SB-442 GENERAL STAIN REMOVER - Ohio's Premier Concrete...

USESPavers, concrete and retaining walls. Can also be used onmanufactured and natural stone, tile, terrazzo and stuccoon both horizontal and vertical applications.

RELATED PRODUCTSSB-488 Efflorescence & Rust RemoverSB-1300 Joint Stabilizing SealerSB-4000 Water Repelling Invisible SealerSB-5000 Stainblocking Invisible SealerSB-7000 Gloss Finish Joint Stabilizing SealerSB-10 Paver Bond®

PRODUCT DESCRIPTIONSB-442 General Stain Remover is a concentrated non-aciddegreaser and general purpose cleaner for use on pavers,concrete and retaining walls. This technologically advancedcleaner removes motor oil, food an beverage stains. It isenvironmentally friendly and replaces several types of harshacid cleaners. SB-442 General Stain Remover’s uniqueClean Rinse Technology lifting power allows residue to bequickly and easily rinsed away with a high or low pressurewater sprayer. SB-442 General Stain Remover’s chemicalblend draws out stains from within the surface but does notetch or damage concrete, anodized aluminum or paintedsurfaces. The product can be used to clean and maintainSurebond sealed pavements as it is compatible with allother Surebond products. It is suitable for both horizontaland vertical surfaces. Phosphate free.

PREPARATIONTo determine the suitability of this product for a specificsurface, test on a small, inconspicuous area first. Inspectarea for visible staining to determine stain types andquantity. Sweep and remove all soil and other debris fromthe surface.

SB-442GENERAL STAIN REMOVER

TECHNICAL DATA SHEET

TOLL FREE: 800-932-3343 www.surebond.com

APPLICATIONINFORMATIONPre-treat and saturatestained area while dryto increase degreasereffectiveness and toensure penetrationinto the texturedsurface. With theexception of the 16oz. spray bottles, add8 to 16 ounces of con-centrate for eachgallon of water used,depending on theseverity of the stain.Apply using a gardensprayer, low pressuresiphon or bulksprayer.Allow cleaner to soak into the surface for 5 to 10 minutes.Improve results by scrubbing surface with a natural fiberbrush to agitate and break down stains. Use a highpressure, hot water wash to draw out and further breakdown surface stains. Rinse surface thoroughly. It may benecessary to use stronger concentrations and secondarycleanings to remove heavier, deep set stains.

MAINTENANCEPavement and wall maintenance should be carried out perinstructions on appropriate sealer data sheet. Surebondcleaners are compatible with all Surebond sealers.

PACKAGING /SIZES12 x 16 oz. ready to use spray bottles per case4 x 1 gallon containers per case5 gallon pails55 gallon drumsBulk packaging available

COVERAGE**Per gallon. Coverage based on single treatment. Some applications may

require additional treatments. Actual coverage may vary depending on thetype, age, condition and porosity of the surface, application method andother local conditions.

STORAGEStore in a cool place and protect from freezing.

SHELF LIFETwo years when properly stored.

MATERIAL SQ FEET SQ METER

All Surfaces 400 - 800 37.2 - 74.4

FeaturesWhat makes SB-442 General Stain Remover different?

Powerful

Safe

Environmentally friendly

Clean Rinse Technology

Compatible

Versatile

Benefits

• Cleans oil, dirt and grease

• Does not damage or etchsurfaces and building materials

• Biodegradable and replacesharsh, acid-based cleaners

• Does not leave cleaner residueon the surface

• Works with all Surebond sealers

• Works on both horizontal andvertical surfaces

SB-442 Technical Data Sheet_Layout 1 3/3/11 3:09 PM Page 1

SB-442GENERAL STAIN REMOVER

TECHNICAL DATA SHEET

Manufactured by Surebond, Inc. Copyright 2008. All trademarks are the property of Surebond, Inc. www.surebond.com

PRECAUTIONARY INFORMATIONEye and skin irritant. Contains Alkaline Silicates, Surfactantsand Glycol Ether Solvents. Do not get in eyes, on skin orclothing. Harmful if swallowed. Do not take internally.

FIRST AID: For eyes, flush immediately with plenty of waterfor at least 15 minutes and get medical attention. For skin,wash thoroughly with water. If irritation persists, see adoctor. If swallowed, drink large quantities of water or milk.Get medical attention immediately. Keep out of reach ofchildren (see Material Safety Data Sheet).

LIMITATIONSAvoid contact with glass. If this product is allowed to dry onglass a residue may be created which is not removable. Ifaccidentally splashed on glass, flush immediately withwater. Do not expose containers to freezing temperaturesand store inside during cold weather. Test cleaning is alwaysrecommended to ensure both the proper physical andaesthetic properties prior to starting a project.

WARRANTYManufacturer warrants its products conform to the publishedspecifications. No other warranties are expressed orimplied, including those of merchantability or fitness or anypurpose not expressly set forth herein. The user mustdetermine suitability of the products for their particular use.Manufacturer and any seller’s liability for incidental orconsequential damage hereunder shall not exceed thepurchase price of the product used.

ASSISTANCE & ADDITIONAL INFORMATIONFor sales, specification assistance, technical questions,detailing, etc., please contact:

3925 Stern Ave. I St. Charles, IL 60174Email: info@sek.us.com

Fax: 630-762-0607

800-932-3343 I www.sek.us.com

Revised 03/03/11

SB-442 Technical Data Sheet_Layout 1 3/3/11 3:09 PM Page 2