View
2
Download
0
Category
Preview:
Citation preview
32
Index
Advantages of external venetian blinds 4
Technical characteristics 4
Types and dimensions 5
Soltec S80 External Venetian Blinds 6-11
Soltec Z90 External Venetian Blinds 12-17
Soltec LUX External Venetian Blinds 18-23
Soltec RETRO Mirror Blinds 24-27
General information and contacts 28-29
page
54
Protection from adverse weather conditionsVenetian blinds offer great balance between protection from overheating and preventing thermal solar energy from entering the interior.
Regulation of daylightThe use of blinds ensures indirect and diffused light in the interior. By rotating the slats, we can efficiently regulate daylight and transparency in the room.
Adjustments to your needsSome types of our blinds ensure total black-out, protection from burglary and stability in windy conditions.
Advantages of external venetian blinds
Integration into the façade
Venetian blinds can be integrated into the façade. In this way thermal bridges are avoided.
Wide selection of coloursA variety of colours and slat shapes is available. All slat guide rails can be colour-coordinated to your requirements to any RAL chart shade.
Integrated mosquito netIt is possible to integrate a mosquito net into the system of external venetian blinds.
Manual or motor driveBlinds can be controlled manually (by means of a crank) or motor controlled.
Installation using cover panelsExternal venetian blinds can be mounted on external visible or subfaçade cover panels made from aluminium or galvanized steel.
Technical characteristics
Dimensions of blinds
Soltec LUXExternal Venetian Blinds
Soltec RETROMirror Blinds
Soltec S80External Venetian Blinds
Soltec Z90External Venetian Blinds
Types available
Dimensions S80 Z90 LUX RETRO W50
Max. width 4000 4000 2800 2500
Min. width 600 600 600 600
Max. height 3500 3500 3500 3500
Min. height 400 400 400 400
76
Trapezoidal S80 slats are attached to a textile ladder and lifting strap, which en-ablesthe slats to rotate around their axes, and also serve to raise and lower them.
Aluminium guide rails are 18/24 mm in dimensions and are padded with rubber to ensure virtually soundless movement.
Guide rails are mounted onto the window frame using spacers.
In case the blinds are not to be integrated into the façade, we recommend using a 1.5 mm aluminium powder coated cover panel to cover the folded blinds.
Maximum width of S80 blinds is 400 cm,maximum height of S80 blinds is 300 cm.
Soltec S80 External Venetian BlindsThe standard sun-shading solution for an excellent price.
BASIC SLATS80 Blinds
END SLATS80 Blinds
Drive
Motor driveMotor control is usually by using a switch or remote control. The following options are also possible, provided the manufacturer submits electrical design plans: • central control using a main switch and/or individual switches.• central control using a switch and/or
individually using a remote control• sensor-based control, such as wind/
sun/time/rain sensor • computer-based control ("smart home"
systems)
Manual drive (crank) Manual Soltec S80 blinds are operated using a crank. Trapezoidal S80 slats are attached to a textile ladder and lifting strap, which enable the slats to rotate around their axes, and also serve to raise and lower them.The crank is 15/1.5 mm in diameter, in stan-dard white or grey.
Integration into the façade
Blinds can be integrated into the façade, ensuring installation without thermal bridges.
Installation
Installation using cover panels
In case the blinds are not integrated into the façade, we recommend using a 1.5 mm aluminium powder coated cover panel to cover the folded blinds.
98
Širina
Višina
DIMENSIONS - 3D VIEWS80 Blinds
INSTALLATION USING COVER PANELS80 Blinds
TYPES OF COVER PANELSS80 Blinds
INTEGRATION INTO THE FAÇADES80 Blinds
10
10
Y
X
Y
X
10
10 X
Y
20
X
Y
20
A B C D
A
A
Višina
Višina
mas
ke
50,50
120
A
A
81
10
CROSS SECTIONS80 Blinds
BASIC SLAT CROSS SECTIONS80 Blinds
Table of Dimensions
Blinds height(mm)
Package height(mm)
Cover panel height(mm)
900 125 140
900–110 135 160
1101–1300 145 160
1301–1500 160 190
1501–1700 165 190
1701–1900 180 210
1901–2100 190 220
Blinds height(mm)
Package height(mm)
Cover panel height(mm)
2101–2300 195 220
2301–2500 205 220
2501–2700 215 240
2701–2900 225 240
2901–3100 235 260
3101–3300 245 260
3301–3500 255 270
Hei
ght
Width
Hei
ght
Cove
r Pan
el
Hei
ght
1110
Guide rails
350,50
33,50
17
50,50
17
33,50
15
2 x Ø 5
48
35
Ø 6,40
Ø 3,20
17,50
88
17,504835
22
18
Aluminium guide rails are 18/24 mm in dimensions and are padded with rubber to ensure better and silent movement of slats. Guide rails are mounted on the window frame using spacers.
BRACKETSS80 Blinds
CROSS SECTION OF GUIDE RAILS AND BRACKETSS80 Blinds
CROSS SECTION OF GUIDE RAIL PROFILES80 Blinds
48 50,50
min 110
5
80
48
3
58 R27
Viši
na ž
aluz
ije
Viši
na m
aske
Viši
na p
aket
a la
mel
min 110
5
80
48
3
58 R27
Viši
na ž
aluz
ije
Viši
na m
aske
Viši
na p
aket
a la
mel
58
80
48
3
5
R27
min 110
Viši
na ž
aluz
ije
Viši
na m
aske
Viši
na p
aket
a la
mel
min 110
80
5
48
3
Viši
na ž
aluz
ije
Viši
na m
aske
Viši
na p
aket
a la
mel
CROSS SECTION - FAÇADE INTEGRATION, MANUAL DRIVES80 Blinds
CROSS SECTION - COVER PANEL INSTALLATION, MANUAL DRIVES80 Blinds
CROSS SECTION - FAÇADE INTEGRATION, MOTOR DRIVES80 Blinds
CROSS SECTION - COVER PANEL INSTALLATION, MOTOR DRIVES80 Blinds
1312
Soltec Z90 External Venetian BlindsManaging daylight. Ensuring total blackout. Stable in windy conaditions.
Soltec Z90 External Venetian Blinds have special Z-shaped slats, 90 mm wide. Slats perfectly fit one on top another. They are attached to a lifting ladder using stainless stell clamps. They come with integrated rubber padding, which ensures excellent grip and the best dimming of all standard venetian blinds. Z90 slats rotate around their axes using a crank or motor drive. The lifting and lowering mechanism enables stability in windy conditions.
Side guide rails are made from extruded aluminium 18 x 22 mm or 18 x 24 mm in dimensions. Side guide rails are padded with rubber which allows for smooth and silent movement of slats.The Soltec Z90 venetian blinds have an exceptionally long life span, up to 15 to 20 years.
BASIC SLATZ90 Z90 Blinds
END SLATZ90 Z90 Blinds
Integration into the façade
Blinds can be integrated into the façade, ensuring installation without thermal bridges.
Motor control is usually by using a switch or remote control. The following options are also possible, provided the manufacturer submits electrical design plans: • central control using a main switch and/or individual switches.• central control using a switch and/or
individually using a remote control• sensor-based control, such as wind/
sun/time/rain sensor • computer-based control ("smart home"
systems)
Manual Soltec Z90 blinds are operated using a crank. Trapezoidal Z90 slats are attached to a textile ladder and lifting strap, which enable the slats to rotate around their axes, and also serve to raise and lower them.The crank is 15/1.5 mm in diameter, in stan-dard white or grey.
Installation using cover panels
In case the blinds are not integrated into the façade, we recommend using a 1.5 mm aluminium powder coated cover panel to cover the folded blinds.
Drive
Motor drive Manual drive (crank)
Installation
1514
DIMENSIONS - 3D VIEWZ90 Blinds
INSTALLATION USING COVER PANELZ90 Blinds
TYPES OF COVER PANELSZ90 Blinds
INTEGRATION INTO THE FAÇADEZ90 Blinds
Širina
Višina
X
Y
10
X
Y
20
X
Y
20
10
X10
Y
10
A B C DA
A
Višina
Višina
mas
ke
120
50,50
B
B
93
14
A
A
93
23
CROSS SECTIONZ90 Blinds
BASIC SLAT CROSS SECTIONZ90 Blinds
END SLAT CROSS SECTIONZ90 Blinds
FINISHING SLAT CROSS SECTIONZ90 Blinds
BASIC SLAT CROSS SECTIONZ90 Blinds
Cove
r Pan
el
Hei
ght
Hei
ght
Hei
ght
Width
1716
48 50,50
350,50
33,50
17
50,50
17
33,50
15
2 x Ø 5
48
35
Ø 6,40
Ø 3,20
17,50
88
17,504835
22
18
CROSS SECTION - COVER PANEL INSTALLATION, MANUAL DRIVEZ90 Blinds
CROSS SECTION - FAÇADE INTEGRATION, MOTOR DRIVEZ90 Blinds
Table of Dimensions
Blinds height(mm)
Package height(mm)
Cover panel height(mm)
1000 158 178
1100 164 184
1200 170 190
1300 176 196
1400 181 201
1500 187 207
1600 193 213
1700 199 219
1800 204 224
1900 210 230
2000 216 236
Blinds height(mm)
Package height(mm)
Cover panel height(mm)
2100 222 242
2200 227 247
2300 233 253
2400 239 259
2500 245 265
2600 250 270
2700 256 276
2800 262 282
2900 268 288
3000 273 293
Guide railsAluminium guide rails are 18/24 mm in dimensions and are padded with rubber to ensure better and silent movement of slats. Guide rails are mounted on the window frame using spacers.
BRACKETSZ90 Blinds
CROSS SECTION OF GUIDE RAILS AND BRACKETSZ90 Blinds
CROSS SECTION OF GUIDE RAIL PROFILEZ90 Blinds
1918
Soltec LUX Blinds protect from overheating, ensure optimal transparency and indirect daylight in the interior. LUX Blinds are stable in windy conditions, protect from burglary and allow total blackout.
Soltec LUX Blinds are multifunctional blinds with self-supporting slats without a lifting strap.
The lifting and slat rotation mechanism is integrated into the 85 x 40 mm aluminium guide rails. Profiled slats are 97 mm wide and padded with rubber on one side, which ensures a better fit. The 0.7 mm slat thickness guarantees strength and stability in cases of stronger gusts of wind or even burglaries.
The colour of slats comes in five standard RAL chart colours.
Soltec LUX External Venetian BlindsEffective protection from burglary. Total blackout.
SLATLUX Blinds
Integration into the façade
Blinds can be integrated into the façade, ensuring installation without thermal bridges.
Motor control is usually by using a switch or remote control. The following options are also possible, provided the manufacturer submits electrical design plans:
• central control using a switch and/or individually using a remote control
• sensor-based control, such as wind/sun/time/rain sensor
• computer-based control ("smart home" systems)
Installation using cover panels
In case the blinds are not integrated into the façade, we recommend using a 1.5 mm aluminium powder coated cover panel to cover the folded blinds.
Drive
Motor drive
Installation
2120
Širina
Višina
DIMENSIONS - 3D VIEWLUX Blinds
INSTALLATION USING COVER PANELLUX Blinds
TYPES OF COVER PANELSLUX Blinds
INTEGRATION INTO THE FAÇADELUX Blinds
X
Y
10
X10
Y
10
X
10
Y
20
X
Y
20
A B C D
A
A
BB
Višina
Višina
mas
kee
120
25
98
27
CROSS SECTIONLUX Blinds
SLAT CROSS SECTIONLUX Blinds
Table of Dimensions
Height (mm) Package height (mm)
600-1290 240
1300-1500 280
1510-1800 310
1810-2000 330
2010-2300 360
2310-2500 380
2510-2800 410
2810-3000 450
3010-3400 490
3410-3800 510
3810-4200 550
4210-4600 600
Hei
ght
Cove
r Pan
el
Hei
ght
Width
Hei
ght
Width
2322
100
40
32,50
10
2 x Ø 3
100
50
40
4 x Ø 3
50
1020
12,50 37
85
25
50
CROSS SECTION - MOTOR DRIVELUX Blinds
CROSS SECTION - COVER PANEL INSTALLATION, MOTOR DRIVELUX Blinds
CROSS SECTION - FAÇADE INTEGRATION, MOTOR DRIVELUX Blinds
15
130
H1
A
97
5
85
L1
97
15
A
H1
130
97
5
45
Guide rails
BRACKETSLUX Blinds
CROSS SECTION OF GUIDE RAILS AND BRACKETSLUX Blinds
CROSS SECTION OF GUIDE RAIL PROFILELUX Blinds
2524
Soltec RETRO Mirro Blinds use special "Daylight" retro-technology, which protects from the sun and utilizes daylight at the same time. By using Soltec RETRO Mirro Blinds we can control the direction of sun-light. The part of sunlight which overheats the interior is directed outside. As a result the interior is cooled naturally, saving us air-conditioning energy costs.
At the same time daylight is directed inside towards the ceiling, which illuminates the room. Using this principle, the room conserves natural daylight which is of utmost importance for the quality of life, as well as saving us on artificial lighting costs.By controlling the angle of Soltec RETRO Mirror Blinds we control the direction of sunlight, consequently preventing over-heating all the while optimally lighting the interior.
Soltec RETRO Mirror BlindsFor energy efficient building envelopes. For optimal lighting with natural daylight.
Motorni pogon Ročni pogon (vitel) V primeru, ko z žaluzijo upravljamo ročno z vitlom, tega montiramo na notranjo stran okna.
Pogon
Oblika lamel
Montaža
Motor control is usually by using a switch or remote control. The following options are also possible, provided the manufacturer submits electrical design plans: • central control using a switch and/or
individually using a remote control• computer-based control ("smart home"
systems)
Installation using cover panels
We recommend using a 1.5 mm aluminium powder coated cover panel to cover the folded blinds.
2726
Širina
Višina
DIMENSIONS - 3D VIEWRETRO Mirror Blinds
INSTALLATION USING COVER PANELRETRO Mirror Blinds
PREREZ LAMELEZrcalna žaluzija Retro
TYPES OF COVER PANELSRETRO Mirror Blinds
X
Y10
X
10
20
Y
X
Y10
10
A B CA
A
Višina
Višina
mas
kee
CROSS SECTIONRETRO Mirror Blinds
SLAT CROSS SECTION RETRO Mirror Blinds
A
A
7
54
Table of Dimensions
Blinds height(mm)
Package height(mm)
1000 150
1100 156
1200 162
1300 168
1400 174
1500 180
1600 186
1700 192
1800 198
Blinds height(mm)
Package height(mm)
1900 204
2000 210
2100 216
2200 222
2300 228
2400 234
2500 240
2600 246
2700 252
Blinds height(mm)
Package height(mm)
2800 258
2900 264
3000 270
3100 276
3200 282
3300 288
3400 294
3500 300
Hei
ght
Cove
r Pan
el
Hei
ght
Hei
ght
Width
2928
More light,more life.soltec
Products:sunbreakers, sliding and folding panels, all types of roller blinds and exterior horizontal constructions, exterior venetian blinds, mirror blinds.
Calculation of static, wind force, kinematic movements, factors of solar protection (g-value) and of daylight in the interior.
Comprehensive solutions: development, engineering, design, planning, production and installation.
for better living comfort!
Soltec™ is a trademark of innovative and durable sun protection systems.
It is the brand of Mipo Ltd., a company with a long-standing tradition of development and manufacturing. The company produces efficient, aesthetically appealing and technically perfected sun shading solutions. We turn ideas into original concepts, innovative products and new services. We focus on innovations which ensure energy efficiency, passive cooling and quality lighting.
Contacts
MIPO d.o.o.Obrtna ulica 98257 Dobova, Slovenia
Website: soltec.siE-mail: info@soltec.siTel. no.: +386 (0)7 45 22 126Tel. no.: +386 (0)40 36 55 69
Recommended