View
241
Download
5
Category
Preview:
Citation preview
prestoThermoplasticTubing
Catalogue 5210-UKSeptember 2001
Thermoplastic TubingTable of Contents
Catalogue 5210-UK2
Thermoplastic Tubing
presto single tubes and tube bundles .................................................................................3
presto polyurethane tubes – Single tubes ...........................................................................4
presto polyurethane tubes – Twin-line tubes .......................................................................5
presto polyamide tubes – Single tubes ...............................................................................6
presto polyethylene tubes – Single tubes ...........................................................................7
Available types and colours....................................................................................................8
Single line tubing PVC sheathed ...........................................................................................9
Tube bundles ........................................................................................................................10
Tube bundles – Technical details and packaging information ..............................................10
Plastic tube cutter and dismantling tool ................................................................................11
Plastic tube cutter .................................................................................................................11
FEP, PFA, TFE tubing ...........................................................................................................12
prestoweld 2 tubing – weld spark resistant ....................................................................13
Index of Part Numbers ..........................................................................................................14
Catalogue 5210-UK3
Thermoplastic TubingSingle tubes and tube bundles
presto single tubes and tube bundles
All presto tubing in metric and imperial dimensionsis TÜV and MUC-KSP-A 039 A III tested andmanufactured to international standards.The prestolok push in fitting rangeis also TÜV tested for outside tube dimensions.
presto tubing is manufactured to be fully compatiblewith Parkers wide range of compression, push-in &screw type fittings. Refer toPneumatic connectors handbook 0093-GB andcatalogue 4660-World Standard for TrueSeal™ andFast & Tite® products.
Standard Packaging of all presto tube productsis polyethylene bags. Dispensing cardboard boxes(K) are available on request.
The presto polyurethane tubing features excellent flexibility and kink resistance. In combination with the widerange of Parker fittings it provides the optimum solution for pressurised air applications.Working pressures shown are based on a design factor of 3:1.presto Tubing is not approved for food applications.
prestopresto
presto
presto
Catalogue 5210-UK4
Thermoplastic TubingPolyurethane tubes
presto polyurethane tubes (52 Shore D)– Single tubes –
Polyurethane single tubetolerances in mm
Tube O.D. 3 to 8 mm± 0,1
Tube O.D. 10 to 16 mm± 0,15
Polyurethane (TPU) metric single tubes with O.D. within the limits of CETOP RP 54P
For Prestolok push-in fittings (TÜV tested).
Polyurethane (TPU) single tubes (imperial)
For Prestolok push-in fittings (TÜV tested).
Part No.PU metric
Tube size Maximum working pressure MPaMinimum
bend radiusmm
Weightg/m
3.04.06.08.0
10.012.016.0
2.02.54.05.57.08.0
11.0
1.21.41.21.11.01.21.1
0.91.10.90.90.80.90.9
0.80.90.80.70.70.80.7
13172737546288
59
20315078
131
TPU 3 x 0.5TPU 4 x 0.75TPU 6 x 1TPU 8 x 1.25TPU 10 x 1.5TPU 12 x 2TPU 16 x 2.5
O.Dmm
I.D.mm
-35 ˚Cto
+23 ˚C
-35 ˚Cto
+40 ˚C
-35 ˚Cto
+60 ˚C
1/85/323/16
1/45/16
3/81/2
3.24.04.86.47.99.5
12.7
0.0890.1020.1140.1580.2240.2560.343
2.32.62.94.05.76.58.7
1.01.21.41.31.01.11.1
0.81.01.21.10.80.90.9
0.70.81.00.90.70.80.7
0.5200.6690.7870.8661.4571.7322.560
59
1323304984
TPU 1/8TPU 5/32TPU 3/16TPU 1/4TPU 5/16TPU 3/8TPU 1/2
-35 ˚Cto
+23 ˚C
-35 ˚Cto
+40 ˚C
-35 ˚Cto
+60 ˚C
Part No.PU inch
Tube size Maximum working pressure MPaMinimum
bend radiusinch
Weightg/m
O.Dinch mm
I.D.inch mm
Working pressures shown are based on a design factor of 3:1.Temperature range: -35 °C up to +80 °C
Colour codes:
Natural1
Red2
Blue3
Green4
Black5
Brown6
Yellow7
Orange8
Gray9
Purple10
Pink11
White12
Catalogue 5210-UK5
Thermoplastic TubingPolyurethane tubes – Twin-line tubes
presto polyurethane Tubes– Twin-line tubes –Two tubes are permanently joined to make a pair. For assembly, the tube pair is separated at either end to therequired length. Additional multi-line tubes are available on request.
Working pressures shown are based on a design factor of 3:1.Temperature range: -35 °C up to +80 °C
Polyurethane (TPU) metric twin-line tubes with O.D. within the limits of CETOP RP 54P
For Prestolok push-in fittings (TÜV tested).
Ordering keys for single and multi-line tubesExamples:
4.06.08.0
10.0
2.54.05.57.0
1.01.01.01.0
0.90.90.90.9
0.70.70.70.7
17273754
18386098
TPU 4 x 0.75DTPU 6 x 1DTPU 8 x 1.25DTPU 10 x 1.5D
-35 ˚Cto
+23 ˚C
-35 ˚Cto
+40 ˚C
-35 ˚Cto
+60 ˚C
Part No.PU metric
Tube size Maximum working pressure MPaMinimum
bend radiusmm
Weightg/m
O.Dmm
I.D.mm
Metric tubeMulti-line tube
Tubes in inch
Cardboard Packaging
Cardboard packaging
Length in m Length in mLength in m
Colour: black Colour: blueColour combination: black/blue
Twin-line codePart No. Part No. Part No.
TPU6X1/5-25K TPU4X0,75D/5/3-100KTPU1/8"/3-100
Colour codes:
Natural1
Red2
Blue3
Green4
Black5
Brown6
Yellow7
Orange8
Gray9
Purple10
Pink11
White12
Catalogue 5210-UK6
presto polyamide tubes– Single tubes –
Polyamide tubing is extruded in polyamide PA12. This heat & light stabilised material meets or exceeds the DIN73378, BS5409 PT 1 and the CETOP RP54P requirements.DIN 74 324 tubing available on request (for airbrake applications).
Working pressures shown are based on a design factor of 3:1.Temperature range: -40 °C up to +100 °C (acc. DIN 74324)
*1 MPa = 10 bar
Polyamide single tubetolerances in mm
Tube O.D. 3 to 5 mm+ 0,05 / - 0,08
Tube O.D. 6 to 16 mm+ 0,05 / - 0,10
Part No.Tube O.D.
xwall thickness
Minimumbend radius
mmWeight
g/m
N3X0.60N4X0.65N4X1N5X1N6X1N8X1N8X1.25N10X1N10X1.25N10X1.5N12X1N12X1.5N12X1.75N14X1.5N16X1.5N16X2N22X2.5
2X022N2X025N3X025N4X030N4X040N5X031N6X055N6X062N8X062N10X062N12X078N
3 x 0.60 mm 4 x 0.65 mm
4 x 1 mm 5 x 1 mm 6 x 1 mm 8 x 1 mm
8 x 1.25 mm10 x 1 mm
10 x 1.25 mm10 x 1.5 mm
12 x 1 mm12 x 1.5 mm
12 x 1.75 mm14 x 1.5 mm16 x 1.5 mm
16 x 2 mm22 x 2.5 mm
1/8 x .022 in 1/8 x .025 in3/16 x .025 in 1/4 x .030 in 1/4 x .040 in5/16 x .031 in 3/8 x .055 in 3/8 x .062 in 1/2 x .062 in 5/8 x .062 in 3/4 x .078 in
15 30 20 30 30 40 35 60 60 60 85 60 60 75105 95125
20 20 35 45 30 40 60 60 75100120
5 7 10 13 16 23 28 29 36 42 36 51 59 61 71 91159
8 8 18 32 32 51 73 72130204293
Maximum working pressure MPa
3.32.64.43.32.71.92.51.51.92.41.21.92.31.61.41.91.7
2.51.93.32.52.01.41.81.11.41.70.91.41.71.21.01.41.3
1.91.52.51.91.51.11.40.81.11.30.71.11.30.90.81.11.0
-40 ˚Cto
+23 ˚C
-40 ˚Cto
+40 ˚C
-40 ˚Cto
+60 ˚C
2.83.32.11.82.51.52.32.61.91.51.5
2.12.51.51.31.91.11.72.01.41.11.1
1.61.91.21.01.40.81.31.51.10.80.9
3.2 x 0.56 mm3.2 x 0.64 mm4.8 x 0.64 mm6.4 x 0.76 mm6.4 x 1.02 mm7.9 x 0.79 mm9.5 x 1.40 mm9.5 x 1.57 mm
12.7 x 1.57 mm15.9 x 1.57 mm19.0 x 1.98 mm
Polyamide (PA) metric single tubes
Polyamide (PA) single tubes (imperial)
Thermoplastic TubingPolyamide tubes – Single tubes
Catalogue 5210-UK7
Thermoplastic TubingPolyethylene tubes – Single tubes
presto soft polyethylene tubing is manufactured to ASTM D-1248, type 1, E5 to achieve maximum environmentalstress cracking resistance.
*1 MPa = 10 bar
presto polyethylene tubes– Single tubes –
Polyethylene single tubetolerances in mm
Tube O.D. 3 to 5 mm+ 0,05 / - 0,08
Tube O.D. 6 to 16 mm+ 0,05 / - 0,10
Polyethylene (PE) metric single tubes
Polyethylene (PE) single tubes (imperial)
L4X1L6X1L8X1L10X1L12X2L16X2
4 x 1 mm 6 x 1 mm 8 x 1 mm10 x 1 mm12 x 2 mm16 x 2 mm
253555857590
9 15 21 27 47 84
2X022L4X040L6X062L8X062L8X080L10X080L
1/8 x .022 in1/4 x .040 in3/8 x .062 in1/2 x .062 in1/2 x .080 in5/8 x .080 in
3.2 x 0.56 mm6.4 x 1.02 mm9.5 x 1.57 mm
12.7 x 1.57 mm12.7 x 2.03 mm15.9 x 2.03 mm
203060757590
7 29 66119117185
Part No.Tube O.D.
xwall thickness
Minimumbend radius
mmWeight
g/m
Maximum working pressure MPa
2.141.310.930.721.240.97
1.600.980.700.540.930.72
1.070.660.470.360.620.48
0 ˚Cto
+23 ˚C
0 ˚Cto
+40 ˚C
0 ˚Cto
+60 ˚C
1.381.241.310.971.210.97
1.030.930.980.720.910.72
0.690.620.660.480.600.48
Ordering key
Cardboard packaging
Length in m
Colour: black
Wall thickness in mm
O.D. in mm
Polyamide
Length in m
Polyethylene
Colour: natural
Wall thickness in inch
O.D. in inch
N6X1/5-25K 2X022L/1-100Examples:
Working pressures shown are based on a design factor of 3:1.Temperature range: -30 °C up to +60 °C
Colour codes:
Natural1
Red2
Blue3
Green4
Black5
Brown6
Yellow7
Orange8
Gray9
Purple10
Pink11
White12
Correction factors for workingpressures at lower temperatures
-30 ˚C to -20 ˚C:0.7
-20 ˚C to 0 ˚C:0.8
Catalogue 5210-UK8
Thermoplastic TubingAvailable types and colours
Colour codes:
Natural1
Red2
Blue3
Green4
Black5
Brown6
Yellow7
Orange8
Gray9
Purple10
Pink11
White12
Available types and coloursN
atu
ral
Red
Blu
eG
reen
Bla
ckB
row
nYe
llow
Ora
ng
eG
rey
Pu
rple
Pin
kW
hit
eS
ilver
TPU3X0,5TPU4X0,75TPU6X1TPU8X1,25TPU10X1,5TPU12X2TPU16X2,5
TPU1/8"TPU5/32"TPU3/16"TPU1/4"TPU5/16"TPU3/8"TPU1/2"
TPU4X0,75DTPU6X1DTPU8X1,25DTPU10X1,5D
Part No. Nat
ura
lR
edB
lue
Gre
enB
lack
Bro
wn
Yello
wO
ran
ge
Gre
yP
urp
leP
ink
Wh
ite
Silv
er
Part No.
N3x0.60N4x0.65N4x1N5x1N6x1N8x1N8x1.25N10x1N10x1.25N10x1.5N12x1N12x1.5N12x1.75N14x1.5N16x1.5N16x2N22x2.5
2x022N2x025N3x025N4x030N4x040N5x031N6x055N6x062N8x062N10x062N12x078N
L4x1L6x1L8x1L10x1L12x2L16x2
2x022L4x040L6x062L8x062L8x080L10x080L
Items marked by a dot are standard products.
For non standard items minimum order quantities areapplicable.
Catalogue 5210-UK9
Thermoplastic TubingTube bundles
Tube bundlesfor maximum safety and minimum installation work
Helically wound inner tubesfor maximum flexibility.
PVC sheath for protectionagainst damage.
Colour coded inner tubesfor easier identification.
Polyester ribbon to ensurea smooth outer cover.
Parker tube bundles are a high-quality thermoplastic product designed specifically for process control andmonitoring applications.
Parker tube bundles are excellent for use in hydraulic and pneumatic systems.
The PVC coat protects the product against mechanical and chemical damage.
The combination of different tube materials in a Parker tube bundle allows their application in almost all industrialareas.
Each tube can be easily and quickly identified by its colour and position within the helically wound bundle. Thesingle tubes are marked in intervals of max. 500 mm as standard.
In addition to the standard range (STS), extra thick sheath (ETS), and steel wire armour (SWA) constructions arealso available.
Standard configurations are available in lengths of max. 1000 m.
1 3 5 7 12 19
Single line tubing PVC sheathed
For applications where the tubing requires additional protection from abrasion or the environment.
The standard product has a natural coloured core tube with a black PVC sheath. Other colour combinations areavailable on request.
Catalogue 5210-UK10
Thermoplastic TubingTechnical details
Technical details and packaging information
1.01.01.01.01.01.01.01.01.0
2.02.02.0
2.02.02.5
2.02.02.5
2.02.02.5
2.5
6.08.0
10.010.012.012.014.014.016.0
13.017.022.0
15.020.027.0
16.022.029.0
21.029.038.0
35.0
203040356060856075
6590
105
75105135
80115150
105150185
180
3.14.96.67.18.08.99.8
11.313.3
13.019.025.0
16.026.041.0
19.032.048.0
27.048.070.0
72.0
400 x 80500 x 80700 x 80700 x 80700 x 80700 x 80
700 x 150700 x 150700 x 150
700 x 150700 x 150850 x 280
700 x 150800 x 280950 x 300
700 x 150850 x 280950 x 320
850 x 2801000 x 3001100 x 320
1100 x 320
100100100100100100100100100
100100100
100100100
100100100
100100100
100
P01N4X0.65STSP01N6X1STSP01N8X1STSP01N8X1.25STSP01N10X1STSP01N10X1.25STSP01N12X1STSP01N12X1.5STSP01N14X1.5STS
P03N4X0.65STSP03N6X1STSP03N8X1STS
P05N4X0.65STSP05N6X1STSP05N8X1STS
P07N4X0.65STSP07N6X1STSP07N8X1STS
P12N4X0.65STSP12N6X1STSP12N8X1STS
P19N6X1STS
Min.Bend
RadiusmmConfiguration
Weightkg/100mPart No.
100m CoilDimensionsDia x Width
mm
StandardLength
m
Thicknessof
Sheathmm
NominalO.D.mm
Catalogue 5210-UK11
Dismantling toolfor single line tubing PVC sheathed
The HEXACUT tool provides a safe and clean cut avoiding anydamages to the Polyamide inner core tube. A solid casing andquick and easy handling makes it an efficient tool.
P01N4x0.65STSP01N14x1.5STSP01N6x1STSP01N8x1STSP01N8x1.25STSP01N10x1.25STSP01N12x1STSP01N12x1.25STS
HEXACUT14/4
HEXACUT8/6
HEXACUT12/10
Part No.PU metric
RelatedPrestoweld tube
Thermoplastic TubingPlastic tube cutter and dismantling tool
Plastic tube cutter
An easy to handle razor/edged tube cutter, closes automatically,assuring clean and square cuts.May be used with polyethylene, polypropylene, nylon and otherplastic tubing.
How to use:Insert plastic tube to desired length, allow the tube cutter to close,then apply pressure until tube snaps off.Replacement blades: PTC-001-RB
Part Number: PTC
Catalogue 5210-UK12
Thermoplastic TubingFEP, PFA, TFE tubing
FEP 4 x 1FEP 6 x 1FEP 8 x 1FEP 10 x 1FEP 12 x 1
4 x 1 6 x 1 8 x 110 x 112 x 1
2030406085
20.033.346.659.973.3
Part No.Tube O.D.
xwall thickness
in mm
Maximumworking pressure in
MPa psiat +23˚C
Minimumbend radius
mmWeight
g/m
2.71.61.10.90.7
390230160130100
PFA 4 x 1PFA 6 x 1PFA 8 x 1PFA 10 x 1PFA 12 x 1
4 x 1 6 x 1 8 x 110 x 112 x 1
2030406085
20.033.346.659.973.3
Part No.Tube O.D.
xwall thickness
in mm
Maximumworking pressure in
MPa psiat +23˚C
Minimumbend radius
mmWeight
g/m
2.71.61.10.90.7
390230160130100
TFE 4 x 1TFE 6 x 1TFE 8 x 1TFE 10 x 1TFE 12 x 1
4 x 1 6 x 1 8 x 110 x 112 x 1
2030406085
20.534.247.861.575.2
Part No.Tube O.D.
xwall thickness
in mm
Maximumworking pressure in
MPa psiat +23˚C
Minimumbend radius
mmWeight
g/m
2.71.61.10.90.7
390230160130100
FEP, PFA and TFE tubing
FEP tubing
PFA tubing
TFE tubing
Safety factor: 3:1
Standard length: 100 m
Correction factors for working pressures at higher temperatures
Temperature ˚C Correction factor
5075
100150200250
0.870.770.680.530.390.28
Temperature range: -200 °C up to +200 °C
Temperature range: -200 °C up to +260 °C
Temperature range: -200 °C up to +260 °C
Catalogue 5210-UK13
Thermoplastic TubingPrestoweld 2 tubing
prestoweld 2 Polyurethane tubes – weld spark resistantprestoweld 2 tubing is made of weld spark resistant Polyurethane and therefore the ideal solution for water andair supply of welding robots. prestoweld 2 guarantees a simple, fast and reliable assembly without additionaltools.
Part number Max. WorkingPressure at 23 ˚CMPa psi
InsideDiameter
mm
2.04.05.04.06.08.0
10.0
OutsideDiameter
mm
4.06.08.08.0
10.012.014.0
2.81.61.92.82.11.61.6
406232276406305232232
Min. BurstPressure
MPa psi
8.45.05.88.46.35.04.2
1,218725841
1,218914725609
Min. BendRadius
mm
8151616213047
Weightg/m
12.020.038.947.963.979.995.8
PWPU 4x1PWPU 6x1PWPU 8x1,5PWPU 8x2PWPU 10x2PWPU 12x2PWPU 14x2
For prestoweld 2 push-in fittings refer to Pneumatic connectors handbook 0093-GB
Correction factors for burst and working pressures at higher temperatures
Temperature ˚C Correction factor
–30 to +23+40+60+80+90
1.000.770.560.460.42
Catalogue 5210-UK14
Thermoplastic TubingIndex of Part Numbers
Index of Part Numbers
TPU 3 x 0.5 ...................... 4TPU 4 x 0.75 .................... 4TPU 6 x 1 ......................... 4TPU 8 x 1.25 .................... 4TPU 10 x 1.5 .................... 4TPU 12 x 2 ....................... 4TPU 16 x 2.5 .................... 4TPU 1/8 ............................ 4TPU 5/32 .......................... 4TPU 3/16 .......................... 4TPU 1/4 ............................ 4TPU 5/16 .......................... 4TPU 3/8 ............................ 4TPU 1/2 ............................ 4TPU 4 x 0.75D ................. 5TPU 6 x 1D ...................... 5TPU 8 x 1.25D ................. 5TPU 10 x 1.5D ................. 5N3X0.60 ........................... 6N4X0.65 ........................... 6N4X1 ................................ 6N5X1 ................................ 6N6X1 ................................ 6N8X1 ................................ 6N8X1.25 ........................... 6N10X1 .............................. 6N10X1.25 ......................... 6N10X1.5 ........................... 6N12X1 .............................. 6N12X1.5 ........................... 6N12X1.75 ......................... 6N14X1.5 ........................... 6N16X1.5 ........................... 6N16X2 .............................. 6N22X2.5 ........................... 62X022N ............................ 62X025N ............................ 63X025N ............................ 64X030N ............................ 64X040N ............................ 65X031N ............................ 66X055N ............................ 66X062N ............................ 68X062N ............................ 610X062N .......................... 612X078N .......................... 6L4X1 ................................. 7L6X1 ................................. 7L8X1 ................................. 7L10X1 ............................... 7L12X2 ............................... 7L16X2 ............................... 72X022L............................. 74X040L............................. 7
Part No. Page
6X062L ............................. 78X062L ............................. 78X080L ............................. 710X080L ........................... 7P01N4X0.65STS............ 10P01N6X1STS ................. 10P01N8X1STS ................. 10P01N8X1.25STS............ 10P01N10X1STS............... 10P01N10X1.25STS.......... 10P01N12X1STS............... 10P01N12X1.5STS ............ 10P01N14X1.5STS ............ 10P03N4X0.65STS............ 10P03N6X1STS ................. 10P03N8X1STS ................. 10P05N4X0.65STS............ 10P05N6X1STS ................. 10P05N8X1STS ................. 10P07N4X0.65STS............ 10P07N6X1STS ................. 10P07N8X1STS ................. 10P12N4X0.65STS............ 10P12N6X1STS ................. 10P12N8X1STS ................. 10P19N6X1STS ................. 10HEXACUT14/4 ............... 11HEXACUT8/6 ................. 11HEXACUT12/10 ............. 11FEP 4 x 1 ....................... 12FEP 6 x 1 ....................... 12FEP 8 x 1 ....................... 12FEP 10 x 1 ..................... 12FEP 12 x 1 ..................... 12PFA 4 x 1 ........................ 12PFA 6 x 1 ........................ 12PFA 8 x 1 ........................ 12PFA 10 x 1 ...................... 12PFA 12 x 1 ...................... 12TFE 4 x 1 ....................... 12TFE 6 x 1 ....................... 12TFE 8 x 1 ....................... 12TFE 10 x 1 ..................... 12TFE 12 x 1 ..................... 12PWPU 4x1 ..................... 13PWPU 6x1 ..................... 13PWPU 8x1,5 .................. 13PWPU 8x2 ..................... 13PWPU 10x2 ................... 13PWPU 12x2 ................... 13PWPU 14x2 ................... 13
Part No. Page Part No. Page Part No. Page
Parker Hannifin Corporation
About Parker Hannifin CorporationParker Hannifin is a leading global motion-controlcompany dedicated to delivering premier customerservice.A Fortune 500 corporation listed on the New York StockExchange (PH), our components and systems compriseover 1,400 product lines that control motion in some 1,000industrial and aerospace markets.Parker is the only manufacturer to offer its customers achoice of hydraulic, pneumatic, and electromechanicalmotion-control solutions. Our Company has the largestdistribution network in its field, with over 7,500 distributorsserving more than 350,000 customers worldwide.
Parker’s CharterTo be a leading worldwide manufacturer of components andsystems for the builders and users of durable goods.More specifically, we will design, market and manufactureproducts controlling motion, flow and pressure. We willachieve profitable growth through premier customer service.
Product InformationCustomers seeking product information, the location of a nearbydistributor, or repair services will receive prompt attention bycalling the Parker Product Information Centre.The Centre can be called toll free from France, Germany,Austria, Switzerland or the United Kingdom. You will beanswered by a Parker employee in your own language.Call Freephone: 00800-2727-5374 (00800 C PARKER H)
The Aerospace Groupis a leader in the development,design, manufacture andservicing of control systems andcomponents for aerospace andrelated high-technology markets,while achieving growth throughpremier customer service.
The FluidConnectors Groupdesigns, manufactures andmarkets rigid and flexibleconnectors, and associatedproducts used in pneumaticand fluid systems.
The Hydraulics Groupdesigns, produces andmarkets a full spectrum of hy-draulic components and sys-tems to builders and users ofindustrial and mobilemachinery and equipment.
The Automation Groupis a leading supplier of pneu-matic and electromechanicalcomponents and systems toautomation customers world-wide.
The Climate & IndustrialControls Groupdesigns, manufactures andmarkets system-control andfluid-handling components andsystems to refrigeration,air-conditioning and industrialcustomers worldwide.
The Seal Groupdesigns, manufactures anddistributes industrial and com-mercial sealing devices andrelated products by providingsuperior quality and totalcustomer satisfaction.
The Filtration Groupdesigns, manufactures andmarkets quality filtration andclarification products,providing customers with thebest value, quality, technicalsupport, and global availability.
The InstrumentationGroupis a global leader in the design,manufacture and distribution ofhigh-quality critical flow com-ponents for worldwide processinstrumentation, ultra-high-pu-rity, medical and analytical ap-plications.
Catalogue 5210-UK© 2001 Parker Hannifin
Ottodruck 09/01
FluidConnectors EuropeSales Offices
Parker Hannifin GmbHGeschäftsbereich PolyflexAn der Tuchbleiche 4D - 68623 LampertheimTel : 06256 81-0Fax : 06256 81-100
Parker Hannifin GmbHBadener Straße 12A - 2700 Wiener NeustadtTel : (0) (26 22) 23 501Fax : (0) (26 22) 66 212
Parker Hannifin S.A.-N.V.Parc Industriel SudZone II15, rue du BosquetB - 1400 NivellesTel : (0) 67 280 900Fax : (0) 67 280 999
Parker Hannifin s.r.o.Dopravaku 723CZ - 184 00 Prague 8Tel : (0) (2) 830 85221Fax : (0) (2) 830 85360
Parker Hannifin GmbHGeschäftsbereich ErmetoAm Metallwerk 9D - 33659 BielefeldTel : (0) (521) 4048-0Fax : (0) (521) 4048-4280
Parker Hannifin GmbHFluid VerbindungsteileFreiherr-vom-Stein-Straße 1D - 35325 MückeTel : (0) (6400) 922-0Fax : (0) (6400) 922-102
Parker Hannifin GmbHGeschäftsbereich PolyflexAn der Tuchbleiche 4D - 68623 LampertheimTel : (0) (6256) 81-0Fax : (0) (6256) 81-100
Parker Hannifin Danmark A/SIndustrigrenen 11DK - 2635 IshøjTel : 43 56 04 00Fax : 43 73 31 07
Parker Hannifin A/SBerghagan - P.O. Box 8N - 1402 SkiTel : 64 91 10 00Fax : 64 91 10 90
Parker Hannifin B.V.Edisonstraat 1Postbus 340NL - 7570 AH OldenzaalTel : (0) 541 585000Fax : (0) 541 585459
Parker Hannifin Sp.z.o.o.ul. Parowcowa 8BPL - 02-445 WarszawaTel : (0) (22) 863 49 42Fax : (0) (22) 863 49 44
Parker Hannifin Portugal,LdaTravessa da Bataria,184 - r/c Drto / 1° Esq.PT - 4450-625 Leça daPalmeiraTel : 22 9997360Fax : 22 9961527
Parker HannifinCorporationKomsomolsky Prospect 42Office 434RU - 119827 GSP MoscowG-48Tel/Fax : (095) 234 0054
Parker Hannifin ABFagerstagatan 51Box 8314S - 16308 Spanga-StockholmTel : (0) 8 5979 5000Fax : (0) 8 761 81 70
Parker HannifinCorporationvul. Velyka Vasylkivska 9/2Office 59UA - 01004 KievTel : (80) (44) 2207 432Fax : (80) (44) 2206 534
Parker Hannifin España S.AP.I. Las Monjas -C/.Estaciones, 8E - 28850 Torrejón de Ardoz(Madrid)Tel : 91 675 73 00Fax : 91 675 77 11
Parker Hannifin SA17, Rue des BûchillonsZ.I. du Mt Blanc - BP 524F - 74112 AnnemasseCedexTel : (0) 4 50 87 80 80Fax : (0) 4 50 37 86 85
Parker Hannifin OyYlästöntie 16FIN - 01510 VantaaTel : (0) (9) 476 731Fax : (0) (9) 476 732 00
Parker Hannifin plcWetherby RoadGB - Derby DE24 8JHTel : (0) 1332 36 56 31Fax : (0) 1332 36 80 38
Parker Hannifin S.p.A.Via Privata Archimede 1I - 20094 Corsico (MI)Tel : 02 451921Fax : 02 4479340
Parker Sales Ireland LtdBracetown Business ParkClonee, County MeathIE - Republic of IrelandTel : (0) (1)801 4010Fax : (0) (1)801 4132
Parker Hannifin Corp.701, Gateway PlazaHiranandani Garden, PowaiIN - Mumbai 400076Tel : (0) (22)-5705881Fax : (0) (22)-5705880
Internet: http://www.parker.com/uk
For further information on other Parker Products, call the European Product Information Centre free of charge on 00800 27 27 5374.
Recommended