“Properties of Concrete” Introduction. Overview What is concrete made of? What Is Concrete Used...

““Properties of Concrete”Properties of Concrete”

IntroductionIntroduction

““Properties of Concrete”Properties of Concrete”

IntroductionIntroduction

Overview• What is concrete made of?

• What Is Concrete Used For?

• Why Is Concrete Used?

• Why Do We Reinforce Concrete?

• Curing of concrete

What is concrete made of?What is concrete made of?What is concrete made of?What is concrete made of?

What is concrete made of?

• Concrete is basically a mixture of two components:– Paste – Aggregates

• Paste (Portland cement, water, and air) • Aggregates (sand, gravel, crushed

stone)

CEMENT• Cement (Dry powder of very fine particles) is a

building material made by grinding calcined

limestone and clay into a fine powder• Portland Cement chemical composition

– Limestone, shale and clay• CaO (lime)

• Al2O3 (Alumina)

• SO3 (Sulfite)

CEMENT

• When mixed with water, forms a paste• it undergoes chemical changes

(chemical reaction-Hydration)• Glue paste coats all the aggregates

together• hardens and forms a solid mass

WATER

• Water good for drinking is good for

concrete……

WATER• needed for two purposes:

– chemical reaction with cement– workability

• only 1/3 of the water is needed for chemical reaction

• extra water remains in pores and holes• results in porosity• Good for preventing plastic shrinkage

cracking and workability• Bad for permeability, strength,

durability.

AGGREGATES

• cheap fillers• hard material• provide for volume stability• reduce volume changes• provide abrasion resistance

AGGREGATE• Aggregate are divided into two groups:

– Fine - AASHTO M-6 or ASTM C-33 – Coarse - AASHTO M-80 or ASTM C-33

• Fine aggregate consist of natural or manufactured sand with particle size up to 3/8 inch

• Coarse aggregate particles are retained on the #4 sieve and range up to 6 inches

COARSE AGGREGATE

FINE AGGREGATE

CONSTITUENTS

• paste 25 to 40%– portland cement 7% to 15% by Vol.– water 14% to 21% by Vol.

• Aggregates 60% to 75%– coarse aggregates– Fine aggregates

• Admixtures

CONSTITUENTSCement Water Air Fine Aggregate Coarse Aggregate

Cement paste constitutes about 25% to 40% volume of concrete

AIR ENTRAINED CONCRETE

• Why the difference between line #1 and line #2?

• Line 1, small size CA, increased H2O and cement

• Line 2, larger CA, less H20, air, cement

NON-AIR ENTRAINED CONCRETE

• Similar to Air Entrained Concrete slide• See how aggregate size impacts water

demand and amount of “paste” in the mix

Cement Water Air Fine Aggregate Coarse Aggregate

ADMIXTURES

• increase set time• decrease set time• increase workability• adjust other

concrete properties

• reduce water demand

• entrain air• inhibit corrosion

•Plastic and hardened properties of concrete may be changed by adding admixtures•Admixtures are commonly used to:

ADMIXTURES• chemical

– retarders– accelerators– water reducing– air entraining

• mineral– fly ash– silica fume– slags

QUALITY OF CONCRETE• Quality of concrete

depends on quality of paste and quality of aggregates

• each particle of aggregate is completely coated with paste

• All spaces between aggregate is filled with paste

QUALITY OF CONCRETEIs determined by:• W/C Ratio – • Advantage of reducing water

– Increased compressive and flexural strength– lower permeability– increased resistance to weathering– reduced shrinkage cracking tendencies

• The less water used, the better quality of concrete, provided it can be consolidated properly.

Ten cement-paste cylinders with water-cementratios from 0.25 to 0.70. The band indicates that eachcylinder contains the same amount of cement. Increasedwater dilutes the effect of the cement paste, increasingvolume, reducing density, and lowering strength.

FORMS

• A form is the mold for setting concrete into a desired shape

What Is Concrete Used What Is Concrete Used For?For?

What Is Concrete Used What Is Concrete Used For?For?

What Is Concrete Used For?

• Construction Material

Art Work

Picture of Bench

Why Is Concrete Used?Why Is Concrete Used?Why Is Concrete Used?Why Is Concrete Used?

Why Is Concrete Used?

• Economics– Inexpensive, readily available

• Material Properties– Long Lasting– Molded into a desired shape– Great insulator– Hard

Material Properties (cont.)

• Great Compressive Strength (up to 8000 psi and even more than that)

• Poor Tensile Strength (almost 0)– Reinforcement methods ($)

Why Do We Reinforce Why Do We Reinforce Concrete?Concrete?

Why Do We Reinforce Why Do We Reinforce Concrete?Concrete?

Why Do We Reinforce Concrete?

• Prevent cracking due to tension forces

Question

• What is the difference between tension and compression?

Question

• Why would concrete never be used in tension?

How Do We Reinforce Concrete?

• Steel rebar– Excellent in tension, poor in

compression

CURING OF CONCRETECURING OF CONCRETECURING OF CONCRETECURING OF CONCRETE

CURING OF CONCRETE

• Over time concrete will cure, which is a

hardening process.

• Concrete has a 28 day curing time, this

is the amount of time it takes to be

considered completely cured

• Critical to durable concrete• Increases strength• Decreases permeability• Increases durability

Curing

Curing Concrete• How concrete is cured:

– Ponding or Immersion– Spraying or Fogging– Wet Coverings– Impervious Paper– Plastic Sheets– Membrane-Forming Curing

Compounds

Questions?

• Remember:– Use Common Sense– Temperature

effects on your body have very similar effects on concrete

– If you are not sure, ASK!!!