View
219
Download
5
Category
Preview:
DESCRIPTION
http://arabiancrane.com/images/Grove-Mobile-Cranes/Shuttlelift-Carrydeck/Shuttlelift-5560B-Product-Guide.pdf
Citation preview
Features
• CD5540F: 13,6 t (15 USt) capacity three-section boom with 12,5 m (41 ft) outreach
• CD5560B: 16,3 t (18 USt) capacity four-section boom with 16,6 m (54 ft 6 in) outreach
• 4,6 m (15 ft) offsettable swingaway extension
• 9072 kg (20,000 lb) deck carrying capacity
• Available with diesel or dual fuel engine
Shuttlelift CD5500 SeriesProduct Guide
Features
CabBoth models come equipped with a standard open air cab shell with overhead safety glass.
An optional enclosed cab with front, right and rear glass, a split (two-piece) hinged door with sliding glass. Front windshield wiper, heater and defroster fan is available.
OutriggersThe CD5540F is equipped with single-position oblique style outriggers. The CD5560B comes equipped with two-position beam/jack style outriggers.
Cummins engineThe Cummins QSB 3,3 L, Tier III, diesel comes standard in both models.
Horsepower rating: CD5540F: 63 kW (85 hp) at 2600 rpm.CD5560B: 73,8 kW (99 hp) at 2600 rpm.
BoomA 12,5 m (41 ft) main boom comes standard on the CD5540F. An optional fourth main boom section adds 3,4 m (11 ft) additional boom length.
The CD5560B comes standard with a 16,6 m (54 ft 6 in) main boom.
SteeringStandard steering modes on the 5540F is two-wheel, four-wheel, and crab steer with an option for electronic self-alignment.
Standard steering modes on the 5560B include two-wheel, four-wheel, crab steer and electronic self-alignment
Contents
Specifications 4
CD5540F dimensions 7
CD5540F three-section boom working range 8
CD5540F four-section boom working range 9
CD5540F three-section boom load chart 10
CD5540F four-section boom load chart 11
CD5560B dimensions 12
CD5560B range diagram 13
CD5560B load chart 14
Symbols glossary 15
4
Specifications
Load indicator (wireless LSI)
A simple effective and easy to use load indicating system used in conjunction with the anti-two block system to assist the operator in efficient operation of the unit within the limits of the load chart. The display panel displays the hook load and warns the operator when a preset load capacity is exceeded. The warning is by a flashing light on the display panel. In conjunction with the load display panel (receiver), there is a wireless transmitter and load sensing pin attached to the boom head that transmits the hook load to the display panel.
*Load moment indicator(hardwired LMI)
Digital display of boom angle, boom length, boom radius, capacity, and allows for operator input to set the limits based on load chart. Displays color coded light bar and audible alarm with function cutout if load exceeds entered parameters.
Swing
Ball bearing swing circle with 360° continuous rotation. Hydraulic driven worm gear and pinion.Maximum speed: CD5540F: 2.1 rpm CD5560B: 2.5 rpm
Hydraulic system
Four section gear pump providing a system pressure of 241,3 bars (3500 psi)Combined flow: 333,1 Lpm (88.0 gpm)CD5540F: Six-section valve bank mounted in dash with direct mechanical linkage for low effort lever control.CD5560B: Six-section valve bank chassis mounted; operated via dash mounted, pilot pressure hydraulic joysticks.Return line filter with full flow by-pass protection and service indicator.151,4 L (40 gal) hydraulic reservoir with sight level gauge and steel side plating to guard against side impact damage.
Superstructure
Boom
CD5540F: 5,6 m – 12,5 m (18 ft 6 in – 41 ft 0 in) three-section full power boom.Maximum tip height: 14,1 m (46 ft 3 in)CD5560B: 5,6 m – 16,6 m (18 ft 6 in – 54 ft 6 in) four-section full power boom.Maximum tip height: 19,0 m (62 ft 6 in)
*Optional boom
CD5540F: Manual fourth main boom fly sectionMaximum tip height: 17,0 m (56 ft 3 in)
*Boom extension
4,6 m (15 ft) offsettable swingaway extension
Boom nose
CD5540F: Two sheave non-pivoting boom noseCD5560B: Two sheave, -3-position (0°, + 40°, + 80°) pivoting boom nose for minimizing head space requirements. Lowers head height 0,4 m (15.9 in) when nose is pivoted fully forward.
Boom elevation
CD5540F: Single double acting hydraulic cylinder with integral holding valve.CD5560B: Two double acting hydraulic cylinders with integral holding valve.Elevation: 0° to 69° for the CD5540F 0° to 80° for the CD5560B
Anti-two block device
Standard anti-two block device, when activated, provides an audible warning to the crane operator and disengages all crane functions whose movement can cause two-blocking.
*Denotes optional equipment
Shuttlelift CD5500 Series 5
Specifications
Outrigger controls
CD5540F: Lever controls located on dash panel and operate the beams in pairs from side to side. Level bubble located inside operators compartment.CD5560B: Two switch operation mounted on dash panel. One three- position rocker switch to select all beams / jacks, left beams / jacks only, or right beams / jacks only. Separate four- way toggle switch to activate beams out / in and jacks down / up. Level bubble indicator located inside operators compartment.*Independent outrigger controls available as an option.
Standard engine (Tier III)
CD5540F: Cummins QSB 3,3 L turbo-charged diesel rated at 63,0 kW (85 bhp) at 2600 rpm.CD5560B: Cummins QSB 3,3 L turbo-charged diesel rated at 73,8 kW (99 bhp) at 2600 rpm.
*Optional engine (2007 EPA)
G.M. 4,3 L V-6 EFI dual fuel (gasoline / L.P.) rated at 69,3 kW (93 bhp) @ 2500 rpm.
Operators control station
Frame mounted, open air style control station with cab shell includes all crane functions, driving controls, and overhead safety glass. Other standard equipment include a durable weather resistant seat with seat belt, hourmeter, sight level bubble, and fire extinguisher. The dash panel includes engine oil pressure gauge, engine water temperature gauge, fuel gauge, transmission low oil and high temperature warning lights, low battery warning light, and brake system low pressure warning light. The LSI (load indicator) receiver is mounted to the top of the dash.
*Operators control station enclosed
Includes the standard cab shell with the addition of front, right, and rear glass, a split (two-piece) hinged door with sliding glass. Front windshield wiper, heater and defroster fan are included.
Superstructure (continued)
Hoist specifications
Piston motor drive with spring applied / hyd. released brake. Equal speed power up and down.Drum diameter: 0,25m (9.75 in)Maximum hoist single line pull: 5443 kg (12,000 lb)Maximum hoist single line speed: CD5540F: 38,4 m/min (126 fpm) CD5560B: 48,2 m/min (158 fpm)Maximum permissible single line pull: CD5540F: 3402 kg (7500 lb) (12,7 mm [1/2 in]) CD5560B: 4082 kg (9000 lb) (12,7 mm [1/2 in]) Rope length:CD5540F: (three-section boom) 73,0 m (240 ft)(four-section boom) 88,4 m (290 ft)CD5560B: 94,5 m (310 ft)
Carrier
Frame
High strength alloy steel constructed with integral outrigger housings; front and rear tie-down lugs. 75 ft2 carrydeck size with 9072 kg (20,000 lb) carrying capacity. Deck coated with anti-skid treatment.
Outriggers
CD5540F: Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size 222 mm x 254 mm (8.75 in x 10 in).Maximum pad load: 162 p.s.i.CD5560B: Two-stage hydraulic telescoping beam with oblique type jack on all four corners, provides extended and down and retracted and down lifting capacities. Integral holding valves on both beam and jack. Outrigger pad size 222 mm x 254 mm (8.75 in x 10 in).Maximum pad load: 389 p.s.i.
*Denotes optional equipment
6
Specifications
Suspension
Front: Rigid mounted to frame.Rear: Provides 1.5° oscillation for use on semi-rough terrain. Axle lock-out must be engaged (locked) whenever picking on rubber or traveling in the crab steer mode. A warning light indicates when the axle lock-outs are engaged.
Lights
Recessed mounted, includes head, tail, rear work, stop, and turn signals.
Maximum speed
CD5540F: 23,3 km/h (14.5 mph)CD5560B: 33,8 km/h (21.0 mph)
Gradeability (theoretical)
CD5540F: 73%....no load 41%.... 9072 kg (20,000 lb) load
CD5560B: 68%....no load 40%.... 9072 kg (20,000 lb) load
Gross vehicle weight (G.V.W)
CD5540F: 12 742 kg (28,090 lb) three-section boom12 966 kg (28,584 lb) four-section boom
CD5560B: 14 769 kg (32,560 lb)
Miscellaneous standard equipment
Two sheave, “Quick Reeve” style hookblock; CD5540F: 13,6 t (15.0 USt); CD5560B: 16,3 t (18.0 USt).Back-up alarmLifting and tie down lugsOutrigger motion alarm
Carrier (continued)
Fuel tank capacity
151,4 L (40 gal) all steel construction with steel side plate to guard against side impact.
Electrical system
One 12V maintenance free battery, 820CCA @ 0°. 63 amp alternator.
Drive
4 x 2 – Front axle drive with planetary hubs and limited slip differential.
Steer
CD5540F: Two-wheel, four-wheel, and crab steerCD5560B: Two-wheel, four-wheel, and crab steer with electric self alignment.
Outside turning radius:CD5540F/CD5560B: Two wheel steer: 6,55 m (21 ft 6 in) Four wheel steer: 3,76 m (12 ft 4 in)
Transmission
CD5540F: I.T.L. synchromesh four-speeds forward and reverse.CD5560B: I.T.L. powershift four-speeds forward and reverse. Stalk mounted shifter on left side of steering column.
Tires
385/65R 22.5 radial traction tread pneumatic.
Brakes
Hydraulic actuated internal wet-disc service brakes acting on all four wheels. A dash mounted toggle switch activates the dry disc parking brake on the transmission output yoke with a dash warning light.
*Denotes optional equipment
Shuttlelift CD5500 Series 7
Dimensions
CD5540F4,58 m
(15' 0.50")
2,16 m(7' 1")
1,83 m(6' 0")
1,06 m(3' 6")
0,74 m(2' 5")
2,43 m (7' 1 1-1/2")
1,22 m(4' 0")
2,01 m(6' 7")
4,06 m (13' 2-1/2'')
6,73 m(22' 1'')
50,8 cm(1' 8")
4,29 m(14' 1')
Three Section Boom
1,32 m(4' 4")
2,03 mm(8")
0,08 m(3")
2,44 m w/ Enclosed Cab(8' 0" )
3,73 m(12' 3")
1,88 m(6' 2")
1,99 m(6' 6-1/2")
1,24 m(4' 1")
38,1 cm(1' 3")
33,0 cm(1' 1")
Four Section Boom 5,65 m Retracted
(18' 6'')
15,93 m Extended(52' 3")
5,65 m Retracted(18' 6'')
12,50 m Extended(41' 0'')
2,43 m (7' 1 1-1/2")
4,58 m(15' 0.50")
2,16 m(7' 1")
1,83 m(6' 0")
1,06 m(3' 6")
0,74 m(2' 5")
2,43 m (7' 1 1-1/2")
1,22 m(4' 0")
2,01 m(6' 7")
4,06 m (13' 2-1/2'')
6,73 m(22' 1'')
50,8 cm(1' 8")
4,29 m(14' 1')
Three Section Boom
1,32 m(4' 4")
2,03 mm(8")
0,08 m(3")
2,44 m w/ Enclosed Cab(8' 0" )
3,73 m(12' 3")
1,88 m(6' 2")
1,99 m(6' 6-1/2")
1,24 m(4' 1")
38,1 cm(1' 3")
33,0 cm(1' 1")
Four Section Boom 5,65 m Retracted
(18' 6'')
15,93 m Extended(52' 3")
5,65 m Retracted(18' 6'')
12,50 m Extended(41' 0'')
2,43 m (7' 1 1-1/2")
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
8
Range diagram
CD5540F(Three-section boom)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Hei
ght f
rom
the
grou
nd in
feet
128 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 5446 4 2 0 2 6
52
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
44
36
38
40
42
48
46
50
60
56
54
58
6246 4 2 0 2 1286 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 54
0
52
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
44
36
38
40
42
48
46
50
60
56
54
58
62
69°
60°
50°
40°
30°
20°
10°
0°
Operating radius in feet from axis of rotation
Shuttlelift CD5500 Series 9
Range diagram
CD5540F(Four-section boom)
52
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
44
36
38
40
42
48
46
50
60
56
54
58
62
64
66
68
70
72
128 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 54 56 58 60 62 64 660
46 4 2 0 2 6
46 4 2 0 2 1286 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 54 56 58 60 62 64 66
52
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
44
36
38
40
42
48
46
50
60
56
54
58
62
64
66
68
70
72
0o
10o
20o
30o
40o
50o
60o
69o
RETRACTEDW/4TH RET
RETRACTEDW/4TH EXT
EXTENDEDW/4TH RET
EXTENDEDW/4TH EXT
15'JIB
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION
HEI
GH
T FR
OM
TH
E G
ROU
ND
IN F
EET
YB5515 (4-SECTION BOOM)
Operating radus in feet from axis of rotation
Hei
ght f
rom
the
grou
nd in
feet
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
10
Load chart
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.
1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of verticalhoist line or tackle with load applied.
2) The rated loads shown on outriggersdo not exceed 85% of actual tipping. Therated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors a�ecting stability. Hazardous suroundings, climatic conditions, experience of operator andproper training must be taken into account by the operator.
3) The weights of all load handling devices, such as hooks, hook blocks,slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart.
4) Ratings on outriggers are withoutriggers fully extended.
5) Ratings on rubber depend on tire capacity, , condition of tires and proper inflation pressure (120 psi). Loads on rubber may be transportedat a maximum speed of 2.5 mph on a smooth, hard, level surface with theboom retracted to the shortest lengthpossible and centered over the front.
6) For operating radius not shown,use load rating of next larger radius.
7) The maximum combined total boom and deck load is 16,000 lb. The maximum deck load only is 20,000 lb.
8) Do not induce any external side loads to boom or jib.
CD5540F (3-SECTION BOOM)
1302442
ON OUTRIGGERS (lb)
MA
IN B
OO
MJIB
ON RUBBER (lb)
14,800
RADIUS(ft)
13,00012,20010,800
96308640
14,80013,00012,20010,800
9180
4290
32603060
35803920
53104740
62107480
34803310
29602710
24102210
27002560
2860
5060
40204510
704064205700
7790
3700
72106600
60005250
640570
740690
3190
1320
930860800
1 16 01040
18201530
22002660
47603900
1040930
4370
1990
1460
12701370
17901610
26202260
30703710
60605120
3130
F/R 360° F/R 360°
30,00026,20022,30018,600
30,00026,20022,30018,600
17,00013,500
17,00014,60010,880
810010,700
871014.015.016.018.020.022.024.026.028.030.032.034.036.037.540.042.044.046.048.8
6.08.0
10.012.0
2390 1940 48079052.5
BOOM
(deg)ANGLE
MAIN
60
40
15
0
3035
4550
2250
1950
-
21502080
3150
26002400
JIB STRUCTURAL
55 2850
25 205020 2000
5 -10 -
69 390065 3500
2800
2100
2000
26002400
4300
34003050
3800
23002200
20202050
60005000
1950
-
-
19001850
2350
21002000
2200
--
--
28002550
15°0° 30°
CAPACITIES (lb)
11901120
0 - 30,000 lb4-PART
0 - 7500 lb1- PART
RIGGING CHART
WIRE ROPE: 1/2 in diameter
Minimum breaking strength 26,250 lb
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
210 lb
100 lb
0 lb
700 lb
N/A
100 lb
N/A
0 lb
FRONT REAR
SIDE
SIDE
15°
30°
15°
30°
CD5540F(Three-section boom)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Shuttlelift CD5500 Series 11
Load chart
1) The rated loads are the maximumlifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtainoperating radius. The operating radius is the horizontal distance from a projection of the axis ofrotation to the supporting surface,before loading, to the center ofvertical hoist line or tackle withload applied.
2) The rated loads shown on outriggers do not exceed 85% ofactual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniformsupporting surface. Practicalworking loads depend on supporting surface, operating radiusand other factors a�ecting stability .Hazardous suroundings, climatic conditions, experience of operatorand proper training must be takeninto account by the operator.
3) The weights of all load handlingdevices, such as hooks, hookblocks, slings, etc., except the hoistrope, shall be considered as partof the load. See reduction chart.
4) Ratings on outriggers are withoutriggers fully extended.
5) Ratings on rubber depend on tirecapacity , condition of tires andproper inflation pressure (120 psi).Loads on rubber may be transported at a maximum speedof 2.5 mph on a smooth, hard, levelsurface with the boom retracted tothe shortest length possible and centered over the front.
6) For operating radius not shown, useload rating of next larger radius.
7) The maximum combined totalboom and deck load is 16,000 lb.The maximum deck load only is 20,000 lb.
8) Do not induce any external sideloads to boom or jib.
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.
1302395
0 - 30,000 lb4-PART
0 - 7500 lb1-PART
RIGGING CHART
WIRE ROPE: 1/2 inch diameter
Min. breaking strength 26,250 lb
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
210 lb
100 lb
0 lb
700 lb
N/A
100 lb
N/A
0 lb
FRONT REAR
SIDE
SIDE
15o
30o
15o
30o
ON RUBBER (lb)ON OUTRIGGERS (lb)
MAI
N B
OO
MJIB
14,80014.0
RADIUS(ft)
15.0 13,00016.0 12,20018.0 10,80020.0 963022.0 864024.026.028.030.032.034.036.037.540.042.044.046.048.8
58.052.5
14,80013,00012,20010,600
8630
4420
31902890
35703950
57005040
64607350
29502760
243022402030
- -
209018501480
24302250
2600
4400
35103930
680058205020
7790
3210
72106600
54804890
-
450380290
550500
3080
1220
770680610
1070920
16101410
19902460
45003750
-
800680500
970890
3980
1880
1280
1070
16501460
23602100
27203230
60604950
2590
F/R 360° F/R 360°
63.8 - - --
ON RUBBER (lb)ON OUTRIGGERS (lb)
8290
RADIUS(ft)
82008110795078207710
83908200
79507820
4760
31902970
35704080
63305420
72707710
34003150
2630232020701720 1380
213019301710
24902300
2700
5180
42504680
710065905710
7630
3830
77607150
75006080
170
470370280
630540
3560
1580
990880740
1360
21501840
25203000
55104500
420
790710590
960870
4730
2190
1370
10701240
18801600
29402550
34103980
66105680
2890
F/R 360° F/R 360°
1330 1020 60230
4TH EXTENDED
30,0006.08.0 26,200
10.0 22,30012.0 18,600
30,00026,20022,30018,600
17,00013,500
17,00014,60011,0007650
10,7008710
-11,00010,7009250
-
10,7009250
- -
10,7009250
10,7009250
14.015.016.018.020.022.024.026.028.030.032.034.036.037.540.042.044.046.048.852.558.063.8
6.08.0
10.012.0
4TH RETRACTEDBOOM
(deg)ANGLE
MAIN
4TH RETRACTED
60
40
15
0
3035
4550
2250
1950
-
21502080
3150
26002400
JIB STRUCTURAL CAPACITIES (lb)
55 2850
25 205020 2000
5 -10 -
69 390065 3500
4TH EXTENDED
2800
2100
2000
26002400
4300
34003050
3800
23002200
20202050
60005000
1950
-
-
19001850
2350
21002000
2200
--
--
28002550
15°0° 30° 0° 15° 30°
2250
1950
-
21502080
3150
26002400
2850
20502000
--
39003500
2800
2100
2000
26002400
4300
34003050
3800
23002200
20202050
51804970
1950
-
-
19001850
2350
21002000
2200
--
--
2800255011,000 11,000 11,000
8110
1180
1160
CD5540F 4 sect
CD5540F(Four-section boom)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
12
Dimensions
CD5560B
2,41 m(7' 1 1")
1,89 m(6' 2.25") 1,17 m
(3' 10")
0,36 m(14.25")
1,98 m(6' 6")
2,38 m(7' 9.5")
4,22 m(13' 10")
1,24 m(4' .75")
0,75 m(2' 5.5")
1,17 m(3' 10.75 ")
2,03 m(6' 8")
0,42 m(1' 4.5")
1,07 m(3' 6")
4,78 m(15' 8")
SEEINSET
0,51 m(1' 8")
1,19 m(3' 1 1")2,42 m
(7' 1 1.25")2,00 m
(6' 6.75")2,17 m
(7' 1.25")4,30 m
(14' 1.25")6,91 m(22' 8")
0,34 m(13.25")
Retracted 5,64 m (18' 6") and Extended 16,61 m (54' 6")
1,83 m(6' 0")
2,13 m(7' 0")
1,68 m(65.97") 0o
1,61 m(63.39") 40o
1,27 m(50.00")
80o
YB5518 Dimensions
Dimensions are with the boom horizontaland the anti-two block bottomed.
2,41 m(7' 1 1")
1,89 m(6' 2.25") 1,17 m
(3' 10")
0,36 m(14.25")
1,98 m(6' 6")
2,38 m(7' 9.5")
4,22 m(13' 10")
1,24 m(4' .75")
0,75 m(2' 5.5")
1,17 m(3' 10.75 ")
2,03 m(6' 8")
0,42 m(1' 4.5")
1,07 m(3' 6")
4,78 m(15' 8")
SEEINSET
0,51 m(1' 8")
1,19 m(3' 1 1")2,42 m
(7' 1 1.25")2,00 m
(6' 6.75")2,17 m
(7' 1.25")4,30 m
(14' 1.25")6,91 m(22' 8")
0,34 m(13.25")
Retracted 5,64 m (18' 6") and Extended 16,61 m (54' 6")
1,83 m(6' 0")
2,13 m(7' 0")
1,68 m(65.97") 0o
1,61 m(63.39") 40o
1,27 m(50.00")
80o
YB5518 Dimensions
Dimensions are with the boom horizontaland the anti-two block bottomed.
2,41 m(7' 1 1")
1,89 m(6' 2.25") 1,17 m
(3' 10")
0,36 m(14.25")
1,98 m(6' 6")
2,38 m(7' 9.5")
4,22 m(13' 10")
1,24 m(4' .75")
0,75 m(2' 5.5")
1,17 m(3' 10.75 ")
2,03 m(6' 8")
0,42 m(1' 4.5")
1,07 m(3' 6")
4,78 m(15' 8")
SEEINSET
0,51 m(1' 8")
1,19 m(3' 1 1")2,42 m
(7' 1 1.25")2,00 m
(6' 6.75")2,17 m
(7' 1.25")4,30 m
(14' 1.25")6,91 m(22' 8")
0,34 m(13.25")
Retracted 5,64 m (18' 6") and Extended 16,61 m (54' 6")
1,83 m(6' 0")
2,13 m(7' 0")
1,68 m(65.97") 0o
1,61 m(63.39") 40o
1,27 m(50.00")
80o
YB5518 Dimensions
Dimensions are with the boom horizontaland the anti-two block bottomed.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Shuttlelift CD5500 Series 13
Range diagram
CD5560B
Operating radius in feet from axis of rotation
Hei
ght f
rom
the
grou
nd in
feet
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
787674727068666462605856545250485644424038363432302826242220181614121086420
787674727068666462605856545250485644424038363432302826242220181614121086420
8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68
8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68
18.5
' BO
OM
30.5
' BO
OM
42.5
' BO
OM
54.5
' BO
OM
69.5
' WIT
H 15
' JIB
0°
5°
10°
15°
20°
25°
30°
35°
40°
45°50°
75°70°
65°60°
55°
80°
CD5560B LOAD RATING and RANGE DIAGRAM
MAIN BOOM LOAD RATINGS ON OUTIGGERSExtended and Down 360˚ or Retracted and Down Front/Rear18.5 ft BOOM 30.5 ft BOOM 42.5 ft BOOM 54.5 ft BOOM
Radius(ft)
BoomAngle(deg)
RatedLoad(lb)
BoomAngle(deg)
RatedLoad(lb)
BoomAngle(deg)
RatedLoad(lb)
BoomAngle(deg)
RatedLoad(lb)
68
101214
15.0161820222426
27.0283032343638
39.04042444648
51.0
64574939250--------------------
36,00031,50024,00019,50016,20015,000
--------------------
7571676358565348433729180-------------
24,50024,50024,00020,00016,80015,50014,40012,50011,0009800870078007400
-------------
7977747168666562495552486
4440363024150------
23,70023,00021,50019,70017,00015,80014,60012,70011,20010,0009000810077007300650057005100450040003900
------
-8077757372716966646159585654514845424139353127210
-17,40015,80014,00012,60012,00011,40010,500960089008300770075007200670060005400480043004000380034003100290027002400
MAIN BOOM LOAD RATINGS ON OUTRIGGERSRetracted and Down 360˚
18.5 ft BOOM 30.5 ft BOOM 42.5 ft BOOM 54.5 ft BOOM
Radius(ft)
BoomAngle(deg)
RatedLoad(lb)
BoomAngle(deg)
RatedLoad(lbs
BoomAngle(deg)
RatedLoad(lb)
BoomAngle(deg)
RatedLoad(lb)
68
101214
15.0161820222426
27.0283032343638
39.04042444648
51.0
64574939250--------------------
36,00029,00016,00011,40089008000
--------------------
7571676358565348433729180-------------
24,50024,50020,60012,900990089008100680059005000410036003400
-------------
7977747168666562495552486
4440363024150------
23,70023,00020,00012,80010,200930085007200620052004500380036003300290025002200190017001600
------
-8077757372716966646159585654514845424139353127210
-17,40015,80013,00010,600950085007200610053004500390036003300280025002200200018001700160014001200
900700
The rated loads are the maximum lift capacities as determinedby operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection ofthe axis of rotation to the supporting surface, before loading,to the center of vertical hoist line or tackle with load applied.
The rated loads shown on otriggers do not exceed 85% ofactual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. Retracted outrigger rated loads meet ASME B30.5-2004. These ratings are based on freelyuniform supporting surface. Practical working loads depend onstability. Hazardous surroundings, climatic conditions, experienceaccount by the operator.
The weights of all load handling devices, such as hooks,hook blocks, slings, etc, except the hoist rope, shall beconsidered as part of the load. See above.
Ratings on outriggers are for either outriggers fully extendedand down or fully retracted and down. Ratings for outriggersfully retracted and down will apply for any intermediateoutrigger setting.
Ratings on rubber depend on tire capacity, condition of tiresand proper inflation pressure (120 psi). Loads on rubber maybe transported at a maximum speed of 2.5 mph on a smoothhard level surface with boom retracted to the shortest lengthpossible and centered over front. Do not use jib with craneon rubber.
For operating radius not shown, use load rating of next largerradius.
The maximum combined total boom and deck load is 16,000lb the maximum deck load only is 20,000 lb.
Do not induce any external side loads to boom or jib.
1)
2)
3)
4)
5)
6)
7)
8)
80016675
Radius(ft)
MAIN BOOMON RUBBER
Any Boom LengthFront
Rating(lb)
360˚Rating
(lb)68
101214
15.0161820222426
27.0283032343638
39.04042444648
51.0
16,00013,00011,00091007800710065005600480042003600315029502800245021001900175015251450135011501050950850700
10,90087007400640056005300490042003500300025002200205019001650140012001000850775725625525425300200
Jib O�set Angle15° 30°
To 42.5 ftMainBoom
To 54.5 ftMainBoom
AnyBoom
Length
20151050
16001500146014501440
50004400390035003150285026002400225021502080205020001950
---
50004400390035003150285026002400225020501850172015901520
---
35003100280025502350220021002000195019001830
------
15 FT JIB CAPACITIES ON EXTENDED OUTRIGGERSMainBoomAngle(deg)
0°To 42.5 ft
MainBoom
To 54.5 ftMainBoom
807570656055504540353025
---
460038003300290026002400215019301750
NOTES:JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART.
SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY.
1000
RATING REDUCTIONS FOR LOADHANDLING DEVICES INSTALLED (lb)
MAIN BLOCK
HOOK & BALLJIB STOWED
JIB DEPLOYED
FROM MAIN BOOM
230
100NO REDUCTION
700
FROM JIB
NOT APPLICABLE
100 NOT APPLICABLE
NO REDUCTION
15˚30˚
SIDE
FRONT REAR
15˚30˚
SIDE
MAXIMUM PERMISSIBLE SINGLE LINE PULL = 9000 LB
WIRE ROPE: 13 mm Diameter 8 X 25 GalvanizedMinimum required breaking strength = 37,200 lb
22002100205020202000
-75006100500043003800340030502800260024002300
14
Load chart
CD5560B
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Shuttlelift CD5500 Series 15
Symbols glossary
Drive
RotationElectrical system
Suspension
Fuel tank capacity
Tires
Engine
Brakes
Outrigger controls
Axles Outriggers
Transmission
Frame
Steering
Lights
Boom elevation
Cab
Swing
Hydraulic system
Hoist
Boom nose
Radius
Boom extension
Boom length
Grade
Gear
Boom
Counterweight
Speed
Oil
Extension
HookblockH
Heavy duty jib
©2011 ManitowocForm No.CD5500 Series PGPart No. 07-009-2M-0210 www.manitowoc.com
This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.
Regional offices
ChinaShanghai, China Tel: +86 21 6457 0066Fax: +86 21 6457 4955
Greater Asia-Pacific Singapore Tel: +65 6264 1188 Fax: +65 6862 4040
Europe, Middle East, Africa Ecully, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00
Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277
Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062
Regional headquarters
Manitowoc Cranes
ChinaBeijingChengduGuangzhouXian
Greater Asia-PacificAustraliaAdelaideBrisbaneMelbourneSydneyIndiaCalcuttaChennaiDelhiHyderabadPuneKoreaSeoulPhilippinesMakati CitySingapore
FactoriesBrazilAlphavilleChinaTaiAnZhangjiagangFranceCharlieuMoulinsGermanyWilhelmshavenIndiaPuneItalyNiella TanaroPortugalBaltarFânzeresSlovakiaSarisUSAManitowoc Port WashingtonShady Grove
AmericasBrazilAlphavilleMexicoMonterreyChileSantiago
Europe, Middle East, AfricaCzech RepublicNetvoriceFranceBaudemontCergyDecinesGermanyLangenfeldHungaryBudapestItalyLainateNetherlandsBredaPolandWarsawPortugalBaltarRussiaMoscowU.A.E.DubaiU.K.Buckingham
Recommended