Spec Sheet - Stickmate LX 235 AC

Preview:

Citation preview

8/7/2019 Spec Sheet - Stickmate LX 235 AC

http://slidepdf.com/reader/full/spec-sheet-stickmate-lx-235-ac 1/2

230 Volt

STICKMATE®

LX 235 ACAC Stick (SMAW) Arc Welding Power Source

Applications:

Farms HobbyistsRanches MaintenanceOrnamental Iron IndividualsGarages

Includes:15-ft. (4.5 m) electrode cable with heavy-duty holder10-ft. (3 m) work cable with clamp5-ft. (1.5 m) power cord with plug

Rated Welding Output

225 A at 25 VAC,20% Duty Cycle at 60 Hz15% Duty Cycle at 50 Hz

Max. Open-Circuit Voltage

80 V

Welding Amperage RangeHigh Low

40 –235 A 30 –150 A

Amps Input at Rated Output,230 V, 50/60 Hz

47.5

Dimensions

H: 18-3/4 in. (476 mm)W: 12-3/4 in. (323 mm)D: 17-1/2 in. (445 mm)

NetWeight

85 lb.(39 kg)

Accu-Set is an exclusive design for accurately controlling amperage or heat output. As you turn the Accu-Set ™ control,the indicator more clearly shows the amperage setting.

The precise control of the STICKMATE LX allows the operator to adjust output by as little as 1-amp increments.Users can always get the exact heat they need, unlike the step control design on competitive products.

Allows you to quickly select low or high range without adjusting the output leads.

100 amps AC.

With two AC ranges to select from, you have greater control of weld performance.

Varnish protects and lengthens the life of the coils inside for increased reliability.

The cooling fan runs continuously and helps to extend the life of the power source.

Five-year warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers);

and one year on guns.

Accu-Set™ amperage indicator

Infinite current control

Output selector switch

High 100% duty cycle rating

Two AC output ranges

Fully varnished magnetic coils

Forced-draft cooling fan

Hobart’s 5/3/1 Warranty

211753Nov. 2010

Certified by Canadian Standards Association to both the Canadian and U.S. Standa

Features Benefits

Specifications (SUBJECT TO CHANGE WITHOUT NOTICE.) 

The STICKMATE® LX 235 AC Stick welding powsources have the control to get the exact heat

you need— always. Also, these machines allowweld time to increase when amperage decreases

They have the range and muscle to handle manyStick welding, hard surfacing, and cutting jobs.At the same time, they have the precision for lowhydrogen and special alloy electrodes.

Accu-Set™ design provides accurate heat controlwith infinite amperage control. Additionally, theSTICKMATE LX allows a higher duty cycle whenamperage decreases, unlike some competitiveproducts in the market.

#500420

8/7/2019 Spec Sheet - Stickmate LX 235 AC

http://slidepdf.com/reader/full/spec-sheet-stickmate-lx-235-ac 2/2

1

2

3

1. Power Switch2. Selector Switch3. Amperage Adjustment Control

ELECTRODE POLARITY CHART

      E      L      E      C      T      R      O      D      E

      D      C      *

      A      C

      P      O      S      I      T      I      O      N

      U      S      A      G      E

      P      E      N      E      T      R      A      T      I      O      N

7024 EP, ENFLAT

HORIZ.FILLET

LOW

MIN. PREP, ROUGH,HIGH SPATTER

SMOOTH, EASY,FASTER

CAST IRON

6011 EP ALL DEEP

EP ALL LOW

6013 EP, EN ALL LOW GENERAL

7014 EP, EN ALL MED. SMOOTH, EASY, FAST

7018 EP ALL LOW LOW HYDROGEN,STRONG

308L

*EP = ELECTRODE POSITIVE (REVERSE POLARITY)EN = ELECTRODE NEGATIVE (STRAIGHT POLARITY)

EP ALL LOW STAINLESS

6010 EP ALL DEEP—

Ni-Cl

ELECTRODE/AMPERAGE CHART

      E      L      E      C      T      R      O      D      E

DIAMETER

IN

7024

6010&

6011

3/321/8

5/32

3/321/8

5/323/16

3/321/8

5/323/16

1/165/643/321/8

5/323/163/321/85/32

3/321/8

5/32

3/321/8

5/32

6013

7014

7018

Ni-Cl

308L

2.43.24.04.8

1.62.02.43.24.04.82.43.24.0

2.43.24.0

2.43.24.0

2.43.24.04.8

2.43.24.0

MM M      I      N .

      M      A      X .

      5      0      A

      1      0      0      A

      1      5      0      A

      2      0      0      A

AMPERAGE RANGE

Hobart Welders An Illinois Tool Works Company hobartwelders.com

Hobart Welding Products Service 800-332-3281 Sales 800-626-9420

Litho in USA

Control PanelElectrode Charts

DUTY CYCLE CHART

250

300

100

150

200

15 20 4025 50 60 70 80 90100

    W    E    L    D    I    N    G    A    M    P    E    R    E    S

% DUTY CYCLE

RATED OUTPUT

30

Performance Data

PowerSource

Stick (SMAW)

Work Clamp

Stick Electrode

Basic Equipment Setup Accessories

Running Gear#043927Mounts easily to unitand provides convenientportability, with variousmounting options tosuit user preference.Includes two wheels,two feet and a handle.

Recommended