View
523
Download
0
Category
Preview:
Citation preview
Scilab 5.2.2 and SIVP Installation Guide
1
1- Obtain and open the folder Scilab_Installation
2- Open the folder VS2010Express
Scilab 5.2.2 and SIVP Installation Guide
2
3- You should find the following folders:
4- Click on Setup, you will get the following screen
Scilab 5.2.2 and SIVP Installation Guide
3
5- Install Visual C# 2010 Express
6- Click on Next and select the correct option as illustrated in the picture
Scilab 5.2.2 and SIVP Installation Guide
4
7- Click Next and select the correct option as illustrated in the picture
8- Click Next and check the location
Scilab 5.2.2 and SIVP Installation Guide
5
9- Click Install to install all the items
10- When Setup complete you will see the following screen click exit to exit
Scilab 5.2.2 and SIVP Installation Guide
6
11- In the same way install Visual Basic 2010 Express, Visual C++ 2010 Express, and Visual Web
Developer 2010 Express
12- From the Scilab_Installation folder click on scilab-5.2.2 Setup file
Scilab 5.2.2 and SIVP Installation Guide
7
13- You should get the following screen, Click on Run
14- You should get the following screen, click OK
Scilab 5.2.2 and SIVP Installation Guide
8
15- You should get the following screen, Click next
16- You should get the following screen, chose accept and click on Next
Scilab 5.2.2 and SIVP Installation Guide
9
17- You should get the following screen, check the installation folder and Click Next
18- You should get the following screen, chose the Atlas Library for SciLab option, but leave all other
options the same, then click Next
Scilab 5.2.2 and SIVP Installation Guide
10
19- You should get the following screen to create a short cut, Click Next
20- Check all the boxes as shown, then click next
Scilab 5.2.2 and SIVP Installation Guide
11
21- When you see the following screen, click install
22- After the installation completes, you should get the following screen, click Finish
Scilab 5.2.2 and SIVP Installation Guide
12
23- SciLab will be launched and you should get the following screen
24- Now you need to install the Toolboxe SIVP-0.5.3 with SciLab as indicated in the arrows in the
folder Scilab_Installation
Scilab 5.2.2 and SIVP Installation Guide
13
25- Goto to the folder where scilab software has been installed e.g. C:\Program Files\scilab-5.2.2
then click on contrib folder
26- Copy the SIVP_0.5.3 folder from the Scilab_installetion folder
Scilab 5.2.2 and SIVP Installation Guide
14
27- Paste the SIVP_0.5.3 folder into the contrib folder
28- Now click on the contrib folder, you should have the following screen
Scilab 5.2.2 and SIVP Installation Guide
15
29- Click on SIVP_0.5.3 folder
30- You should get the following screen, close the scilab program if it is open then click on the
loader file
Scilab 5.2.2 and SIVP Installation Guide
16
31- The following screen should come up
32- Goto the menu Toolboxes and execute the submenue SIVP_0.5.3
Scilab 5.2.2 and SIVP Installation Guide
17
33- You should get the following screen indicating the SIVP has been loaded, now scilab is ready to
be used
Recommended