View
1
Download
0
Category
Preview:
Citation preview
Active and Approved Project Listingas at 23rd December 2011
Page 1
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100842 Quality management systems - Requirements Other Other 12 QR-008 JNT Approval & Publish
100445 AS 1085.14 Pre-stressed concrete sleepers Standard Revision 3 CE-002 AUS Consult & Resolve
100444 AS 1085.20 Welding of steel rails Standard Revision 3 CE-002 AUS Consult & Resolve
100762 AS 1085.21 Railway track material – Turnouts, switches and crossings Standard New 7 CE-002 AUS Team Establish
100716 AS 1141.24 Standard durability by exposure to sodium sulphate Standard Revision 4 CE-012 AUS Consult & Resolve
100683 AS 1141.3.1 Sampling of Aggregate Standard Revision 4 CE-012 AUS Consult & Resolve
100715 AS 1141.3.2 Sampling of rock spalls and boulders Standard Revision 4 CE-012 AUS Consult & Resolve
100718 AS 1141.60.1 Accelerated mortar bar test for assessment of alkali silica reaction in concrete aggregate
Standard New 4 CE-012 AUS Working Draft Dev
100719 AS 1141.60.2 Concrete prism test for assessment of alkali silica reaction in concrete aggregate
Standard New 4 CE-012 AUS Working Draft Dev
100717 AS 1141.66 Methylene blue value of fine aggregate Standard New 4 CE-012 AUS Consult & Resolve
100436 AS 1176.11 Playground equipment and surfacing Part 11: Additional specific safety requirements and test methods for spatial network
Standard New 9 CS-005 AUS Working Draft Dev
100798 AS 12239 Smoke alarms using scattered light, transmitted light or ionization Standard International Adoption - Modified
4 FP-002 AUS Team Establish
100785 AS 12647.1 Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 1: Parameters and measurement methods
Standard International Adoption - Identical
11 EX-004 AUS Working Draft Dev
100782 AS 12647.7 Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 7: Proofing processes wokring directly from digital data
Standard International Adoption - Identical
11 EX-004 AUS Working Draft Dev
5457 AS 1317 Plastic Toilet Seats Standard Revision 6 WS-003 AUS Pub Com Draft
100415 AS 1375 Industrial Fuel Fired Appliances Standard Revision 7 AG-011 AUS Pub Com Draft
6072 AS 1418.15 Cranes, Hoists and winches - Part 15: Concrete placing equipment Standard Revision 3 ME-005 AUS Working Draft Dev
8578 AS 1418.5 Cranes, hoists and winches Part 5: Mobile cranes Standard Revision 3 ME-005 AUS Pub Com Draft
100391 AS 1428.2 Design for access and mobility - Wayfinding Standard Revision 4 ME-064 AUS Team Establish
100392 AS 1428.4.2 Design for access and mobility - Enhanced and additional requirements - Buildings and facilities
Standard Revision 4 ME-064 AUS Team Establish
100389 AS 1428.8 Design for access and mobility - Adaptable Housing Standard Revision 4 ME-064 AUS Team Establish
Active and Approved Project Listingas at 23rd December 2011
Page 2
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100401 AS 1546.4 On-site domestic wastewater treatment units - Domestic Greywater Treatment Systems
Standard New 6 WS-013 AUS Working Draft Dev
100741 AS 1562.1 (Amd1) Design and installation of sheet roof and wall cladding - Metal Standard Revised Text Amendment
4 BD-014 AUS Working Draft Dev
100235 AS 1597.2 Revision of AS1597.2 “Precast reinforced concrete box culverts: Part 2 Large culverts”.
Standard Revision 4 CE-026 AUS Consult & Resolve
8091 AS 1636.1 Tractors - Roll-over protective structures - Criteria and tests - Conventional track tractors
Standard Revision 7 ME-065 AUS Pub Com Draft
8089 AS 1636.2 Tractors - Roll-over protection structures - Criteria and tests - Rear-mounted for narrow-track tractors
Standard Revision 7 ME-065 AUS Pub Com Draft
8090 AS 1636.3 Tractors - Roll-over protection structures - Criteria and tests - Front-mounted for narrow-track tractors
Standard Revision 7 ME-065 AUS Pub Com Draft
1488 AS 1657 Fixed platforms, walkways, stairways and ladders - Design, construction and installation Part 1: Requirements for general applications
Standard Revision 4 SF-013 AUS Pub Com Draft
7761 AS 1668.2 The use of ventilation and air-conditioning in buildings Part 2: Ventilation design for indoor air contaminant control.
Standard Revision 3 ME-062 AUS Working Draft Dev
100980 AS 1668.4 Natural Ventilation of Buildings Standard Revision 3 ME-062 AUS Working Draft Dev
100799 AS 1670.1 Fire detection, warning, control and intercom systems Standard Revision 4 FP-002 AUS Team Establish
100800 AS 1670.4 Fire detection, warning, control and intercom systems - Commissioning Standard Revision 4 FP-002 AUS Team Establish
100757 AS 1670.4 Fire detection, warning, control and intercom systems - System design, installation and commissioning - Sound systems and intercom systems for emergency purposes
Standard International Adoption - Modified
12 FP-002 AUS Working Draft Dev
1166 AS 1682.1 Fire/smoke damper-Specification (ME/062-0580) Standard Revision 3 ME-062 AUS Consult & Resolve
1165 AS 1682.2 Fire/smoke damper-Installation (ME/062-0570) Standard Revision 3 ME-062 AUS Consult & Resolve
100970 AS 1684 Residential timber-framed construction Standard Correction Amendment
4 TM-002 AUS Consult & Resolve
100971 AS 1684.2 Residential timber-framed construction Part 2: Non-cyclonic areas Standard Correction Amendment
4 TM-002 AUS Consult & Resolve
100972 AS 1684.3 Residential timber-framed construction Part 3: Cyclonic areas Standard Correction Amendment
4 TM-002 AUS Consult & Resolve
Active and Approved Project Listingas at 23rd December 2011
Page 3
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100973 AS 1684.4 Residential timber-framed construction Part 4: Simplified—Non-cyclonic areas
Standard Correction Amendment
4 TM-002 AUS Consult & Resolve
100884 AS 1742.1 Manual of uniform traffic control devices Parts 1: General introduction and index of signs
Standard Revision 7 MS-012 AUS Team Establish
100885 AS 1742.14 Manual of uniform traffic control devices Part 14: Traffic signal Standard Revision 7 MS-012 AUS Team Establish
100886 AS 1742.6 Manual of uniform traffic devices Part 6: Tourist and services signs Standard Revision 7 MS-012 AUS Team Establish
100887 AS 1742.7 Manual of uniform traffic devices Part 7: Railway crossings Standard Revision 7 MS-012 AUS Team Establish
100888 AS 1743 Road signs - Specifications Standard Revision 7 MS-012 AUS Team Establish
100889 AS 1744 Standard alphabets for road signs Standard Revision 7 MS-012 AUS Team Establish
100912 AS 1766.1.6 Food microbiology, Method 1.6: General procedures and techniques - Estimation of most probable number (MPN) of microorganisms
Standard Revision 1 FT-024 AUS Team Establish
100917 AS 1766.3.1 Food microbiology, Method 3.1: Examination of specific products - Meat and meat products other than poultry
Standard Withdrawal 1 FT-024 AUS Team Establish
100916 AS 1766.3.15 Food microbiology, Method 3.15: Examination of specific products - Cheese
Standard Revision 1 FT-024 AUS Team Establish
100918 AS 1766.5 Food microbiology, Method 5: Preparation of culture media, diluents and reagents
Standard Withdrawal 1 FT-024 AUS Team Establish
100178 AS 1884 Floorcoverings Resilient Sheet and Tiles Standard Revision 3 PL-015 AUS Consult & Resolve
100999 AS 1900 Flotation aids for water familiarization and swimming tuition Standard Revision 9 CS-021 AUS Team Establish
100348 AS 1915 Electrical equipment for explosive atmospheres - Battery-operated vehicles
Standard Revision 5 EL-014 AUS Team Establish
100821 AS 1915 Powered industrial trucks - Part 12: Operating in hazardous Areas Standard Revision 3 ME-026 AUS Team Establish
5525 AS 2047 External Windows and Doors In Buildings - Performance Specifications Standard Revision 4 BD-021 AUS Pub Com Draft
100817 AS 2067 Substations and HV Installations greater than 1kV ac Standard Revision 5 EL-043 AUS Team Establish
6301 AS 2118.4 Automatic fire sprinkler systems, Part 4 Residential sprinkler systems Standard Revision 4 FP-004 AUS Balloting
5293 AS 2118.6 Automatic fire sprinkler systems, Part 6: Combined sprinkler and hydrant
Standard Revision 4 FP-004 AUS Balloting
100398 AS 2252.5 Controlled environments - Design, installation and use of cytotoxic drug safety cabinets
Standard Revision 12 ME-060 AUS Working Draft Dev
Active and Approved Project Listingas at 23rd December 2011
Page 4
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
7217 AS 2278.2 Aerosol containers, Part 2: Plastics aerosol dispensers of capacity 50 mL to 1000 mL inclusive
Standard Revision 3 PK-013 AUS Working Draft Dev
101034 AS 2290.3 Electrical equipment for coal mines - Maintenance and overhaul - Maintenance of gas detecting and monitoring equipment
Standard Revision 2 EL-023 AUS Working Draft Dev
100756 AS 2321 Short-link chain for lifting purposes Standard Revision 3 ME-025 AUS Working Draft Dev
100793 AS 2337.3 Gas cylinder test stations Part 3: Transportable gas cylinders—Periodic inspection and testing of composite gas cylinders (ISO 11623:2002, MOD)
Standard International Adoption - Modified
3 ME-002 AUS Pre-Assignment
100455 AS 2359.1 Powered industrial trucks - General Requirements Standard Revision 7 ME-026 AUS Working Draft Dev
100456 AS 2359.2 Powered industrial trucks - General Requirements Standard Revision 7 ME-026 AUS Pub Com Draft
100824 AS 2359.6 Powered industrial trucks - Safety requriements and verification Part 6: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks.
Standard Revision 7 ME-026 AUS Team Establish
8597 AS 2419.1 Fire Hydrants -System Design & Installations Standard Revision 4 FP-009 AUS Working Draft Dev
100458 AS 2419.3 Fire Hydrant Installations - Part 3 Fire brigade booster connections Standard Revision 4 FP-009 AUS Pub Com Draft
100794 AS 2473.2 Valves for compressed gas cylinders Part 2: Outlet connections (threaded) and stem (inlet) threads
Standard Revision 3 ME-002 AUS Team Establish
6155 AS 2550.15 Cranes, hoists and winches - Safe use, Part 15: Concrete placing equipment
Standard Revision 3 ME-005 AUS Working Draft Dev
100720 AS 2758.1 Aggregate and rock for engineering purposes - Part 1 Concrete Aggregate
Standard Revision 4 CE-012 AUS Working Draft Dev
100990 AS 2832.1 Cathodic protection of metals, Part 1: Pipes and cables Standard Revision 3 MT-014 AUS Team Establish
101000 AS 2885.0 Gas and Liquid Petroleum, Part 0: General Requirements Standard Revised Text Amendment
5 ME-038 AUS Team Establish
100302 AS 2885.1 Pipelines - gas and liquid petroleum Part 1: Design and construction Standard Revision 5 ME-038 AUS Working Draft Dev
5579 AS 2885.3 Pipelines - Operation and Maintenance Standard Revision 5 ME-038 AUS Balloting
100926 AS 2891.1.1 Methods of sampling and testing asphalt - Sampling - Loose asphalt Standard Revision 3 CE-006 AUS Team Establish
100933 AS 2891.12.1 Methods of sampling and testing asphalt - Determination of the permanent compressive strain characteristics of asphalt - Dynamic creep test
Standard Revision 4 CE-006 AUS Team Establish
100854 AS 2941 Fixed fire protection installations – Pumpset systems Standard Revision 3 FP-008 AUS Team Establish
Active and Approved Project Listingas at 23rd December 2011
Page 5
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100278 AS 3533.1 Amusement rides and devices - Operation and Maintenance Standard Revised Text Amendment
12 ME-051 AUS Pub Com Draft
100291 AS 3533.2 Amusement rides and devices - Design and Construction Standard Revised Text Amendment
12 ME-051 AUS Pub Com Draft
100277 AS 3533.4.2 Concessional Karting Code of Practice Standard New 12 ME-051 AUS Pub Com Draft
100879 AS 3533.4.2 Amusement rides and devices – Part 4.2: Specific requirements – Contained play facilities
Standard New 12 ME-051 AUS Team Establish
100107 AS 3566.2 Revision of AS 3566.2 Corrosion Performance of Steel Fasteners Standard Revision 3 ME-029 AUS Balloting
100816 AS 3580.11.1 Methods for sampling and analysis of ambient air - Determination of volatile organic compounds - Methane and non-methane volatile organic compounds - Direct-reading instrumental method
Standard Revision 5 EV-007 AUS Team Establish
4754 AS 3600 Concrete Structures - Supplement Commentary Other 4 BD-002 AUS Pub Com Draft
100836 AS 3660.1 Termite management - New building work Standard Revision 4 BD-094 AUS Working Draft Dev
100837 AS 3660.2 Termite management - In and around existing buildings and structures - Guidelines
Standard Revision 4 BD-094 AUS Working Draft Dev
100838 AS 3660.3 Termite management - Assessment criteria for termite management systems
Standard Revision 4 BD-094 AUS Working Draft Dev
100250 AS 3688 Amendment to AS 3688:2005 Standard Revision 6 WS-001 AUS Project Planning
100818 AS 3700 SUPP 1 Masonry structures – Commentary (Supplement to AS 3700-2011) Supplement Revision 4 BD-004 AUS Team Establish
100459 AS 3705 Geotextiles - Identification, marking, and general data Standard Revision 4 CE-020 AUS Working Draft Dev
100460 AS 3706.1 Geotextiles - Methods of test - General requirements, sampling, conditioning, basic physical properties and statistical analysis
Standard Revision 4 CE-020 AUS Working Draft Dev
100469 AS 3706.10.1 Geotextiles - Methods of test - Determination of transmissivity - Radial method
Standard Revision 4 CE-020 AUS Working Draft Dev
100470 AS 3706.11 Geotextiles - Methods of test - Determination of durability - Resistance to degradation by light, heat and moisture
Standard Revision 4 CE-020 AUS Working Draft Dev
100471 AS 3706.13 Geotextiles - Methods of test - Determination of durability - Resistance to certain microbiological agents
Standard Revision 4 CE-020 AUS Working Draft Dev
100461 AS 3706.2 Geotextiles - Methods of test - Determination of tensile properties - Wide-strip method
Standard Revision 4 CE-020 AUS Working Draft Dev
Active and Approved Project Listingas at 23rd December 2011
Page 6
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100462 AS 3706.3 Geotextiles - Methods of test - Determination of tearing strength - Trapezoidal method
Standard Revision 4 CE-020 AUS Working Draft Dev
100463 AS 3706.4 Geotextiles - Methods of test - Determination of burst strength - California bearing ratio (CBR)
Standard Revision 4 CE-020 AUS Working Draft Dev
100464 AS 3706.5 Geotextiles - Methods of test - Determination of puncture resistance - Drop cone method
Standard Revision 4 CE-020 AUS Working Draft Dev
100465 AS 3706.6 Geotextiles - Methods of test - Determination of seam strength Standard Revision 4 CE-020 AUS Working Draft Dev
100466 AS 3706.7 Geotextiles - Methods of test - Determination of pore-size distribution - Dry-sieving method
Standard Revision 4 CE-020 AUS Working Draft Dev
100467 AS 3706.9 Geotextiles - Methods of test - Determination of permittivity, permeability and flow rate
Standard Revision 4 CE-020 AUS Working Draft Dev
100760 AS 3775.1 Chain slings - Grade T - Product specification Standard Revision 3 ME-025 AUS Working Draft Dev
100759 AS 3775.2 Chain slings - Grade T - Care and use Standard Revision 3 ME-025 AUS Working Draft Dev
100761 AS 3776 Lifting components for Grade T chain slings Standard Revision 3 ME-025 AUS Working Draft Dev
100430 AS 3850.1 Precast and Tilt-Up Concrete Elements in Building Construction - part 1 General Requirements
Standard Revision 4 BD-066 AUS Working Draft Dev
100664 AS 3850.2 Precast and Tilt-Up Concerete Elements in Building Construction - Part 2 Precast and Tilt-up Concrete Panels
Standard Revision 4 BD-066 AUS Working Draft Dev
100421 AS 3920 Pressure Equipment - Conformity Assessment Standard Revision 3 ME-001 AUS Working Draft Dev
100320 AS 3999-1992 Thermal insulation of dwellings - Bulk insulation - Installation requirements
Standard Revised Text Amendment
4 BD-058 AUS Consult & Resolve
100322 AS 3999-1992 Thermal insulation of dwellings - Bulk insulation - Installation requirements
Standard Revision 4 BD-058 AUS Team Establish
100663 AS 4032.4 Thermostatic Mixing Taps - Materials, Design and Performance Requirements
Standard New 6 WS-026 AUS Working Draft Dev
100967 AS 4055 Wind loads for housing Standard Revision 4 BD-099 AUS Working Draft Dev
100751 AS 4069 Bathseats – Product requirements - Requirements and test methods Standard Revision 8 ME-067 AUS Team Establish
100228 AS 4084 Steel Storage Racking Standard Revision 4 BD-062 AUS Consult & Resolve
100394 AS 4100 Steel structures Standard Revised Text Amendment
4 BD-001 AUS Pub Com Draft
Active and Approved Project Listingas at 23rd December 2011
Page 7
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100446 AS 4145.5 - BS EN 1154 MOD
Controlled Door Closing Devices Standard Other 3 CS-082 AUS Consult & Resolve
100393 AS 4181 Repair and Off-take clamps for Waterworks purposes Standard Revision 6 WS-016 AUS Working Draft Dev
7919 AS 4254.1 Ductwork for air-handling systems in buildings, Part 1: Flexible duct Standard Revision 3 ME-062 AUS Consult & Resolve
4005 AS 4254.2 Ductwork for air-handling systems in buildings, Part 2: Rigid duct Standard Revision 3 ME-062 AUS Working Draft Dev
100758 AS 4428.4 Fire detection, warning, control and intercom systems - Control and indicating equipment - Intercommunication systems for emergency purposes
Standard Revision 12 FP-002 AUS Working Draft Dev
100016 AS 4454 Compost, soil conditioners and mulches Standard Revision 9 CS-037 AUS Approval & Publish
100468 AS 4551 Domestic gas cooking appliances Standard Revision 5 AG-001 AUS Team Establish
100473 AS 4552 Gas fired water heaters for hot water supply and/or central heating Standard Revision 5 AG-001 AUS Team Establish
100011 AS 4552.3 Methods of test for energy efficiency of gas-fired water heaters Standard New Standard 5 AG-001 AUS Working Draft Dev
100474 AS 4554 Gas laundry dryers Standard Revision 5 AG-001 AUS Team Establish
100476 AS 4557 Domestic outdoor gas barbecues Standard Revision 5 AG-001 AUS Team Establish
100477 AS 4560 Gas pool heaters Standard Revision 5 AG-001 AUS Team Establish
100480 AS 4563 Commercial catering gas equipment Standard Revision 5 AG-001 AUS Team Establish
100449 AS 4606 Fire resistant and antistatic requirements for conveyor belting used in underground coal mines
Standard Revision 2 RU-002 AUS Working Draft Dev
100486 AS 4643 Overhead radiant tube gas heaters Standard Revision 5 AG-001 AUS Team Establish
100483 AS 4646 Gas appliance standards - Definitions and calculations Standard Revision 5 AG-001 AUS Team Establish
100810 AS 4654.1 Waterproofing membrane systems for exterior use - Above ground level materials
Standard Revision 4 BD-013 AUS Pub Com Draft
100811 AS 4654.2 Waterproofing membrane systems for exterior use - Above ground level - Design and installation
Standard Revision 4 BD-013 AUS Pub Com Draft
100648 AS 4773.1 Masonry in small buildings - Design Standard Correction Amendment
4 BD-004 AUS Balloting
8904 AS 4980.1 Digital radio-Requirements for receivers Standard New Standard 11 CT-002 AUS Working Draft Dev
100812 AS 4989 Trampolines— Safety aspects Standard Revision 12 CS-100 AUS Team Establish
100292 AS 5100.1 Bridge Design - Scope and General Principles Standard Revision 4 BD-090 AUS Pub Com Draft
Active and Approved Project Listingas at 23rd December 2011
Page 8
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100693 AS 5100.1 Bridge design - Scope and general principles - Commentary (Supplement to AS5100.1 - 2004)
Standard Revision 4 BD-090 AUS Pub Com Draft
100297 AS 5100.2 Bridge Design - Design Loads Standard Revision 4 BD-090 AUS Pub Com Draft
100694 AS 5100.2 Bridge design - Design loads - Commentary (Supplement to AS 5100.2 2004)
Standard Revision 4 BD-090 AUS Pub Com Draft
100293 AS 5100.3 Bridge Design - Foundations and soil supporting structures Standard Revision 4 BD-090 AUS Pub Com Draft
100695 AS 5100.3 Bridge design - Foundations and soil supporting structures (Supplement to AS 5100.3)
Standard Revision 4 BD-090 AUS Pub Com Draft
100295 AS 5100.4 Bridge Design - Bearing and Deck Joints Standard Revision 4 BD-090 AUS Pub Com Draft
100696 AS 5100.4 Bridge design - Bearings and deck joints - Commentary (Supplement to AS 5100.4 - 2004)
Standard Revision 4 BD-090 AUS Pub Com Draft
100298 AS 5100.5 Bridge Design - Concrete Standard Revision 4 BD-090 AUS Pub Com Draft
100700 AS 5100.5 Bridge design - Concrete Standard Revision 4 BD-090 AUS Pub Com Draft
100296 AS 5100.6 Bridge Design - Steel and Composite Construction Standard Revision 4 BD-090 AUS Pub Com Draft
100697 AS 5100.6 Bridge design - Steel and composite construction - Commentary (Supplement to AS 5100-6 - 2004)
Standard Revision 4 BD-090 AUS Pub Com Draft
100294 AS 5100.7 Bridge Design - Rating of existing Bridges Standard Revision 4 BD-090 AUS Pub Com Draft
100698 AS 5100.7 Bridge design - Rating of existing bridges - Commentary (Supplement to AS 5100.7 - 2004)
Standard Revision 4 BD-090 AUS Pub Com Draft
7497 AS 5200.464 Hot water manual or sensor-activated pumping systems Standard Revision 6 WS-026 AUS Consult & Resolve
100071 AS 5239 Examination of Ignitable Liquids in Fire Debris Standard New 3 CH-041 AUS Approval & Publish
100286 AS 5334 New Australian Standard - Principle Based Climate Change Adaptation - Requirements for Settlements and Infrastructure
Standard New 4 BD-103 AUS Consult & Resolve
100416 AS 5388.1 Recognition, Recording, recovery and Storage of Physical Material for Forensic Purposes
Standard New 12 CH-041 AUS Pub Com Draft
100301 AS 5478 National recordkeeping metadata element set Standard New 11 IT-021 AUS Consult & Resolve
100420 AS 5481 Standard Practice for the Manufacture of Products Used in the Collection of Biological Material for Forensic DNA Analysis
Standard New 12 CH-041 AUS Working Draft Dev
100020 AS 5830.1 Technical specification for plumbing and drainage products - In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic. Part A: Metal Bodied
Standard New 6 WS-022 AUS Balloting
Active and Approved Project Listingas at 23rd December 2011
Page 9
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100167 AS 5830.2 Technical specification for plumbing and drainage products - In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic. Part B: Plastic Bodied
Standard New 6 WS-022 AUS Approval & Publish
100438 AS 6000-2009 Organic and biodynamic products Standard Revised Text Amendment
1 FT-032 AUS Working Draft Dev
100354 AS 60038 Standard voltages Standard Revision 5 EL-034 AUS Working Draft Dev
100965 AS 60044.1-2007/Cor 1 Instrument transformers Part 1: Current transformers
Standard Correction Amendment
11 EL-013 AUS Approval & Publish
100767 AS 62040.3 Uninterruptible power systems (UPS) - Method of specifying the performance and test requirements
Standard International Adoption - Identical
5 EL-027 AUS Team Establish
100822 AS 62430 Environmentally conscious design for electrical and electronic products Standard International Adoption - Identical
5 EL-015 AUS Team Establish
101014 AS ISO 14171 TBA Standard International Adoption - Modified
3 WD-002 AUS Team Establish
101015 AS ISO 14174 TBA Standard International Adoption - Modified
3 WD-002 AUS Team Establish
101011 AS ISO 14341 TBA Standard International Adoption - Modified
3 WD-002 AUS Team Establish
100955 AS ISO 15189 Medical laboratories -- Requirements for quality and competence Standard International Adoption - Identical
8 HE-029 AUS Team Establish
101029 AS ISO 16175.1 ISO16175-1 Information and documentation - Principles and functional requirements for records in electronic office environments - Part 1: Overview and statement of principles. International Organisation for Standardization.
Standard International Adoption - Identical
11 IT-021 AUS Team Establish
101030 AS ISO 16175.2 Information and documentation - Principles and functional requirements for records in electronic office environments - Part 2: Guidelines and functional requirements for digital records management systems
Standard International Adoption - Identical
11 IT-021 AUS Team Establish
101031 AS ISO 16175.3 Information and documentation - Principles and functional requirements for records in electronic office environments - Part 3: Guidelines and functional requirements for records in business systems
Standard International Adoption - Identical
11 IT-021 AUS Team Establish
101012 AS ISO 16834 TBA Standard International Adoption - Modified
3 WD-002 AUS Team Establish
Active and Approved Project Listingas at 23rd December 2011
Page 10
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
101013 AS ISO 21952 TBA Standard International Adoption - Modified
3 WD-002 AUS Team Establish
101016 AS ISO 24598 TBA Standard International Adoption - Modified
3 WD-002 AUS Team Establish
101017 AS ISO 26304 TBA Standard International Adoption - Modified
3 WD-002 AUS Team Establish
100754 AS ISO 7240.16 Fire detection and alarm systems - Part 16: Sound System Control and Indicating Equipment
Standard International Adoption - Modified
12 FP-002 AUS Team Establish
100981 AS ISO 7240.16 Fire detection and alarm systems -- Part 16: Sound system control and indicating equipment
Standard International Adoption - Modified
12 FP-002 INT Team Establish
100795 AS ISO 7240.20 Fire detection and alarm systems - Part 20: Aspirating smoke detectors Standard International Adoption - Modified
12 FP-002 AUS Team Establish
100755 AS ISO 7240.24 Fire detection and fire alarm systems - Part 24: Sound system loudspeakers
Standard International Adoption - Modified
12 FP-002 AUS Team Establish
101021 AS ISO/IEC 27005 Information technology ― Security techniques — Information security risk management
Standard International Adoption - Modified
11 IT-012 AUS Team Establish
101025 AS ISO/IEC 27037 Information technology — Security techniques — Guidelines for identification, collection, acquisition, and preservation of digital evidence.
Standard International Adoption - Modified
11 IT-012 AUS Team Establish
100274 AS NZS 4505 Domestic Garage Doors Standard Revision 4 BD-014 AUS Consult & Resolve
100892 AS NZS IEC 62271-1 High-voltage switchgear and controlgear - Part 1: Common specifications
Standard Other 5 EL-007 AUS Working Draft Dev
100893 AS NZS IEC 62271-203 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
Standard Other 5 EL-007 AUS Working Draft Dev
100424 AS NZS ISO 7176-4:201X Wheelchairs - Determination of energy consumption of electric wheelchairs
Standard International Adoption - Identical
8 ME-067 JNT Balloting
100431 AS NZS ISO 8124.3 Safety of toys - Migration of certain elements Standard Other 9 CS-018 JNT Approval & Publish
100752 AS NZS ISO 9999:201X Assistive products for persons with disability - Classification and terminology
Standard International Adoption - Identical
8 ME-067 JNT Balloting
100217 AS XXXX Gas Appliance Standards - Part 0 Safety Requirements Standard New 5 AG-001 AUS Working Draft Dev
100797 AS/NZ ISO 19101-2 Geographic Information/Geomatics - Reference Model – Part 2: Imagery
Technical Spec New 11 IT-004 JNT Balloting
Active and Approved Project Listingas at 23rd December 2011
Page 11
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100328 AS/NZS Solar thermal cooling systems – Energy rating and testing for performance
Standard New 5 CS-028 JNT Working Draft Dev
100507 AS/NZS Standard Guidelines for Subsurface Utility Engineering (SUE) in Australia and New Zealand
Standard New 12 IT-036 JNT Working Draft Dev
100894 AS/NZS Plugs and socket-outlets for household and similar electrical appliances - Part 1: General requirements
Standard International Adoption - Identical
5 EL-004 JNT Working Draft Dev
100450 AS/NZS 1080.1 Timber - Methods of test - Part 1: Moisture Content Standard Revision 3 TM-003 JNT Working Draft Dev
100966 AS/NZS 1170.2 Structural design actions - Wind actions Standard Revised Text Amendment
4 BD-006 JNT Working Draft Dev
100987 AS/NZS 1170.2 Structural design actions - Wind actions Standard Correction Amendment
4 BD-006 JNT Working Draft Dev
100356 AS/NZS 1249-20XX Children's nightwear and limited daywear having reduced fire hazard Standard Revision 9 CS-086 JNT Working Draft Dev
100771 AS/NZS 1337.1 Personal eye protection - Eye and face protectors for occupational applications
Standard Revised Text Amendment
12 SF-006 JNT Pub Com Draft
100772 AS/NZS 1337.2 Peronal eye protection - Mesh eye and face protectors Standard International Adoption - Modified
12 SF-006 AUS Working Draft Dev
100769 AS/NZS 1337.6 Personal eye protection - Prescription eye protectors against low and medium impact
Standard Revision 12 SF-006 JNT Pub Com Draft
100774 AS/NZS 1338.1 Filters for eye protectors - Filters for protection against radiation generated in welding and allied operations
Standard Revision 12 SF-006 AUS Working Draft Dev
100775 AS/NZS 1338.2 Filters for eye protectors - Filters for protection against ultraviolet radiation
Standard Revision 12 SF-006 AUS Working Draft Dev
100940 AS/NZS 1338.3 Filters for eyeprotectors- Filters for protection against infra-red radiation Standard Revision 12 SF-006 AUS Working Draft Dev
5292 AS/NZS 1359.5 Three-phase cage induction motors - High efficiency and minimum energy performance standards (MEPS) requirements
Standard Revision 5 EL-009 JNT Working Draft Dev
100528 AS/NZS 1359.5 Rotating electrical machines - General requirements, Part 5: Three-phase cage induction motors - High efficiency and minimum energy performance standards requirements
Standard Correction Amendment
5 EL-009 JNT Working Draft Dev
100414 AS/NZS 1425 LP Gas Fuel Systems for Vehicle Engines Standard Revision 7 ME-046 JNT Working Draft Dev
100290 AS/NZS 1547 On-site domestic wastewater management Standard Revision 6 WS-013 JNT Balloting
100390 AS/NZS 1554.6 Structural steel welding - Welding stainless steels for structural purposes
Standard Revision 3 WD-003 JNT Consult & Resolve
Active and Approved Project Listingas at 23rd December 2011
Page 12
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100299 AS/NZS 1576.3 Scaffolding - Prefabricated and tube-and-coupler scaffolding Standard Revision 4 BD-036 JNT Pub Com Draft
100300 AS/NZS 1576.4 Scaffolding - Suspended scaffolding Standard Revision 4 BD-036 JNT Pub Com Draft
100744 AS/NZS 1604.1 Specification for preservative treatment - Sawn and round timber Standard Revised Text Amendment
4 TM-006 JNT Team Establish
100943 AS/NZS 1604.2 Specification for preserve treatment- Reconstitutted wood-based products
Standard Revised Text Amendment
4 TM-006 JNT Team Establish
100984 AS/NZS 1604.3 Specification for preservative treatment - Plywood Standard Revised Text Amendment
4 TM-006 JNT Team Establish
100945 AS/NZS 1604.4 Specification for Preserve Treatment- Laminated Veneer lumber (LVL) Standard Revised Text Amendment
4 TM-006 JNT Team Establish
100946 AS/NZS 1604.5 Specification for Preservative treatment- Glued laminated timber products
Standard Revision 4 TM-006 JNT Team Establish
100447 AS/NZS 1677.1 Refrigerating systems - Refrigerant classification Standard Other 3 ME-006 JNT Working Draft Dev
100448 AS/NZS 1677.2 Definition, classification and selection criteria Standard Revision 3 ME-006 JNT Working Draft Dev
8994 AS/NZS 1680.5 Interior and workplace lighting, Outdoor Work Places Standard New 5 LG-001 JNT Pub Com Draft
100969 AS/NZS 1698 Protective helmets for vehicle users Standard Revised Text Amendment
9 CS-076 JNT Consult & Resolve
100279 AS/NZS 1716 Respiratory protective devices Standard Revision 12 SF-010 JNT Consult & Resolve
100440 AS/NZS 1754 Child restraint systems for use in motor vehicles Standard Revision 7 CS-085 JNT Working Draft Dev
100913 AS/NZS 1766.1.4 Food microbiology, Method 1.4: General procedures and techniques - Colony count - Surface spread method
Standard Revision 1 FT-024 JNT Team Establish
100911 AS/NZS 1766.2.12 Food microbiology, Method 1.12: Examination for specific organisms - Escherichia coli in bivalve molluscs - Rapid method
Standard Revision 1 FT-024 JNT Team Establish
100915 AS/NZS 1766.3.14 Food microbiology, Method 3.14: Examination of specific products - Butter, margarine and related products
Standard Revision 1 FT-024 JNT Team Establish
100914 AS/NZS 1766.3.5 Food microbiology, Method 3.5: Examination of specific products - Molluscs, crustaceans and fish, and products thereof
Standard Revision 1 FT-024 JNT Team Establish
100502 AS/NZS 1768 Lightning protection Standard Revision 5 EL-024 JNT Working Draft Dev
100237 AS/NZS 1869 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas
Standard Revision 5 AG-013 JNT Consult & Resolve
100989 AS/NZS 2144 Traffic Signal Lanterns Standard Revision 7 LG-006 JNT Team Establish
Active and Approved Project Listingas at 23rd December 2011
Page 13
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
8203 AS/NZS 2208 Safety glazing materials in buildings Standard Revision 3 BD-007 JNT Pub Com Draft
100381 AS/NZS 2229 Fuel dispensing equipment for explosive atmospheres Standard Revision 5 EL-014 JNT Working Draft Dev
100478 AS/NZS 2290.1 Electrical equipment for coal mines - Introduction and maintenance - For hazardous areas
Standard Revision 2 EL-023 JNT Working Draft Dev
100996 AS/NZS 2312 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
Standard Revision 3 MT-014 JNT Team Establish
3967 AS/NZS 2604 Sunscreen products--Evaluation and classification Standard Revision 9 CS-042 JNT Consult & Resolve
7994 AS/NZS 2885.5 Pipelines - Gas and liquid petroleum - Field pressure testing Standard Revision 5 ME-038 JNT Consult & Resolve
100935 AS/NZS 2891.14.1.1 Methods of sampling and testing asphal;t- Field density tests- Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge- Direct transmission mode
Standard Revision 4 CE-006 JNT Team Establish
100937 AS/NZS 2891.14.2 Methods of sampling and testing asphalt - Field density tests- Determination of field density of compacted asphalt using a nuclear thin-layer density gauge
Standard Revision 4 CE-006 JNT Team Establish
100939 AS/NZS 2891.14.4 Methods of sampling and testing asphalt- Field density tests- Calibration of nuclear surface moisture density gauge- Backscatter mode
Standard Revision 4 CE-006 JNT Team Establish
100930 AS/NZS 2891.3.1 Methods of sampling ans testing asphalt- Bitumen content and aggregate grading- Centrifugal extraction method
Standard Revision 4 CE-006 JNT Team Establish
100931 AS/NZS 2891.3.2 Methods of sampling and testing asphalt- Bitumen content and aggregate grading- centrifugal extraction method
Standard Revision 4 CE-006 JNT Team Establish
100484 AS/NZS 3007 Electrical installations - Surface mines and associated processing plant - Scope and definitions
Standard Revision 2 EL-023 JNT Pub Com Draft
7731 AS/NZS 3018 Electrical installations - Domestic installations Standard Revision 5 EL-001 JNT Working Draft Dev
100402 AS/NZS 3080:2003 Information technology - Generic cabling for customer premises Standard Revision 11 CT-001 JNT Pub Com Draft
100975 AS/NZS 3102:2002 A3 Approval and test specification – Electric duct heaters Standard Revised Text Amendment
5 EL-002 JNT Pub Com Draft
100316 AS/NZS 3105 Approval and test specification—Electrical portable outlet devices Standard Revised Text Amendment
5 EL-004 JNT Team Establish
100317 AS/NZS 3133 Amdt 2 Approval and test specification - Air-break switches Other Revised Text Amendment
5 EL-004 JNT Approval & Publish
Active and Approved Project Listingas at 23rd December 2011
Page 14
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100705 AS/NZS 3500.2:2003/Amd 4 AS/NZS 3500 – Plumbing And Drainage Standard Revised Text Amendment
6 WS-014 JNT Balloting
100982 AS/NZS 3500.3 Plumbing and Drainage - Stormwater Drainage Standard Revised Text Amendment
6 WS-014 JNT Team Establish
7088 AS/NZS 3500.5 AS/NZS 3500.5 Plumbing and drainage - Domestic installations Standard Revision 6 WS-014 JNT Pub Com Draft
7894 AS/NZS 3551 Amendment 2 to AS/NZS 3551:05 Technical management programs for medical devices
Standard New 8 HE-003 JNT Consult & Resolve
100815 AS/NZS 3580 Methods for sampling and analysis of ambient air Method -Determination of suspended particulate matter—PM2.5
Standard New 5 EV-007 JNT Team Establish
100745 AS/NZS 3580.13.2 Measurement of fluorides and directional dust in ambient air Standard Revision 1 EV-007 JNT Team Establish
7743 AS/NZS 3584.3 Maintenance of diesel engine systems for underground coal mines Standard Revision 2 ME-018 JNT Approval & Publish
100441 AS/NZS 3629.A, B, C… Methods of testing child restraints Standard Revision 7 CS-085 JNT Project Planning
7052 AS/NZS 3695.1 Manual Wheelchairs - product requirements Standard Revision 8 ME-067 JNT Consult & Resolve
7053 AS/NZS 3695.2 Wheelchairs - Electrically powered wheelchairs and their chargers Standard Revision 8 ME-067 AUS Working Draft Dev
100403 AS/NZS 3696.11 Wheelchairs - Test dummies Standard International Adoption - Identical
8 ME-067 JNT Team Establish
100426 AS/NZS 3696.16 Wheelchairs - resistance to ignition of postural supports - requirements & test methods
Standard International Adoption - Identical
8 ME-067 JNT Team Establish
100425 AS/NZS 3696.5 Wheelchairs - Determination of overall dimensions, mass and turning space
Standard International Adoption - Modified
8 ME-067 JNT Team Establish
100427 AS/NZS 3696.8 Wheelchairs - Requirements & test methods for static, impact & fatigue strength
Standard International Adoption - Identical
8 ME-067 JNT Team Establish
100287 AS/NZS 3760:20XX In-service safety inspection and testing of electrical equipment Standard Revision 3 EL-036 JNT Balloting
5544 AS/NZS 3785.6 Guides and rubbing ropes for conveyances Standard Revision 2 ME-018 JNT Working Draft Dev
100495 AS/NZS 3785.8 Underground mining - Shaft equipment - Personnel conveyances in other than vertical shafts
Standard Revision 2 ME-018 JNT Working Draft Dev
100479 AS/NZS 3800 Electrical equipment for explosive atmospheres - Repair and overhaul Standard Revision 2 EL-023 JNT Consult & Resolve
100976 AS/NZS 3820 AMD 1 Essential safety requirements for electrical equipment Standard Correction Amendment
12 QR-012 JNT Pub Com Draft
100882 AS/NZS 3845.1 Roadside safety systems and devices - Barrier systems Standard Revision 7 CE-033 JNT Team Establish
Active and Approved Project Listingas at 23rd December 2011
Page 15
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100881 AS/NZS 3845.2 Roadside safety systems and devices - Temporary work sites, bollards, light poles and sign supports
Standard New 7 CE-033 JNT Team Establish
100706 AS/NZS 3879 Solvent Cements and Priming Fluids for PVC and ABS Pipe Fittings Standard Revision 6 PL-021 JNT Working Draft Dev
8803 AS/NZS 4067 Protective helmets - firefighters Standard Revision 12 SF-049 JNT Pub Com Draft
100397 AS/NZS 4187 Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities
Standard Revision 8 HE-023 JNT Working Draft Dev
100814 AS/NZS 4200.2 Pliable building membranes and underlays - Part 2: Installation requirements
Standard Revision 4 BD-058 JNT Team Establish
100475 AS/NZS 4240.3 Standards for Mining Electrical Equipment including hazardous areas equipment.
Standard Revision 2 EL-023 JNT Pub Com Draft
100789 AS/NZS 4268 Radio equipment and systems - Short range devices - Limits and methods of measurements
Standard Revision 11 RC-006 JNT Working Draft Dev
100442 AS/NZS 4370 Restraint of children with disabilities in motor vehicles Standard Revision 7 CS-085 JNT Project Planning
100840 AS/NZS 4386.1 Domestic kitchen assemblies - Kitchen units Standard Revision 4 BD-089 JNT Team Establish
100841 AS/NZS 4386.2 Domestic kitchen assemblies - Installation Standard Revision 4 BD-089 JNT Team Establish
100674 AS/NZS 4417.1 Regulatory compliance mark for electrical and electronic equipment Part 1: Use of the mark
Standard Revision 5 QR-012 JNT Consult & Resolve
100675 AS/NZS 4417.2 Marking of electrical and electronic products to indicate compliance with regulations Part 2: Specific requirements for particular regulatory applications
Standard Revision 5 QR-012 JNT Consult & Resolve
100753 AS/NZS 4487 Condensed Aerosol Fire Extinguishing Systems Standard Revision 4 FP-011 JNT Team Establish
100686 AS/NZS 4582:2004 MF/HF radiotelephone equipment Standard Reconfirmation 11 RC-004 JNT Approval & Publish
8112 AS/NZS 4586 Slip resistance of new pedestrian surface material Standard Other 4 BD-094 JNT Working Draft Dev
100750 AS/NZS 4602.2 High Visibility Garments for Fire Service Personnel Standard New 12 SF-004 JNT Working Draft Dev
101035 AS/NZS 4641 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels - General requirements and test methods
Standard Revision 2 EL-023 JNT Working Draft Dev
100951 AS/NZS 4645.3 AMD 2 Gas distribution networks-Part 3: Plastics pipes systems Standard Correction Amendment
5 AG-008 JNT Consult & Resolve
8113 AS/NZS 4663 Slip resistance measurement in existing pedestrian surfaces Standard Revision 4 BD-094 JNT Working Draft Dev
100273 AS/NZS 4666 Insulating Glass Units Standard Revision 4 BD-007 JNT Consult & Resolve
Active and Approved Project Listingas at 23rd December 2011
Page 16
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100494 AS/NZS 4730.3 Mining - Winding equipment - Part 3: Mechanical Brakes Standard New 2 ME-018 AUS Working Draft Dev
100497 AS/NZS 4730.4 Mining—Winding equipment - Drum assemblies Standard New 3 ME-018 AUS Working Draft Dev
100496 AS/NZS 4730.5 AS 4730-5 Mining - Winding equipment - Part 5: Winder control systems
Standard New 2 ME-018 AUS Working Draft Dev
100383 AS/NZS 4745 Code of practice for handling combustible dusts Standard Revision 5 MS-011 JNT Team Establish
100386 AS/NZS 4777.1 Grid connection of energy systems via inverters - installation requirements
Standard Revision 5 EL-042 JNT Working Draft Dev
100387 AS/NZS 4777.2 Grid connection of energy systems via inverters - inverter and grid connection requirements
Standard Revision 5 EL-042 JNT Working Draft Dev
100986 AS/NZS 4847.2 AMD 1 Self Ballasted lamps for general lighting services Standard Correction Amendment
5 EL-041 JNT Consult & Resolve
100988 AS/NZS 4847.2 AMDT 1 Self ballasted lamps for general lighting services - Minimum Energy Performance Standards (MEPS) requirements of Document
Standard Correction Amendment
5 EL-041 JNT Approval & Publish
7730 AS/NZS 4853 Electrical hazards on metallic pipelines Standard Revision 5 EL-001 JNT Balloting
100481 AS/NZS 4871.1 Electrical equipment for mines and quarries - General requirements Standard Revised Text Amendment
2 EL-023 JNT Pub Com Draft
100482 AS/NZS 4871.6 Earth-moving machinery and ancillary equipment for use in mines - Electrical wiring systems at extra-low voltage and AS/NZS 4871.6 Electrical equipment for coal mines, for use underground - Diesel powered machinery and ancillary equipment
Standard Revised Text Amendment
2 EL-023 JNT Working Draft Dev
7192 AS/NZS 5026 The storage and handling of Class 4 dangerous goods Standard New 3 CH-009 JNT Pub Com Draft
100385 AS/NZS 5033 Installation of photovoltaic (PV) arrays Standard Revision 5 EL-042 JNT Consult & Resolve
100327 AS/NZS 5347 Residential airconditioning systems – Minimum application requirements for energy efficiency
Standard New 5 EE-001 JNT Working Draft Dev
100746 AS/NZS 5601.1 Gas Installations – Part 1 - General Installations Standard Revision 5 AG-006 JNT Team Establish
100748 AS/NZS 5601.2 Gas installations - Part 2 - LP Gas installations in caravans and boats for non-propulsive purposes
Standard Revision 5 AG-006 JNT Team Establish
100765 AS/NZS 60065-2011 Audio, video and similar electronic apparatus - Safety requirements Standard New 5 TE-001 JNT Working Draft Dev
100807 AS/NZS 60076.1 Power transformers - Part 1: General Standard Revision 5 EL-008 JNT Working Draft Dev
100805 AS/NZS 60076.2 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
Standard Revision 5 EL-008 JNT Working Draft Dev
Active and Approved Project Listingas at 23rd December 2011
Page 17
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100803 AS/NZS 60076.5 Power Transformers – Part 5: Ability to withstand short circuit Standard Revision 5 EL-008 JNT Working Draft Dev
100806 AS/NZS 60076.6 Power transformers - Part 6: Reactors Standard Revision 5 EL-008 JNT Working Draft Dev
100804 AS/NZS 60076.7 Power transformers - Part 7: Loading guide for oil-immersed power transformers
Standard Revision 5 EL-008 JNT Working Draft Dev
7918 AS/NZS 60076.99 Revision of AS/NZS 60076.99 - Power transformers, Part 99: Minimum Energy Performance Standard (MEPS) requirements for distribution transformers
Standard New Standard 5 EL-008 JNT Working Draft Dev
100342 AS/NZS 60079-0 ED 3.0 Interpretation sheet 1 - Electrical apparatus for explosive gas atmospheres - General requirements
Ruling Other 5 EL-014 JNT Team Establish
100362 AS/NZS 60079-19 Ed 3 Explosive atmospheres - Equipment repair, overhaul and reclamation Standard Revision 5 EL-014 JNT Team Establish
100382 AS/NZS 60079-29-1 Ed. 1.0 Interpretation sheet 1 - Explosive atmospheres - Gas detectors - Performance requirements of detectors for flammable gases
Ruling Other 5 EL-014 JNT Team Establish
100346 AS/NZS 60079-29-1 Ed. 2.0 Explosive atmospheres - Gas detectors - Performance requirements of detectors for flammable gases
Standard International Adoption - Identical
5 EL-014 JNT Team Establish
100360 AS/NZS 60079.0 Electrical apparatus for explosive gas atmospheres - General requirements
Standard International Adoption - Identical
5 EL-014 JNT Working Draft Dev
100492 AS/NZS 60079.35.2 Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety-related matters
Standard New 2 EL-023 JNT Balloting
100313 AS/NZS 60320.1 Appliance couplers for household and similar general purposes - General requirements
Standard Revision 5 EL-004 JNT Balloting
100974 AS/NZS 60335.2.9 A1 Household and similar electrical appliances – Safety – Part 2.9: Particular requirements for grills, toasters and similar portable cooking appliances
Standard Revised Text Amendment
5 EL-002 JNT Balloting
100680 AS/NZS 60335.2.90:2006 A2 Household and similar electrical appliances – Safety – Part 2.90: Particular requirements for commercial microwave ovens
Standard Revised Text Amendment
5 EL-002 JNT Consult & Resolve
101040 AS/NZS 60745.2.22 A1 Hand-held motor-operated electric tools - Safety – Part 2.22: Particular requirements for cut-off machines
Standard Correction Amendment
5 EL-002 JNT Consult & Resolve
100763 AS/NZS 60950.1 2011 A1 Information technology equipment - Safety - General requirements Standard New 5 TE-001 JNT Working Draft Dev
100896 AS/NZS 60998.1 Connecting devices for low voltage circuits for household and similar purposes - General requirements
Standard Revision 5 EL-004 JNT Working Draft Dev
Active and Approved Project Listingas at 23rd December 2011
Page 18
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100897 AS/NZS 60998.2.1 Connecting devices for low voltage circuits for household and similar purposes - Particular requirements for connecting devices as separate entities with screw-type clamping units
Standard Revision 5 EL-004 JNT Working Draft Dev
100898 AS/NZS 60998.2.2 Connecting devices for low voltage circuits for household and similar purposes - Particular requirements for connecting devices as separate entities with screwless-type clamping units
Standard Revision 5 EL-004 JNT Working Draft Dev
100899 AS/NZS 60998.2.3 Connecting devices for low voltage circuits for household and similar purposes - Particular requirements for connecting devices as separate entities with insulating piercing clamping units
Standard Revision 5 EL-004 JNT Working Draft Dev
100900 AS/NZS 60998.2.4 Connecting devices for low voltage circuits for household and similar purposes - Particular requirements for twist-on connecting devices
Standard Revision 5 EL-004 JNT Working Draft Dev
100003 AS/NZS 61000.3.100 Electromagnetic Compatibility (EMC) Limits – Steady State Voltage Limits in Public Electricity Systems
Standard New 5 EL-034 JNT Pub Com Draft
100333 AS/NZS 61000.3.3 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current (<=16 A per phase and not subject to conditional connection
Standard Revision 5 EL-034 JNT Working Draft Dev
100343 AS/NZS 61000.4.13 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
Standard Revision 5 EL-034 JNT Working Draft Dev
100344 AS/NZS 61000.4.14 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test
Standard Revision 5 EL-034 JNT Working Draft Dev
100345 AS/NZS 61000.4.15 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Flickermeter - Function and design specifications
Standard Revision 5 EL-034 JNT Working Draft Dev
100347 AS/NZS 61000.4.16 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Test for immunity to conducted common mode disturbances in the frequency range 0 Hz to 150 kHz
Standard Revised Text Amendment
5 EL-034 JNT Working Draft Dev
100349 AS/NZS 61000.4.27 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Unbalance, immunity test
Standard Revision 5 EL-034 JNT Working Draft Dev
100350 AS/NZS 61000.4.30 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods
Standard Revision 5 EL-034 JNT Working Draft Dev
Active and Approved Project Listingas at 23rd December 2011
Page 19
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100352 AS/NZS 61000.4.34 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
Standard Revision 5 EL-034 JNT Working Draft Dev
100340 AS/NZS 61000.4.7 Electromagnetic compatibility (EMC) - Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
Standard Revision 5 EL-034 JNT Working Draft Dev
100341 AS/NZS 61000.4.8 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power frequency magnetic field immunity test
Standard Revision 5 EL-034 JNT Working Draft Dev
101023 AS/NZS 61000.6.3 Update of the Generic Emission Standards Standard International Adoption - Identical
5 TE-003 JNT Team Establish
101024 AS/NZS 61000.6.4 TBA Standard International Adoption - Identical
5 TE-003 JNT Team Establish
100925 AS/NZS 61386.1 Conduit systems for cable management - Part 1: General requirements Standard Revision 5 EL-004 JNT Working Draft Dev
100314 AS/NZS 61535.1 Installation couplers - General requirements Standard Revision 5 EL-004 JNT Approval & Publish
100337 AS/NZS 80079.34 Explosive gas atmospheres - Data for flammable gases and vapours, relating to the use of apparatus
Standard International Adoption - Identical
5 MS-011 INT Working Draft Dev
100363 AS/NZS 80079.34 Explosive atmospheres - Application of quality systems for electrical and non electrical equipment
Standard International Adoption - Identical
5 EL-014 JNT Working Draft Dev
100433 AS/NZS 8124.1 Amdt 1 Safety of toys - Safety aspects related to mechanical and physical properties
Standard International Adoption - Modified
9 CS-018 JNT Team Establish
100839 AS/NZS CISPR 15:2011 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Standard New 5 TE-003 JNT Consult & Resolve
101028 AS/NZS CISPR13 Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement
Standard International Adoption - Identical
5 TE-003 JNT Team Establish
100773 AS/NZS IEC 60825-1 Safety of laser products - Part 1: Equipment classification and requirements
Standard International Adoption - Identical
11 SF-019 JNT Approval & Publish
100777 AS/NZS IEC 60825-14 Safety of laser products - Part 14: A user's guide Standard International Adoption - Identical
11 SF-019 JNT Approval & Publish
100780 AS/NZS IEC 60825-2 Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
Standard International Adoption - Identical
11 SF-019 JNT Approval & Publish
Active and Approved Project Listingas at 23rd December 2011
Page 20
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100813 AS/NZS IEC 62335 Switched Protective Earth Portable RCDs Standard Revision 5 EL-004 JNT Working Draft Dev
100783 AS/NZS IEC 62471 Photobiological Safety of lamps and lamp system Standard International Adoption - Identical
11 SF-019 JNT Approval & Publish
101022 AS/NZS IEC 62471.2 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
Standard International Adoption - Identical
8 SF-019 JNT Team Establish
8874 AS/NZS IEC/TR 61000.1.4 EMC-General-Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in frequency range up to 2 kHz
Technical Report New 5 EL-034 JNT Working Draft Dev
100330 AS/NZS IEC/TR 61000.2.6 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances
Technical Report New 5 EL-034 JNT Working Draft Dev
100339 AS/NZS IEC/TR 61000.3.13 Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems - Including Corrigendum 1
Technical Report New 5 EL-034 JNT Working Draft Dev
100336 AS/NZS IEC/TR 61000.3.6 Electromagnetic compatibility (EMC) - Limits - Assessment of emission limits for distorting loads in MV and HV power systems
Technical Report Revision 5 EL-034 JNT Working Draft Dev
100338 AS/NZS IEC/TR 61000.3.7 Electromagnetic compatibility (EMC) - Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems
Technical Report Revision 5 EL-034 JNT Working Draft Dev
100883 AS/NZS ISO ISO 12870 Opthlamic optics - Spectacle frames - Requirements and test methods Standard Revision 3 MS-024 AUS Team Establish
100843 AS/NZS ISO 10001 Quality management - Customer satisfaction - Guidelines for codes of conduct organizations
Standard International Adoption - Identical
12 QR-008 JNT Consult & Resolve
100844 AS/NZS ISO 10003 Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations
Standard International Adoption - Identical
12 QR-008 JNT Consult & Resolve
100400 AS/NZS ISO 10535:201X Hoists for the transfer of disabled persons – Requirements and test methods.
Standard International Adoption - Identical
8 ME-067 INT Balloting
100749 AS/NZS ISO 13028:201X Information and documentation – Implementation Guidelines for Digitisation of Records
Standard Other 11 IT-021 JNT Balloting
100766 AS/NZS ISO 13028:201X Information and documentation – Managing metadata for records -- Part 3: Self-assessment method
Standard Other 11 IT-021 JNT Consult & Resolve
100868 AS/NZS ISO 19110:2006/Amd 1
Geographic Information/Geomatics - Methodology for feature cataloguing
Standard Revised Text Amendment
11 IT-004 JNT Balloting
Active and Approved Project Listingas at 23rd December 2011
Page 21
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100856 AS/NZS ISO 19115-2 Geographic Information/Geomatics - Metadata - Part 2: Extensions for imagery and gridded data
Standard New 11 IT-004 JNT Pub Com Draft
100857 AS/NZS ISO 19119:2006/Amd 1
Geographic information/Geomatics - Services Standard Revised Text Amendment
11 IT-004 JNT Pub Com Draft
100862 AS/NZS ISO 19142 Geographic Information/Geomatics - Web feature service Standard New 11 IT-004 JNT Pub Com Draft
100863 AS/NZS ISO 19143 Geographic Information/Geomatics - Filter encoding Standard New 11 IT-004 JNT Pub Com Draft
100864 AS/NZS ISO 19144.1 Geographic Information/Geomatics - Classification systems - Part 1: Classification system structure
Standard New 11 IT-004 JNT Pub Com Draft
100865 AS/NZS ISO 19146 Geographic information/geomatics - Cross-domain vocabularies Standard New 11 IT-004 JNT Pub Com Draft
100738 AS/NZS ISO 5149.2 Design, construction, testing, marking and documentation Standard International Adoption - Modified
3 ME-006 JNT Working Draft Dev
100739 AS/NZS ISO 5149.3 Installation Site Standard International Adoption - Modified
3 ME-006 JNT Working Draft Dev
100740 AS/NZS ISO 5149.4 Operation, maintenance, repair and recovery Standard International Adoption - Modified
3 ME-006 JNT Working Draft Dev
100422 AS/NZS ISO 7176.10: 201X Wheelchairs - Determination of obstacle-climbing ability of electric wheelchairs
Standard International Adoption - Identical
8 ME-067 JNT Balloting
100423 AS/NZS ISO 7176.26: 201X Vocabulary for Wheeled Mobility Systems Standard International Adoption - Identical
8 ME-067 JNT Balloting
101018 AS/NZS ISO 8124 A2 Safety of toys - Part 1: Safety aspects related to mechanical and physical properties
Standard International Adoption - Identical
9 CS-018 JNT Team Establish
101019 AS/NZS ISO 8124.1 A3 Safety of toys - Part 1: Safety aspects related to mechanical and physical properties Amd 3
Standard International Adoption - Identical
9 CS-018 JNT Team Establish
101020 AS/NZS ISO 8124.6 Safety of toys - Part 6: Swings, slides and similar activity toys for indoor and outdoor family domestic use
Standard International Adoption - Identical
9 CS-018 JNT Team Establish
100848 AS/NZS ISO 9001-2008 Quality management systems - Requirements Standard Correction Amendment
12 QR-008 JNT Approval & Publish
100410 AS/NZS ISO/IEC 14763-2 Planning and installation of copper cabling Standard Revision 11 CT-001 JNT Team Establish
100412 AS/NZS ISO/IEC 14763-2-1 Information technology -- Implementation and operation of customer premises cabling -- Part 2-1: Planning and installation of copper cabling - Identifiers within administration systems
Standard International Adoption - Identical
11 CT-001 JNT Team Establish
100404 AS/NZS ISO/IEC 14763-3 Testing of optical fibre cabling Standard Revision 11 CT-001 JNT Pub Com Draft
Active and Approved Project Listingas at 23rd December 2011
Page 22
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100407 AS/NZS ISO/IEC 15018 Information technology - Generic cabling for homes Standard Revised Text Amendment
11 CT-001 JNT Team Establish
100408 AS/NZS ISO/IEC 15018 Information technology - Generic cabling for homes Standard Revised Text Amendment
11 CT-001 JNT Team Establish
100409 AS/NZS ISO/IEC 24702 Information technology - Generic cabling - Industrial premises Standard Revised Text Amendment
11 CT-001 JNT Approval & Publish
100406 AS/NZS ISO/IEC 24764 Information technology - Generic cabling systems for data centres Standard Revised Text Amendment
11 CT-001 JNT Approval & Publish
100405 AS/NZS ISO/IEC 29125 Telecommunications cabling guidelines for remote powering of data terminal equipment
Standard Revised Text Amendment
11 CT-001 JNT Balloting
100411 AS/NZS ISO/IEC 61935-2 Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Installed cabling
Standard Revised Text Amendment
11 CT-001 JNT Working Draft Dev
100808 AS/NZS2161.6 Occupational Protective Gloves Part 6 - Protective Gloves for Firefighters Laboratory Test Methods and Performance Requirements
Standard Revision 12 SF-049 AUS Working Draft Dev
100936 AS/NZS2891.14.1.2 Methods of sampling and testing asphalt- Field density tests- Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge- Backscatter mode
Standard Revision 4 CE-006 JNT Team Establish
100938 AS/NZS2891.14.3 Methods of sampling and testing asphalt- Field density tests- calibration of nuclear-thin layer density gauge using standard blocks
Standard Revision 4 CE-006 JNT Team Establish
100932 AS/NZS2891.3.3 Methods of sampling and testing asphalt-Bitumen content and aggregate grading - Pressure filter method
Standard Revision 4 CE-006 JNT Team Establish
100661 AS/NZS3823.1.1 Performance of electrical appliances - Airconditioners and heat pumps - Test Methods - Non-ducted airconditioners and heat pumps - Testing and rating for performance
Standard New 5 EL-015 JNT Working Draft Dev
100952 AS/NZS3823.1.2 Performance of electrical appliances—Air conditioners and heat pumps - Energy labelling and minimum energy performance standard (MEPS) requirements
Standard New 5 EL-015 JNT Working Draft Dev
100954 AS/NZS3823.1.4 Performance of electrical appliances - Multiple split-system air conditioners and air-to-air heat pumps -- Testing and rating for performance – New Standard (Adoption of ISO/NP 15042)
Standard New 5 EL-015 JNT Working Draft Dev
100711 AS/NZS4755.3.1 Demand response capabilities and supporting technologies for electrical products - part 3.1: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for air conditioners
Standard New 5 EL-054 JNT Pub Com Draft
Active and Approved Project Listingas at 23rd December 2011
Page 23
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100712 AS/NZS4755.3.2 Interaction of demand response enabling devices and electrical products – Part 3.2 Operational instructions and connections for devices controlling swimming pool pump-units
Standard New 5 EL-054 JNT Pub Com Draft
100959 AS/NZS5813.1 Information technology equipment - Energy performance of computers, Part 1: Methods of measurement
Standard New 5 TE-001 AUS Working Draft Dev
100960 AS/NZS5813.2 Information technology equipment - Energy performance of computers, Part 2: Minimum Energy Performance Standards (MEPS) for computers
Standard New 5 TE-001 AUS Working Draft Dev
100961 AS/NZS5814.1 Information technology equipment - Energy performance of internal power supplies, Part 1: Definitions & methods of measurement
Standard New 5 TE-001 AUS Working Draft Dev
100963 AS/NZS5815.1 Information technology equipment - Energy performance of computer monitors, Part 1: Definitions & methods of measurement
Standard New 5 TE-001 AUS Working Draft Dev
100964 AS/NZS5815.2 Information technology equipment - Energy performance of computer monitors, Part 2: Minimum Energy Performance Standards (MEPS)
Standard New 5 TE-001 AUS Working Draft Dev
100927 AS/NZS61386.21 Conduit systems for cable management- Part 21: Particular requirements- Rigid conduit systems
Standard Revision 5 EL-004 JNT Working Draft Dev
100928 AS/NZS61386.22 Conduit systems for cable management- Part 22: Particular requirements- Pliable conduit systems
Standard Revision 5 EL-004 JNT Working Draft Dev
100701 AS1926.1 - 20XX Part 1 Swimming pool safety - Safety barriers for swimming pools Standard Revision 4 CS-034 AUS Balloting
100704 AS1926.2 - 20XX Swimming pool safety - Location of barriers for swimming pools. Standard Revised Text Amendment
4 CS-034 AUS Balloting
100703 AS1926.3 - 20XX Safety barriers for swimming pools - Water reticulation systems Standard Revised Text Amendment
4 CS-034 AUS Pub Com Draft
100983 AS2050 Installation of roof tiles Standard Revised Text Amendment
6 BD-008 AUS Working Draft Dev
100764 AS2118.1 Revision of AS 2118.1 Automatic fire sprinkler systems Standard Revision 4 FP-004 AUS Team Establish
7204 AS2805.6.7 Derived Unique Key Per Transaction (DUKPT) Standard New 11 IT-005 AUS Consult & Resolve
100702 AS2820 - 20XX Gate units for private swimming pools Standard Revision 4 CS-034 AUS Balloting
100934 AS2891.13.1 Methods of sampling and testing asphalt- Determination of the resilient modulus pof asphalt- Indirect tensile method
Standard Revision 4 CE-006 AUS Team Establish
100929 AS2891.2.2 Methods of samplinbg and testing asphalt- Sample preparation- Compaction of asphalt test specimens using a gyratory compactor
Standard Revision 4 CE-006 AUS Team Establish
Active and Approved Project Listingas at 23rd December 2011
Page 24
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100437 AS3864-20XX Medical refrigeration equipment - For the storage of blood and blood products, and containers for the transport of blood and blood products
Standard Revision 8 HE-020 AUS Pub Com Draft
100819 AS4024.3610 Safety of Machinery - Part 3610: Conveyors – General Safety Requirements
Standard New 2 SF-041 AUS Working Draft Dev
100820 AS4024.3611 Safety of machinery - Part 3611: Conveyors - Belt conveyors for bulk materials handling, travelling trippers and shuttle conveyors
Standard New 2 SF-041 AUS Team Establish
100823 AS4024.3612 Safety of machinery - - Part 3612: Conveyors - Light duty general purpose belt conveyors
Standard New 2 SF-041 AUS Working Draft Dev
100825 AS4024.3613 Safety of machinery - Part 3613: Conveyors - Screw conveyors Standard New 2 SF-041 AUS Working Draft Dev
100826 AS4024.3614 Safety of machinery - Part 3614: Conveyors - Chain conveyors Standard New 2 SF-041 AUS Working Draft Dev
100845 AS4024.3615 Safety of machinery - Part 3615: Conveyors - Mobile and transportable conveyors
Standard New 2 SF-041 AUS Working Draft Dev
100357 AS4371 - 20XX Ceramic tableware Standard Revision 9 CS-094 AUS Consult & Resolve
100373 AS61508 (Commented version - 'supplementary')
Publication of a Commented Version of Parts 1 to 7 of AS 61508 as a Technical Report
Standard Other 11 IT-006 AUS Pub Com Draft
7456 ASCRM 027 Certified reference material -- Alumina -- XRF Elemental analysis Reference Material Other 2 MN-009 AUS Approval & Publish
100790 ASNZS ISO 6709:2008 COR 1-2009
Direct text adoption ISO TC211 Geographic Information/Geomatics program of work of standards
Standard Revision 11 IT-004 JNT Pub Com Draft
100104 ATS 5200.030 Rev. 2 Revision 2 to ATS 5200.030 - Solenoid Valvles. Technical Spec Revision 6 WS-031 AUS Approval & Publish
100143 ATS 5200.106 ATS - Wastewater pumping units (Lifting plants) Technical Spec Revision 6 WS-031 AUS Balloting
7846 ATS 5200.483 Technical Specification for plumbing and drainage products - Vent filters Technical Spec New 6 WS-031 AUS Approval & Publish
8782 ATS 5200.498 Plastic waste fittings Technical Spec New 6 WS-031 AUS Approval & Publish
100210 ATS 5200.504 ATS 5200.504 Water Closet System - Low volume flush water closet with included sewer dosing device
Technical Spec New 6 WS-031 AUS Balloting
100259 ATS 5200.505 Multilayer Piping systems for hot and cold water insatllations inside buildings - Polypropoylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT
Technical Spec New 4 WS-031 AUS Consult & Resolve
100603 ATS 5200.506 Pumps for general use in plumbing water services applications (Rainwater tank pumps)
Technical Spec New 6 WS-031 AUS Working Draft Dev
100555 ATS 5820 E-health web services profile Standard New 9 IT-014 AUS Working Draft Dev
100559 ATS 5821 E-health XML secured payload profiles Standard New 11 IT-014 AUS Working Draft Dev
Active and Approved Project Listingas at 23rd December 2011
Page 25
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100554 ATS 5822 E-health secure message delivery Standard New 11 IT-014 AUS Working Draft Dev
100747 AZ/NZS 2724.5 Ambient air - Particulate matter - Determination of impinged matter expressed as directional dirtiness, background dirtiness and/or area dirtiness (directional dust gauge method)
Standard Revision 1 EV-007 JNT Team Establish
100534 DR AS 2828.1 Health records - Part 1: Paper based Standard Other 8 IT-014 AUS Pub Com Draft
9007 DR AS 2962 Implementation of HL7 V2.x Part 3: Electronic Messages for exchange of information on drug prescription
Standard Revision 8 IT-014 AUS Working Draft Dev
6093 DR AS/NZS 3856.1 (Rev) Hoists and ramps for people with disabilities - Vehicle Mounted Product Requirements
Standard Revision 8 ME-067 JNT Pub Com Draft
100147 DR AS/NZS 3856.2 (Rev) Hoists and ramps for people with disabilities - Vehicle Mounted - Installation Requirements
Standard Revision 8 ME-067 JNT Pub Com Draft
100080 DR ATS 2828.2 Health records - Part 2: Scanned (digitized) requirements to support electronic health records (EHR)
Technical Spec New 11 IT-014 AUS Pub Com Draft
100581 DR ATS 5338 HL7 V2 eReferral implementation profile Technical Spec New 11 IT-014 AUS Consult & Resolve
100541 DR HB 262 (Rev) Gudelines for pathology messaging between pathology providers and health service providers to harmonize with NEHTA’s specifications, IHE profile and AS4700.2 -2007
Handbook Revision 8 IT-014 AUS Approval & Publish
100567 DR TR 5415 Guidelines for the use of HTML display segments in HL7 V2 messages Technical Report New 11 IT-014 AUS Working Draft Dev
100570 DR TR 5416 Guide to HL7 V2 message parsing and management of character escaping with reference to backward compatibility
Technical Report New 11 IT-014 AUS Approval & Publish
100536 HB 174 Information Security Management, Implementation guide for the health sector
Handbook Revision 8 IT-014 AUS Project Planning
100135 HB 203 Revision of Handbook HB 203 Environmental Risk Management: Principles and Process
Handbook Other 12 OB-007 JNT Consult & Resolve
100384 HB 205 OHS Risk Management Handbook Handbook Revision 12 OB-007 JNT Team Establish
100413 HB-252 Residential communications cabling Handbook Standard Revision 11 CT-001 AUS Team Establish
100809 HB 254 Governance, risk management and control assurance Handbook Revision 12 OB-007 AUS Working Draft Dev
100062 HB-436 Revision of HB-436 to align with ISO 31000 Risk Management Handbook Other 12 OB-007 AUS Working Draft Dev
100227 HB 89 Adoption of ISO/IEC 31010 Risk Assessment Techniques as an AS/NZS Handbook under ISO AS31000
Handbook Other 11 QR-005 JNT Consult & Resolve
100272 HB 90-1 The Small Business Handbook - Guide to ISO 9001:2000 Handbook Revision 12 QR-008 AUS Project Planning
Active and Approved Project Listingas at 23rd December 2011
Page 26
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
8328 HB331 Overhead electrical line design - Handbook Handbook New 5 EL-052 AUS Pub Com Draft
100439 MP 100-2009 Procedures for certification of organic and biodynamic products Misc Publication Revised Text Amendment
1 FT-032 AUS Working Draft Dev
9016 MP54 Survey of standards for Telehealth devices Misc Publication New 8 IT-014 AUS Consult & Resolve
100443 New Accessories for child restraints Standard New 7 CS-085 JNT Project Planning
7297 SAA MP 52 Australian certification scheme for plumbing and drainage product Misc Publication Revision 6 P-009 AUS Consult & Resolve
100535 TBA E-health electronic transfer of prescriptions - Logical services model Technical Spec Other 8 IT-014 AUS Consult & Resolve
100537 TBA E-health electronic transfer of prescriptions - Dispense record CDA implementation guide
Technical Spec Other 8 IT-014 AUS Consult & Resolve
100538 TBA E-health electronic transfer of prescriptions - E-Prescription CDA implementation guide
Technical Spec Other 8 IT-014 AUS Consult & Resolve
100539 TBA E-health electronic transfer of prescriptions - Prescription request CDA implementation guide
Technical Spec Other 8 IT-014 AUS Consult & Resolve
100563 TBA E-health electronic transfer of prescriptions - Logical information model Technical Spec Other 11 IT-014 AUS Consult & Resolve
100582 TBA Workflow of remote patient monitoring in patients with chronic disease across a continuum of care
Misc Publication Other 11 IT-014 AUS Consult & Resolve
100668 TBA E-health electronic transfer of prescription - Web Services Platform Specification
Technical Spec Other 11 IT-014 AUS Consult & Resolve
100540 TBA Representation of structured anatomical pathology reports in HL7 V2 messages
Technical Spec New 8 IT-014 AUS Project Planning
100580 TBA Use of HL7 V2 in patient care messaging Technical Spec Other 11 IT-014 AUS Project Planning
100644 TBA Conformance criteria for existing diagnostics messaging standards Misc Publication New 8 IT-014 AUS Project Planning
100979 TBA eNotification - HL7 V2 collaborative care responsibility message Standard New 8 IT-014 AUS Project Planning
7856 TBA Protective footwear for firefighters - Requirements and test methods Standard Revision 3 SF-049 AUS Pub Com Draft
100212 TBA Core discharge summary structured document template Technical Spec New 11 IT-014 AUS Pub Com Draft
100457 TBA Standards for Bushfire Sprinklers Standard New 4 FP-024 AUS Pub Com Draft
8108 TBA Use of HL7 V3 clinical document architecture in referral and forms based communications
Technical Report Other 8 IT-014 AUS Team Establish
100211 TBA Core discharge summary to HL7 v3 CDA document mapping Technical Spec Other 11 IT-014 AUS Team Establish
Active and Approved Project Listingas at 23rd December 2011
Page 27
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100687 TBA Australian Standard for Energy Safety Systems (ENSS) for the electricity supply industry (ESI)
Standard New 5 TBA 0 Team Establish
100770 TBA Finger-jointed structural timber Standard New 4 TM-004 AUS Team Establish
100796 TBA Structural design: Nail-plate jointed timber roof trusses Standard New 4 TM-001 AUS Team Establish
100890 TBA Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
Standard International Adoption - Identical
5 EL-007 AUS Team Establish
100891 TBA Cast resign partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear
Standard International Adoption - Identical
5 EL-007 AUS Team Establish
100907 TBA Installation of ground source heat pump systems - Part 1: System design
Standard New 5 TBA AUS Team Establish
100908 TBA Installation of ground source heat pump systems - Part 2: Installation Standard New 5 TBA AUS Team Establish
100909 TBA Installation of ground source heat pump systems - Part 3: Testing and verification
Standard New 5 TBA AUS Team Establish
100910 TBA Installation of ground source heat pump systems - Part 4: Decommissioning
Standard New 5 TBA AUS Team Establish
100119 TBA Classification system and performance requirements for cricket balls Standard New Standard 9 CS-105 AUS Working Draft Dev
100213 TBA Core GP referral to HL7 v2.x message mapping Technical Spec New 11 IT-014 AUS Working Draft Dev
100329 TBA Collection, storage, transport and treatment of used electrical and electronic equipment
Standard New 11 TBA AUS Working Draft Dev
100504 TBA Core GP referral structured document template Technical Spec New 8 IT-014 AUS Working Draft Dev
100505 TBA Core discharge summary to HL7 V2.x message mapping Technical Spec New 8 IT-014 AUS Working Draft Dev
100533 TBA Guidelines for the specification of conformity assessment schemes for e-health standards
Other Other 11 IT-014 AUS Working Draft Dev
100560 TBA Healthcare identifier HL7 implementation guide Handbook New 11 IT-014 AUS Working Draft Dev
100577 TBA Specification of a mechanism to access historical reports from diagnostic service providers
Technical Report New 11 IT-014 AUS Working Draft Dev
100598 TBA Health indicators conceptual framework Standard New 8 IT-014 AUS Working Draft Dev
100602 TBA Harmonised data types for information interchange Standard New 8 IT-014 AUS Working Draft Dev
100643 TBA Implementation of HL7 V2.x Part 3: electronic messages for exchange of information on drug prescription
Handbook Other 8 IT-014 AUS Working Draft Dev
Active and Approved Project Listingas at 23rd December 2011
Page 28
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100709 TBA Development of a Standard for the Determination of Group numbers for wall and ceiling linings materials
Standard New 4 FP-018 AUS Working Draft Dev
100895 TBA Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications
Standard International Adoption - Modified
5 EL-004 JNT Working Draft Dev
100901 TBA Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0.2mm2 up to 35mm2 (included)
Standard International Adoption - Modified
5 EL-004 AUS Working Draft Dev
100902 TBA Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35mm2 up to 300mm2 (included)
Standard International Adoption - Modified
5 EL-004 AUS Working Draft Dev
100903 TBA Boxes and enclosures for electrical accessories for household and simiilar fixed electrical installations - Part 1: General requirements
Standard International Adoption - Modified
5 EL-004 AUS Working Draft Dev
100904 TBA Boxes and enclosed for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means
Standard International Adoption - Modified
5 EL-004 AUS Working Draft Dev
100905 TBA Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures
Standard International Adoption - Modified
5 EL-004 AUS Working Draft Dev
100906 TBA Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures
Standard International Adoption - Modified
5 EL-004 AUS Working Draft Dev
100977 TBA Person and Provider Identification in Healthcare Standard Revision 8 IT-014 AUS Working Draft Dev
100978 TBA GP referral - Clinical Document Architecture (CDA) Exchange Specification
Technical Spec New 8 IT-014 AUS Working Draft Dev
5281 TR 4896 Health informatics - Electronic health record communication - Part 1: Reference model
Technical Report New 8 IT-014 AUS Working Draft Dev
100553 TR 5823 E-health endpoint location service Technical Spec Revision 11 IT-014 AUS Working Draft Dev
7457 TR2.27 Alumina - Preparation and certification of ASCRM 027 Reference Material Other 2 MN-009 AUS Working Draft Dev
8484 1851 Maintenance of fire protection systems and equipment. Standard Revision 4 FP-001 AUS Consult & Resolve
100779 3001 Electrical installations (known as the Australian/New Zealand Wiring Rules)
Standard Revised Text Amendment
5 EL-001 JNT Working Draft Dev
Active and Approved Project Listingas at 23rd December 2011
Page 29
ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage
100781 3001 Electrical installations—Transportable structures and vehicles including their site supplies
Standard Revised Text Amendment
5 EL-001 JNT Working Draft Dev
100388 3010 Electrical installations - Generating sets Standard Revision 5 EL-001 JNT Working Draft Dev
100707 3837 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter.
Standard Revised Text Amendment
4 FP-018 JNT Pub Com Draft
100271 5376 Standard on Gender-inclusive Job Evaluation Standard New 12 MB-020 AUS Pub Com Draft
100417 5388.2 Analysis of Physical Material for Forensic Purposes Standard New 12 CH-041 AUS Pub Com Draft
100418 5388.3 Interpretation of Results from the Analysis of Physical Material for Forensic Purposes
Standard New 12 CH-041 AUS Working Draft Dev
100419 5388.4 Reporting Results and Conclusions from the Analysis of Physical Material for Forensic Purposes
Standard New 12 CH-041 AUS Team Establish
100708 9705 Fire tests - Full scale room test for surface products Standard Revision 4 FP-018 INT Working Draft Dev
Recommended