S P E C I F I C A T I O N S H E E T - Moen · 5-1/2" (132mm) NOMINAL OPTIONAL ESCUTCHEON...

Preview:

Citation preview

1" (25 mm)MAX. DECK THICKNESS

FOR SIDE SPRAY

5-1/2" (132mm)NOMINAL

OPTIONALESCUTCHEON

10-1/4" x 2-3/8" WIDE(261mm x 60mm)

Max DeckThickness

2-9/16”(65mm)

5-1/32"(127mm)

2-1/4"(57mm)

2"(51mm)

9-3/4"(248mm)

6-7/8"(175mm)

7-7/16"(189mm)

handle openposition

1/2" IPS

3/8"

24"(609mm)

The use of aerator part 116711reduces flow to a maximum of1.5 gpm (5.7L/min.)

S P E C I F I C A T I O N S H E E T

CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • (888) 450-5522 • www.cfgonline.com

One Handle Kitchen

Models: 42511 series • 42512 series

42513 series with side spray42514 series with side spray

CFG- 42513 Rev. 11/14

CRITICAL DIMENSIONS(DO NOT SCALE)

DESCRIPTION• Metal construction with various finishes identified by suffix • CA42511 – 1/2" IPS connection • CA42512 – Flexible supplies with 3/8" compression fittings • CA42513 – 1/2" IPS connection with matching finish

side spray • CA42514 – Flexible supplies with 3/8" compression fittings and matching

finish side spray • Six (6) individual boxes per master carton

OPERATION• Pivot action, lever style handle • Temperature control by 90° arc of handle travel • Will operate with less than 5 lbs. of torque • No grasping motion required to operate the faucet handle • Feature red/blue hot/cold temperature indicators

FLOW• Spout flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi • Diverted flow at sidespray limited to 2.0 gpm max (7.6 L/min) at 60 psi

CARTRIDGE • Ceramic disc technology• Non-metallic, non-ferrous, and brass materials • Single body construction for easy replacement

STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1,

and all applicable requirements referenced therein,including NSF61/9

• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal Safe Drinking

Water Act

• ADA for lever handle

WARRANTY – RESIDENTIAL, COMMERCIAL • Ten year limited warranty against defects in materials and manufacturing

workmanship• Refer to the installation instructions enclosed with each CFG product or call

1-888-450-4910 for complete warranty information

NOTE: • CA42513 & CA42514 are designed to install through 2 or

4 holes,1-1/4” (32mm) min. dia. and 4” (102mm) on center• CA42511 & CA42512 are designed to install through 1 or

3 holes, 1-1/4” (32mm) min. dia. and 4” (102mm) on center

There is more than 1 version of this model.Page down to identify the version you have.

S P E C I F I C A T I O N S H E E T

CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • (888) 450-5522 • www.cfgonline.com

Models: CA42511 series • CA42512 series

CA42513 series with side sprayCA42514 series with side spray

One Handle KitchenDESCRIPTION• Metal construction with various finishes identified by suffix • CA42511 – 1/2" IPS connection • CA42512 – Flexible supplies with 3/8" compression fittings • CA42513 – 1/2" IPS connection with matching finish

side spray • CA42514 – Flexible supplies with 3/8" compression fittings and matching

finish side spray • Six (6) individual boxes per master carton

OPERATION• Pivot action, lever style handle • Temperature control by 90° arc of handle travel • Will operate with less than 5 lbs. of torque • No grasping motion required to operate the faucet handle • Feature red/blue hot/cold temperature indicators

FLOW• Spout flow is limited to 2.0 gpm max (7.6 L/min) at 60 psi • Diverted flow at sidespray limited to 2.0 gpm max (7.6 L/min) at 60 psi

CARTRIDGE • Ceramic disc technology• Non-metallic, non-ferrous, and brass materials • Single body construction for easy replacement

STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1, and all applicable

requirements referenced therein, including NSF61/9• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal Safe Drinking

Water Act

• ADA for lever handle

WARRANTY – RESIDENTIAL, COMMERCIAL • Ten year limited warranty against defects in materials and manufacturing

workmanship• Refer to the installation instructions enclosed with each CFG product or call

1-888-450-4910 for complete warranty information

NOTE: • CA42513 & CA42514 are designed to install through 2 or

4 holes,1-1/4” (32mm) min. dia. and 4” (102mm) on center• CA42511 & CA42512 are designed to install through 1 or

3 holes, 1-1/4” (32mm) min. dia. and 4” (102mm) on center

1" (25 mm)MAX. DECK THICKNESS

FOR SIDE SPRAY

5-1/2" (132mm)NOMINAL

OPTIONALESCUTCHEON

10-1/4" x 2-3/8" WIDE(261mm x 60mm)

Max DeckThickness

2-9/16”(65mm)

5-1/32"(127mm)

2-1/4"(57mm)

2"(51mm)

9-3/4"(248mm)

6-7/8"(175mm)

7-7/16"(189mm)

handle openposition

1/2" IPS

3/8"

24"(609mm)

CRITICAL DIMENSIONS(DO NOT SCALE)

CFG- 42513 Rev. 12/13

The use of aerator part 116711reduces flow to a maximum of1.5 gpm (5.7L/min.)

1" (25 mm)MAX. DECK THICKNESS

FOR SIDE SPRAY

5-1/2" (132mm)NOMINAL

OPTIONALESCUTCHEON

10-1/4" x 2-3/8" WIDE(261mm x 60mm)

Max DeckThickness

2-9/16”(65mm)

5-1/32"(127mm)

2-1/4"(57mm)

2"(51mm)

9-3/4"(248mm)

6-7/8"(175mm)

7-7/16"(189mm)

handle openposition

1/2" IPS

3/8"

24"(609mm)

The use of aerator part 116711reduces flow to a maximum of1.5 gpm (5.7L/min.)

S P E C I F I C A T I O N S H E E T

CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • (888) 450-5522 • www.cfgonline.com

One Handle Kitchen

Models: 42511 series • 42512 series

42513 series with side spray42514 series with side spray

CFG- 42513 Rev. 11/14

CRITICAL DIMENSIONS(DO NOT SCALE)

DESCRIPTION• Metal construction with various finishes identified by suffix • CA42511 – 1/2" IPS connection • CA42512 – Flexible supplies with 3/8" compression fittings • CA42513 – 1/2" IPS connection with matching finish

side spray • CA42514 – Flexible supplies with 3/8" compression fittings and matching

finish side spray • Six (6) individual boxes per master carton

OPERATION• Pivot action, lever style handle • Temperature control by 90° arc of handle travel • Will operate with less than 5 lbs. of torque • No grasping motion required to operate the faucet handle • Feature red/blue hot/cold temperature indicators

FLOW• Spout flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi• Diverted flow at sidespray limited to 2.0 gpm max (7.6 L/min) at 60 psi

CARTRIDGE • Ceramic disc technology• Non-metallic, non-ferrous, and brass materials • Single body construction for easy replacement

STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1,

and all applicable requirements referenced therein,including NSF61/9

• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal Safe Drinking

Water Act

• ADA for lever handle

WARRANTY – RESIDENTIAL, COMMERCIAL • Ten year limited warranty against defects in materials and manufacturing

workmanship• Refer to the installation instructions enclosed with each CFG product or call

1-888-450-4910 for complete warranty information

NOTE: • CA42513 & CA42514 are designed to install through 2 or

4 holes,1-1/4” (32mm) min. dia. and 4” (102mm) on center• CA42511 & CA42512 are designed to install through 1 or

3 holes, 1-1/4” (32mm) min. dia. and 4” (102mm) on center

S P E C I F I C A T I O N S H E E T

CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • (888) 450-5522 • www.cfgonline.com

Models: CA42511 series • CA42512 series

CA42513 series with side sprayCA42514 series with side spray

One Handle KitchenDESCRIPTION• Metal construction with various finishes identified by suffix • CA42511 – 1/2" IPS connection • CA42512 – Flexible supplies with 3/8" compression fittings • CA42513 – 1/2" IPS connection with matching finish

side spray • CA42514 – Flexible supplies with 3/8" compression fittings and matching

finish side spray • Six (6) individual boxes per master carton

OPERATION• Pivot action, lever style handle • Temperature control by 90° arc of handle travel • Will operate with less than 5 lbs. of torque • No grasping motion required to operate the faucet handle • Feature red/blue hot/cold temperature indicators

FLOW• Spout flow is limited to 2.0 gpm max (7.6 L/min) at 60 psi • Diverted flow at sidespray limited to 2.0 gpm max (7.6 L/min) at 60 psi

CARTRIDGE • Ceramic disc technology• Non-metallic, non-ferrous, and brass materials • Single body construction for easy replacement

STANDARDS • Third party certified to ASME A112.18.1/CSA B-125.1, and all applicable

requirements referenced therein, including NSF61/9• Contains no more than 0.25% weighted average lead content• Complies with California Proposition 65 and with the Federal Safe Drinking

Water Act

• ADA for lever handle

WARRANTY – RESIDENTIAL, COMMERCIAL • Ten year limited warranty against defects in materials and manufacturing

workmanship• Refer to the installation instructions enclosed with each CFG product or call

1-888-450-4910 for complete warranty information

NOTE: • CA42513 & CA42514 are designed to install through 2 or

4 holes,1-1/4” (32mm) min. dia. and 4” (102mm) on center• CA42511 & CA42512 are designed to install through 1 or

3 holes, 1-1/4” (32mm) min. dia. and 4” (102mm) on center

1" (25 mm)MAX. DECK THICKNESS

FOR SIDE SPRAY

5-1/2" (132mm)NOMINAL

OPTIONALESCUTCHEON

10-1/4" x 2-3/8" WIDE(261mm x 60mm)

Max DeckThickness

2-9/16”(65mm)

5-1/32"(127mm)

2-1/4"(57mm)

2"(51mm)

9-3/4"(248mm)

6-7/8"(175mm)

7-7/16"(189mm)

handle openposition

1/2" IPS

3/8"

24"(609mm)

CRITICAL DIMENSIONS(DO NOT SCALE)

CFG- 42513 Rev. 12/11

The use of aerator part 116711reduces flow to a maximum of1.5 gpm (5.7L/min.)

Recommended