Safety Relay Catalogue Products

8/10/2019 Safety Relay Catalogue Products

1/18

S a

f e t y r e

l a y s

Safety relaysSafety relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466

Programmable safety relays . . . . . . . . . . . . . . . . . . . . 473

Safety software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480

www.lcautomation.com


2/18

Safety relays www.lcautomation.com

Blackburn Office - 01254 685900 Chippenham Office - 01249 460099466

20% reduction in wiring.Contact expansion viaconnectors

Rapidinstallations innovativespring-loaded

terminals,chambersoperatedindividually

Maximum flexibility.Operating modes and

timer functions areselectable

Diagnostics inseconds via 6LEDs no

externalmeasuringdevicesrequired

Simpleconfiguration,

designationand positionof the

terminals is the same onall unit types

Rapid assembly

via spring clips,no need for tools

Safe from manipulation,setting elements have alockable cover

Pilz multi functional PNOZsigma range of compact safety relays are easy toinstall and expand with improved switching capacity from as little as12.5mm wide.Ideal for machine builders and panelbuilders, these fourth generationsafety relays incorporate a number of features and internationalapprovals (important for export).

They also offer significant costsavings because less units nowcover a wider range of applications,reducing your stock holding.

A combination of jumper connectedexpansion modules and spring loadedcage clamp terminals can also reduceyour wiring time by up to 20%.To increase the number of safetyoutputs use the PNOZsigmaexpander modules see page 468.

The safety relays provide diagnosticsin seconds using the LED indicationpanel, displaying:

Power Input status

Switch statusResetFault

PNOZsigma safety relays range overview

Key features and benefits of thePNOZsigma range


3/18


467Blackburn Office - 01254 685900 Chippenham Office - 01249 460099

Technical specification

PNOZs1 PNOZs2 PNOZs3 PNOZs4 PNOZs5 PNOZs6Input channels 1 1 1 and 2 2 2 2

Safety outputs 2 NO 3 NO 2 NO 3 NO 2 NO 3 NOSafety outputs (timed) 2 NO

Time delay range 0-300 seconds

Auxiliary outputs 1 NC 1 NC 1 NCSemi conductor outputs 1 1 1 1 1 1Input options:

Emergency stop

Safety gate switch

Light curtain

Two-hand control Reset Manual Manual/monitored Monitored Manual/automatic Manual/automatic Manual

Start Automatic Automatic Start-up test Start-up test Start-up test Supply voltage 24V d.c. 24V d.c. 24V d.c. 24V d.c. 24V d.c. 24V d.c.

Universal power supply 48-240V a.c./d.c. 48-240V a.c./d.c. External fast fuse rating 4A 4A 4A 6/10A 6A 6A

Connections Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in

Housing width (mm) 12.5 17.5 17.5 22.5 22.5 22.5

PFHD 2 x 10-7 2.5 x 10 -9 2.31 x 10 -9 2.31 x 10 -9 2.31 x 10 -9 2.62 x 10 -9

PFHD (delayed) 2.14 x 10 -9 Safety category Cat 2 Cat 2 Cat 4 Cat 4 Cat 4 EN574, Typ IIICPerformance Level PLd PLd PLe PLe PLe PLeSIL claim SIL CL2 SIL CL3 SIL CL3 SIL CL3 SIL CL3 SIL CL3

Can be connected

PNOZs1PNOZs2PNOZs3PNOZs4

PNOZs4, universal voltage

PNOZs5

PNOZs5, universal voltagePNOZs6

Description

750101 PNOZS124VDC 93.47750102 PNOZS224VDC 110.48750103 PNOZS324VDC 114.73750104 PNOZS424VDC 148.73

750134 PNOZS4/48-240VAC/DC 157.22

750105 PNOZS524VDC 216.72

750135 PNOZS5/48-240VAC/DC 222.51750106 PNOZS624VDC 250.71

Screw terminals

ListIdent No Order Code Price

751101 PNOZS1C24VDC 93.47751102 PNOZS2C24VDC 110.48751103 PNOZS3C24VDC 114.73751104 PNOZS4C24VDC 148.73

751105 PNOZS5C24VDC 216.72

751106 PNOZS6C24VDC 250.71

Spring-loaded terminals


PNOZsigma safety relays

To increase the number of safety outputs use PNOZsigma expander modules, see next page

s1 s4 s5 s6s2 s3


4/18



PNOZsigma contact expander modulesTechnical specification

PNOZs7 PNOZs7.1 PNOZs7.2 PNOZs8 PNOZs9 PNOZs10 PNOZs11 PNOZs22Safety outputs 4 NO 3 NO 4 NO 2 NO 3 NO 4 NO 8 NO 2 x 3 NOSafety outputs (timed) Time delay range 0-300 seconds

Auxiliary outputs 1 NC 1 NC 1 NC 1 NC 1 NC 2 NCSemi conductor outputs 1 1 1 1 Compatible relays:

PNOZelog

PNOZmulti

PNOZsigma

PNOZmm0.1p

PNOZmm0.2p

PNOZ X

Supply voltage 24V d.c. 24V d.c. 24V d.c. 24V d.c. 24V d.c. 24V d.c. 24V d.c. 24V d.c.External fast fuse rating 6A 6A 6A 4A 6A 10A 10A 6A Connections Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-inHousing width (mm) 17.5 17.5 17.5 12.5 17.5 45 45 22.5

PFHD 2.31 x 10 -9 2.31 x 10 -9 2.31 x 10 -9 2 x 10-7 2.34 x 10 -9 2.31 x 10 -9 2.31 x 10 -9 2.31 x 10 -9

Safety category* Cat 4 Cat 4 Cat 4 Cat 2 Cat 4 Cat 4 Cat 4 Cat 4Performance Level* PLe PLe PLe PLd PLe PLe PLe PLeSIL claim* SIL CL3 SIL CL3 SIL CL3 SIL CL2 SIL CL3 SIL CL3 SIL CL3 SIL CL3

*The category that can be achieved depends on the category of the base unit. The contact expander module may not exceed this.

s7 s8 s9 s10 s11 s22

PNOZsigmacontact expander modules areused to increase

the number of contacts availableon a base unit'sinstantaneoussafety contacts.

PNOZs7PNOZs7.1PNOZs7.2PNOZs8PNOZs9PNOZs10PNOZs11PNOZs22

Description

750107 PNOZS724VDC 97.73750167 PNOZS7124VDC 93.47750177 PNOZS7224VDC 102.78750108 PNOZS824VDC 84.99750109 PNOZS924VDC 131.73750110 PNOZS1024VDC 161.47750111 PNOZS1124VDC 161.47750132 PNOZS2224VDC 157.52

Screw terminals


751107 PNOZS7C24VDC 97.73751167 PNOZS71C24VDC 93.48751177 PNOZS72C24VDC 101.97751108 PNOZS8C24VDC 84.99751109 PNOZS9C24VDC 131.73751110 PNOZS10C24VDC 161.47751111 PNOZS11C24VDC 161.47751132 PNOZS22C24VDC 163.50

Spring-loaded terminals



5/18



PNOZs30 with screw terminals 750330 PNOZS3024VDC 628.32PNOZs30C with spring loaded terminals 751330 PNOZS30C24VDC 628.32

PNOZs30 Safe speed monitorFeatures

Provides safe monitoring of standstill,rotational speed, position, speedrange, direction of rotation, andbroken shearpinFeedback from incremental encoder (to RJ45)Feedback from proximity sensors(terminals)

Advance warning of shutdown when threshold is reachedProductivity is increased byavoiding unnecessary completeshutdown of processesParameters are quickly entered by push & turn rotary knob, and storedon chipcardExpansion interface for 2 moreexpansion unitsDisplays current frequency, currentposition, warning & error messages

FeaturesMonitors back EMF from single or

three phase motorsNo external inputs other thanconnection to the motor windings arerequiredSingle or dual channel monitoring2 safety outputs are enabled when

the back EMF falls below the threshold level

Detects open circuits

Technical specificationSupply voltage . . . . . . .24V-240V a.c./d.c.Inputs . . . . . . . . . . . . . . . . . . . .1 channelSafe outputs . . . . . . . . . . . . . . . . . 2 NO

Auxiliary outputs . . . . . . . . . . . . . . 2 NCExternal fast fuse rating . . . . . . . . . . .6A Connections . . . . . . . . . . . . . . . . .Plug in

(either spring-loaded or screw terminal)Housing width . . . . . . . . . . . . . . . .45mm

Technical specificationSupply voltage . . . . . . 24V-240V a.c./d.c.Inputs . . L1, L2, L3 from monitored motor Switch threshold . . . . . 0-0.5V or 0-0.3V Sensitivity adjustment . . . . . . Via front dialSafety contacts . . . . . . . . . . . . 2 N/O, 4A

Auxiliary contacts . . . . . . . . . . . . . 1 N/C2 x semiconductor

LED indication . . . . . . . . . Power, output, fault & channels

Connection . . . . . Screw or spring loaded

ListDescription Ident No Order Code Price

PSWZX1PC, 0.5V with spring loaded terminals 787949 PSWZX1PC05V 381.95PSWZX1P, 0.5V with screw terminals 777949 PSWZX1P05V 344.85PSWZX1PC, 0.3V with spring loaded terminals 787950 PSWZX1PC03V 337.72PSWZX1P, 0.3V with screw terminals 777950 PSWZX1P03V 344.85


1 input monitoring

Cat 2EN 954-1 Category3.28 x 10-8PFHD

PLdEN ISO 13849-1 Performance LevelSIL CL 2EN 62061 SIL Claim

2 input monitoring

Cat 3EN 954-1 Category1.50 x 10-8PFHD

PLeEN ISO 13849-1 Performance LevelSIL CL 3EN 62061 SIL Claim

Cat 4EN 954-1 CategoryPLeEN ISO 13849-1 Performance Level

SIL CL 3EN 62061 SIL Claim

PSWZX1P Standstill detection safety relay

The device uses two separatemeasuring channels to measure theregenerated voltage, induced from

the motor during the rundownperiod or during start-up.If the voltage falls below the setresponse value (standstill threshold),

the standstill monitor enables themonitored plant. If the voltageexceeds the set release value, the

standstill monitor disables themonitored plant. To reactivate, the voltage at both channels must fallbelow the response value U on within

the time t g.

NEW


6/18



Safety relay with 1 time delay output SRB-211ST-V.2-24VAC/DC 296.36Safety relay with 2 time delay outputs SRB-324-ST-V.2-24VAC/DC 303.27

Safety relays with time delay outputs

This range of safety relays have theaddition of either one or two timedelay contacts which are adjustablefrom 1 to 30 seconds. The relaysare used for applications where astop request is initiated to allow arun down of a rotating hazardbefore a second stop request halts

the machine.

Technical specificationSupply voltage . . . . . . . . . . . 24V d.c./a.c.Outputs

SRB211ST . . . 2 safety contacts 250V a.c. 8A 1 auxiliary contact 250V a.c. 6A

SRB324ST . . . 3 safety contacts 250V a.c. 8A 2 auxiliary contacts 250V a.c. 6A

Signal output . . . . . . . 1 24V d.c. 100mA Connection type . . . . . . . Screw terminalMounting . . . . . . . . . . . . . . . . . . DIN railDimensions

SRB211ST . . . h100 x w22.5 x d121mm

SRB324ST . . . . h100 x w45 x d121mmPFH value

STOP 0 . . . . . . . . . . . . . 2.00 x 10 -8 /hSTOP 1 . . . . . . . . . . . . . 2.00 x 10 -7 /h

ListDescription Order Code Price

FeaturesFor use with emergency stops,solenoid interlocks, safety switchesand light curtains1 or 2 channel controlInstantaneous safety contacts (STOP 0)Time delay safety contacts (STOP 1)1 transistor signalling outputLED status indicationPlug-in screw terminalsEDM external device monitoringMonitored inputs

2 NC contacts Wire breakage detectionEarth connection detection

Safety relay with manual trailing edge reset S RB301-MA-24VAC/DC 129.27Safety relay with automat ic reset SRB301-MC-24VAC /DC 144.61Safety relay with eith er manual trailing edge or SRB301-ST-V.2-24VAC/DC 205.95automatic reset

Universal safety relays

Universal safety relays that can beused in a wide range of applications. They are ideal for

holding as spares and can be used with any type of safety device witheither manual or automatic reset.

FeaturesFor use with emergency stops,position switches, solenoid interlocks,magnetic safety switches and

light curtainsInstantaneous safety contacts (STOP 0)1 signalling output (SRB301-ST-V.2)LED status indication1 or 2 channel monitoringShort circuit protectedEDM external device monitoring


Technical specificationSupply voltage . . . . . . . . . . . 24V d.c./a.c.Outputs . . 3 safety contacts 250V a.c. 8A

1 auxilliary contact 24V d.c. 2A

Signalling output . . . . 1, 24V d.c. 100mA (SRB301-ST-V.2)Connection type . . . . . . . Screw terminalMounting . . . . . . . . . . . . . . . . . . DIN railDimensions

SRB301-MA . . . . h100 x w22.5 x d121mmSRB301-MC . . . . h100 x w22.5 x d121mmSRB301-ST-V.2 . . h120 x w22.5 x d121mm


SIL CL 3EN 62061 SIL Claim20 yearsMission Time



Cat 3EN 954-1 CategoryPLdEN ISO 13849-1 Performance Level


STOP 0 STOP 1


7/18



Two hand control relay SRB201-ZH-24VDC 210.43

Two hand control relay

Designed to be used with two handcontrol stations.

Inputs for each channel must be aNO/NC and the monitor ensures

they are made within the required time scale. If the sequence is notcorrect, start up will be prevented.


Technical specificationSupply voltage . . . . . . . . . . . . . . 24V d.c.Monitored inputs

2 NC/2NO contacts

Short circuit recognition Wire breakage detectionEarth connection detection

Outputs . . 2 safety contacts 250V a.c. 6A 1 auxiliary contact 24V d.c. 2A

Connection type . . . . . . . Screw terminalMounting . . . . . . . . . . . . . . . . . . DIN railDimensions . . . h100 x w22.5 x d121mmPFH value . . . . . . . . . . . 2.00 x 10 -8 /h

FeaturesMonitoring two-hand control panels

to EN 574 III CInstantaneous safety contacts (STOP 0)

1 auxiliary NC contact withantivalent functioning principle(auxiliary contacts are not to be usedin safety circuits)Feedback circuitElectronic protectionLED status indicationPlug-in screw terminalsEDM external device monitoring

Safety relay SRB301-AN-V.2-24VAC/DC 213.81

Safety relay for 1 NO/1 NC safety switches

SRB310AN is an antivalent safety relay for monitoring 1 NO/1 NCinput devices such as BNS magneticswitches. It ensures the switch haschanged state and can also preventsingle channel faults in someapplications. The relay monitors achange of contact status from NC

to NO in one channel and vice versa in the second channel.

Technical specificationSupply voltage . . . . . . . . . . . 24V d.c./a.c.Monitored inputs . . . . . . . . . 1 NC/1NO

contacts, short circuit, wire breakage and earth connection

Outputs . . 3 safety contacts 250V a.c. 6A 1 auxiliary contact 24V d.c. 2A

Connection type . . . . . . . Screw terminalMounting . . . . . . . . . . . . . . . . . . DIN railDimensions . . . h100 x w22.5 x d121mmPFH value . . . . . . . . . . . 2.00 x 10 -8 /h


FeaturesMonitoring of range magnetic safety sensorsInstantaneous safety contacts (STOP 0)1 signalling outputShort circuit recognition

Additional contacts using an inputexpander module (see page 472)LED status indicationEDM external device monitoring



Cat 4EN 954-1 Category PLeEN ISO 13849-1 Performance LevelSIL CL 3EN 62061 SIL Claim20 yearsMission Time


8/18



FeaturesConnect up to 4 switches per interface, e.g. BNS safety magneticswitches, emergency stop controldevices, interlocking devices and

AOPDsConnection of switches with 2 NCcontacts (PROTECT-PE-02) or of switches with NC/NO contacts(PROTECT-PE-11)Crosswire monitoring of the inputcircuits (only PROTECT-PE-02)Signalling output for each switchCascading possible for the connectionof up to 80 switches6 LED to show operating conditions

Features

For signal processing of potential freeoutputs, e.g. command devices2 channel control1 safety contact, STOP 0Time adjustable from 3s to 30sSignal processing with trailing edge4 LEDs to show operating conditions Safety relay with double reset SRB100DR-24VAC/DC 141.73

Safety relay w ith double reset

SRB100DR is a special time relay with a double reset used for the safepassage of machine operators in

robot cells where it can be possible to restart a machine without theperson in the cell being spotted.By using a pushbutton in the cell theoperator must make sure the cell isclear before a restart is made. Once

the first pushbutton is activated, theoperator must activate the secondreset button within a set time, toensure a start is made. If the time

frame is exceeded the sequence muststart again.

Technical specificationSupply voltage . . . . . . . . . . . 24V d.c./a.c.Monitored inputs . . . . . . 2 NC contacts,

short circuit, wire breakageand earth connection

Output . . . . 1 safety contact 250V a.c. 6A Connection type . . . . . . . Screw terminalMounting . . . . . . . . . . . . . . . . . . DIN railDimensions . . . h100 x w22.5 x d121mm


4 x 2 channel inputs, 2 NC or OSSD input devices PROTECT-PE-02-SK 87.554 x 2 channel inputs, 1 NO/1 NC input devices such PROTECT-PE-11-SK 67.01as magnetic switches

Protect PE Input expander modules

Protect PE expander modules allowup to 4 additional inputs to beconnected to a safety relay.The input units are suitable for either 2 NC inputs or 1 NC/1 NO input

types. All units have a non safetyoutput to allow the status of the input

to be fed back to a PLC or other control system.Each individual input is monitored for short circuits & open circuit detection.

Technical specificationSupply voltage . . . . . . . . . . . . . . 24V d.c.Monitored inputs . . . . . . . . 4 x 2 channel

see order code for configurationshort circuit, wire breakage and

earth connectionOutputs . . 2 auxiliary contact 24V d.c. 2A

7 signalling outputs 24V d.c. 100mA Connection type . . . . . . . Screw terminalMounting . . . . . . . . . . . . . . . . . . DIN rail

Dimensions . . . . . h126 x w48 x d43mm







9/18



FX3-CPU0 Flexi Soft controller 1043783 132.44FX3-CPU1 Flexi Soft controller with 2 EFI connections 1043784 187.98FX3-MPL0 Flexi Soft memory plug 1043700 21.13FX3-MPL1 Flexi Soft memory plug for ProfiNet 1047162 28.82FX3-XTDI Flexi Soft 8 input module 1044124 141.82FX3-XTIO Flexi Soft 8 input/4 output module 1044125 205.07FX0-GCAN Flexi Soft CANOpen Gateway 1044076 295.80FX0-GENT Flexi Soft Ethernet/IP Gateway 1044072 311.85FX0-GETC Flexi Soft EtherCAT Gateway 1051432 311.85FX0-GMOD Flexi Soft Modbus TCP Gateway 1044073 311.85FX0-GPNT Flexi Soft ProfiNet IO Gateway 1044074 311.85FX0-GPRO Flexi Soft ProfiBus-DP Gateway 1044075 311.85

Flexi Soft safety control system

Technical specificationNumber of inputs . . . . . . . . . . . . . 0-96,

depending on module combinationNumber of outputs . . . . . . . . . . . . 0-48,

depending on module combinationNumber of EFI interfaces . . . . . . . . . . 2Configuration interface . . . . . . . . RS232Logical functions . . . . . AND, OR, NOT,

XNOR, XOR Safety functions . . . . . . . Emergency stop

function, machine control(e.g. PSDI), differentiation

between man and material(muting), control modes

and operating mode selectionConnection type . . . . . . . M12 8-pin plugDimensions . h93.7 x w22.5 x d120.8mmOperating temperature . . . . 0 to +50C

Flexi Soft is a programmable andexpandable safety control systemcapable of being integrated into

various networks.The main FX3-CPU system modulemonitors and processes all inputsignals via the safety logic stored in

the memory plug. These signals thenswitch outputs on the system

through the FLEX BUS+ interface which connects all the units together.The main unit has an RS232 interface

which can be used to upload or

change the Flexi Soft system settings.It can also be used for permanentdiagnosis, using a PLC or HMI for example.

The FX3-CPU1 version of the mainmodule also has 2 EFI-connections.The EFI interface (enhancedfunction interface) is a two wirecommunication between the safety sensor and controller. All EFIsensors can be connected toFlexi Soft, be accessed and

programmed via the Flexi Soft

sRS232 connection.The input/output extension moduleFX3-XTIO has 8 safety inputs and4 safety outputs.The input expansion moduleFX3-XTDI has 8 safety inputs.


FeaturesCompact, 22.5 mm widthRS232 connection for configurationand real-time diagnosticsSystem plug stores the configurationof the safety controller

Available with EFI interfaceSafety networking of up to fourFlexi Soft stationsUp to 12 input or input/outputexpansion modules can beconnected in one systemExpandable with up to two gatewaysper system rack

BenefitsLess downtime due to gateways,e.g., ProfiNet I/O, ProfiBus-DP,EtherCAT, CANopen, Modbus TCPand Ethernet (TCP/IP)Safe communication withoutadditional hardware reduces costsand saves timeRS232 connection is standard withall main modules, enabling real timediagnostics for fast commissioning,faster troubleshooting andreduced downtime

FX3-CPU Comms module Input module Output module

PLeEN ISO 13849-1 Performance LevelSIL CL 3EN 62061 SIL Claim


10/18



PNOZmulti MiniFeatures

Configurable inputs and outputs usingPNOZmulti Configurator software,

via chip card or mini USB interface

Compact design, only 45mm wideIntegrated display and customisable

textSave up to 40% time and cost inengineering phasesLess wiring saves control panel spaceNon-expandable version is suitablefor 3-6 safety functionsExpandable safety functions is idealfor 4 or more safety functions or

where distributed control is required

Expandable units can connect up tofour Safe link modules, one EthernetTCP/IP module and one serial module- to the left, and PNOZSigmaexpander modules - to the rightSafe link modules connect any combination of PNOZmulti andPNOZmulti Mini to createnetworked, distributed safe controlUsing safe link modules for PDP67 F8DI ION decentralised input/outputsmodules, a maximum of 64 dualchannel remote outputs can beconnected (using 4 Safe link modules)

Simple overview;via 6 LEDs no external measuringdevices required

Rapid assemblyvia spring clips;no need for tools

Rapid installation;spring-loadedterminals, chambersoperated individually(with optional screwterminals)

Simple diagnostics;integrated display forshowing informationand diagnostcs

Simple configurationwith the PNOZmulti

Configurator via astandard USB interface

Values are easy torequest thanks to a rotary

knob with key function(push and turn)

Safe frommanipulation;

setting elements havea lockable cover andpassword protection



Non-expandable multi Mini 772000 PNOZmm0p 392.70Expandable multi Mini 772001 PNOZmm0.1p 417.13Expandable multi Mini; built in Safe link 772002 PNOZmm0.2p 503.59Safe link module 772020 PNOZmml1p 182.96Safe link module for PDP67 F 8DI ION 772021 PNOZmml2p 180.84Ethernet module 772030 PNOZmmc1p 152.46Serial comms module 772031 PNOZmmc2p 86.77

750008 19.04750008 19.04750008 19.04750004 14.27750004 14.27750004 14.27750004 14.27

751008 19.04751008 19.04751008 19.04751004 14.27751004 14.27751004 14.27751004 14.27

List List ListDescription Ident No Order Code Price Order Code Price Order Code Price

Screw terminals Spring-loaded terminals

Technical specificationHousing width . . . . . . . . . . . . . . . 45mmSupply voltage . . . . . . . . . . . . . . 24V d.c.Safe outputs . . . . . . . . . . . . . 4 solid stateSafe inputs . . . . . . . . . . 20 single channel

(can also be configured as standard[non-safe] inputs)

Test pulses . . . . . . . . . . . . . . . . . . . . . . 4Connections . . . . . . . . . . . . . . . . . Plug in


11/18



Non-expandable PNOZ Multi 773110 PNOZm0p 420.09Expandable PNOZ Multi 773100 PNOZm1p 636.50Expandable PNOZ Multi; with Ethernet TCP/IP 773103 PNOZm1pETH 881.93Expandable PNOZ Multi; for press applications 773120 PNOZm2p 755.31Expandable PNOZ Multi; for burner management 773125 PNOZm3p 874.381 set spring loaded terminals 783100 15.28

1 set plug in screw terminals 793100 15.28Bus terminator 779110 6.12

PNOZmulti base units

The configurable control systemPNOZmulti is multifunctional,freely configurable and tailormadefor use in many different areas of mechanical engineering.

As your plant expands, the modular PNOZmulti simply expands with it,adding up to eight expansionmodules in any combination to suityour specific requirements: Input and output modules Fieldbus modules Safe speed and standstill monitorsSafe link modules for safely

connecting several base units

Safe analogue modules for safelyconnecting decentralised periphery

Flexible application with modular expandabilityUp to 90 I/Os (basic- plus

expansion modules)Up to 8 incremental encodersUp to 8 safety analogue inputsUp to 4 PNOZmulti to PNOZmulti

safety connectionsUp to 16 decentralised

PDP67-modules64 dual channel decentralised inputs1 fieldbus-module

FeaturesConfigurable inputs and outputs usingPNOZmulti Configurator software,

via chip card or mini USB interface

Save up to 40% time and cost inengineering phasesLess wiring saves control cabinetspace

Technical specificationHousing width . . . . . . . . . . . . . . 135mmSupply voltage . . . . . . . . . . . . . . 24V d.c.Safe outputs . . . . . . . . . . . . . 4 solid state

+ 2 relay (2 contacts)Safe inputs . . . . . . . . . . 20 single channelTest pulses . . . . . . . . . . . . . . . . . . . . . . 4

Connections . . . . . . . . . . . . . . . . . Plug in




Safe link module 773540 PNOZml1p 168.03 793400 4.24 783400 4.24



PNOZmulti Safe link modules Where required, up to four PNOZmulti base units can be used

to monitor and control morecomplex machinery. In this case,

the Safe link module enables data

to be exchanged between thePNOZmulti base units. With the modular PNOZmulti, up tosix PNOZ ml1p link modules can beconnected to each base unit (in either ring or tree structure).

Using the PNOZmulti Configurator,you can quickly and easily allocate theinformation to be transferred,

without specialist knowledge of safebus systems, or specifically addressing

the devices.

Technical specificationConnections . . . . . . . . . . . . . . . . . Plug in

Machine 1 Machine 2 Machine n

4-core cable4-core cable




12/18



PNOZmulti input expansion modulesFeaturesPNOZ ma1p (analogue)

Range monitoring (4 range limits canbe configured)

Threshold value monitoring (8 limit values can be configured)Input voltage range: -10.24 to+10.2375V Input current range: 0-25.59mA Installed to the left of the base unit

A maximum of 4 PNOZ ma1p unitscan be connected to the base unitStatus indicators

PNOZ mi1p / mi2p (digital) A maximum of 8 input modules canbe connected to the base unit

Connect to base unit using jumperson the back of the unit


PNOZmulti output expansion modulesFeaturesPNOZ mo1p

4 safe semiconductor outputs(2A, 24V d.c.)

PNOZmo2p:2 N/O safe outputs (6A, 24V)

PNOZmo3p:2 safe semiconductor outputs(2A, 24V d.c.)

PNOZmo4p:4 N/O safe outputs (6A, 24V)

PNOZmc1p:16 non-safety, auxiliary outputs


A maximum of 8 modules can beattached to an expandablePNOZmulti base unit (on the right).

You cannot connect more than 6semiconductor safe output modulesper base. All expansion modulesconnect to the base using jumpers on

the back of the unit.


SILCL 3EN 62061 SIL Claim



2 safe analogue input module 773812 PNOZma1p 337.778 safe digital input module 773400 PNOZmi1p 134.948 standard digital input module 773410 PNOZmi2p 112.02

793700 5.09793400 4.24793400 4.24

783700 5.09783400 4.24783400 4.24



4 safe semiconductor outputs 773500 PNOZmo1p 181.622 N/O safe outputs 773520 PNOZmo2p 144.272 safe semiconductor outputs 773510 PNOZmo3p 193.494 N/O safe outputs 773536 PNOZmo4p 157.0016 standard (non-safety) auxiliary outputs 773700 PNOZmc1p 229.31

793400 4.24793520 2.13793400 4.24793536 4.24793700 5.09

783400 4.24783520 2.13783400 4.24783536 4.24783700 5.09




13/18



EtherCAT module 773710 PNOZmc2p 428.95Profibus module 773732 PNOZmc3p 312.09DeviceNet module 773711 PNOZmc4p 313.53CANopen module 773712 PNOZmc6p 342.04CC-link module 773726 PNOZmc7p 395.54Ethernet IP/Modbus TCP module 773730 PNOZmc8p 398.54Profinet IO module 773731 PNOZmc9p 398.54

PNOZmulti fieldbus communication modules


Fieldbus communication modulescan help to integrate thePNOZmulti into your machine or plant control network.

All these modules can be configuredusing the PNOZmulti Configurator.Please note; only one commsmodule can be connected per PNOZmulti base unit.

The speed monitor canindependently monitor two axesfor standstill, speed and directionof rotation.

The speed monitor signals the statusof the monitored values to the baseunit. Depending on the safety circuitloaded, the values can be transferred

from the base unit to a relay output ona safety system, for example.Incremental encoders or proximityswitches can also be used to record

the values.

PNOZmulti safe speed and standstill monitor

Features

Monitoring of 2 independent axesConnection (per axis); 1 incrementalencoder, or 2 proximity switches, or 1 incremental encoder and1 proximity switch

Measured variables:StandstillSpeed (8 values can be set)Direction of rotation

Technical specificationInputsProximity switch . . . . N/O PNP, 24V d.c.Encoder . . . . Incremental with differential

output A + B supply 12-30V d.c.Input frequency . . . . 0.1-3kHz proximity

0.2-200kHz encoder Output signals . . . . . . . . . . . . . Standstill

over speed and faultIndication . . . . . . . . . . . . . . . . . Standstill

over speed and faultConnectionEncoder . . . . . . . . . . . . . . . . . . . . . RJ45Power and proximity . . . . . . . . . . Plug in

Cat 3EN 954-1 Category PLeEN ISO 13849-1 Performance LevelSIL CL 3EN 62061 SIL Claim

NEW

PNOZmulti Configurator

See page 480 for further details

Graphic tool for configuration and

programming of the PNOZmulti.

2 axis safe speed and standstill monitor 773815 PNOZms2pHTL 459.33RJ45 cable; 5m (for encoder) 773856 15.28

793800 2.54

783800 3.10




14/18



Decentralised input/output module

Up to 4 safety devices of any typecan be added to one decentralisedinput/output module. A network of up to 4 blocks can be built over 400m, and up to 4 networks can beconnected to one PNOZmulti or PNOZmulti Mini providing up to 64remote dual channel safety circuits.The decentralised input/outputmodules connect to PNOZmulti or PNOZmulti Mini via the Safe link module (see below).

FeaturesOne cable for communication andpower to a configurable PNOZmultior PNOZmulti Mini safety relay

8 single channel outputs can beconfigured as safe inputs, or standardoutputs (for monitoring)4 x M12 female 5 pin socketsfor connection to PSEN codeddevices, or non-coded devices1 x M12 male 5 pin failsafe socket for connection to PNOZmulti/Mini1 x M12 female 5 pin signalcascading socket2 x LEDs for sensor status andpower indication

Up to 4 Safe link modules can beadded to each PNOZmulti/MiniHigh power version also includes 2 xM12 24V d.c. ports for light curtaininputs and solenoid interlock outputs

Technical specificationConnection to PNOZ . . . . . M12 female

5 pin to open ended cablesConnection to PSEN . . . . . . M12 female

to M12 male cablesSupply voltage . . . . . . . . . . . . . . 24V d.c.(Note: When cascading volt drop limits to be observed)Current capacity . . . . . . . . . . . . . . . . 2A LED indication . . . . . . . . Response range

and locking commandProtection rating . . . . . . . . . . . . . . . IP67

Ambient temperature . . . -40 to +60CDimensions . . . . . h120 x w60 x d20mm

PDP67 F 8DI ION multi I/O interface 773600 136.84PDP67 F 8DI ION HP multi I/O interface high power version 773601 184.84


The Safe link module PNOZml2p enables safe inputs to beconveniently distributed acrossa machine, reducing cabling

time, effort and cost with theadded benefit of improveddiagnostics.


PNOZm12p Safe link module



M12, 5 pin, open 630311 15.70 630297 47.42

List List List List ListDescription Order Code Price Order Code Price Order Code Price Order Code Price Order Code Price

5m

630310 13.60

3m 30m

630312 22.09

10m

630298 33.47

20m

PNOZmulti connection cables

Safe link module for PDP67 F 8DI ION 773602 PNOZml2p 182.56 793400 4.24 783400 4.24



M12-M12, 5 pin, angled*M8-M12, 4 pin, angled

380213 30.29380205 21.61

380215 59.93380207 51.26

List List List ListDescription Order Code Price Order Code Price Order Code Price Order Code Price

5m

380212 27.91380204 19.24

2m 30m

380214 36.22380206 27.54

10mPSEN connection cables

*Can also be used for cascading the PDP67 F 8DI ION modules.


15/18



Reduce installation and wiringcosts, and increase machinemodularity and diagnostics by linking up to 4 coded safety devices(e.g. PSENcode, PSENslock)

through one passive decentralisedsafety module on the machine.

FeaturesOne cable for communication and

power to a PNOZSigma or PNOZmulti safety relay Maximum performance levelPLe (ENISO13849-1)4 x M12 female 8 pin sockets for connection to PSEN coded devices1 x M12 female 8 pin failsafe socketfor connection to PNOZ relay 1 x M12 female 8 pin signal socket for connection to standard controlsystem (e.g. PLC)LEDs for sensor status indication

(sensor status and locking) and power Supplied with 1 x PDP connector csfor cascading or connection to PNOZ(requires a separate cable); labels and4 blanking plugs for unused sockets

Technical specificationConnection to:

PNOZ . . . . . . . . . . . . . . . . . . M12 male8 pin to open ended cables

PSEN . . M12 female to M12 male cablesSupply voltage . . . . . . . . . . . . . . 24V d.c.(Note: When cascading volt drop limits to be observed)Current capacity . . . . . . . . . . . . . . . . 2A 2 LED indication . . . . . . Response range

and locking commandProtection rating . . . . . . . . . . . . . . . IP67

Ambient temperature . . . -40 to +60CCascading cable . . . . . PDP67 connector

F4 cs adapter (supplied)

Dimensions . . . . . h120 x w60 x d20mm

Decentralised passive safety modules forcoded safety devices

PDP67 F4 code (passive junction) 773603 73.30PDP67 connector F4 cs (spare for cascading) 773610 16.63


M12, 8 pin, open 540320 17.67 540326 59.13


5m

540319 14.83

3m 30m

540321 24.12

10m

540333 47.79

20m

PNOZ connection cables

M12-M12, 8 pinPSEN adaptor

540341 29.09380301 22.25

540344 66.12380301 22.25


5m

540340 26.66380301 22.25

2m 30m

540342 37.74380301 22.25

10m

540343 66.53380301 22.25

20m

PSEN connection cables


16/18



PNOZmulti tool kit 779000 118.82Basic single user licence 773010B 321.79


The tool kit contains theaccessories you need to start

working with PNOZmulti:Documentation folder with thePNOZmulti Configurator software(does not include a user licence)10 x 32Kb chip cardsChip card reader Configuration cable for readingdiagnostic data

Basic single user licence 773010B 321.79Upgrade licence 773010U 148.51RS232 programming cable 310300 29.25RS232 to USB adaptor 305160 42.45Chipcard 8Kb 779201 5.23Chipcard 32Kb 779211 7.39Chipcard reader 779230 38.19

PNOZmulti Configurator and accessories

Graphic tool for configuration andprogramming of the PNOZmulti. Project configuration, configuration

generation, documentation,commissioning

Data transfer via RS232 serial cableor chip card

User interface in German, English,French, Italian, Spanish, Japaneseor Chinese

The software is constantly evolving,but you can download the latest

version from www.pilz.co.uk/. You will also need to order a basic user licence from the price table below.

Function elements include:E-stops, safety gates, light curtains,muting, two hand control, enablingdevices, foot mats, zero/safe speed,analogue inputPress elements (e.g. operating mode,rotary cam)Burner managementPilz Visual (PVIS) expandeddiagnosticsMacros

Logic elements include:Boolean functions AND, OR, XOR,NOT, EQU, RS FLIP-FLOPTimers on and off delay, pulse trainsEvent counters


Standard PC requirementsOperating system: Windows 2000,

XP, Vista(32 Bit) or 7 (32 or 64 Bit)Processor: Minimum 1GHz

RAM: Minimum 1,024MbHard drive: 20Gb with a minimumof 15Gb of available disc space

PNOZmulti Configurator tool kit


17/18



PAScal safety calculator

PAScal allows users to validatesafety functions to both EN ISO13849-1 and EN/IEC 62061. Simple handling saves time

very easy to use compared toother tools on the market

Comprehensive componentdatabase

Simple import and updatefunction

Report Generator asdocumentary evidence(required by the standards)

The software is constantly evolving,but you can download the latest

version from www.pilz.co.uk/. You will also need to order a basic user

licence from the price table below. You can downloaded and run a demolicence version of PAScal, which givesyou access to just the essential

functionality. Purchasing a user licenceallows you to have more than threesafety functions per project and toedit reports after generation.

FeaturesCalculates the PFH D value of safety functions on plant and machinery The result is verified with the

prescribed performance level (PL) inaccordance with EN ISO 13849 or safety integrity level (SIL) inaccordance with EN/IEC 62061The graphical representation showshow individual components influenceoverall safety PAScal is compatible with a widerange of Sistema .SLB libraries, whichcan simply be imported

PAScal single user license 850050B 246.70Additional PAScal user license 850050K 183.87


Compatible with both

EN ISO 13849-1 andEN/IEC 62061


18/18


We supply highquality products from

these world leadingsuppliers . . .

www.lcautomation.com

Safety Relay Catalogue Products

Documents

KA 01-01-12-02 Catalogue Buchholz Relay-PRINCIPLES

Product Catalogue - Pacesetter Products · 2016-09-01Product Catalogue - Pacesetter Products

LUBRIT LUBRITA PRODUCTS CAA PRODUCTS CATALOGUE …

Products Catalogue 2010

Relay Catalogue Catalogue de Relais Catalogo de Relè

RELAYS AND RELAY DEVICES PRODUCTS AND APPLICATIONS … · RELAYS AND RELAY DEVICES PRODUCTS AND APPLICATIONS . INTRODUCTION | 2 3 INTRODUCTION 2 ... Circuit diagrams

European products catalogue 2018 - Johnson Controls · European products catalogue 2018 European products catalogue 2018 Controls, HVAC and Commercial Refrigeration products

New Products Catalogue

Spectronix Products Catalogue

Draminski Products Catalogue

New Display Relay Catalogue

Automation and Relay Functions - Catalogue 2003.12

Overload Relay Catalogue

ECC Products Catalogue

Elegantcasa products catalogue

Catalogue of products

Roadside Products Catalogue

Automotive Relay Connectors Electronic Packaging Relay ...€¦ · Automotive Relay Connectors | Electronic Packaging | Relay Sockets | DIN Rails | Terminal Blocks | Custom Products

GATEWAY PRODUCTS CATALOGUE

Products Catalogue