View
4
Download
0
Category
Preview:
Citation preview
Email: Info@TableDesigns.com TableDesigns.com Telephone: (727) 375-1212
Hours of Operation: Monday - Friday 9AM - 5PM EST | Address: 11445 Pyramid Drive, Odessa, FL 33556
7. FLIP OVER FOR FINISHED PRODUCT.6. CONNECT BASE TO COLUMN BY TIGHTENING NUT.
5. FLIP BASE UPSIDE DOWN AND GUIDE ROD THROUGH BASE’S CENTER HOLE4. SCREW GLIDES INTO BOTTOM OF BASE
3. PLACE COLUMN OVER ROD2. FLIP SPIDER AND ROD UPSIDE DOWN, THREADED END OF ROD SHOULD FACE UP
1. SLIDE ROD THROUGH TOP OF SPIDER
PARTS LIST(1) Rod(1) Nut(1) Spider(1) Column(1) Base(5) glides
TOOLS LIST7/16” Socket Wrench
PIETA TABLE BASE ASSEMBLY INSTRUCTIONS
Recommended