Presentation on six weeks industrial training

05/03/2023

Presentation on six weeks industrial training

Automobiles , Petrol and Diesel engines(overhauling)/Snow

machinesADNAN SAHIB BHAT REG NO :- 11109997

05/03/2023

Contents:-

About the department

Objectives of industrial training

Automobiles

Engine type

Engine cycle(2-4-6 stroke)

Engine parts

Basic engine service (Air filter)

Conclusion and future scope

05/03/2023

Department profile

• The Mechanical Engineering Department is a sub-department of the Govt. of Jammu And Kashmir.

• It renders support to various other govt. departments like PWD, R&B, LAWDA, PHE, and Railways.

• It acquires, supplies and maintains heavy machinery.

• It provides support to the Hospitals all over the state for their AC`s and heating systems.

• It plays a vital role during winters by supplying machinery for clearance of snow.

05/03/2023

Objectives of Industrial Training

• Acquiring knowledge about various automobile engine parts.

• An overview about the servicing and overhauling of various engine parts.

• Learning about the various engine cycles (2-4-6 stroke engines).

05/03/2023

Automobiles used in Mechanical Engineering Department

• In the training the department dealt with heavy machinery like :-

TIPPERA truck having a rear platform which can be raised at its front end, thus enabling a load to be discharged.

05/03/2023

ROAD ROLLER

A road roller is a compactor type engineering vehicle used to compact soil, gravel, concrete, or asphalt in the construction of roads and foundations

05/03/2023

SNOW CLEARING MACHINE

A snow clearing machine is used for removing snow from an area where it is not wanted, such as a driveway, sidewalk, roadway, railroad track, etc

05/03/2023

TYPES OF ENGINE

On the basis of Fuel used

Petrol ignition engine

DIESEL IGNITION ENGINE

On the basis of combustion

chamber location

INTERNAL COMBUSTION

ENGINE

External combustion

engine

On the basis of number of

cylinders

3 cylinder 4 cylinder 5 cylinder 6 cylinder 12 cylinder

05/03/2023

Engine cycle

Two –stroke engine

type of internal combustion engine which completes a power cycle in only one crankshaft revolution and with two strokes

05/03/2023

A four-stroke engine (also known as four-cycle) is an internal combustion engine in which the piston completes four separate strokes viz 1- intake. 2-compress. 3-power. 4-exhaust.

05/03/2023

• Cylinder Block• Piston• Connecting Rod• Cam• Camshaft• Combustion Chamber• Piston Rings• Inlet and Exhaust valves• Flywheel• Intake and Exhaust Manifolds• Combustion Chamber• Fuel Injector• Push rods• Rocker Arms• Fuel Injectors

Engine components

05/03/2023

Basic engine service• Servicing of Basic engine parts was done there at my industrial training like AIR FILTER FUEL FILTER

Air filter

05/03/2023

05/03/2023

Conclusion and future scope

• It was observed that the Mechanical Engineering Department is a vital department because every other Engineering department relies on it for maintenance and service of Heavy Machinery.

• Though it provides satisfactory services with the infrastructure available, it lacks on the front of technological advancement.

• The department has an everlasting future but it can thrive only with the introduction and employment of latest technologies and techniques.

05/03/2023

Thank you