View
6
Download
0
Category
Preview:
Citation preview
SAUTER EGP100.Measures differential pressure precisely and is easy to fi t.
2
Precision in every detail: for a complete energy-effi cient solution with the SAUTER EGP100.
A versatile range of applications combined with absolute accuracy.
Anyone with a commitment to energy effi ciency thinks in integrated terms. And anyone who wants to be successful at energy effi ciency will also examine every detail of the system. The SAUTER EGP100 incorporates the lengthy experience and quality awareness that we have acquired from devising complete solutions and from developing the instruments required to implement them. This trans-ducer for differential pressure can be used wherever there is a call for pressure monitoring with uncompromising precision. Examples include:• Air-conditioning• Medical technology• Environmental technology• Laboratories and clean rooms
Exceptional requirements? Not a problem.
The accurate measurement of positive, negative or differential pressure in gases has been optimised in the new SAUTER EGP100 so that it can bring all its strengths to bear when monitoring fi lters, ventilation ducts and ventilation sys-tems – even when the air contains dust or is contaminated with chemicals. Ad-ditional benefi ts include control of frequency converters to regulate ventilation and level monitoring for fl uids.
3
A little large at fi rst sight, but on close inspection it’s just right.
Exact measurement using a double-membrane pressure sensor:
this high-calibre sensor will even detect the most minimal air
fl ows or differential pressures. A differential capacitive method
of measurement is used to evaluate the differential pressure and
make it available in the form of a linear electrical signal. Another
advantage of the membrane sensor is that it can be fi tted in any
position.
The zero point can be set at any time thanks to the inte-
grated potentiometer. The SAUTER EGP100 is also supplied
ex works with a calibration certifi cate. The variable fi lter
constant ensures that the output signal remains stable when
measurement is diffi cult.
Opening and positioning is easy. The cover closure with its
hook and the latch on the housing cover ensure simple and
safe handling for fi tting and maintenance. Minimum time
and effort are required, and no additional tools are needed.
IP 65 is included.
Servicing is easy thanks to the automatic cable feed, which
saves time and expense.
The choice is yours. You can mount the SAUTER EGP100 to
a wall or onto a top-hat rail as per the DIN standard: both
are possible.
Sen
sor
Pote
ntio
met
erH
ousi
ng
cove
rC
onne
ctio
nFi
ttin
g
Systems
Components
Services
Facility Management
AU ZU
ABFO
CI CIDO DODI DIAO AOAI AI
1 11
PDPD
1
LL
113
121
13
NN
1
NN
1
Rev.Rev.
121
13
NN
1
NN
1
Rev.Rev.
1
H%H%
1 11
T
1
T
1
H%
2
T
1
H%
1
A-0
-FU
7001
1310
003
W2
EGP100 transducer for di� erential pressure
Type EGP100F301 EGP100F401
Power supply 24 V ~/= 24 V ~/=
Measuring range 0...150 Pa 0...300 Pa
Power consumption 24 V ~ 24 V =
1.0 VA0.4 W
1.0 VA0.4 W
Parts in contact with media PC/ABS blend, MQ, CuSn6, FR4 PC/ABS blend, MQ, CuSn6, FR4
Output signal 0...10 V, load > 10 Ωk 0...10 V, load > 10 Ωk
Time constant, variable 0.05...2 sec. 0.05...2 sec.
Positional infl uence ± 1% FS 150 Pa ± 0.75% FS 300 Pa
Reproducibility 0.2% FS 0.2% FS
Non-linearity 1% FS pressure-linear 1% FS pressure-linear
Zero point stability < 0.3% FS < 0.3% FS
Ambient temperature 0...60 °C 0...60 °C
Type of protection IP 65 IP 65
Example of use
EGP100
EGP100
www.sauter-controls.comSubject to change. © 2009 Fr. Sauter AG
Recommended