100 HydraShox™ Platinum Series

RFE-16 RFE-18 RFE-26 RFE-41 RFE-53

Note: To order cage or side bearings, state Model Name + Preload + XT

2600 Neville Road • Pittsburgh, PA 15225 • tel. 412.771.7300 • fax 412.771.7308 • sales@stucki.com For more information, refer to the A. Stucki Co. Product Guide. www.stucki.com Rev. 2 - 1/08

Ride Control and Super Service Ride Control are federally registered trade marks of ASF-Keystone, Inc. Barber is a federally registered trade mark of Barber, Inc. | Using any other manufacturer’s parts on A. Stucki Company products will void all warranties.

Using any other manufacturer’s parts on A. Stucki Company products will void all warranties.