Embed Size (px)
DESCRIPTION
Presentation
Citation preview
Flexi 3-Sector RF Module 2100 MHz (FRGT)
SW Definable Radio for WCDMA and LTE concurrent Operation
• 25 kg, 3HU• IP65• HxWxD (mm*) – 133x447x420
• 3 x 90W MCPA with 80W at the antenna
connector
• Full band supported with SW configurable IBW
across band
• Supported IBW of 40MHz on TX and Rx as
60MHz
• WCDMA configurations up to 4+4+4
• HW supports chaining of the radios
• Three 6Gbps OBSAI interfaces
• Concurrent operation of WCDMA + LTE defined
by SW
* - w/o Casing
Flexi RRH 2100 (FRGQ)
• 2 x 40W at the antenna connector
• Bandwidth Tx 20MHz, Rx 60MHz
• WCDMA configurations up to 2+2
• HW supports chaining of the radios
• Two OBSAI interfaces with 3 Gbps capacity
each
• MIMO Capable HW having 2 Tx branches
• Concurrent operation WCDMA and LTE defined
by SW
• 15 kg• IP65• HxWxD (mm) – 579x338x194
SW Definable Radio for WCDMA and LTE Operation
System Module- Pay As you Grow Capacity Steps
2x Capacity expansion Sub-Module (FBBA -> WCDMA)
System Module (FSMF)HxWxD - 133mm x 447mm x 420mm
Capacity Steps
CE capacity(UL+DL)
Base Module 528+528
With 1st Extension Module
1104+1104
With 2 Ext. Modules
1680+1680
DC-Out4x 16mm²
Sync OutHDMI
Sync InHDMI
EACHDMI
EIF1RJ45
BB EXT2QSFP
BB EXT1QSFP
sRIOSFP+
RF/EXT1..33x SFP+
EIF2/RF/6SFP+
RF/EXTSFP+
BB EXTQSFP
sRIOSFP+
DC-inPwrProfile
DC-outPwrProfile
DC-outPwrProfile
DC-in2x 16mm²
LMPRJ45
External Connectors
Flexi Multiradio System Module : Interfaces
• FSMx will have a 48V input screw terminal connector on the front panel for power input• 4 x RP3-01 optical interfaces implemented with SFPs. These interfaces can be connected to FRMs or other FSMxs for transporting RP3 between modules.
Note- TDM interface card offered as Optional
Optional TDM interface
mcRNC Introduction
• More than 10 Commercial Deployment.
• Modular Design• Fully HW redundant and operator
configurable with a min. 2 modules and max 8 modules
• Module size 4U (444x450x177mm)• Power consumption < 600 W
/module• Full IP support.• Weight per module-25 Kg• Sites on TDM supported via ML-PPP
• Only one HW module type • Each card inside can be
programmed to any functionality
Option for AC or DC power modules
HD U
BO
C-A
HD
SA
M-A
BO
C-A
BO
C-A
BO
C-A
BO
C-A
BO
C-A
BO
C-A
BO
C-A
mcRNC Introduction
mcRNC Configurations and Capacity
2.6 Gbps
7.5 Gbps
20 Gbps
S1-B2 S3-B2 S7-B2
Configuration S1-B2 S3-B2 S7-B2
AMR Busy Hour Call Attempts 760 000 2 140 000 4 520 000
PS BHCA (HSPA) 1 400 000 3 500 000 7 920 000
AMR Erlangs 19 000 53 500 113 000
AMR Erlangs (including soft handover) 26 600 74 900 158 200
Iub max total UP throughput (CS+PS, FP, UL+DL) in Mbps 2 640 7 520 20 000
Max number of cells 2 600 6 600 10 000
Max number of RRC connected UE's 352 000 1 000 000 1 000 000
Product Capacity statements as per NSN Traffic Profile shared in the RFP Response.
