Page 108420PQQul 120iult1ag0yemge4n Page 1 8m08g0s ......inspection and testing of composite gas cylinders (ISO 11623:2002, MOD) Standard International Adoption - Modified 3 ME-002

Active and Approved Project Listingas at 23rd December 2011

Page 1

ID Standard Number Title Product Type Project Type Sector Committee Allocation Development Stage

100842 Quality management systems - Requirements Other Other 12 QR-008 JNT Approval & Publish

100445 AS 1085.14 Pre-stressed concrete sleepers Standard Revision 3 CE-002 AUS Consult & Resolve

100444 AS 1085.20 Welding of steel rails Standard Revision 3 CE-002 AUS Consult & Resolve

100762 AS 1085.21 Railway track material – Turnouts, switches and crossings Standard New 7 CE-002 AUS Team Establish

100716 AS 1141.24 Standard durability by exposure to sodium sulphate Standard Revision 4 CE-012 AUS Consult & Resolve

100683 AS 1141.3.1 Sampling of Aggregate Standard Revision 4 CE-012 AUS Consult & Resolve

100715 AS 1141.3.2 Sampling of rock spalls and boulders Standard Revision 4 CE-012 AUS Consult & Resolve

100718 AS 1141.60.1 Accelerated mortar bar test for assessment of alkali silica reaction in concrete aggregate

Standard New 4 CE-012 AUS Working Draft Dev

100719 AS 1141.60.2 Concrete prism test for assessment of alkali silica reaction in concrete aggregate

Standard New 4 CE-012 AUS Working Draft Dev

100717 AS 1141.66 Methylene blue value of fine aggregate Standard New 4 CE-012 AUS Consult & Resolve

100436 AS 1176.11 Playground equipment and surfacing Part 11: Additional specific safety requirements and test methods for spatial network

Standard New 9 CS-005 AUS Working Draft Dev

100798 AS 12239 Smoke alarms using scattered light, transmitted light or ionization Standard International Adoption - Modified

4 FP-002 AUS Team Establish

100785 AS 12647.1 Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 1: Parameters and measurement methods

Standard International Adoption - Identical

11 EX-004 AUS Working Draft Dev

100782 AS 12647.7 Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 7: Proofing processes wokring directly from digital data


11 EX-004 AUS Working Draft Dev

5457 AS 1317 Plastic Toilet Seats Standard Revision 6 WS-003 AUS Pub Com Draft

100415 AS 1375 Industrial Fuel Fired Appliances Standard Revision 7 AG-011 AUS Pub Com Draft

6072 AS 1418.15 Cranes, Hoists and winches - Part 15: Concrete placing equipment Standard Revision 3 ME-005 AUS Working Draft Dev

8578 AS 1418.5 Cranes, hoists and winches Part 5: Mobile cranes Standard Revision 3 ME-005 AUS Pub Com Draft

100391 AS 1428.2 Design for access and mobility - Wayfinding Standard Revision 4 ME-064 AUS Team Establish

100392 AS 1428.4.2 Design for access and mobility - Enhanced and additional requirements - Buildings and facilities

Standard Revision 4 ME-064 AUS Team Establish

100389 AS 1428.8 Design for access and mobility - Adaptable Housing Standard Revision 4 ME-064 AUS Team Establish


Page 2


100401 AS 1546.4 On-site domestic wastewater treatment units - Domestic Greywater Treatment Systems

Standard New 6 WS-013 AUS Working Draft Dev

100741 AS 1562.1 (Amd1) Design and installation of sheet roof and wall cladding - Metal Standard Revised Text Amendment

4 BD-014 AUS Working Draft Dev

100235 AS 1597.2 Revision of AS1597.2 “Precast reinforced concrete box culverts: Part 2 Large culverts”.

Standard Revision 4 CE-026 AUS Consult & Resolve

8091 AS 1636.1 Tractors - Roll-over protective structures - Criteria and tests - Conventional track tractors

Standard Revision 7 ME-065 AUS Pub Com Draft

8089 AS 1636.2 Tractors - Roll-over protection structures - Criteria and tests - Rear-mounted for narrow-track tractors


8090 AS 1636.3 Tractors - Roll-over protection structures - Criteria and tests - Front-mounted for narrow-track tractors


1488 AS 1657 Fixed platforms, walkways, stairways and ladders - Design, construction and installation Part 1: Requirements for general applications

Standard Revision 4 SF-013 AUS Pub Com Draft

7761 AS 1668.2 The use of ventilation and air-conditioning in buildings Part 2: Ventilation design for indoor air contaminant control.

Standard Revision 3 ME-062 AUS Working Draft Dev

100980 AS 1668.4 Natural Ventilation of Buildings Standard Revision 3 ME-062 AUS Working Draft Dev

100799 AS 1670.1 Fire detection, warning, control and intercom systems Standard Revision 4 FP-002 AUS Team Establish

100800 AS 1670.4 Fire detection, warning, control and intercom systems - Commissioning Standard Revision 4 FP-002 AUS Team Establish

100757 AS 1670.4 Fire detection, warning, control and intercom systems - System design, installation and commissioning - Sound systems and intercom systems for emergency purposes

Standard International Adoption - Modified

12 FP-002 AUS Working Draft Dev

1166 AS 1682.1 Fire/smoke damper-Specification (ME/062-0580) Standard Revision 3 ME-062 AUS Consult & Resolve

1165 AS 1682.2 Fire/smoke damper-Installation (ME/062-0570) Standard Revision 3 ME-062 AUS Consult & Resolve

100970 AS 1684 Residential timber-framed construction Standard Correction Amendment

4 TM-002 AUS Consult & Resolve

100971 AS 1684.2 Residential timber-framed construction Part 2: Non-cyclonic areas Standard Correction Amendment


100972 AS 1684.3 Residential timber-framed construction Part 3: Cyclonic areas Standard Correction Amendment



Page 3


100973 AS 1684.4 Residential timber-framed construction Part 4: Simplified—Non-cyclonic areas

Standard Correction Amendment


100884 AS 1742.1 Manual of uniform traffic control devices Parts 1: General introduction and index of signs

Standard Revision 7 MS-012 AUS Team Establish

100885 AS 1742.14 Manual of uniform traffic control devices Part 14: Traffic signal Standard Revision 7 MS-012 AUS Team Establish

100886 AS 1742.6 Manual of uniform traffic devices Part 6: Tourist and services signs Standard Revision 7 MS-012 AUS Team Establish

100887 AS 1742.7 Manual of uniform traffic devices Part 7: Railway crossings Standard Revision 7 MS-012 AUS Team Establish

100888 AS 1743 Road signs - Specifications Standard Revision 7 MS-012 AUS Team Establish

100889 AS 1744 Standard alphabets for road signs Standard Revision 7 MS-012 AUS Team Establish

100912 AS 1766.1.6 Food microbiology, Method 1.6: General procedures and techniques - Estimation of most probable number (MPN) of microorganisms

Standard Revision 1 FT-024 AUS Team Establish

100917 AS 1766.3.1 Food microbiology, Method 3.1: Examination of specific products - Meat and meat products other than poultry

Standard Withdrawal 1 FT-024 AUS Team Establish

100916 AS 1766.3.15 Food microbiology, Method 3.15: Examination of specific products - Cheese

Standard Revision 1 FT-024 AUS Team Establish

100918 AS 1766.5 Food microbiology, Method 5: Preparation of culture media, diluents and reagents

Standard Withdrawal 1 FT-024 AUS Team Establish

100178 AS 1884 Floorcoverings Resilient Sheet and Tiles Standard Revision 3 PL-015 AUS Consult & Resolve

100999 AS 1900 Flotation aids for water familiarization and swimming tuition Standard Revision 9 CS-021 AUS Team Establish

100348 AS 1915 Electrical equipment for explosive atmospheres - Battery-operated vehicles

Standard Revision 5 EL-014 AUS Team Establish

100821 AS 1915 Powered industrial trucks - Part 12: Operating in hazardous Areas Standard Revision 3 ME-026 AUS Team Establish

5525 AS 2047 External Windows and Doors In Buildings - Performance Specifications Standard Revision 4 BD-021 AUS Pub Com Draft

100817 AS 2067 Substations and HV Installations greater than 1kV ac Standard Revision 5 EL-043 AUS Team Establish

6301 AS 2118.4 Automatic fire sprinkler systems, Part 4 Residential sprinkler systems Standard Revision 4 FP-004 AUS Balloting

5293 AS 2118.6 Automatic fire sprinkler systems, Part 6: Combined sprinkler and hydrant

Standard Revision 4 FP-004 AUS Balloting

100398 AS 2252.5 Controlled environments - Design, installation and use of cytotoxic drug safety cabinets



Page 4


7217 AS 2278.2 Aerosol containers, Part 2: Plastics aerosol dispensers of capacity 50 mL to 1000 mL inclusive

Standard Revision 3 PK-013 AUS Working Draft Dev

101034 AS 2290.3 Electrical equipment for coal mines - Maintenance and overhaul - Maintenance of gas detecting and monitoring equipment

Standard Revision 2 EL-023 AUS Working Draft Dev

100756 AS 2321 Short-link chain for lifting purposes Standard Revision 3 ME-025 AUS Working Draft Dev

100793 AS 2337.3 Gas cylinder test stations Part 3: Transportable gas cylinders—Periodic inspection and testing of composite gas cylinders (ISO 11623:2002, MOD)


3 ME-002 AUS Pre-Assignment

100455 AS 2359.1 Powered industrial trucks - General Requirements Standard Revision 7 ME-026 AUS Working Draft Dev

100456 AS 2359.2 Powered industrial trucks - General Requirements Standard Revision 7 ME-026 AUS Pub Com Draft

100824 AS 2359.6 Powered industrial trucks - Safety requriements and verification Part 6: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks.


8597 AS 2419.1 Fire Hydrants -System Design & Installations Standard Revision 4 FP-009 AUS Working Draft Dev

100458 AS 2419.3 Fire Hydrant Installations - Part 3 Fire brigade booster connections Standard Revision 4 FP-009 AUS Pub Com Draft

100794 AS 2473.2 Valves for compressed gas cylinders Part 2: Outlet connections (threaded) and stem (inlet) threads


6155 AS 2550.15 Cranes, hoists and winches - Safe use, Part 15: Concrete placing equipment


100720 AS 2758.1 Aggregate and rock for engineering purposes - Part 1 Concrete Aggregate

Standard Revision 4 CE-012 AUS Working Draft Dev

100990 AS 2832.1 Cathodic protection of metals, Part 1: Pipes and cables Standard Revision 3 MT-014 AUS Team Establish

101000 AS 2885.0 Gas and Liquid Petroleum, Part 0: General Requirements Standard Revised Text Amendment

5 ME-038 AUS Team Establish

100302 AS 2885.1 Pipelines - gas and liquid petroleum Part 1: Design and construction Standard Revision 5 ME-038 AUS Working Draft Dev

5579 AS 2885.3 Pipelines - Operation and Maintenance Standard Revision 5 ME-038 AUS Balloting

100926 AS 2891.1.1 Methods of sampling and testing asphalt - Sampling - Loose asphalt Standard Revision 3 CE-006 AUS Team Establish

100933 AS 2891.12.1 Methods of sampling and testing asphalt - Determination of the permanent compressive strain characteristics of asphalt - Dynamic creep test

Standard Revision 4 CE-006 AUS Team Establish

100854 AS 2941 Fixed fire protection installations – Pumpset systems Standard Revision 3 FP-008 AUS Team Establish


Page 5


100278 AS 3533.1 Amusement rides and devices - Operation and Maintenance Standard Revised Text Amendment

12 ME-051 AUS Pub Com Draft

100291 AS 3533.2 Amusement rides and devices - Design and Construction Standard Revised Text Amendment

12 ME-051 AUS Pub Com Draft

100277 AS 3533.4.2 Concessional Karting Code of Practice Standard New 12 ME-051 AUS Pub Com Draft

100879 AS 3533.4.2 Amusement rides and devices – Part 4.2: Specific requirements – Contained play facilities

Standard New 12 ME-051 AUS Team Establish

100107 AS 3566.2 Revision of AS 3566.2 Corrosion Performance of Steel Fasteners Standard Revision 3 ME-029 AUS Balloting

100816 AS 3580.11.1 Methods for sampling and analysis of ambient air - Determination of volatile organic compounds - Methane and non-methane volatile organic compounds - Direct-reading instrumental method

Standard Revision 5 EV-007 AUS Team Establish

4754 AS 3600 Concrete Structures - Supplement Commentary Other 4 BD-002 AUS Pub Com Draft

100836 AS 3660.1 Termite management - New building work Standard Revision 4 BD-094 AUS Working Draft Dev

100837 AS 3660.2 Termite management - In and around existing buildings and structures - Guidelines

Standard Revision 4 BD-094 AUS Working Draft Dev

100838 AS 3660.3 Termite management - Assessment criteria for termite management systems


100250 AS 3688 Amendment to AS 3688:2005 Standard Revision 6 WS-001 AUS Project Planning

100818 AS 3700 SUPP 1 Masonry structures – Commentary (Supplement to AS 3700-2011) Supplement Revision 4 BD-004 AUS Team Establish

100459 AS 3705 Geotextiles - Identification, marking, and general data Standard Revision 4 CE-020 AUS Working Draft Dev

100460 AS 3706.1 Geotextiles - Methods of test - General requirements, sampling, conditioning, basic physical properties and statistical analysis


100469 AS 3706.10.1 Geotextiles - Methods of test - Determination of transmissivity - Radial method


100470 AS 3706.11 Geotextiles - Methods of test - Determination of durability - Resistance to degradation by light, heat and moisture


100471 AS 3706.13 Geotextiles - Methods of test - Determination of durability - Resistance to certain microbiological agents


100461 AS 3706.2 Geotextiles - Methods of test - Determination of tensile properties - Wide-strip method



Page 6


100462 AS 3706.3 Geotextiles - Methods of test - Determination of tearing strength - Trapezoidal method


100463 AS 3706.4 Geotextiles - Methods of test - Determination of burst strength - California bearing ratio (CBR)


100464 AS 3706.5 Geotextiles - Methods of test - Determination of puncture resistance - Drop cone method


100465 AS 3706.6 Geotextiles - Methods of test - Determination of seam strength Standard Revision 4 CE-020 AUS Working Draft Dev

100466 AS 3706.7 Geotextiles - Methods of test - Determination of pore-size distribution - Dry-sieving method


100467 AS 3706.9 Geotextiles - Methods of test - Determination of permittivity, permeability and flow rate


100760 AS 3775.1 Chain slings - Grade T - Product specification Standard Revision 3 ME-025 AUS Working Draft Dev

100759 AS 3775.2 Chain slings - Grade T - Care and use Standard Revision 3 ME-025 AUS Working Draft Dev

100761 AS 3776 Lifting components for Grade T chain slings Standard Revision 3 ME-025 AUS Working Draft Dev

100430 AS 3850.1 Precast and Tilt-Up Concrete Elements in Building Construction - part 1 General Requirements


100664 AS 3850.2 Precast and Tilt-Up Concerete Elements in Building Construction - Part 2 Precast and Tilt-up Concrete Panels


100421 AS 3920 Pressure Equipment - Conformity Assessment Standard Revision 3 ME-001 AUS Working Draft Dev

100320 AS 3999-1992 Thermal insulation of dwellings - Bulk insulation - Installation requirements

Standard Revised Text Amendment

4 BD-058 AUS Consult & Resolve

100322 AS 3999-1992 Thermal insulation of dwellings - Bulk insulation - Installation requirements

Standard Revision 4 BD-058 AUS Team Establish

100663 AS 4032.4 Thermostatic Mixing Taps - Materials, Design and Performance Requirements

Standard New 6 WS-026 AUS Working Draft Dev

100967 AS 4055 Wind loads for housing Standard Revision 4 BD-099 AUS Working Draft Dev

100751 AS 4069 Bathseats – Product requirements - Requirements and test methods Standard Revision 8 ME-067 AUS Team Establish

100228 AS 4084 Steel Storage Racking Standard Revision 4 BD-062 AUS Consult & Resolve

100394 AS 4100 Steel structures Standard Revised Text Amendment

4 BD-001 AUS Pub Com Draft


Page 7


100446 AS 4145.5 - BS EN 1154 MOD

Controlled Door Closing Devices Standard Other 3 CS-082 AUS Consult & Resolve

100393 AS 4181 Repair and Off-take clamps for Waterworks purposes Standard Revision 6 WS-016 AUS Working Draft Dev

7919 AS 4254.1 Ductwork for air-handling systems in buildings, Part 1: Flexible duct Standard Revision 3 ME-062 AUS Consult & Resolve

4005 AS 4254.2 Ductwork for air-handling systems in buildings, Part 2: Rigid duct Standard Revision 3 ME-062 AUS Working Draft Dev

100758 AS 4428.4 Fire detection, warning, control and intercom systems - Control and indicating equipment - Intercommunication systems for emergency purposes

Standard Revision 12 FP-002 AUS Working Draft Dev

100016 AS 4454 Compost, soil conditioners and mulches Standard Revision 9 CS-037 AUS Approval & Publish

100468 AS 4551 Domestic gas cooking appliances Standard Revision 5 AG-001 AUS Team Establish

100473 AS 4552 Gas fired water heaters for hot water supply and/or central heating Standard Revision 5 AG-001 AUS Team Establish

100011 AS 4552.3 Methods of test for energy efficiency of gas-fired water heaters Standard New Standard 5 AG-001 AUS Working Draft Dev

100474 AS 4554 Gas laundry dryers Standard Revision 5 AG-001 AUS Team Establish

100476 AS 4557 Domestic outdoor gas barbecues Standard Revision 5 AG-001 AUS Team Establish

100477 AS 4560 Gas pool heaters Standard Revision 5 AG-001 AUS Team Establish

100480 AS 4563 Commercial catering gas equipment Standard Revision 5 AG-001 AUS Team Establish

100449 AS 4606 Fire resistant and antistatic requirements for conveyor belting used in underground coal mines

Standard Revision 2 RU-002 AUS Working Draft Dev

100486 AS 4643 Overhead radiant tube gas heaters Standard Revision 5 AG-001 AUS Team Establish

100483 AS 4646 Gas appliance standards - Definitions and calculations Standard Revision 5 AG-001 AUS Team Establish

100810 AS 4654.1 Waterproofing membrane systems for exterior use - Above ground level materials

Standard Revision 4 BD-013 AUS Pub Com Draft

100811 AS 4654.2 Waterproofing membrane systems for exterior use - Above ground level - Design and installation


100648 AS 4773.1 Masonry in small buildings - Design Standard Correction Amendment

4 BD-004 AUS Balloting

8904 AS 4980.1 Digital radio-Requirements for receivers Standard New Standard 11 CT-002 AUS Working Draft Dev

100812 AS 4989 Trampolines— Safety aspects Standard Revision 12 CS-100 AUS Team Establish

100292 AS 5100.1 Bridge Design - Scope and General Principles Standard Revision 4 BD-090 AUS Pub Com Draft


Page 8


100693 AS 5100.1 Bridge design - Scope and general principles - Commentary (Supplement to AS5100.1 - 2004)


100297 AS 5100.2 Bridge Design - Design Loads Standard Revision 4 BD-090 AUS Pub Com Draft

100694 AS 5100.2 Bridge design - Design loads - Commentary (Supplement to AS 5100.2 2004)


100293 AS 5100.3 Bridge Design - Foundations and soil supporting structures Standard Revision 4 BD-090 AUS Pub Com Draft

100695 AS 5100.3 Bridge design - Foundations and soil supporting structures (Supplement to AS 5100.3)


100295 AS 5100.4 Bridge Design - Bearing and Deck Joints Standard Revision 4 BD-090 AUS Pub Com Draft

100696 AS 5100.4 Bridge design - Bearings and deck joints - Commentary (Supplement to AS 5100.4 - 2004)


100298 AS 5100.5 Bridge Design - Concrete Standard Revision 4 BD-090 AUS Pub Com Draft

100700 AS 5100.5 Bridge design - Concrete Standard Revision 4 BD-090 AUS Pub Com Draft

100296 AS 5100.6 Bridge Design - Steel and Composite Construction Standard Revision 4 BD-090 AUS Pub Com Draft

100697 AS 5100.6 Bridge design - Steel and composite construction - Commentary (Supplement to AS 5100-6 - 2004)


100294 AS 5100.7 Bridge Design - Rating of existing Bridges Standard Revision 4 BD-090 AUS Pub Com Draft

100698 AS 5100.7 Bridge design - Rating of existing bridges - Commentary (Supplement to AS 5100.7 - 2004)


7497 AS 5200.464 Hot water manual or sensor-activated pumping systems Standard Revision 6 WS-026 AUS Consult & Resolve

100071 AS 5239 Examination of Ignitable Liquids in Fire Debris Standard New 3 CH-041 AUS Approval & Publish

100286 AS 5334 New Australian Standard - Principle Based Climate Change Adaptation - Requirements for Settlements and Infrastructure

Standard New 4 BD-103 AUS Consult & Resolve

100416 AS 5388.1 Recognition, Recording, recovery and Storage of Physical Material for Forensic Purposes

Standard New 12 CH-041 AUS Pub Com Draft

100301 AS 5478 National recordkeeping metadata element set Standard New 11 IT-021 AUS Consult & Resolve

100420 AS 5481 Standard Practice for the Manufacture of Products Used in the Collection of Biological Material for Forensic DNA Analysis

Standard New 12 CH-041 AUS Working Draft Dev

100020 AS 5830.1 Technical specification for plumbing and drainage products - In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic. Part A: Metal Bodied

Standard New 6 WS-022 AUS Balloting


Page 9


100167 AS 5830.2 Technical specification for plumbing and drainage products - In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic. Part B: Plastic Bodied

Standard New 6 WS-022 AUS Approval & Publish

100438 AS 6000-2009 Organic and biodynamic products Standard Revised Text Amendment

1 FT-032 AUS Working Draft Dev

100354 AS 60038 Standard voltages Standard Revision 5 EL-034 AUS Working Draft Dev

100965 AS 60044.1-2007/Cor 1 Instrument transformers Part 1: Current transformers


11 EL-013 AUS Approval & Publish

100767 AS 62040.3 Uninterruptible power systems (UPS) - Method of specifying the performance and test requirements


5 EL-027 AUS Team Establish

100822 AS 62430 Environmentally conscious design for electrical and electronic products Standard International Adoption - Identical


101014 AS ISO 14171 TBA Standard International Adoption - Modified

3 WD-002 AUS Team Establish





100955 AS ISO 15189 Medical laboratories -- Requirements for quality and competence Standard International Adoption - Identical

8 HE-029 AUS Team Establish

101029 AS ISO 16175.1 ISO16175-1 Information and documentation - Principles and functional requirements for records in electronic office environments - Part 1: Overview and statement of principles. International Organisation for Standardization.


11 IT-021 AUS Team Establish

101030 AS ISO 16175.2 Information and documentation - Principles and functional requirements for records in electronic office environments - Part 2: Guidelines and functional requirements for digital records management systems



101031 AS ISO 16175.3 Information and documentation - Principles and functional requirements for records in electronic office environments - Part 3: Guidelines and functional requirements for records in business systems






Page 10








100754 AS ISO 7240.16 Fire detection and alarm systems - Part 16: Sound System Control and Indicating Equipment



100981 AS ISO 7240.16 Fire detection and alarm systems -- Part 16: Sound system control and indicating equipment


12 FP-002 INT Team Establish

100795 AS ISO 7240.20 Fire detection and alarm systems - Part 20: Aspirating smoke detectors Standard International Adoption - Modified


100755 AS ISO 7240.24 Fire detection and fire alarm systems - Part 24: Sound system loudspeakers



101021 AS ISO/IEC 27005 Information technology ― Security techniques — Information security risk management



101025 AS ISO/IEC 27037 Information technology — Security techniques — Guidelines for identification, collection, acquisition, and preservation of digital evidence.



100274 AS NZS 4505 Domestic Garage Doors Standard Revision 4 BD-014 AUS Consult & Resolve

100892 AS NZS IEC 62271-1 High-voltage switchgear and controlgear - Part 1: Common specifications

Standard Other 5 EL-007 AUS Working Draft Dev

100893 AS NZS IEC 62271-203 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV

Standard Other 5 EL-007 AUS Working Draft Dev

100424 AS NZS ISO 7176-4:201X Wheelchairs - Determination of energy consumption of electric wheelchairs


8 ME-067 JNT Balloting

100431 AS NZS ISO 8124.3 Safety of toys - Migration of certain elements Standard Other 9 CS-018 JNT Approval & Publish

100752 AS NZS ISO 9999:201X Assistive products for persons with disability - Classification and terminology



100217 AS XXXX Gas Appliance Standards - Part 0 Safety Requirements Standard New 5 AG-001 AUS Working Draft Dev

100797 AS/NZ ISO 19101-2 Geographic Information/Geomatics - Reference Model – Part 2: Imagery

Technical Spec New 11 IT-004 JNT Balloting


Page 11


100328 AS/NZS Solar thermal cooling systems – Energy rating and testing for performance

Standard New 5 CS-028 JNT Working Draft Dev

100507 AS/NZS Standard Guidelines for Subsurface Utility Engineering (SUE) in Australia and New Zealand

Standard New 12 IT-036 JNT Working Draft Dev

100894 AS/NZS Plugs and socket-outlets for household and similar electrical appliances - Part 1: General requirements


5 EL-004 JNT Working Draft Dev

100450 AS/NZS 1080.1 Timber - Methods of test - Part 1: Moisture Content Standard Revision 3 TM-003 JNT Working Draft Dev

100966 AS/NZS 1170.2 Structural design actions - Wind actions Standard Revised Text Amendment

4 BD-006 JNT Working Draft Dev

100987 AS/NZS 1170.2 Structural design actions - Wind actions Standard Correction Amendment

4 BD-006 JNT Working Draft Dev

100356 AS/NZS 1249-20XX Children's nightwear and limited daywear having reduced fire hazard Standard Revision 9 CS-086 JNT Working Draft Dev

100771 AS/NZS 1337.1 Personal eye protection - Eye and face protectors for occupational applications


12 SF-006 JNT Pub Com Draft

100772 AS/NZS 1337.2 Peronal eye protection - Mesh eye and face protectors Standard International Adoption - Modified

12 SF-006 AUS Working Draft Dev

100769 AS/NZS 1337.6 Personal eye protection - Prescription eye protectors against low and medium impact

Standard Revision 12 SF-006 JNT Pub Com Draft

100774 AS/NZS 1338.1 Filters for eye protectors - Filters for protection against radiation generated in welding and allied operations

Standard Revision 12 SF-006 AUS Working Draft Dev

100775 AS/NZS 1338.2 Filters for eye protectors - Filters for protection against ultraviolet radiation


100940 AS/NZS 1338.3 Filters for eyeprotectors- Filters for protection against infra-red radiation Standard Revision 12 SF-006 AUS Working Draft Dev

5292 AS/NZS 1359.5 Three-phase cage induction motors - High efficiency and minimum energy performance standards (MEPS) requirements

Standard Revision 5 EL-009 JNT Working Draft Dev

100528 AS/NZS 1359.5 Rotating electrical machines - General requirements, Part 5: Three-phase cage induction motors - High efficiency and minimum energy performance standards requirements



100414 AS/NZS 1425 LP Gas Fuel Systems for Vehicle Engines Standard Revision 7 ME-046 JNT Working Draft Dev

100290 AS/NZS 1547 On-site domestic wastewater management Standard Revision 6 WS-013 JNT Balloting

100390 AS/NZS 1554.6 Structural steel welding - Welding stainless steels for structural purposes

Standard Revision 3 WD-003 JNT Consult & Resolve


Page 12


100299 AS/NZS 1576.3 Scaffolding - Prefabricated and tube-and-coupler scaffolding Standard Revision 4 BD-036 JNT Pub Com Draft

100300 AS/NZS 1576.4 Scaffolding - Suspended scaffolding Standard Revision 4 BD-036 JNT Pub Com Draft

100744 AS/NZS 1604.1 Specification for preservative treatment - Sawn and round timber Standard Revised Text Amendment

4 TM-006 JNT Team Establish

100943 AS/NZS 1604.2 Specification for preserve treatment- Reconstitutted wood-based products



100984 AS/NZS 1604.3 Specification for preservative treatment - Plywood Standard Revised Text Amendment


100945 AS/NZS 1604.4 Specification for Preserve Treatment- Laminated Veneer lumber (LVL) Standard Revised Text Amendment


100946 AS/NZS 1604.5 Specification for Preservative treatment- Glued laminated timber products

Standard Revision 4 TM-006 JNT Team Establish

100447 AS/NZS 1677.1 Refrigerating systems - Refrigerant classification Standard Other 3 ME-006 JNT Working Draft Dev

100448 AS/NZS 1677.2 Definition, classification and selection criteria Standard Revision 3 ME-006 JNT Working Draft Dev

8994 AS/NZS 1680.5 Interior and workplace lighting, Outdoor Work Places Standard New 5 LG-001 JNT Pub Com Draft

100969 AS/NZS 1698 Protective helmets for vehicle users Standard Revised Text Amendment

9 CS-076 JNT Consult & Resolve

100279 AS/NZS 1716 Respiratory protective devices Standard Revision 12 SF-010 JNT Consult & Resolve

100440 AS/NZS 1754 Child restraint systems for use in motor vehicles Standard Revision 7 CS-085 JNT Working Draft Dev

100913 AS/NZS 1766.1.4 Food microbiology, Method 1.4: General procedures and techniques - Colony count - Surface spread method

Standard Revision 1 FT-024 JNT Team Establish

100911 AS/NZS 1766.2.12 Food microbiology, Method 1.12: Examination for specific organisms - Escherichia coli in bivalve molluscs - Rapid method


100915 AS/NZS 1766.3.14 Food microbiology, Method 3.14: Examination of specific products - Butter, margarine and related products


100914 AS/NZS 1766.3.5 Food microbiology, Method 3.5: Examination of specific products - Molluscs, crustaceans and fish, and products thereof


100502 AS/NZS 1768 Lightning protection Standard Revision 5 EL-024 JNT Working Draft Dev

100237 AS/NZS 1869 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas

Standard Revision 5 AG-013 JNT Consult & Resolve

100989 AS/NZS 2144 Traffic Signal Lanterns Standard Revision 7 LG-006 JNT Team Establish


Page 13


8203 AS/NZS 2208 Safety glazing materials in buildings Standard Revision 3 BD-007 JNT Pub Com Draft

100381 AS/NZS 2229 Fuel dispensing equipment for explosive atmospheres Standard Revision 5 EL-014 JNT Working Draft Dev

100478 AS/NZS 2290.1 Electrical equipment for coal mines - Introduction and maintenance - For hazardous areas


100996 AS/NZS 2312 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings

Standard Revision 3 MT-014 JNT Team Establish

3967 AS/NZS 2604 Sunscreen products--Evaluation and classification Standard Revision 9 CS-042 JNT Consult & Resolve

7994 AS/NZS 2885.5 Pipelines - Gas and liquid petroleum - Field pressure testing Standard Revision 5 ME-038 JNT Consult & Resolve

100935 AS/NZS 2891.14.1.1 Methods of sampling and testing asphal;t- Field density tests- Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge- Direct transmission mode

Standard Revision 4 CE-006 JNT Team Establish

100937 AS/NZS 2891.14.2 Methods of sampling and testing asphalt - Field density tests- Determination of field density of compacted asphalt using a nuclear thin-layer density gauge


100939 AS/NZS 2891.14.4 Methods of sampling and testing asphalt- Field density tests- Calibration of nuclear surface moisture density gauge- Backscatter mode


100930 AS/NZS 2891.3.1 Methods of sampling ans testing asphalt- Bitumen content and aggregate grading- Centrifugal extraction method


100931 AS/NZS 2891.3.2 Methods of sampling and testing asphalt- Bitumen content and aggregate grading- centrifugal extraction method


100484 AS/NZS 3007 Electrical installations - Surface mines and associated processing plant - Scope and definitions

Standard Revision 2 EL-023 JNT Pub Com Draft

7731 AS/NZS 3018 Electrical installations - Domestic installations Standard Revision 5 EL-001 JNT Working Draft Dev

100402 AS/NZS 3080:2003 Information technology - Generic cabling for customer premises Standard Revision 11 CT-001 JNT Pub Com Draft

100975 AS/NZS 3102:2002 A3 Approval and test specification – Electric duct heaters Standard Revised Text Amendment

5 EL-002 JNT Pub Com Draft

100316 AS/NZS 3105 Approval and test specification—Electrical portable outlet devices Standard Revised Text Amendment

5 EL-004 JNT Team Establish

100317 AS/NZS 3133 Amdt 2 Approval and test specification - Air-break switches Other Revised Text Amendment

5 EL-004 JNT Approval & Publish


Page 14


100705 AS/NZS 3500.2:2003/Amd 4 AS/NZS 3500 – Plumbing And Drainage Standard Revised Text Amendment

6 WS-014 JNT Balloting

100982 AS/NZS 3500.3 Plumbing and Drainage - Stormwater Drainage Standard Revised Text Amendment

6 WS-014 JNT Team Establish

7088 AS/NZS 3500.5 AS/NZS 3500.5 Plumbing and drainage - Domestic installations Standard Revision 6 WS-014 JNT Pub Com Draft

7894 AS/NZS 3551 Amendment 2 to AS/NZS 3551:05 Technical management programs for medical devices

Standard New 8 HE-003 JNT Consult & Resolve

100815 AS/NZS 3580 Methods for sampling and analysis of ambient air Method -Determination of suspended particulate matter—PM2.5

Standard New 5 EV-007 JNT Team Establish

100745 AS/NZS 3580.13.2 Measurement of fluorides and directional dust in ambient air Standard Revision 1 EV-007 JNT Team Establish

7743 AS/NZS 3584.3 Maintenance of diesel engine systems for underground coal mines Standard Revision 2 ME-018 JNT Approval & Publish

100441 AS/NZS 3629.A, B, C… Methods of testing child restraints Standard Revision 7 CS-085 JNT Project Planning

7052 AS/NZS 3695.1 Manual Wheelchairs - product requirements Standard Revision 8 ME-067 JNT Consult & Resolve

7053 AS/NZS 3695.2 Wheelchairs - Electrically powered wheelchairs and their chargers Standard Revision 8 ME-067 AUS Working Draft Dev

100403 AS/NZS 3696.11 Wheelchairs - Test dummies Standard International Adoption - Identical

8 ME-067 JNT Team Establish

100426 AS/NZS 3696.16 Wheelchairs - resistance to ignition of postural supports - requirements & test methods



100425 AS/NZS 3696.5 Wheelchairs - Determination of overall dimensions, mass and turning space



100427 AS/NZS 3696.8 Wheelchairs - Requirements & test methods for static, impact & fatigue strength



100287 AS/NZS 3760:20XX In-service safety inspection and testing of electrical equipment Standard Revision 3 EL-036 JNT Balloting

5544 AS/NZS 3785.6 Guides and rubbing ropes for conveyances Standard Revision 2 ME-018 JNT Working Draft Dev

100495 AS/NZS 3785.8 Underground mining - Shaft equipment - Personnel conveyances in other than vertical shafts

Standard Revision 2 ME-018 JNT Working Draft Dev

100479 AS/NZS 3800 Electrical equipment for explosive atmospheres - Repair and overhaul Standard Revision 2 EL-023 JNT Consult & Resolve

100976 AS/NZS 3820 AMD 1 Essential safety requirements for electrical equipment Standard Correction Amendment

12 QR-012 JNT Pub Com Draft

100882 AS/NZS 3845.1 Roadside safety systems and devices - Barrier systems Standard Revision 7 CE-033 JNT Team Establish


Page 15


100881 AS/NZS 3845.2 Roadside safety systems and devices - Temporary work sites, bollards, light poles and sign supports

Standard New 7 CE-033 JNT Team Establish

100706 AS/NZS 3879 Solvent Cements and Priming Fluids for PVC and ABS Pipe Fittings Standard Revision 6 PL-021 JNT Working Draft Dev

8803 AS/NZS 4067 Protective helmets - firefighters Standard Revision 12 SF-049 JNT Pub Com Draft

100397 AS/NZS 4187 Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities

Standard Revision 8 HE-023 JNT Working Draft Dev

100814 AS/NZS 4200.2 Pliable building membranes and underlays - Part 2: Installation requirements

Standard Revision 4 BD-058 JNT Team Establish

100475 AS/NZS 4240.3 Standards for Mining Electrical Equipment including hazardous areas equipment.

Standard Revision 2 EL-023 JNT Pub Com Draft

100789 AS/NZS 4268 Radio equipment and systems - Short range devices - Limits and methods of measurements

Standard Revision 11 RC-006 JNT Working Draft Dev

100442 AS/NZS 4370 Restraint of children with disabilities in motor vehicles Standard Revision 7 CS-085 JNT Project Planning

100840 AS/NZS 4386.1 Domestic kitchen assemblies - Kitchen units Standard Revision 4 BD-089 JNT Team Establish

100841 AS/NZS 4386.2 Domestic kitchen assemblies - Installation Standard Revision 4 BD-089 JNT Team Establish

100674 AS/NZS 4417.1 Regulatory compliance mark for electrical and electronic equipment Part 1: Use of the mark

Standard Revision 5 QR-012 JNT Consult & Resolve

100675 AS/NZS 4417.2 Marking of electrical and electronic products to indicate compliance with regulations Part 2: Specific requirements for particular regulatory applications

Standard Revision 5 QR-012 JNT Consult & Resolve

100753 AS/NZS 4487 Condensed Aerosol Fire Extinguishing Systems Standard Revision 4 FP-011 JNT Team Establish

100686 AS/NZS 4582:2004 MF/HF radiotelephone equipment Standard Reconfirmation 11 RC-004 JNT Approval & Publish

8112 AS/NZS 4586 Slip resistance of new pedestrian surface material Standard Other 4 BD-094 JNT Working Draft Dev

100750 AS/NZS 4602.2 High Visibility Garments for Fire Service Personnel Standard New 12 SF-004 JNT Working Draft Dev

101035 AS/NZS 4641 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels - General requirements and test methods


100951 AS/NZS 4645.3 AMD 2 Gas distribution networks-Part 3: Plastics pipes systems Standard Correction Amendment

5 AG-008 JNT Consult & Resolve

8113 AS/NZS 4663 Slip resistance measurement in existing pedestrian surfaces Standard Revision 4 BD-094 JNT Working Draft Dev

100273 AS/NZS 4666 Insulating Glass Units Standard Revision 4 BD-007 JNT Consult & Resolve


Page 16


100494 AS/NZS 4730.3 Mining - Winding equipment - Part 3: Mechanical Brakes Standard New 2 ME-018 AUS Working Draft Dev

100497 AS/NZS 4730.4 Mining—Winding equipment - Drum assemblies Standard New 3 ME-018 AUS Working Draft Dev

100496 AS/NZS 4730.5 AS 4730-5 Mining - Winding equipment - Part 5: Winder control systems

Standard New 2 ME-018 AUS Working Draft Dev

100383 AS/NZS 4745 Code of practice for handling combustible dusts Standard Revision 5 MS-011 JNT Team Establish

100386 AS/NZS 4777.1 Grid connection of energy systems via inverters - installation requirements


100387 AS/NZS 4777.2 Grid connection of energy systems via inverters - inverter and grid connection requirements


100986 AS/NZS 4847.2 AMD 1 Self Ballasted lamps for general lighting services Standard Correction Amendment

5 EL-041 JNT Consult & Resolve

100988 AS/NZS 4847.2 AMDT 1 Self ballasted lamps for general lighting services - Minimum Energy Performance Standards (MEPS) requirements of Document


5 EL-041 JNT Approval & Publish

7730 AS/NZS 4853 Electrical hazards on metallic pipelines Standard Revision 5 EL-001 JNT Balloting

100481 AS/NZS 4871.1 Electrical equipment for mines and quarries - General requirements Standard Revised Text Amendment

2 EL-023 JNT Pub Com Draft

100482 AS/NZS 4871.6 Earth-moving machinery and ancillary equipment for use in mines - Electrical wiring systems at extra-low voltage and AS/NZS 4871.6 Electrical equipment for coal mines, for use underground - Diesel powered machinery and ancillary equipment



7192 AS/NZS 5026 The storage and handling of Class 4 dangerous goods Standard New 3 CH-009 JNT Pub Com Draft

100385 AS/NZS 5033 Installation of photovoltaic (PV) arrays Standard Revision 5 EL-042 JNT Consult & Resolve

100327 AS/NZS 5347 Residential airconditioning systems – Minimum application requirements for energy efficiency

Standard New 5 EE-001 JNT Working Draft Dev

100746 AS/NZS 5601.1 Gas Installations – Part 1 - General Installations Standard Revision 5 AG-006 JNT Team Establish

100748 AS/NZS 5601.2 Gas installations - Part 2 - LP Gas installations in caravans and boats for non-propulsive purposes

Standard Revision 5 AG-006 JNT Team Establish

100765 AS/NZS 60065-2011 Audio, video and similar electronic apparatus - Safety requirements Standard New 5 TE-001 JNT Working Draft Dev

100807 AS/NZS 60076.1 Power transformers - Part 1: General Standard Revision 5 EL-008 JNT Working Draft Dev

100805 AS/NZS 60076.2 Power transformers - Part 2: Temperature rise for liquid-immersed transformers



Page 17


100803 AS/NZS 60076.5 Power Transformers – Part 5: Ability to withstand short circuit Standard Revision 5 EL-008 JNT Working Draft Dev

100806 AS/NZS 60076.6 Power transformers - Part 6: Reactors Standard Revision 5 EL-008 JNT Working Draft Dev

100804 AS/NZS 60076.7 Power transformers - Part 7: Loading guide for oil-immersed power transformers


7918 AS/NZS 60076.99 Revision of AS/NZS 60076.99 - Power transformers, Part 99: Minimum Energy Performance Standard (MEPS) requirements for distribution transformers

Standard New Standard 5 EL-008 JNT Working Draft Dev

100342 AS/NZS 60079-0 ED 3.0 Interpretation sheet 1 - Electrical apparatus for explosive gas atmospheres - General requirements

Ruling Other 5 EL-014 JNT Team Establish

100362 AS/NZS 60079-19 Ed 3 Explosive atmospheres - Equipment repair, overhaul and reclamation Standard Revision 5 EL-014 JNT Team Establish

100382 AS/NZS 60079-29-1 Ed. 1.0 Interpretation sheet 1 - Explosive atmospheres - Gas detectors - Performance requirements of detectors for flammable gases

Ruling Other 5 EL-014 JNT Team Establish

100346 AS/NZS 60079-29-1 Ed. 2.0 Explosive atmospheres - Gas detectors - Performance requirements of detectors for flammable gases


5 EL-014 JNT Team Establish

100360 AS/NZS 60079.0 Electrical apparatus for explosive gas atmospheres - General requirements



100492 AS/NZS 60079.35.2 Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety-related matters

Standard New 2 EL-023 JNT Balloting

100313 AS/NZS 60320.1 Appliance couplers for household and similar general purposes - General requirements

Standard Revision 5 EL-004 JNT Balloting

100974 AS/NZS 60335.2.9 A1 Household and similar electrical appliances – Safety – Part 2.9: Particular requirements for grills, toasters and similar portable cooking appliances


5 EL-002 JNT Balloting

100680 AS/NZS 60335.2.90:2006 A2 Household and similar electrical appliances – Safety – Part 2.90: Particular requirements for commercial microwave ovens



101040 AS/NZS 60745.2.22 A1 Hand-held motor-operated electric tools - Safety – Part 2.22: Particular requirements for cut-off machines



100763 AS/NZS 60950.1 2011 A1 Information technology equipment - Safety - General requirements Standard New 5 TE-001 JNT Working Draft Dev

100896 AS/NZS 60998.1 Connecting devices for low voltage circuits for household and similar purposes - General requirements



Page 18


100897 AS/NZS 60998.2.1 Connecting devices for low voltage circuits for household and similar purposes - Particular requirements for connecting devices as separate entities with screw-type clamping units


100898 AS/NZS 60998.2.2 Connecting devices for low voltage circuits for household and similar purposes - Particular requirements for connecting devices as separate entities with screwless-type clamping units


100899 AS/NZS 60998.2.3 Connecting devices for low voltage circuits for household and similar purposes - Particular requirements for connecting devices as separate entities with insulating piercing clamping units


100900 AS/NZS 60998.2.4 Connecting devices for low voltage circuits for household and similar purposes - Particular requirements for twist-on connecting devices


100003 AS/NZS 61000.3.100 Electromagnetic Compatibility (EMC) Limits – Steady State Voltage Limits in Public Electricity Systems

Standard New 5 EL-034 JNT Pub Com Draft

100333 AS/NZS 61000.3.3 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current (<=16 A per phase and not subject to conditional connection


100343 AS/NZS 61000.4.13 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests


100344 AS/NZS 61000.4.14 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test


100345 AS/NZS 61000.4.15 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Flickermeter - Function and design specifications


100347 AS/NZS 61000.4.16 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Test for immunity to conducted common mode disturbances in the frequency range 0 Hz to 150 kHz



100349 AS/NZS 61000.4.27 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Unbalance, immunity test


100350 AS/NZS 61000.4.30 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods



Page 19


100352 AS/NZS 61000.4.34 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase


100340 AS/NZS 61000.4.7 Electromagnetic compatibility (EMC) - Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto


100341 AS/NZS 61000.4.8 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power frequency magnetic field immunity test


101023 AS/NZS 61000.6.3 Update of the Generic Emission Standards Standard International Adoption - Identical

5 TE-003 JNT Team Establish

101024 AS/NZS 61000.6.4 TBA Standard International Adoption - Identical


100925 AS/NZS 61386.1 Conduit systems for cable management - Part 1: General requirements Standard Revision 5 EL-004 JNT Working Draft Dev

100314 AS/NZS 61535.1 Installation couplers - General requirements Standard Revision 5 EL-004 JNT Approval & Publish

100337 AS/NZS 80079.34 Explosive gas atmospheres - Data for flammable gases and vapours, relating to the use of apparatus


5 MS-011 INT Working Draft Dev

100363 AS/NZS 80079.34 Explosive atmospheres - Application of quality systems for electrical and non electrical equipment



100433 AS/NZS 8124.1 Amdt 1 Safety of toys - Safety aspects related to mechanical and physical properties


9 CS-018 JNT Team Establish

100839 AS/NZS CISPR 15:2011 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

Standard New 5 TE-003 JNT Consult & Resolve

101028 AS/NZS CISPR13 Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement



100773 AS/NZS IEC 60825-1 Safety of laser products - Part 1: Equipment classification and requirements


11 SF-019 JNT Approval & Publish

100777 AS/NZS IEC 60825-14 Safety of laser products - Part 14: A user's guide Standard International Adoption - Identical


100780 AS/NZS IEC 60825-2 Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)




Page 20


100813 AS/NZS IEC 62335 Switched Protective Earth Portable RCDs Standard Revision 5 EL-004 JNT Working Draft Dev

100783 AS/NZS IEC 62471 Photobiological Safety of lamps and lamp system Standard International Adoption - Identical


101022 AS/NZS IEC 62471.2 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety


8 SF-019 JNT Team Establish

8874 AS/NZS IEC/TR 61000.1.4 EMC-General-Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in frequency range up to 2 kHz

Technical Report New 5 EL-034 JNT Working Draft Dev

100330 AS/NZS IEC/TR 61000.2.6 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances


100339 AS/NZS IEC/TR 61000.3.13 Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems - Including Corrigendum 1


100336 AS/NZS IEC/TR 61000.3.6 Electromagnetic compatibility (EMC) - Limits - Assessment of emission limits for distorting loads in MV and HV power systems

Technical Report Revision 5 EL-034 JNT Working Draft Dev

100338 AS/NZS IEC/TR 61000.3.7 Electromagnetic compatibility (EMC) - Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems

Technical Report Revision 5 EL-034 JNT Working Draft Dev

100883 AS/NZS ISO ISO 12870 Opthlamic optics - Spectacle frames - Requirements and test methods Standard Revision 3 MS-024 AUS Team Establish

100843 AS/NZS ISO 10001 Quality management - Customer satisfaction - Guidelines for codes of conduct organizations


12 QR-008 JNT Consult & Resolve

100844 AS/NZS ISO 10003 Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations


12 QR-008 JNT Consult & Resolve

100400 AS/NZS ISO 10535:201X Hoists for the transfer of disabled persons – Requirements and test methods.


8 ME-067 INT Balloting

100749 AS/NZS ISO 13028:201X Information and documentation – Implementation Guidelines for Digitisation of Records

Standard Other 11 IT-021 JNT Balloting

100766 AS/NZS ISO 13028:201X Information and documentation – Managing metadata for records -- Part 3: Self-assessment method

Standard Other 11 IT-021 JNT Consult & Resolve

100868 AS/NZS ISO 19110:2006/Amd 1

Geographic Information/Geomatics - Methodology for feature cataloguing


11 IT-004 JNT Balloting


Page 21


100856 AS/NZS ISO 19115-2 Geographic Information/Geomatics - Metadata - Part 2: Extensions for imagery and gridded data

Standard New 11 IT-004 JNT Pub Com Draft

100857 AS/NZS ISO 19119:2006/Amd 1

Geographic information/Geomatics - Services Standard Revised Text Amendment

11 IT-004 JNT Pub Com Draft

100862 AS/NZS ISO 19142 Geographic Information/Geomatics - Web feature service Standard New 11 IT-004 JNT Pub Com Draft

100863 AS/NZS ISO 19143 Geographic Information/Geomatics - Filter encoding Standard New 11 IT-004 JNT Pub Com Draft

100864 AS/NZS ISO 19144.1 Geographic Information/Geomatics - Classification systems - Part 1: Classification system structure

Standard New 11 IT-004 JNT Pub Com Draft

100865 AS/NZS ISO 19146 Geographic information/geomatics - Cross-domain vocabularies Standard New 11 IT-004 JNT Pub Com Draft

100738 AS/NZS ISO 5149.2 Design, construction, testing, marking and documentation Standard International Adoption - Modified

3 ME-006 JNT Working Draft Dev

100739 AS/NZS ISO 5149.3 Installation Site Standard International Adoption - Modified


100740 AS/NZS ISO 5149.4 Operation, maintenance, repair and recovery Standard International Adoption - Modified


100422 AS/NZS ISO 7176.10: 201X Wheelchairs - Determination of obstacle-climbing ability of electric wheelchairs



100423 AS/NZS ISO 7176.26: 201X Vocabulary for Wheeled Mobility Systems Standard International Adoption - Identical


101018 AS/NZS ISO 8124 A2 Safety of toys - Part 1: Safety aspects related to mechanical and physical properties



101019 AS/NZS ISO 8124.1 A3 Safety of toys - Part 1: Safety aspects related to mechanical and physical properties Amd 3



101020 AS/NZS ISO 8124.6 Safety of toys - Part 6: Swings, slides and similar activity toys for indoor and outdoor family domestic use



100848 AS/NZS ISO 9001-2008 Quality management systems - Requirements Standard Correction Amendment

12 QR-008 JNT Approval & Publish

100410 AS/NZS ISO/IEC 14763-2 Planning and installation of copper cabling Standard Revision 11 CT-001 JNT Team Establish

100412 AS/NZS ISO/IEC 14763-2-1 Information technology -- Implementation and operation of customer premises cabling -- Part 2-1: Planning and installation of copper cabling - Identifiers within administration systems


11 CT-001 JNT Team Establish

100404 AS/NZS ISO/IEC 14763-3 Testing of optical fibre cabling Standard Revision 11 CT-001 JNT Pub Com Draft


Page 22


100407 AS/NZS ISO/IEC 15018 Information technology - Generic cabling for homes Standard Revised Text Amendment


100408 AS/NZS ISO/IEC 15018 Information technology - Generic cabling for homes Standard Revised Text Amendment


100409 AS/NZS ISO/IEC 24702 Information technology - Generic cabling - Industrial premises Standard Revised Text Amendment

11 CT-001 JNT Approval & Publish

100406 AS/NZS ISO/IEC 24764 Information technology - Generic cabling systems for data centres Standard Revised Text Amendment

11 CT-001 JNT Approval & Publish

100405 AS/NZS ISO/IEC 29125 Telecommunications cabling guidelines for remote powering of data terminal equipment


11 CT-001 JNT Balloting

100411 AS/NZS ISO/IEC 61935-2 Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Installed cabling


11 CT-001 JNT Working Draft Dev

100808 AS/NZS2161.6 Occupational Protective Gloves Part 6 - Protective Gloves for Firefighters Laboratory Test Methods and Performance Requirements


100936 AS/NZS2891.14.1.2 Methods of sampling and testing asphalt- Field density tests- Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge- Backscatter mode


100938 AS/NZS2891.14.3 Methods of sampling and testing asphalt- Field density tests- calibration of nuclear-thin layer density gauge using standard blocks


100932 AS/NZS2891.3.3 Methods of sampling and testing asphalt-Bitumen content and aggregate grading - Pressure filter method


100661 AS/NZS3823.1.1 Performance of electrical appliances - Airconditioners and heat pumps - Test Methods - Non-ducted airconditioners and heat pumps - Testing and rating for performance

Standard New 5 EL-015 JNT Working Draft Dev

100952 AS/NZS3823.1.2 Performance of electrical appliances—Air conditioners and heat pumps - Energy labelling and minimum energy performance standard (MEPS) requirements


100954 AS/NZS3823.1.4 Performance of electrical appliances - Multiple split-system air conditioners and air-to-air heat pumps -- Testing and rating for performance – New Standard (Adoption of ISO/NP 15042)


100711 AS/NZS4755.3.1 Demand response capabilities and supporting technologies for electrical products - part 3.1: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for air conditioners



Page 23


100712 AS/NZS4755.3.2 Interaction of demand response enabling devices and electrical products – Part 3.2 Operational instructions and connections for devices controlling swimming pool pump-units


100959 AS/NZS5813.1 Information technology equipment - Energy performance of computers, Part 1: Methods of measurement

Standard New 5 TE-001 AUS Working Draft Dev

100960 AS/NZS5813.2 Information technology equipment - Energy performance of computers, Part 2: Minimum Energy Performance Standards (MEPS) for computers


100961 AS/NZS5814.1 Information technology equipment - Energy performance of internal power supplies, Part 1: Definitions & methods of measurement


100963 AS/NZS5815.1 Information technology equipment - Energy performance of computer monitors, Part 1: Definitions & methods of measurement


100964 AS/NZS5815.2 Information technology equipment - Energy performance of computer monitors, Part 2: Minimum Energy Performance Standards (MEPS)


100927 AS/NZS61386.21 Conduit systems for cable management- Part 21: Particular requirements- Rigid conduit systems


100928 AS/NZS61386.22 Conduit systems for cable management- Part 22: Particular requirements- Pliable conduit systems


100701 AS1926.1 - 20XX Part 1 Swimming pool safety - Safety barriers for swimming pools Standard Revision 4 CS-034 AUS Balloting

100704 AS1926.2 - 20XX Swimming pool safety - Location of barriers for swimming pools. Standard Revised Text Amendment

4 CS-034 AUS Balloting

100703 AS1926.3 - 20XX Safety barriers for swimming pools - Water reticulation systems Standard Revised Text Amendment

4 CS-034 AUS Pub Com Draft

100983 AS2050 Installation of roof tiles Standard Revised Text Amendment

6 BD-008 AUS Working Draft Dev

100764 AS2118.1 Revision of AS 2118.1 Automatic fire sprinkler systems Standard Revision 4 FP-004 AUS Team Establish

7204 AS2805.6.7 Derived Unique Key Per Transaction (DUKPT) Standard New 11 IT-005 AUS Consult & Resolve

100702 AS2820 - 20XX Gate units for private swimming pools Standard Revision 4 CS-034 AUS Balloting

100934 AS2891.13.1 Methods of sampling and testing asphalt- Determination of the resilient modulus pof asphalt- Indirect tensile method


100929 AS2891.2.2 Methods of samplinbg and testing asphalt- Sample preparation- Compaction of asphalt test specimens using a gyratory compactor



Page 24


100437 AS3864-20XX Medical refrigeration equipment - For the storage of blood and blood products, and containers for the transport of blood and blood products

Standard Revision 8 HE-020 AUS Pub Com Draft

100819 AS4024.3610 Safety of Machinery - Part 3610: Conveyors – General Safety Requirements

Standard New 2 SF-041 AUS Working Draft Dev

100820 AS4024.3611 Safety of machinery - Part 3611: Conveyors - Belt conveyors for bulk materials handling, travelling trippers and shuttle conveyors

Standard New 2 SF-041 AUS Team Establish

100823 AS4024.3612 Safety of machinery - - Part 3612: Conveyors - Light duty general purpose belt conveyors


100825 AS4024.3613 Safety of machinery - Part 3613: Conveyors - Screw conveyors Standard New 2 SF-041 AUS Working Draft Dev

100826 AS4024.3614 Safety of machinery - Part 3614: Conveyors - Chain conveyors Standard New 2 SF-041 AUS Working Draft Dev

100845 AS4024.3615 Safety of machinery - Part 3615: Conveyors - Mobile and transportable conveyors


100357 AS4371 - 20XX Ceramic tableware Standard Revision 9 CS-094 AUS Consult & Resolve

100373 AS61508 (Commented version - 'supplementary')

Publication of a Commented Version of Parts 1 to 7 of AS 61508 as a Technical Report

Standard Other 11 IT-006 AUS Pub Com Draft

7456 ASCRM 027 Certified reference material -- Alumina -- XRF Elemental analysis Reference Material Other 2 MN-009 AUS Approval & Publish

100790 ASNZS ISO 6709:2008 COR 1-2009

Direct text adoption ISO TC211 Geographic Information/Geomatics program of work of standards

Standard Revision 11 IT-004 JNT Pub Com Draft

100104 ATS 5200.030 Rev. 2 Revision 2 to ATS 5200.030 - Solenoid Valvles. Technical Spec Revision 6 WS-031 AUS Approval & Publish

100143 ATS 5200.106 ATS - Wastewater pumping units (Lifting plants) Technical Spec Revision 6 WS-031 AUS Balloting

7846 ATS 5200.483 Technical Specification for plumbing and drainage products - Vent filters Technical Spec New 6 WS-031 AUS Approval & Publish

8782 ATS 5200.498 Plastic waste fittings Technical Spec New 6 WS-031 AUS Approval & Publish

100210 ATS 5200.504 ATS 5200.504 Water Closet System - Low volume flush water closet with included sewer dosing device

Technical Spec New 6 WS-031 AUS Balloting

100259 ATS 5200.505 Multilayer Piping systems for hot and cold water insatllations inside buildings - Polypropoylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT

Technical Spec New 4 WS-031 AUS Consult & Resolve

100603 ATS 5200.506 Pumps for general use in plumbing water services applications (Rainwater tank pumps)

Technical Spec New 6 WS-031 AUS Working Draft Dev

100555 ATS 5820 E-health web services profile Standard New 9 IT-014 AUS Working Draft Dev

100559 ATS 5821 E-health XML secured payload profiles Standard New 11 IT-014 AUS Working Draft Dev


Page 25


100554 ATS 5822 E-health secure message delivery Standard New 11 IT-014 AUS Working Draft Dev

100747 AZ/NZS 2724.5 Ambient air - Particulate matter - Determination of impinged matter expressed as directional dirtiness, background dirtiness and/or area dirtiness (directional dust gauge method)

Standard Revision 1 EV-007 JNT Team Establish

100534 DR AS 2828.1 Health records - Part 1: Paper based Standard Other 8 IT-014 AUS Pub Com Draft

9007 DR AS 2962 Implementation of HL7 V2.x Part 3: Electronic Messages for exchange of information on drug prescription

Standard Revision 8 IT-014 AUS Working Draft Dev

6093 DR AS/NZS 3856.1 (Rev) Hoists and ramps for people with disabilities - Vehicle Mounted Product Requirements

Standard Revision 8 ME-067 JNT Pub Com Draft

100147 DR AS/NZS 3856.2 (Rev) Hoists and ramps for people with disabilities - Vehicle Mounted - Installation Requirements

Standard Revision 8 ME-067 JNT Pub Com Draft

100080 DR ATS 2828.2 Health records - Part 2: Scanned (digitized) requirements to support electronic health records (EHR)

Technical Spec New 11 IT-014 AUS Pub Com Draft

100581 DR ATS 5338 HL7 V2 eReferral implementation profile Technical Spec New 11 IT-014 AUS Consult & Resolve

100541 DR HB 262 (Rev) Gudelines for pathology messaging between pathology providers and health service providers to harmonize with NEHTA’s specifications, IHE profile and AS4700.2 -2007

Handbook Revision 8 IT-014 AUS Approval & Publish

100567 DR TR 5415 Guidelines for the use of HTML display segments in HL7 V2 messages Technical Report New 11 IT-014 AUS Working Draft Dev

100570 DR TR 5416 Guide to HL7 V2 message parsing and management of character escaping with reference to backward compatibility

Technical Report New 11 IT-014 AUS Approval & Publish

100536 HB 174 Information Security Management, Implementation guide for the health sector

Handbook Revision 8 IT-014 AUS Project Planning

100135 HB 203 Revision of Handbook HB 203 Environmental Risk Management: Principles and Process

Handbook Other 12 OB-007 JNT Consult & Resolve

100384 HB 205 OHS Risk Management Handbook Handbook Revision 12 OB-007 JNT Team Establish

100413 HB-252 Residential communications cabling Handbook Standard Revision 11 CT-001 AUS Team Establish

100809 HB 254 Governance, risk management and control assurance Handbook Revision 12 OB-007 AUS Working Draft Dev

100062 HB-436 Revision of HB-436 to align with ISO 31000 Risk Management Handbook Other 12 OB-007 AUS Working Draft Dev

100227 HB 89 Adoption of ISO/IEC 31010 Risk Assessment Techniques as an AS/NZS Handbook under ISO AS31000

Handbook Other 11 QR-005 JNT Consult & Resolve

100272 HB 90-1 The Small Business Handbook - Guide to ISO 9001:2000 Handbook Revision 12 QR-008 AUS Project Planning


Page 26


8328 HB331 Overhead electrical line design - Handbook Handbook New 5 EL-052 AUS Pub Com Draft

100439 MP 100-2009 Procedures for certification of organic and biodynamic products Misc Publication Revised Text Amendment

1 FT-032 AUS Working Draft Dev

9016 MP54 Survey of standards for Telehealth devices Misc Publication New 8 IT-014 AUS Consult & Resolve

100443 New Accessories for child restraints Standard New 7 CS-085 JNT Project Planning

7297 SAA MP 52 Australian certification scheme for plumbing and drainage product Misc Publication Revision 6 P-009 AUS Consult & Resolve

100535 TBA E-health electronic transfer of prescriptions - Logical services model Technical Spec Other 8 IT-014 AUS Consult & Resolve

100537 TBA E-health electronic transfer of prescriptions - Dispense record CDA implementation guide

Technical Spec Other 8 IT-014 AUS Consult & Resolve

100538 TBA E-health electronic transfer of prescriptions - E-Prescription CDA implementation guide


100539 TBA E-health electronic transfer of prescriptions - Prescription request CDA implementation guide


100563 TBA E-health electronic transfer of prescriptions - Logical information model Technical Spec Other 11 IT-014 AUS Consult & Resolve

100582 TBA Workflow of remote patient monitoring in patients with chronic disease across a continuum of care

Misc Publication Other 11 IT-014 AUS Consult & Resolve

100668 TBA E-health electronic transfer of prescription - Web Services Platform Specification


100540 TBA Representation of structured anatomical pathology reports in HL7 V2 messages

Technical Spec New 8 IT-014 AUS Project Planning

100580 TBA Use of HL7 V2 in patient care messaging Technical Spec Other 11 IT-014 AUS Project Planning

100644 TBA Conformance criteria for existing diagnostics messaging standards Misc Publication New 8 IT-014 AUS Project Planning

100979 TBA eNotification - HL7 V2 collaborative care responsibility message Standard New 8 IT-014 AUS Project Planning

7856 TBA Protective footwear for firefighters - Requirements and test methods Standard Revision 3 SF-049 AUS Pub Com Draft

100212 TBA Core discharge summary structured document template Technical Spec New 11 IT-014 AUS Pub Com Draft

100457 TBA Standards for Bushfire Sprinklers Standard New 4 FP-024 AUS Pub Com Draft

8108 TBA Use of HL7 V3 clinical document architecture in referral and forms based communications

Technical Report Other 8 IT-014 AUS Team Establish

100211 TBA Core discharge summary to HL7 v3 CDA document mapping Technical Spec Other 11 IT-014 AUS Team Establish


Page 27


100687 TBA Australian Standard for Energy Safety Systems (ENSS) for the electricity supply industry (ESI)

Standard New 5 TBA 0 Team Establish

100770 TBA Finger-jointed structural timber Standard New 4 TM-004 AUS Team Establish

100796 TBA Structural design: Nail-plate jointed timber roof trusses Standard New 4 TM-001 AUS Team Establish

100890 TBA Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear



100891 TBA Cast resign partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear



100907 TBA Installation of ground source heat pump systems - Part 1: System design

Standard New 5 TBA AUS Team Establish

100908 TBA Installation of ground source heat pump systems - Part 2: Installation Standard New 5 TBA AUS Team Establish

100909 TBA Installation of ground source heat pump systems - Part 3: Testing and verification


100910 TBA Installation of ground source heat pump systems - Part 4: Decommissioning


100119 TBA Classification system and performance requirements for cricket balls Standard New Standard 9 CS-105 AUS Working Draft Dev

100213 TBA Core GP referral to HL7 v2.x message mapping Technical Spec New 11 IT-014 AUS Working Draft Dev

100329 TBA Collection, storage, transport and treatment of used electrical and electronic equipment

Standard New 11 TBA AUS Working Draft Dev

100504 TBA Core GP referral structured document template Technical Spec New 8 IT-014 AUS Working Draft Dev

100505 TBA Core discharge summary to HL7 V2.x message mapping Technical Spec New 8 IT-014 AUS Working Draft Dev

100533 TBA Guidelines for the specification of conformity assessment schemes for e-health standards

Other Other 11 IT-014 AUS Working Draft Dev

100560 TBA Healthcare identifier HL7 implementation guide Handbook New 11 IT-014 AUS Working Draft Dev

100577 TBA Specification of a mechanism to access historical reports from diagnostic service providers

Technical Report New 11 IT-014 AUS Working Draft Dev

100598 TBA Health indicators conceptual framework Standard New 8 IT-014 AUS Working Draft Dev

100602 TBA Harmonised data types for information interchange Standard New 8 IT-014 AUS Working Draft Dev

100643 TBA Implementation of HL7 V2.x Part 3: electronic messages for exchange of information on drug prescription

Handbook Other 8 IT-014 AUS Working Draft Dev


Page 28


100709 TBA Development of a Standard for the Determination of Group numbers for wall and ceiling linings materials

Standard New 4 FP-018 AUS Working Draft Dev

100895 TBA Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications



100901 TBA Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0.2mm2 up to 35mm2 (included)


5 EL-004 AUS Working Draft Dev

100902 TBA Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35mm2 up to 300mm2 (included)



100903 TBA Boxes and enclosures for electrical accessories for household and simiilar fixed electrical installations - Part 1: General requirements



100904 TBA Boxes and enclosed for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means



100905 TBA Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures



100906 TBA Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures



100977 TBA Person and Provider Identification in Healthcare Standard Revision 8 IT-014 AUS Working Draft Dev

100978 TBA GP referral - Clinical Document Architecture (CDA) Exchange Specification

Technical Spec New 8 IT-014 AUS Working Draft Dev

5281 TR 4896 Health informatics - Electronic health record communication - Part 1: Reference model

Technical Report New 8 IT-014 AUS Working Draft Dev

100553 TR 5823 E-health endpoint location service Technical Spec Revision 11 IT-014 AUS Working Draft Dev

7457 TR2.27 Alumina - Preparation and certification of ASCRM 027 Reference Material Other 2 MN-009 AUS Working Draft Dev

8484 1851 Maintenance of fire protection systems and equipment. Standard Revision 4 FP-001 AUS Consult & Resolve

100779 3001 Electrical installations (known as the Australian/New Zealand Wiring Rules)




Page 29


100781 3001 Electrical installations—Transportable structures and vehicles including their site supplies



100388 3010 Electrical installations - Generating sets Standard Revision 5 EL-001 JNT Working Draft Dev

100707 3837 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter.


4 FP-018 JNT Pub Com Draft

100271 5376 Standard on Gender-inclusive Job Evaluation Standard New 12 MB-020 AUS Pub Com Draft

100417 5388.2 Analysis of Physical Material for Forensic Purposes Standard New 12 CH-041 AUS Pub Com Draft

100418 5388.3 Interpretation of Results from the Analysis of Physical Material for Forensic Purposes

Standard New 12 CH-041 AUS Working Draft Dev

100419 5388.4 Reporting Results and Conclusions from the Analysis of Physical Material for Forensic Purposes

Standard New 12 CH-041 AUS Team Establish

100708 9705 Fire tests - Full scale room test for surface products Standard Revision 4 FP-018 INT Working Draft Dev

Documents

Page 108420PQQul 120iult1ag0yemge4n Page 1 8m08g0s ......inspection and testing of composite gas cylinders (ISO 11623:2002, MOD) Standard International Adoption - Modified 3 ME-002