SABIT PMB · 2020. 10. 6. · sabit@saudibitumen.com | bitumen@saudibitumen.com SABIT PMB PAVEFLEX...

Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 2652524sabit@saudibitumen.com | bitumen@saudibitumen.com www.saudibitumen.com

SABIT PMB

Ref F05-21 Issue 1 PMB January 2020

TECHNICAL DATA

PROPERTIESPG64-10 PG70-10

230Flash Point, min., ºC1 ASTM D92

PG82-10PG76-10

230230 230

3.00Viscosity @135 ºC, maximum, Pa·s2 ASTM D44023.003.00 3.00

1.00Mass Change, maximum, %4 ASTM D28721.001.00 1.00

64MSCR, Jnr di�, ≤75%, test temperature, ºC 7 ASTM D74057670 82

64Dynamic Shear, G*/sin δ, minimum 2.20

KPa, test temperature @10 rad/s, ºC5 ASTM D71757670 82

MSCR, Jnr 3.2 test temperature, ºC ≤4.5 KPa-1 (S)≤2.0 KPa-1 (H)≤1.0 KPa-1 (V)≤0.5 KPa-1 (E)

6 ASTM D74057670 82

KPa, test temperature @10 rad/s, ºC3

ASTM D71757670 82

TEST METHODS

IntroductionSABIT PMB is a polymer modi�ed bitumen consisting of high-quality bitumen binder compounded with the highest quality elastomeric polymers and processed in a state-of-the-art mixing plant to obtain a totally consistent and homogenous PMB meeting the requirements of performance grade super-pave system.

SABIT PMB PRODUCTS are generally composed of elastomeric, plastomeric compounds and performance enhancing additives to achieve the best elastic e�ect and other required properties for PMB.

Note: Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.

(SABIT POLYMER MODIFIED BITUMEN, COMPLIES WITH AASHTO M320)

ORIGINAL BINDER

ROLLING THIN FILM OVEN (RTFO) RESIDUE

SABIT PMB

Ref F05-21 Issue 1 PMB January 2020

TECHNICAL DATA

PG82-10PG76-10

230230 230

64MSCR, Jnr di�, ≤75%, test temperature, ºC 7 ASTM D74057670 82

6 ASTM D74057670 82

ASTM D71757670 82

TEST METHODS

IntroductionSABIT PMB is a polymer modi�ed bitumen consisting of high-quality bitumen binder compounded with the highest quality elastomeric polymers and processed in a state-of-the-art mixing plant to obtain a totally consistent and homogenous PMB meeting the requirements of performance grade super-pave system.

SABIT PMB PRODUCTS are generally composed of elastomeric, plastomeric compounds and performance enhancing additives to achieve the best elastic e�ect and other required properties for PMB.

(SABIT POLYMER MODIFIED BITUMEN, COMPLIES WITH AASHTO M320)

ORIGINAL BINDER

Instruction for Application

Used in super-pave mix design for central plant of hot mix asphalt. General practices as outlined by the Ministry of Transport should be followed in mixing.

Coverage

It depends on the mix design.

Precautions

Care should be taken when heating SABIT PMB to avoid overheating.

Storage and HandlingHeating and storage procedures for PMB must be followed at all times.

Manufacturer's WarrantySubject to conditions and limitations of Saudi Bitumen Industries Co. Ltd.(SABIT) written warranty.

PackingInsulated PMB tankers.

FeaturesExcellent performance properties, improved resistance to rutting, shoving, stripping, water stripping, cracking and have excellent adhesionExhibits very good ageing and weathering resistanceExhibits good storage stability for 48 hours at 150-170 ºCIf required, it is easily reheated up to the needed temperature. It does not a�ect the quality in normal conditions.Easily to handle and no strong odor during heating and mixingLocally available in Saudi Arabia and delivered in very short noticeExcellent technical support and application or usage guidance, as well as after sales services available to the contractors

Note :Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the composition and/or utilization of its products without prior notice, consequently, orders will be �lled according to the latest speci�cations.

SABIT PMB PAVEFLEX 140

Ref F05-21 Issues PMB JANUARY 2020TECHNICAL DATA

PG82-10PG76-10

230230 230

1.00MSCR, Jnr di�, ≤75%, test temperature, °C7 ASTM D74051.001.00 1.00

6 ASTM D74056770 82

ASTM D71756770 82

TEST METHODS

Introduction

SBIT PMB PAVE FLEX 140 is a polymer modi�ed bitumen consist of the select bitumen binder that is modi�ed by the addition of PAVEFLEX 140 polymer, produced in a specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the require-ments of the performance grade of the super-pave system.

PAVEFLEXPRODUCTS generally composed of elastomeric, plastomeric, compounds and performance enhancing additives to achieve the best elastic e�ect and other required properties from PMB.

PAVEFLEX 140 polymer is used to produce all kind of PG Grading such as PG70-10, PG76-10 & PG82-10 according to proper percentage.

Used in super-pave mix design for acentral plants of hot mix asphalt. General practices as outlined by Ministry of Transport should be following in mixing.

Storage & Transportation

SABIT PMB PAVEFLEX 140 is to be stored in insulated tanks with proper heating and circulation system.Transportation of SABIT PAVEFLEX 140 should only be done by using insulated trucks, free from any signi�cant material which might contaminate and a�ect the product such as fuel, oil and emulsi�ed bitumen.

Coverage

Depends on the mix design.

Precaution

Care should be taken when heating SABIT PAVEFLEX 140 to avoid overheating.

(SABIT POLYMER MODIFIED BITUMEN COMPLIES WITH AASHTO M 320)

ORIGINAL BINDER

Features

Excellent performance properties, improved resistance to rutting shoving, stripping, water stripping, cracking and have excellent adhesion.Exhibits very good ageing & weathering resistance Exhibits good storage stability for 48 hours at 150-170°CIf required, it is easily reheated up to the required temperature. It doesn't a�ect the quality in normal conditions. Cost saving compared to currently used materials Easy to handle, with no hard smell during heating and mixing.Locally available in Saudi Arabia and delivered in very short time.Excellent technical support and application or usage guidance, as well as after sales service available to the contractors.

SABIT PMB PAVEFLEX 140

PG82-10PG76-10

230230 230

1.00MSCR, Jnr di�, ≤75%, test temperature, °C7 ASTM D74051.001.00 1.00

6 ASTM D74056770 82

ASTM D71756770 82

TEST METHODS

Introduction

SBIT PMB PAVE FLEX 140 is a polymer modi�ed bitumen consist of the select bitumen binder that is modi�ed by the addition of PAVEFLEX 140 polymer, produced in a specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the require-ments of the performance grade of the super-pave system.

PAVEFLEXPRODUCTS generally composed of elastomeric, plastomeric, compounds and performance enhancing additives to achieve the best elastic e�ect and other required properties from PMB.

PAVEFLEX 140 polymer is used to produce all kind of PG Grading such as PG70-10, PG76-10 & PG82-10 according to proper percentage.

Used in super-pave mix design for acentral plants of hot mix asphalt. General practices as outlined by Ministry of Transport should be following in mixing.

SABIT PMB PAVEFLEX 140 is to be stored in insulated tanks with proper heating and circulation system.Transportation of SABIT PAVEFLEX 140 should only be done by using insulated trucks, free from any signi�cant material which might contaminate and a�ect the product such as fuel, oil and emulsi�ed bitumen.

Coverage

Precaution

Care should be taken when heating SABIT PAVEFLEX 140 to avoid overheating.

ORIGINAL BINDER

Features

Excellent performance properties, improved resistance to rutting shoving, stripping, water stripping, cracking and have excellent adhesion.Exhibits very good ageing & weathering resistance Exhibits good storage stability for 48 hours at 150-170°CIf required, it is easily reheated up to the required temperature. It doesn't a�ect the quality in normal conditions. Cost saving compared to currently used materials Easy to handle, with no hard smell during heating and mixing.Locally available in Saudi Arabia and delivered in very short time.Excellent technical support and application or usage guidance, as well as after sales service available to the contractors.

SABIT PMB POLYBILT 101

PROPERTIESP / GRADE

Requirement of the original binder Flash point, (COC), °C >230

<3.0Rotational Viscosity @ 135 °C pa s

<1.0Requirement of RTFO ResideMass Change, maximum %

70Dynamic Shear G*/ sin δ, minimum 1.00KPa, test temperature @10 rad/s, °C

70Requirement of RTFO Reside

Dynamic Sheer G*/sin δ, minimum 2.20KPa, test temperature @10 rad/s, °C

70Requirement of RTFO ResideMSCR Jnr3.2 test temperature, °C≤2.0 KPa-1 (H)

PG70-10

Introduction

SABIT PMB POLYBILT 101 is a polymer modi�ed bitumen formulated from ductile bitumen binder that is modi�ed by the addition of POLYBILT 101 polymer, produced in specialized mixing plant in order to obtain a totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.

Used in hot asphalt mixes manufactured by central plants. General practices as outlined by Ministry of Transport should be following in mixing.

SABIT PMB POLYBILT 101 is to be Stored in the insulated tanks with proper heating and circulation system.Only use trucks without any signi�cant material such as fuel, oil or emulsi�ed bitumen which may a�ect the product.

Coverage

Health & safety

Workers should wear protective masks, gloves and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline.

Precaution

Care should be taken when heating SBIT PMB POLYBILT 101 to avoid overheating.

SABIT PMB ELVALOY

PG82-10PG76-10

230230 230

64MSCR, Jnr di�, ≤75%, test temperature, °C7 ASTM D74056770 82

6 ASTM D74056770 82

ASTM D71756770 82

TEST METHODS

Introduction

SABIT PMB ELVALOY is a polymer modi�ed bitumen consist of the neat bitumen binder that is modi�ed by the addition of ELVALOY polymer, produced in specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.

Used in super-pave mix design for a central plants of hot mix asphalt. General practices as outlined by Ministry of Transport should be following in mixing.

Coverage

SABIT PMB ELVALOY is to be Stored in insulated tanks with proper heating and circulation system.Transportation of SABIT PMB ELVALOY should be done using trucks free from any signi�cant material might a�ect the concentrating of the polymer such as fuel, oil, emulsi�ed bitumen, etc.

ORIGINAL BINDER

Health & safety

Workers should wear protective masks, gloves and goggles during application.

Precaution

Care should be taken when heating SABIT PMB ELVALOY to avoid over heating

SABIT PMB CRUMB RUBBER

PG82-10PG76-10

230230 230

6 ASTM D74056770 82

ASTM D71756770 82

TEST METHODS

Introduction

SABIT PMB CRUMP RUBBER is a polymer modi�ed bitumen consisting of bitumen binder that is modi�ed by the addition of CRUMB RUBBER polymer, produced in specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.

Coverage

SABIT PMB CRUMB RUBBERB is to be Stored in the insulated tanks with proper heating and circulation system.Transportation of SABIT PMB CRUMB RUBBER by using trucks free from any signi�cant material might a�ect the concentrating of the polymer such as fuel, oil, emulsi�ed bitumen, etc.

ORIGINAL BINDER

Health & safety

Precaution

Care should be taken when heating SABIT PMB to avoid over heating

SABIT PMB ELVALOY

PG82-10PG76-10

230230 230

6 ASTM D74056770 82

ASTM D71756770 82

TEST METHODS

Introduction

SABIT PMB ELVALOY is a polymer modi�ed bitumen consist of the neat bitumen binder that is modi�ed by the addition of ELVALOY polymer, produced in specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.

Coverage

SABIT PMB ELVALOY is to be Stored in insulated tanks with proper heating and circulation system.Transportation of SABIT PMB ELVALOY should be done using trucks free from any signi�cant material might a�ect the concentrating of the polymer such as fuel, oil, emulsi�ed bitumen, etc.

ORIGINAL BINDER

Health & safety

Precaution

Care should be taken when heating SABIT PMB ELVALOY to avoid over heating

SABIT PMB CRUMB RUBBER

PG82-10PG76-10

230230 230

6 ASTM D74056770 82

ASTM D71756770 82

TEST METHODS

Introduction

SABIT PMB CRUMP RUBBER is a polymer modi�ed bitumen consisting of bitumen binder that is modi�ed by the addition of CRUMB RUBBER polymer, produced in specialized mixing plants in order to obtain totally consistent and homogenous PMB meeting the requirements of the performance grade of the super-pave system.

Coverage

SABIT PMB CRUMB RUBBERB is to be Stored in the insulated tanks with proper heating and circulation system.Transportation of SABIT PMB CRUMB RUBBER by using trucks free from any signi�cant material might a�ect the concentrating of the polymer such as fuel, oil, emulsi�ed bitumen, etc.

ORIGINAL BINDER

Health & safety

Precaution

Care should be taken when heating SABIT PMB to avoid over heating

SABIT PMB · 2020. 10. 6. · sabit@saudibitumen.com | bitumen@saudibitumen.com SABIT PMB PAVEFLEX...

Documents

PMB General 1853

PMB FIX 2017

Sabit Diskler

PMB Tehnic 1891

Les fonctions OAI-PMH de PMB: moissonner et exposer avec PMB

SABIT/САБИТ Special American Business Internship Training ... · The U.S. Department of Commerce’s Special American Business Internship Training Program (SABIT) has established

78 Sabit Emulsion CSS IH - saudibitumen.com · Emulsion CSS-1 H is safe, non-flamma¬ble, non-toxic and presents no health hazard. In case of contact with eye irrigate with clean

SABIT/САБИТ Special American Business Internship Training ...economy-zt.gov.ua/files/1111/SABIT Dairy Application 2020.pdf · Special American Business Internship Training Program

Golok Bulan Sabit 22

PMB Plastics, Rubber and Cablemaking Training … Documents/PMB...PMB Training Package Companion Volume Implementation Guide Release 1 - June 2016 Page 1 of 62 PMB Plastics, Rubber

Pasaport sabit

Cue Card(Sabit)

GridTalk PMB

Nsk Tek Sira Sabit Bilyali Rulmanlar

SABIT BITUMEN 75/30 BITUMEN... · 2019-01-15 · SABIT BITUMEN 75/30 Introduction: SABIT BITUMEN 75/30 is an oxidized Asphalt produced by oxidizing a selected petroleum asphalts without

PMB General 1855

PMB General 1842

Persatuan Bulan Sabit Merah Kebangsaan

Pp Anemia Sel Sabit

PMB CoMPosite