Ryan P. Quilala CV

QUILALA, RYAN PINEDA

Nationality : Filipino

Date of Birth : September 26, 1984

Address : Apt/Blk 43 Holland Drive. #03-51,

Singapore 270043

Email address : quilala_ryanp@yahoo.com

Contact Nos. : (+65)85104187

NRIC/FIN No.: G5155131T

PROFILE:

With enriched experience and knowledge in the field for Mechanical, Piping,

Instrumentation and Electrical work. Have been involved with various QA/QC and

Technical Inspection and Testing of plant construction equipments and materials with

accordance to the project standards and specifications.

JOB EXPERIENCE:

MUN SIONG ENGINEERING LIMITED

Mun Siong Engineering Limited

35 Tuas Road, Singapore 638496

July 16, 2012 – Present

ACTIVITIES:

• Senior QA/QC Supervisor/Lead

• Preparations of documents and presentation for Project Pre-Inspection

Meeting.

• Coordinate and attend weekly meeting with Client’s Project Managers,

Project Engineers and Project Supervisors for progress status of updates.

• Conduct meeting and briefing for the Project requirements and standard

procedure.

• Allocate workloads and schedules to corresponding Project QC Inspectors.

• Review and check construction documents being used at site such as:

Method of Statement, ITP, Work Procedure, etc.

• Coordinate with the Material Engineer all relevant material deliveries such

as acceptance and/or rejections.

• Coordinate with engineering and field operation group for the study of

installation works considering technical aspect and work execution.

• Review, check and verify that works are carried according to the required

quality standard and specifications.

• To undertake QC functions in the workplace for daily QC activities.

• Maintenance QA/QC SUPERVISOR (Piping and Mechanical)

• Ensure that safety practices were followed prior to commencement of

work.

• Review and check construction documents being used at site such as:

Method of Statement, ITP, Work Procedure, etc.

• Coordinate with the Material Engineer all relevant material deliveries such

as acceptance and/or rejections.

• Coordinate with engineering and field operation group for the study of

installation works considering technical aspect and work execution.

• Review, check and verify that works are carried according to the required

quality standard and specifications.

• To undertake QC functions in the workplace for daily QC activities.

• To interface and coordinate with clients QC matters with for all related

inspection activities.

• Prepare and submit relevant report such as but not limited to weekly or

monthly and other report as may be requested by the Project QC Manager.

• Performing and carrying out all standard NDT and Testing requirements.

• Visual inspection and dimensional of completed weld against the

specifications requirements and drawing. Reviewing of hydro test package

and conduct line checking/ punch listing (to ensure that all welds on lines

are completed) prior for hydro testing.

• QCT Engineer for TFA ( TOTAL FLANGE ASSURANCE )

• Ensure proper coordination with the main contractor (SEPL).

� Develop QC measurements model at Bolt-UTG as per given TFA

specification for bolted joints for zone 2-4.

� Support activities of Authorize Foreman and deliver full range of QC

duties at flanges assigned for Bolt-UT measurements by TFA

specification.

� Witness and inspect hydrostatic testing for Vessels, Columns and

Exchangers.

� Take Reference and Final Bolt-UT readings for bolted joints at zone 2-4.

� Accept or Reject joint tightness based on Bolt-UT measurements and

result of visual inspection

� Put a seal on accepted flanges

� Advise Authorize Foreman on failure mitigation actions in case of flange

rejection.

� Report to SEPL Executing Engineer QC progress and all cases of TFA

non-compliance.

� Manage data files and prevent data corruption or losses.

� Cooperate with Tensioning / Hydraulic torquing supervisor (supplied by

TET Alliance) to acquire Reference and Final measurements of stud bolt

loading for all tensioning / Hydraulic torquing job

CWT ENGINEERING PTE. LTD.

47 Jalan Buroh, Singapore 619491

June 10, 2011 – July 14, 2012

ACTIVITIES:

• SUPERVISOR

• Ensure that safety practices were followed prior to commencement of work.

• Supervision in allocation of manpower to ensure the quality of production

for mechanical materials with accordance to the clients standards.

• Material Receiving, Inspections and Measurement of Fabricated Materials.

Pipes, Steel Plates, Beams and Metal profiles prior to Blasting and

Painting.

• Coordination with client QC for the required paint and specification.

• Implementation of inspection standards for Blasting and Painting of Pipes

and Steel Plates.

• Testing of WFT and DFT of painted materials with accordance with the

client standards and specifications.

• MAINTENANCE ENGINEER

• Maintaining the condition of all blasting and painting machine.

• Ensure quick solution and fixed up upon machine breakdown for

continuous production.

QATAR SHELL PEARL - GTL PROJECT

S.E.C / CHIYODA HYUNDAI HEAVY INDUSTRIES

RAS LAFFAN Industrial City, Qatar

December 01, 2009 – December 01,2010 (End of Contract)

ACTIVITIES:

• INSTRUMENT and ELECTRICAL QA/QC INSPECTOR

• Implementation of final installation standards and inspection for Field

Instruments, Stanchions and Cable Trays.

• Installation and Leak Testing of Air / Impulse tubing for various

instruments.

• Insulation resistance and Continuity testing of Control Cables, Power

Cables and Instrument Cables.

• Cable Installation, including Tray, Earthing and Bonding jumper

installation inspection.

• Lighting, Switch, Receptacle, Junction Box cable testing and installation

inspection,

SHARQ 3RD

EXPANSION, ETHYLENE PLANT

AL – RUSHAID CONSTRUCTION Co. Ltd / EEI CORPORATION .ph

Industrial City, Al – Jubail, Kingdom of Saudi Arabia

February 27, 2008 – October 16, 2009 (End of Contract)

ACTIVITIES:

• INSTRUMENT QA/QC INSPECTOR

• Material Receiving / Inspection of Construction, Electrical and Instrument

equipments.

• Calibration of Field Instruments.

• Implementation of the installation standards for Field Instruments,

Instrument Panels, Stanchions, Racks and Cable Trays.

• Installation and Leak Testing of Air / Impulse tubing for various

instruments.

• Insulation resistance and Continuity testing of Control Cables, Power

Cables and Instrument Cables.

• PUNCHLIST LEAD QC / COORDINATOR

• Coordinate the inspections of instruments within a given System /

Subsystem with the client (SHARQ PMT) and main contractor ( Shaw

Stone and Webster PMT ).

• Assisting in the supervision of the Field Operation Group (FOG) to ensure

the rectification and closing of punch lists for the compliance with the

project standards and specifications.

• PIPING QA/QC INSPECTOR

• Ensure that safety practices were followed prior to commencement of

work.

• Review and check construction documents being used at site such as:

Method of Statement, ITP, Work Procedure, etc.

• Coordinate with the Material Engineer all relevant material deliveries such

as acceptance and/or rejections.

• Coordinate with engineering and field operation group for the study of

installation works considering technical aspect and work execution.

• Review, check and verify that works are carried according to the required

quality standard and specifications.

• To undertake QC functions in the workplace for daily QC activities.

• To interface and coordinate with clients QC matters with for all related

inspection activities.

• Prepare and submit relevant report such as but not limited to weekly or

monthly and other report as may be requested by the Project QC Manager.

• Visual inspection and dimensional of completed weld against the

specifications requirements and drawing.

• Reviewing of hydro test package and conduct line checking/ punch listing

(to ensure that all welds on lines are completed) prior for hydro testing.

• INSTRUMENT AND PIPING TURN OVER REVIEWER

• Ensures that all documents and drawings required per loop are attached

and presented.

• Interpretations of Piping and Instrument Drawing ( P&ID ), Instrument

Loop Diagram ( ILD and other relevant drawings to ensure the testing or

inspection required for the instruments per loops to be accomplished and

properly documented.

• Review of Isometric Drawing and other relevant documents to ensure the

testing or inspection required per packages to be accomplished and

properly documented.

JUAYMAH CAMP RESIDENTIAL EXPANSION

AL – RUSHAID CONSTRUCTION Co. Ltd / EEI CORPORATION .ph

Industrial City, Al – Jubail, Kingdom of Saudi Arabia

February 18, 2008 – February 27, 2008

ACTIVITIES:

• ELECTRICAL QA/QC INSPECTOR

• Material Receiving and Inspections of residential cabins, power cables and

equipments.

• Insulation resistance and Continuity testing of electrical cables.

• Installation of electrical panel.

• Cable Installation, including Tray, Earthing and Bonding jumper

installation inspection.

GV – RADIO BROADCASTING NETWORK

Angeles City, Pampanga, Philippines

August – October 2007

ACTIVITIES:

• STATION TECHNICIAN

• Monitor and Ensures the smooth broadcasting of the station’s programs.

• Maintenance of the subscribe radio frequency output and other

communication equipments.

EDUCATIONAL ATTAINMENT:

B.S in Electronics and Communication Engineering - Holy Angel University

Angles City, Pampanga, Phil.

AWARDS / CITATIONS:

Top Performer (Best QC for 2014) - AWARDEE

Mun Siong Engineering Ltd.

Shell Bukom

Top Performer (Best QC for 2013) - AWARDEE

Mun Siong Engineering Ltd.

Shell Bukom

CERTIFICATE for EXCELLENCES - AWARDEE

SHARQ 3RD

EXPANSION PROJECT

Al-Jubail, Kingdom of Saudi Arabia

Institute of Electronics and Communication Engineers - MEMBER

National Chapter, Philippines

Holy Angel University - PESO SCHOLAR

Angeles City, Philippines

Republic Central Colleges - MODEL STUDENT

Angeles City, Philippines

Special Science High School - SCHOLAR

Angeles City, Philippines

SEMINARS / SPECIAL COURSES:

� PT Level II (CUTECH Quality Solutions PTE. LTD.)

� WORKING AT HEIGHT COURSE FOR SUPERVISORS (K2S Safety

Consultancy PTE LTD)

� ASME SEC VII DIV 1 (ABS Consulting)

� RI Level II (CUTECH Quality Solutions PTE. LTD.)

� Pre-commissioning induction (PEARL – GTL Project)

� Total Quality Management ( ISO 9001 AWARNESS )

� Pre-Commissioning Training and Seminar (SHARQ 3rd

EXPANSION)

� H2S Safety Evacuation Seminar (SHARQ 3rd

EXPANSION)

� Power Cables (PHELPS DODGE Phils. ENERGY PRODUCTS) SYSTEM SOFTWARES, CODES and STANDARDS:

� ASME Standards

� SABIC Standards

� ARAMCO Standards

� Microsoft Windows Office

� Cisco Networking

� Autocad