RE Nemek 1114 TS EN dEd dE sIgN Nemek 1114 TS Terrain rig...EN d E d dE s I g N Nemek 1114 TS...

Nemek 1114 TS Terrain rig

Nemek 1114 TS Technical data

Strong and powerful rig for difficult terrain and drilling at all angles. For water wells, horizontal holes, anchors and foundations. Suitable for deep holes and larger diameters.

Qmatec Drilling

Verkstadvegen 12, 3890 VINJE

t +47 35063400

e mail@qmatecdrilling.no

w wwwqmatecdrilling.no

quality inmanagementand technology

7100

2400

1400 500

2500

3000 1650

2750

From the very first Nemek produced rig in 1966, our rigs have been developed and improved in close collaboration with visionary customers. Our employees have long experience and are proud of their profession. Our service people are available where you are, 24-hours a day. This ensures quality throughout the entire process and helps you to be profitable every day – year after year.

ENGINE

Diesel engine Deutz TCD 2013 06L

Power 170 kW

Hydraulic pumps: 125 ccm/r, rotation

145 ccm/r main block

75 ccm/r service blocks

Tractive power 12800 kg

Shoe width 500 mm

Weight ready to run 13000-15000 kg

(dependent on equipment)

Weight std. type from ca. 12500 kg (dry)

FEEDER

Feed length 4000 mm

Feed force 6000 kg

Pull up 14 000 kg

Mast winch 800 kg

Drill table Ø 420 mm

Feed extension 1 000 mm

Rapid feed 0,77 m/sec

Rapid pull up 0,58 m/sec

Jaw cylinder Ø 80 mm

ROTATION UNIT

Torque 5200/10400 Nm

Rotation speed 0-125/0-62 opm

Spinde thread API 2 7/8”IF- API2 3/8” REG

Electronic weight balance

OTHER

Pipe rack capacity 72 pc. Ø76 / 50 pc. Ø89

Oscillation +20/-15 gr

Track speed 3,1/4,6 km/h

El. system 24 V. DC

Battery 2 x 55 Ah dry

Hydr. tank 430 l

Diesel tank 360 l

OPTIONAL EXTRA EQUIPMENT

Main winch 6000 kg.

Ilmeg vacuum cleaner with pre-separator

Different types of welders

Different types of water pumps and reservoars

Different types of diverting housing

Extra pipe rack

Crane

Other equipment will be delivered according to agreement

RE

co

mm

EN

dE

d d

Es

IgN

Nemek 1114 TS Terrain rig

•Trackoscillationwithhydrostaticbalancemakesimpressiveterrainqualities.

•Steeltracksarestandard,rubbertracksareoptional.

•Flexibledrillingmast.Canbepositionedatallanglestohorizontalholes.

•Hydraulictophammerforoverburdenandrockdrillingaredeliveredasanoption.

•Remotecontrolwithbackup-cableor hydraulic pilot pressured manoeuvring system is optional.

•TherigcanbepreparedfromthefactoryforReverseCirculation/RC or water driven hammer.

•Injectionpumpforwaterorfoamareassembledasrequired.

•Otheradditionalequipmentsuchascurrentandweldingunit,vacuumcleaner,winch, water tank, extra pipe rack, different dust hoods are delivered if required.

Nemek Rig Solution gives you:

• Time-saving start up and removal

• Easy to operate

• Easy to maintain

• Long life

• Service when you need it

• Wide range of use