View
2
Download
0
Category
Preview:
Citation preview
Containers& Storage
FILL
LOAD
EMPTY
CONTAIN
Powder Handling Solut ions
SOLUTIONS for
01
AVAILABLE
CUSTOM
MADE
Means that the equipment can beinstalled in ATEX zone
Means that design and options can be customised
Means that the equipment is availablefor testing at PALAMATIC PROCESS
CONTENT
I CONTAINER SOLUTIONS 04
Steel and stainless steel containers 04
Customized containers 07
Container options 08
Polyethylene containers
Container filling station 12
Manual system
Automatic system
Case studies
Container discharging station 18
Technical characteristics
Examples of implementations 20
Container blending station 22
Container washing station 24
Complete solutions 26
I 28
I SILOS SOLUTIONS 30
Rigid silos 30
Equipment for silo 32
Flexible silos
I 38
I 40
in the design of the facilities listed in this commercial documentation
RecommendedCAPTION: According to application x
Range of Solutions
500 to 2.500 l.Storage and
transport without deterioration or contamination
Steel Stainless steel
1.000 to 1.800 l.Storage and trans-port of corrosive or
food grade materials
Polyethylene
+/- 1%Accurate dosing
and absolute hygiene
Fill
2 tons No product loss and increased productivity
Discharge
4 to 10 rev./min. Homogeneous blend without product loss
15 min. cycleInternal and ex-ternal complete
cleaning and time saving
Blend Wash
Page 04 Page 10 Page 12 Page 18 Page 22 Page 24
For Containers
www.ibc-powder-container.comDownload videos & layouts from our website02
www.ibc-powder-container.com
-
www.ibc-powder-container.com
www.ibc-powder-container.com
AVAILABLE
CUSTOM
MADE
Steel IBC
Filling station
Stainless Steel IBC
Discharging station
PEHD IBC
Blending station
Washing station
. Food
. Fine chemicals
. Pharmaceuticals
. 800 litres
. 1,000 litres
. 1,200 litres
. 1,500 litres
. 2,000 litres
. Custom made
. Chemicals
. 500 litres
xx
xx
x
x
Input TOR
Output TOR
Weight cells
Installed power (kW)
Power supply
Service pressure (bar)
Compressed air consumption (Nm³/hr)
0,2
6
0
2
0,2
6
0,9
6
Option Option -
6
8,7
6 6
0,9 6,8
F Utilities
x
Standard designCAPTION: x
F Volumes and capacities
x
xx
x
x
xx
Steel IBC Stainless Steel IBC PEHD IBC
x
xx
x
x
xx
-
F Industries
03
F Corrosion resistance to harsh environment (chemicals, textiles, petroleum...)
F Positioning brackets for stacking the containers
Advantages
F Sealing: no dust emanation thanks to tight connections
F 62° slopes to ensure the flowing of the materials when discharging
I
Manufacturing
steelFinishings: RAL 9006, blasting, electro polishing, mirror polished, teflon coating Maximun sizes of containers
Length x Width x Height
Capacity
Objectives: conditioning and conveying bulk materials without damage or contamination
solutions for the transportation, storage and dosage of your powde-red and granular products. Our containers are designed to meet perfor-mance, ergonomics and design requirements.
ContainersTechnical Characteristics
04 05
Steel - Stainless steel
knife gate valve)
Water volume in liters 800 2,000
Base dimensions in mm.
Overall height in mm. 2,067
Outlet Ø in mm. 300 300 300
increase product flow
Three level stacking(depending on container dimensions)
Secured butterfly or slide gate valve
overhead handling
Container base
stacker and pallet truck
I
.
. Can be handled with a hoist
. Stackable
. Discharge and filling with appropriate facility
Agrochemicals Agrifood Chemicals Petrochemicals Paints and dyes Pharmaceuticals and cosmetics
Fragrances and flavorings
Nuclear
I
I
B
B
C
www.ibc-powder-container.com/equipments/steel-stainless-steel-containersDownload videos & layouts from our website
AVAILABLE
CUSTOM
MADE
Ste
el -
Sta
inle
ss S
teel
IBC
facilitate the material flow (optional)
Example of «custom made »
container with introduction hatch
7 Standard Models
I
Water volume
(in litres)
Working volume*
(in litres)
Empty
weight (kg)Ø A Ø B Hd HT Hc Slope
300 0
908 778 238 300 232
300 382
300
283 300 732 2,067
300 980
2,007 300
Containers
06 05www.ibc-powder-container.fr/equipements-conteneurs/conteneurs-acier-inoxVidéos & plans téléchargeables en ligne 07www.ibc-powder-container.com/equipments/steel-stainless-steel-containers
Download videos & layouts from our website
Custom Made
container solutions to meet the needs of its customers. Their design can be simple or sophisticated depending on the nature of the powders to handle.
-rations of filling and discharging with cleaning systems, containers are used to simultaneously implement manufacturing process for optimum production.
cross contamination H
T
A
Hd
B
Hc
120
4
1204
*The working volume is provided for information purposes depending on the product material angle of repose
Steel - Stainless Steel
Ste
el -
Sta
inle
ss S
teel
IBCAVAILABLE
CUSTOM
MADE
04
OPTIONS
LAAAAAAAAAAAVAILABLAAAAAAAAAAAAAAAAVAILABLAAAAAAAAAAAVAILABLEEEEEE
CUSTOMCUSTOM
MADEMADE
F The butterfly valve allows the regulation of the material flow. The actuation of the butterfly valve is carried out manually, with a lever or a steering wheel depending on the diameter of the valve.
Steel - Stainless Steel Containers
08 09
F -
facturing.
F They facilitate the flow and the discharging of stored products.
F Dimensions and manufacturing materials on request.
-
line in partnership with our engineering department.
F For optimum flow of your materials without adherence to the walls.
your materials to the walls during the discharging operation.
F Enables simple and efficient identification of your containers.This tracking system allows, in real time, to trace the containers and all the ingredients throughout the pro-
process.
F The knife gate valve is a closing and isolating valve resistant to dust and gra-
nules.The diameter of our knife gate valves can be adapted to any type of container.
F To facilitate the handling of containers.Containers are handled via a pallet truck, a stacker, a forklift truck or a hoist.
F For efficient discharge of your industrial container.Containers associated with automatic discharge stations and fitted with knife gate valves can be remotely opened thanks to pneumatic actuators. A vibrating structure can be added to ensure the end of the discharge
F Valve for evacuation and introduction of air according to the use of the container.The valve balances the pressure for the filling and discharging phases of the container.
www.ibc-powder-container.com/equipments/container-optionsDownload videos & layouts from our website
ppppppp
F Stackable containers to F Hygienic: easy maintenance and cleaning
F Resistance to corrosion
Advantages
F Ease of handling by forklift or pallet truck
I
Manufacturing: polyethylene Very high density with a high thickness to resist shockOptional anti-static HDPE Maximun sizes of containers
Length x Width x Height
for the transport, conditioning and dosing of a large variety of powders. The advantage of polyethylene containers is that they are durable through years and reduce handling costs. are ideal for food applications. The polyethylene container is also an interesting solution for wet products due to its resistance to mold and sea salt exposition.
Containers PolyethyleneTechnical Characteristics
10 11Download videos & layouts from our website
ChemicalsAgrifoodAgrochemicals
Applications
FDA Certification F
Capacity:
Objectives: packaging and transport of corrosive or food grade materials
10
Discharging valve
flow of the materials
Valve
gate valve)
Overall height in mm. 2.280
Outlet diameter in mm. 300 300
F Possibility to customize the material outlet valve
Valve for liquid
Aluminum valve
Slide gate valve
Stainless steel valve
Removable base for replacement
AVAILABLE
CUSTOM
MADE
Pol
yeth
ylen
e C
onta
iner
s
136
0
93,1
363
60
5
106,500
JJ
Container FillingManual Version
12 13Download videos & layouts from our website
Objectives: manual and completely tight connec-tion
the transfer by gravity of your materials. This station has been designed to meet -
transfer of your material in the container to avoid any loss of product.
13Download videos & layouts from our website
Container
Slide gate valve
(Sacks feeding)
Control cabinet
Sack dump system with glove box
Sack compactor
Access platform
to weighing procedure
Manual sack dump system
Filling head manually
operated
Weight control scaleF Sack dump system dedicated to an accurate filling of containers
This container filling station is specially designed to perform the conditioning of premix. The ergonomic sack dump system ensures a tight connection without interference by the container weighing. The container is placed on a scale in order to ensure control of the introduced weight. The pre-weighed materials are mixed then.
I
The filling system is adapted to materials that are not fragile, at low flow rate and to enable an easy centering of the filling head on the container.
AVAILABLE
CUSTOM
MADEStation
Con
tain
er F
illing
1360
JJJJJJJJ
F Sealing with inflatable seal to avoid any dust emanation and product loss
F Dust cap seal to ensure containment and to allow high flow rates
F Double casing F Fake lid with inflatable
seal for total containment
Advantages
15Download videos & layouts from our website
Container FillingAutomatic Version
14
Discharging valve
Stainless steelcontainer
avoid weighing interfe-rences
Dedusting with double casing tube
Disc
Stainco
avoirenc
Ded
e
nterfe-
double ng tube
telescopic tube with metal spirals
Lifting eyes
I
1. The filling head is ready to cover the container2. The filling station is connected with the container by means of telescopic connecting sleeve (food grade manu-facturing)The transfer of the material into the container is carried out by gravity3. The transfer is stopped from the control cabinet4. The filling head comes off the container
I
The container filling system is positioned under your hopper.
The docking of the tray is provided by two pneumatic cy-linders that ensure a tight connection. The control of the connection system is carried out by the operator. Depending on the treated material, the filling head can be fitted with an inflatable seal which closes the top lid to avoid any dust emanation during the filling process.Degassing is ensured by the double casing tube.
This container filling equipment allows automatic and contained transfer of bulk materials without systematic intervention of an operator to remove or set up the docking tray.
-duces the operator’s level of exposure to potentially dangerous materials. This automated system was designed to provide a high standard of hygiene, safety, ease of cleaning and maintenance.
AVAILABLE
CUSTOM
MADEStation
Con
tain
er F
illing
Con
tain
er F
illing
1 32 4
1752
113
0 2
098
257
8
3
1212
247
8
1212
1734
16 17
Container FillingCase Studies
F
F
Customer:
Material:
Installation details:
conveyor under the discharging system. The deconditioned powder
falls by gravity into the container. A dedusting unit ensures a
healthy working environment.
F
F
Customer:
Materials:
Installation details:
-
ferent dosing devices according to the batch recipe. The containment
is performed by a dedusting ring also avoiding weighing interference.
Customer:
Materials: Spices, curry, paprika
Installation details:
This process enables the collection of spices mixings and their sie-
ving before the conditioning phase. All the materials are processed
by a rapid change of the screen.
Download videos & layouts from our website
AVAILABLE
CUSTOM
MADE
Customer: Alloy manufacturer
Products:
Installation details:
-
ped with a lump breaker and a dosing screw to guarantee
the handling and the dosing accuracy.
Station
Con
tain
er F
illing
F Vibration: electric vibrator and springs
F Pneumatic clamping
system
F Dust cap seal to ensure the tightness of the connexion
Advantages
F Weight cells to control the dosing
I Manufacturing
Containment: dust cap seal or inflatable sealCapacity: 2 tonsObjectives: Containment
when emptying containers
your production line in an efficient and hygienic way.
by our customers are numerous: increase in flow rate and productivity, impro-vement of integration controls, reduced operating costs in terms of manpower and product loss or complete unloading of containers without contamination of your materials.
19Download videos & layouts from our website
Container Discharging
I
onto the base by forklift truck
Removal of the forklift truck to unblock the area
Opening of the discharge valve to enable the flow of the material
The container is placed on the discharge station
13
42
Technical Characteristics
AVAILABLE
CUSTOM
MADE
18
Station
Con
tain
er D
isch
argi
ng
18
centerers
flexible fitting
butterfly valve
Silent block to absorb vibration
operated locking clamps
container
18 The opening of the valve can be performed automatically
Vibrating motor
F Alternative
F
Vibrating table
Flanging clamp
Options
20 21
F
F
Client:
Materials:
Installation details:
Containers of raw materials are placed above the mixer to ensure
automatic dosing with no operator’s intervention. According to the
materials, the discharging systems are fitted with vibrators and pneu-
matic hammers. Load cells built in the dump station ensure the com-
pliance with the recipe.
F
Client: Sewage treatment plant
Material: Aluminum sulphate
Installation details:
Aluminum sulphate is packaged in containers to facilitate handling
and provide maximum containment.
with the integration of a dosing screw.
Client:
Material:
Installation details:
The high capacity containers are automatically filled below the do-
sing devices of raw materials.
After the packaging operation, the containers are automatically emp-
tied above the powder mixer.
F
Examples of Installations
F Location of the water treatment plant
Container Discharging AVAILABLE
CUSTOM
MADE
Download videos & layouts from our website
Client:
Material:
Installation details:
The whole installation is composed of two complete and autonomous
skids.
The first skid incorporates a sack deconditioning system for filling
containers.
The second skid ensures the emptying of containers in a confined
manner and enables the dosing of boric acid in the dilution reactor.
Con
tain
er D
isch
argi
ng
F Variable mixing speeds depending on the products to be mixed
F Control panel: ergonomic and easy to use
F Uniform mixture of your liquids and powdered materials
Advantages
F Secure lock of the contai-
ner for a mixture without risk for operators
I
Manufacturing
All parts in contact with the material are polished.Control: fully automated system with touchscreen. Automatic accelera-tion at start and deceleration at shutdown thanks to the frequency varia-
indication, emergency stop button, the cycle time, start, pause, lock/un-lock. The mixing program can be selected from pre-programmed cycles.Engine -lutions per minuteSecurity: an immaterial barrier can be provided to ensure the safety of the operator by prohibiting the access to the system.
Rate:
Capacity:
Objectives: homogeneous mixture without material loss
Our container blending systems are specially designed for pharmaceutical and food industries where the requirements of cleanliness and hygiene are high. Our equipment offers a high mixing performance for a wide variety of powders, while maintaining the quality of your materials and avoiding the mechanical action of the standard mixers.
22 23Download videos & layouts from our website
Container Blender
I
onto the mixing platform by forklift truck
A sensor checks the locking of the facility and the closing of the conical valve
The mixing is performed by continuous rotation
of the container around its central axis
1
2
3
Technical Characteristics
AVAILABLE
CUSTOM
MADE
Con
tain
er B
lend
er
F Positioning on the structure F Rotation of the containerhe cont
F Glass door with inflatable
seals to monitor the washing process and ensure optimum sealing
F External washing nozzles
for a thorough cleaning of the F Touch screen interface that simplifies the operation of the machine. The programmable controller drives the installation
Advantages
F Inside washing of the
container using high pressure
ensure removal of residues adhe-ring to the inside of containers
I
Rate:
Manufacturing:
Pump
Washing ball: spray with pneumatic lowering system and rotation for the internal cleaning of the containerSpray Nozzles: -nal parts of the containerControl valves: -tors for the global control of the circuitHot air system: it consists of fresh air pipings, a fan and a
Drainer: full dripping tray, machining of 3 mm. thick plates
I
1. The access door (inlet side) is opened by the operator and the container is inserted into the washing cabin (positioning wedges)2. The access door locks automatically once it is closed3. The operator selects the washing and drying program4. The cleaning cycle starts5. Once the cycle is completed, the operator unlocks the access door (outlet side)6. The container is manually brought into the outside of the booth7. The access door (outlet side) is manually closed by the operator8. The following container is introduced to the washing cabin
Rate:
Capacity:
Objectives: complete cleaning of the container and time saving
-
-faces of your container are cleaned up for total hygiene.This solution promises a minimum commitment of your operators and helps you to save considerable time in the process of cleaning of your metal contai-ners.
25Download videos & layouts from our website
Container Washing
24
Supply air fan
Absolute filter
water to control the concentration of basic
agents or acids. Operation
water.
control of the washing and drying cycles
container discharge valve
the outside of the container
Access door(outlet side)
Access door (inlet side)
Technical Characteristics
AVAILABLE
CUSTOM
MADE
Con
tain
er W
ashi
ng
for the internal cleaning of the container
-grated and automated materials handling equipment. All systems for handling or recovery of bulk
to meet any specific customer applications.
mixing, filling and emptying operations.
Complete Solutions ContainersAVAILABLE
CUSTOM
MADE
PALAMATIC PROCESS turnkey installations forproduction lines using containers
F
www.ibc-powder-container.com/equipments/complete-solutionsDownload videos & layouts from our website 27
Com
plet
e S
olut
ions
26
F Customized process development according to your technical specifications.
28
F Cleaning booth F Open container for sack dischargingF Cleaning booth
F Conveying lineF
F Discover our container solutions on our
www.youtube.com/user/Palamaticpro-cess
F Container filling by pneumatic conveying
F Standard discharge station
F Cement storage
29
EXAMPLES OF INSTALLATIONS Materials conditioned in IBC Containers
F installation
F F Animal feed application
F F
F F F Sulfur packaging
F Containers
www.ibc-powder-container.com/equipments-containersDownload videos & layouts from our website
26
Rigid Silo
F Steel F Stainless Steel F Aluminum F Resin
30
Avantages
I
Volume: up to 200 mBottom: conicalDimensions
Our assembly team travels on site for mounting the silo and its accessories.
I
Rig
id S
ilo
F On foot F
bottom cover
F On terrace
your requirements for storage and distribution.Rigid silos allow contained storage of powders and high density bulk material.density bulk material.
Dedusting filter
Relief valve
Level probe
Service valve
Railing
I
I
Download videos & layouts from our website 31
F
AVAILABLE
CUSTOM
MADE
32 33
I
F Automatic butterfly
valve: ensure tightness of the silo
F Automatic slide
valve: to ensure tight-ness of the silo and to allow a full bore
F Rotary valve: to ensure tightness of the silo and product dosing
F Service valve: to isolate the silo for main-tenance operations
F Inerting and
nitrogen degassing: valves for inerting and nitrogen degassing
I
F Continuous level
probe: sets the silo fil-ling level (guided radar, cable radar)
F Level probe (all
or none): with pallet, vibration or capacitive technology
F Pressure sensor:
measuring pressure in the silo
F Oxygen sensor:
measuring the level of oxygen in the silo
F Load cells: to control the amount of material in the silo
I
F Vibrating bin aera-
tor: to ease the flow of the material with light pressures
F Bin activator: vibra-tion of the bottom of the silo for extraction
F Air cannons: high rate air injection
F Bridge breaker ham-
mer: to avoid arches
To secure access to the roof of the silo
F To release the energy generated by the explosion
the storage volumes.
Equi pment for Silo
F
F Connection for tank truck or pneumatic conveying line
F End point of pneumatic conveying system feeding the silo
The expansion chamber allows stopping the speed of the material when it arrives into the silo. The product falls as rain and prevents abrasion of the walls of the silo.
F Separating the material from the air flow
grade versions are possible.
Rigid Silo
Safety
Relief valve
Safety device to avoid rises of pressure
Download videos & layouts from our website
Rig
id S
iloAVAILABLE
CUSTOM
MADE
2726
Flexible Silo
Loading pipe Safety valve
allows storage of powders and food granules. The fabric, slightly porous and rot-proof, avoids the forma-tion of condensation inside the silo while maintaining its dustproof properties.The shape of these silos can be square or rectangular for optimal use of space and provides filling capa-
longevity.
34 Download videos & layouts from our website 35
F Porous fabric very per-meable to air to let the material breathe
F Quick and easy assembly
and disassembly due to its compact design
F low
transport costs
F Robust structure filled with
Level probe
Vibrating bottom
Options
Advantages
I
Modular frame made of hot galvanized piping
Body with fabric bag
Top made of antistatic fabric suitable to breath and filter the air when loading
Loading hose diam. 100 mm manufactured in SS304L with spherical joint 4L and sealing cap to
load the silo from a truck
Dust-proof material
Reinforced fabric, very resistant
Antistatic fabric
I
allow rapid and efficient storing of your products. Thanks to our expertise and experience, our engineers offer you complete storage projects starting from the solution development and its planification till the installation of the equipment on site.
ety valve
34
Vibrating bottom
Reinforced canvas with antistatic option
Download videos & layouts from our website
Flex
ible
Silo
A x BA x B = C
H+200
H
DimensionsA mm. 2,000 2,000 2,200 2,600
mm. 2,000 2,200 2,000 2,000 2,200 2,600 2,600
Surface C m² 3.20 3.96 6.76
m³ t. m³ t. m³ t. m³ t. m³ t. m³ t. m³ t. m³ t. m³ t. m³ t.
2.2 2.6 2.8 3.0 3.2 3.3 6.2 3.7
2,000 2.6 2.9 3.3 6.0 3.6 3.8 6.7
2,200 2.8 2.9 3.9 6.9 7.8 8.8
2.7 3.2 3.3 3.8 6.6 7.8 8.9 6.0
2,600 2.9 3.6 8.3 8.7 9.6 9.9 6.8
2,800 3.2 3.9 6.7 7.9 9.2 9.6 6.6
3,000 7.3 8.6 8.9 6 6.3 7 7.2 7.9
3,200 6.3 3.8 7.7 7.9 9.3 9.6 6.6 6.8 7.7 7.6 8.7
6.8 8.2 6 8 8.2
3,600 7.3 8.8 6.6 7.7 7.9 8.6 8.9
3,800 7.7 9.7 6.9 7.9 8.2 9.3
8.2 6 6.2 7.3 8.7
DimensionsA mm. 2,600 2,600 2,800 2,800 3,000 3,000 3,200 3,600
mm. 2,600 3,000 2,800 3,000 3,000 3,200 3,600 3,600
Surface C m² 6.76 7.80 8.96 9.00
m³ t. m³ t. m³ t. m³ t. m³ t. m³ t. m³ t. m³ t. m³ t. m³ t.
9 20 20 22 22 27
22 22 27 27 29 30 33 20
22 28 29 32 36 38 22
28 30 32 33 20 36 36 39 23 26
28 33 20 33 20 36 36 26 27 30
6,000 36 36 27 28 30
Examples of Implementations
F
F
Customer:
Product:
Installation details:
The different flour types are stored in silos connected with the mixer
by means of pneumatic transfer system that ensures the forming of
the premix.
The multi-output suction box connected to the silo bottom ensures
the feeding of three mixers.
The pneumatic suction transfer is adjusted by cyclone load cells.
Customer:
Product:
Installation details:
The storage silos ensure the storage of different raw materials for a
continuous feeding of extruders.
The silos are loaded by a pneumatic conveyor from sacks and bulk
tanks.
Download videos & layouts from our website36 37
Dimensions and CapacitiesFlexible Silo
Flex
ible
Silo
integrates com-mercial weighing systems to its equipment.
-
ideal for distributing large quantities of your powders with minimum intervention.
38 39Download videos & layouts from our website
-
-
inputs, lot traceability, operator identification and dosing reliability... The pro-duction line steering screens provide ergonomics and comfort with continuous dialogue during the project execution phase between your production team and
®
Equipment and programs used:
AUTOMATION & ELECTRICITY
41www.ibc-powder-container.com/equipments-containers/test-centerDownloadable videos & plans on our website
Our systems for containers are available for testing in our workshop. They can also be installed in real process conditions to reproduce normal operating conditions.
I
.
Test Plant
machines that will meet their expectations.
Our test center is made up of the latest machinery in the powder handling sector. Specialist engineers are there to advise you on the industrial processes the best suited to your requirements and to guide you at every stage of the decision to design the most efficient installation.
Laboratory for Powders
I
Citric acid
Clay
Ammonium nitrate
Sodium nitrate
Lampblack
Salt
Sugar
Talc
Urea
SludgeI 3
Analysis of machine test data and samples
Collaborate on the optimal solution for
your requirements
Submit a quotation
Discussion on results after the test with
machines (phase diagram, degradation
tests, fines content)
Step 2 - During Test Step 3 - After Test Step1 - Before Test
Select the likely optimal machine confi-
guration based on your technical requi-
rements (powders, flow rate, dosing)
Draft test proposal by our sales-engineers
representatives
F An individual consultation with and on-going support by our R&D engineers
F Confirmation of the appropriate machines to conduct a test with your product
F Tests at various operating conditions to define the most efficient process
according to your industrial requirements
F
F
products
F
F
F
I
300 process configurations 2,400 sq. feet of surface dedicated to the test35 industrial machines35 feet of ceiling Test with all types of products
2 support engineers ATEX configurations
+ than 300 configurations 300300 fi
I Come with your materials
I
machines
I
40
AVAILABLE
CUSTOM
MADE
Test
Pla
nt
Our expertise:FILLING SOLUTIONS FOR BIG BAG AND OCTABINTo fill
EMPTYING SOLUTIONS FOR BIG BAG AND OCTABINTo empty, compact and massage
SACK, DRUM AND CARDBOARD FILLING SOLUTIONSTo fill, package, handle
SACK AND DRUM EMTYING SOLUTIONSTo empty, compact, handle, discharge
SOLUTIONS FOR PNEUMATIC CONVEYINGVacuum, pressure
SOLUTIONS FOR MECHANICAL CONVEYINGTo transfer with screw, belt conveyor, bucket elevator, aeromechanical or vibratory conveyor,truck loading spout
CRUMBLING AND GRINDING EQUIPMENTTo granulate, crumble, grind, pound, micronise, disagglomerate
SIFTING EQUIPMENTTo sift, segregate, sieve, protect
CONTAINERS AND STORAGE SOLUTIONSTo fill, charge, empty, contain
DOSING EQUIPMENTTo control, regulate, empty, extract
MIXING EQUIPMENTTo homogenise, incorporate, fluidify, stir, mix
FLOW AND CONNECTIONTo vibrate, fluidise, unclog, drain, facilitate extraction, control the descent,prevent stacks and vaults, connect
INDUSTRIAL DUST COLLECTING EQUIPMENTTo filter, clean, confine, secure
contact@palamatic.frSales Department: +33 (0)2 22 93 63 08
The know-how of our teams the energy of a group
Recommended