Presentation

Preview:

DESCRIPTION

Presentation

Citation preview

Flexi 3-Sector RF Module 2100 MHz (FRGT)

SW Definable Radio for WCDMA and LTE concurrent Operation

• 25 kg, 3HU• IP65• HxWxD (mm*) – 133x447x420

• 3 x 90W MCPA with 80W at the antenna

connector

• Full band supported with SW configurable IBW

across band

• Supported IBW of 40MHz on TX and Rx as

60MHz

• WCDMA configurations up to 4+4+4

• HW supports chaining of the radios

• Three 6Gbps OBSAI interfaces

• Concurrent operation of WCDMA + LTE defined

by SW

* - w/o Casing

Flexi RRH 2100 (FRGQ)

• 2 x 40W at the antenna connector

• Bandwidth Tx 20MHz, Rx 60MHz

• WCDMA configurations up to 2+2

• HW supports chaining of the radios

• Two OBSAI interfaces with 3 Gbps capacity

each

• MIMO Capable HW having 2 Tx branches

• Concurrent operation WCDMA and LTE defined

by SW

• 15 kg• IP65• HxWxD (mm) – 579x338x194

SW Definable Radio for WCDMA and LTE Operation

System Module- Pay As you Grow Capacity Steps

2x Capacity expansion Sub-Module (FBBA -> WCDMA)

System Module (FSMF)HxWxD - 133mm x 447mm x 420mm

Capacity Steps

CE capacity(UL+DL)

Base Module 528+528

With 1st Extension Module

1104+1104

With 2 Ext. Modules

1680+1680

DC-Out4x 16mm²

Sync OutHDMI

Sync InHDMI

EACHDMI

EIF1RJ45

BB EXT2QSFP

BB EXT1QSFP

sRIOSFP+

RF/EXT1..33x SFP+

EIF2/RF/6SFP+

RF/EXTSFP+

BB EXTQSFP

sRIOSFP+

DC-inPwrProfile

DC-outPwrProfile

DC-outPwrProfile

DC-in2x 16mm²

LMPRJ45

External Connectors

Flexi Multiradio System Module : Interfaces

• FSMx will have a 48V input screw terminal connector on the front panel for power input• 4 x RP3-01 optical interfaces implemented with SFPs. These interfaces can be connected to FRMs or other FSMxs for transporting RP3 between modules.

Note- TDM interface card offered as Optional

Optional TDM interface

mcRNC Introduction

• More than 10 Commercial Deployment.

• Modular Design• Fully HW redundant and operator

configurable with a min. 2 modules and max 8 modules

• Module size 4U (444x450x177mm)• Power consumption < 600 W

/module• Full IP support.• Weight per module-25 Kg• Sites on TDM supported via ML-PPP

• Only one HW module type • Each card inside can be

programmed to any functionality

Option for AC or DC power modules

HD U

BO

C-A

HD

SA

M-A

BO

C-A

BO

C-A

BO

C-A

BO

C-A

BO

C-A

BO

C-A

BO

C-A

mcRNC Introduction

mcRNC Configurations and Capacity

2.6 Gbps

7.5 Gbps

20 Gbps

S1-B2 S3-B2 S7-B2

Configuration S1-B2 S3-B2 S7-B2

AMR Busy Hour Call Attempts 760 000 2 140 000 4 520 000

PS BHCA (HSPA) 1 400 000 3 500 000 7 920 000

AMR Erlangs 19 000 53 500 113 000

AMR Erlangs (including soft handover) 26 600 74 900 158 200

Iub max total UP throughput (CS+PS, FP, UL+DL) in Mbps 2 640 7 520 20 000

Max number of cells 2 600 6 600 10 000

Max number of RRC connected UE's 352 000 1 000 000 1 000 000

Product Capacity statements as per NSN Traffic Profile shared in the RFP Response.

Recommended