View
0
Download
0
Category
Preview:
Citation preview
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 1
Innovative Raum- und Zargensysteme mit schlanken Profilen für maximale Tranzparenz
OFFICE TRENNWANDSYSTEME
Ref: 0PS18DEUK
Office Partition Wall SystemsInnovative all-glass walls with slim profiles for maximal transparency
2 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Office
Mit dem Glastrennwandsystem Längle Office bietet CRL eine ebenso kreative wie effektvolle Lösung für den modernen Innenausbau. Das trockenverglaste Profilsystem sorgt mit seinen filigranen Decken-, Wand- und Zargenprofilen für maximale Transparenz.
Die schlanken Aluminiumprofile sind in in den Oberflächen hell eloxiert, mattschwarz, Edelstahloptik oder optional in jedem RAL-Ton erhältlich und bieten im Zusammenspiel mit der Verglasung ein elegantes Erscheinungsbild.
With its Langle Office partition wall systems, CRL offers a creative and effective solution for modern interior design.The dry-glazed system is easy to assemble and install. It includes a frame for wall and ceiling mounting and a door frame that produces maximum transparency.
The aluminium profiles are available in satin anodised, brushed nickel, matt black finishes as well as in any RAL colour, offering an elegant design with the glass.
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 3
4 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 5
door
door
door
Basis Vertikalschnitt Door vertical section
Fixrahmenprofil Vertikalschnitt Frame vertical section
Basis Horizontalschnitt Door horizontal section
1
2 3
Fixrahmenprofil Horizontalschnitt Frame horizontal section
4
5
Basis-W / Door W
Fixrahmenprofil / Frame
Oberfixrahmenprofil / Top-Frame
door
door
door
door
door
door
door
door
door
Das Glastrennwandsystem
NO SILICON ADJUSTABLE
KEIN SILIKON
NO SILICON
VE
RS
TELL
BA
RA
DJU
STA
BLE
Basis-G / Door G1
4
2
3 5
Vorteile
• Keine Versiegelung, Trockenverglasung
• Türband stufenlos höhenverstellbar, keine Bohrungen notwendig
• Als Einfachverglasung ausführbar
• Schallreduktion durch Zargensystem (Keine offene Fuge zwischen Glas-Anschlagtür, Seitenteil und Oberlicht)
• Rahmenprofile für Glas-Glas und Glas-Wand
• Gängige Türband- und Schlosstypen verwendbar
• Glastüre (8-12 mm)
• Glasseitenteil (8-16 mm)
Anwendungen
• Büroverglasungen sowie Glastrennwände• Innenverglasungen für private Wohnhäuser• Praxis und Kanzlei• Hotel und Wellnessbereichen• Raucherabtrennungen
Glass-Partition-Wall-System
Advantages• Complete dry-glazed system, no wet sealing necessary• Door hinge fully height-adjustable, no drilling necessary• For use with single glazing• Sound reduction (No open joint between glass door, side panel and top light)• Matching frame profile for glass to glass and glass to wall• Suitable for many common hinge and lock types• Glass door (8-12 mm)• Fixed glass panel (8-16 mm)
Applications• Office glazings and glass partition walls• Interior glazings for private homes• Practices and chambers• Hotels and spa• Smoking areas
NEU: Montage Anleitungen jetzt auch auf unserem YouTube Kanal.
NEW: Assembly instructions now also on our YouTube channel.
6 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Zargenprofile / Door profiles
Türzargenprofil, 6 m Länge Door profile, 6 m length
Art.-Nr. / Cat. No.FBD6SAFBD6BN FBD6MBL
Dichtung für 8, 10 und 12 mm Glas Gasket for 8, 10 and 12 mm glass
Clipprofil, 6 m Länge Clip profile, 6 m length
Art.-Nr. / Cat. No.FCLPD6SAFCLPD6BNFCLPD6MBL
Dichtung für 16 mm Glas, 50 m Länge Gasket for 16 mm glass, 50 m length
Art.-Nr. / Cat. No. FFP16BLFFP16GR
Dichtung für 8, 10 und 12 mm Türglas Gasket for 8, 10 and 12 mm door glass
Fixierdichtung für 8-16 mm Glas Gasket for 8-16 mm glass
47
48
Basis G Profil Door G profile
Inkl. / Incl FBD6XX FCLPD6XX FDJXX FFPXX FRGXX
3 m Länge / 3 m length
Art.-Nr. / Cat. No.FG2GD3SAFG2GD3BNFG2GD3MBL
1 m Länge / 1.1 m length
Art.-Nr. / Cat. No. FG2GD1SA FG2GD1BN FG2GD1MBL
Basis-G Set - bestehend aus 2 x 2,45 m und 1 x 1,1 m Profilen inkl. FDJXX, Zubehörteile und Fixiergummis für Glasseitenteil Door G kit incl. 2 x 2,45 m and 1 x 1,1 m profiles with FDJXX, accessories and fixing gaskets for fixed glass
Art.-Nr. / Cat. No. FTG2GDSAFTG2GDBNFTG2GDMBL
Glas - Glas | Glass - Glass Glas - Wand | Glass - Wall
Basis W Profil Door W profile
Inkl. / Incl. FBD6XX FDJXX
3 m Länge / 3 m length
Art.-Nr. / Cat. No. FW2GD3SA FW2GD3BN FW2GD3MBL
1,1 m Länge / 1.1 m length
Art.-Nr. / Cat. No. FW2GD1SA FW2GD1BN FW2GD1MBL
.
Basis-W Set - bestehend aus 2 x 2,45 m und 1 x 1,1 m Profilen inkl. FDJXX und Zubehörteile Door W kit incl. 2 x 2,45 m and 1 x 1,1 m profiles with FDJXX and accessories
Art.-Nr. / Cat. No.FTW2GDSAFTW2GDBNFTW2GDMBL
48
16
30
MaterialProfil aus Aluminium, Dichtung TPE
GlasstärkeGlastür 8-12 mm Glas-Seitenteile 8-16 mm (für 16 mm, Dichtung FFP16XX separat bestellen)
Oberfläche Profil EV1 eloxiert (SA), Edelstahleffekt (BN), Mattschwarz (MBL)
Farbe Dichtung Schwarz (BL), Grau (GR)
Material: Aluminium profil, TPE joints
Glass thickness: Glass door 8-12 mm Glass side panel 8-16 mm (for 16 mm glass, order gaskets FFP16XX separately)
Finish profile: Satin Anodised (SA), Brushed Nickel (BN), Matt Black (MBL)
Gasket colour: Black (BL), Grey (GR)
• Verfügbar in 6 m Lagerlängen oder im Zuschnitt
• Verwendbar für gängige Türband-und Schlosstypen
• Available in 6 m / cutting on request
• Suitable for many common hinges and locks
50 m Länge / 50 m length
Art.-Nr. / Cat. No FDJBL FDJGR
6 m Länge / 6 m length
Art.-Nr. / Cat. No FDJBL6FDJGR6
50 m Länge / 50 m length
Art.-Nr. / Cat. No FFPBL FFPGR
6 m Länge / 6 m length
Art.-Nr. / Cat. No FFPBL6 FFPGR6
50 m Länge / 50 m length
Art.-Nr. / Cat. No FRGBL FRGGR
6 m Länge / 6 m length
Art.-Nr. / Cat. No FRGBL6 FRGGR6
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 7
Rahmenprofile / Frame profiles
3 m Fixrahmenverglasungsprofil für Boden, Wand und Decke (optional) Frame profile for floor, wall and ceiling (optional)
Inkl. / Incl. FRMD6XX FCLPD6XX FFPXX FRGXX
Art.-Nr. / Cat. No.FW2GF3SAFW2GF3BNFW2GF3MBL
3 m Fixrahmenverglasungsprofilfür DeckeFrame profile for ceiling
Inkl. / Incl.FTPD6XXFFPXXFRGXX
Art.-Nr. / Cat. No.FC2GF3SAFC2GF3BNFC2GF3MBL
FixrahmenprofilFrame profile
Art.-Nr. / Cat. No. FRMD6SA FRMD6BN FRMD6MBL
Dichtung für 8, 10 und 12 mm Glas Gasket for 8, 10 and 12 mm glass
Fixrahmenprofil für Decke Ceiling fixed profile
Art.-Nr. / Cat. No.FTPD6SAFTPD6BNFTPD6MBL
Dichtung für 16 mm Glas, 50 m Länge Gasket for 16 mm glass, 50 m length
Art.-Nr. / Cat. No. FFP16BLFFP16GR
Clipprofil Clip profile
Art.-Nr. / Cat. No.FCLPD6SAFCLPD6BNFCLPD6MBL
Fixierdichtung für 8-16 mm Glas Gasket for 8-16 mm glass
30
35
30
2635
30
20
35
30
MaterialProfil aus Aluminium, Dichtung TPE
GlasstärkeGlasseitenteile 8-16 mm
Oberfläche Profile EV1 eloxiert (SA), Edelstahleffekt (BN), Mattschwarz (MBL)
Farbe Dichtung Schwarz (BL), Grau (GR)
• Verfügbar in 6 m Lagerlängen oder im Zuschnitt
Material: Aluminium profil, TPE joints
Glass thickness: Glass side panel 8-16 mm
Finish profile: Satin Anodised (SA), Brushed Nickel (BN), Matte Black (MBL)
Gasket colour: Black (BL), Grey (GR)
• Available in 6 m / cutting on request
50 m Länge / 50 m length
Art.-Nr. / Cat. No FFPBL FFPGR
50 m Länge / 50 m length
Art.-Nr. / Cat. No FRGBL FRGGR
6 m Länge / 6 m length
Art.-Nr. / Cat. No FRGBL FRGGR
50 m Länge / 6 m length
Art.-Nr. / Cat. No FFPBL6 FFPGR6
8 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Beschläge & Zubehör / Fittings & Accessories
Türbänd mit Rahmenteil, eckig Hinge with frame pivot, square
Art.-Nr. / Cat. No. FHSSA FHSBN
• Für 8 - 10 mm Glas
• Max. Türgewicht: 50 kg
• Max Türbreite: 1.000 mm
• Max Türhöhe mit 2 Scharnieren: 2.200 mm
• Max Türhöhe mit 3 Scharnieren: 2.600 mm
• For 8 - 10 mm glass
• Max door weight: 50 kg
• Max door width: 1,000 mm
• Max door height with 2 hinges: 2,200 mm
• Max door height with 3 hinges: 2,600 mm
Türbänd mit Rahmenteil, rund Hinge with frame pivot, round
Art.-Nr. / Cat. No. FHDSA FHDBN
• Für 8 - 10 mm Glas
• Max. Türgewicht: 50 kg
• Max Türbreite: 1.000 mm
• Max Türhöhe mit 2 Scharnieren: 2.200 mm
• Max Türhöhe mit 3 Scharnieren: 2.600 mm
• For 8 - 10 mm glass
• Max door weight: 50 kg
• Max door width: 1,000 mm
• Max door height with 2 hinges: 2,200 mm
• Max door height with 3 hinges: 2,600 mm
Hammerkopfmutter für 8-10 mm Glas Hammer head nut for 8-10 mm glass
Art.-Nr. / Cat. No. FHHN
Hammerkopfmutter für 12 mm Glas Hammer head nut for 12 mm glass
Art.-Nr. / Cat. No. FHHN12
Schlosskasten inkl. Profilzylinder, eckig Latch with cylinder, square
Art.-Nr. / Cat. No. FLKSSA FLKSBN
Schlosskasten inkl. Profilzylinder, rund Latch with cylinder, round
Art.-Nr. / Cat. No. FLKDSAFLKDBN
Schlosskasten, nicht abschließbar, eckig Non-locking latch, square
Art.-Nr. / Cat. No. FLSSA FLSBN
Schlosskasten, nicht abschließbar, rund Non-locking latch, round
Art.-Nr. / Cat. No. FLDSA FLDBN
Drückergriffgarnitur, rund Handle set, round
Art.-Nr. / Cat. No. FLHSA FLHBN
Montageschlüssel Installation key
Art.-Nr. / Cat. No. EUOKEY
33 45
20
60 61
45
425,810,5
M5
30 55
ø20
ø2033 45
ø4560 61
ø4560 61
ø4560 61
ø4560 61
ø20
8
ø20
ø18
137
57
21
10,5
M5
621
10,5
M5
6
60 61
45
60 61
45
60 61
45
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 9
Beschläge & Zubehör / Fittings & Accessories
Schließblech Striking plate
Art.-Nr. / Cat. No. FSP
Schließblech Dorma Dorma striking plate
Art.-Nr. / Cat. No. FDSP
Boden-und Eckverbinder Corner connector
Art.-Nr. / Cat. No. FFCC
Basis und Top Frame oder Frame Verbinder Basis and top frame or frame connector
Art.-Nr. / Cat. No. FTC
Fixrahmenprofile Verbinder Top frame and frame connector
Art.-Nr. / Cat. No. FFCCL
16,1
M5
3
30
30
15,8
3
30
60
M5
15,8
M5
3
60
30
33 2,5
150
35
60
2
10 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
CRL Längle Office XL ist die Lösung für hohe Anforderungen. Wird zum Beispiel Schallschutz benötigt, ist Office XL das richtige System. Office XL kann Isolierglas-Scheiben bis 28 Millimeter aufnehmen und erreicht als Fixverglasung Schallschutzwerte bis 42 dB.
CRL Langle Office XL is the solution for those with high expectations. For example, if sound reduction is required Office XL will be the right choice as it is suitable for insulating glass of up to 28 mm in thickness and enables a high sound reduction of the fixed panels.
Office XL
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 11
12 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Das Glaswandtrennsystem
Vorteile• Keine Versiegelung, Trockenverglasung
• Türband stufenlos höhenverstellbar, keine Bohrungen notwendig
• Als Einfach- und Doppelverglasung ausführbar
• Schallreduktion bis zu 42 dB
• Rahmenprofile für Glas-Glas und Glas-Wand
• Gängige Türband- und Schlosstypen verwendbar
• Glastüre 10-12 mm
• Holztüre 40 mm
• Glasseitenteil 20-28 mm
Anwendungen• Büroverglasungen sowie Glastrennwände• Innenverglasungen für private Wohnhäuser• Praxis und Kanzlei• Hotel und Wellnessbereichen• Raucherabtrennungen
NO SILICON ADJUSTABLE
KEIN SILIKON
NO SILICON
VE
RS
TELL
BA
RA
DJU
STA
BLE
Basis XL VertikalschnittDoor XL vertical section
Basis XL / Fixrahmenprofil XL VertikalschnittDoor XL / Frame XL vertical section
Fixrahmenprofil XL VertikalschnittFrame XL vertical section
Basis XL HorizontalschnittDoor XL horizontal section
1
2 3
Fixrahmenprofil XL / T XL HorizontalschnittDoor XL / T XL horizontal section
4
5
Basis XL / Door XL
Fixrahmenprofil XL / Frame XL
Fixrahmenprofil T XL / Frame T XL
Oberfixrahmenprofil XL / Top Frame XL
3
1
2 5
4
26
47
1221
57 7
521
321
3547
9
12
47474726
2155211211311
X=
X=
vertical section FRAME XL
42.6
horizontal section FRAME XL/FRAME T XL
52
max.10max.10
3526
85
21
42.6
max
.10
max
.10
42.6
vertical section BASIS XL vertical section BASIS XL/FRAME XL
horizontal section BASIS XL/FRAME XL
Die
se Z
eich
nung
ist E
igen
tum
der
Län
gle
Gla
s G
mbH
. Die
ent
halte
nen
Info
rmat
ione
n dü
rfen
ohne
sch
riftli
che
Gen
ehm
igun
g ni
cht k
opie
rt, v
ervi
elfä
ltigt
, Drit
ten
zugä
nglic
h ge
mac
ht o
der z
ur u
nbef
ugte
n S
elbs
tanf
ertig
ung
verw
ende
t wer
den.
Zuw
ider
hand
lung
ver
pflic
htet
zu
Sch
aden
ersa
tz.
This
dra
win
g is
a p
rope
rty o
f Län
gle
Gla
s G
mbH
. The
con
tain
ing
info
rmat
ion
mus
t not
be
copi
ed, r
eplic
ated
, mad
e ac
cess
ible
to a
third
par
ty o
r use
d fo
r an
unau
thor
ised
pro
duct
ion.
Vio
latio
n ob
ligat
es d
amag
es.
X=
47 X=
26
211313
Basis door (B)Breite width (W)
Glas glass 1 = X+26 Glas glass 2 = X+24 Glas glass 3 = B-76Glas glass 1 = X+26 Glas glass 2 = X+26Glas glass 3 = F-26 *
Fixrahmenprofil frame (F)
*Ohne Fixrahmenprofil T XL / Without frame T XL
Höh
e he
ight
(H
)
Höh
e he
ight
(H
)B
asis
doo
r ( B
)G
las
glas
s =
H-1
2G
las
glas
s =
B-4
5
Gla
s gl
ass
= B
-45
Bas
is d
oor
( B)
Gla
s gl
ass
= H
-34
Advantages• Complete dry-glazed system, no wet sealing necessary• Door hinge fully height-adjustable, no drilling neccessary• Can be executed as single or double glazing• High sound reduction up to 42 dB• Matching frame profile for glass to glass, and glass
to wall• Suitable for many common hinge and lock types• Glass door 10-12 mm• Wood door 40 mm• Glass side part 20-28 mm
Applications• Office glazings and glass partition walls• Interior glazings for privat homes• Practices and chambers• Hotels and spas• Smoking areas
26
47
1221
57 7
521
321
3547
9
12
47474726
2155211211311
X=
X=
vertical section FRAME XL
42.6
horizontal section FRAME XL/FRAME T XL
52
max.10max.10
3526
85
21
42.6
max
.10
max
.10
42.6
vertical section BASIS XL vertical section BASIS XL/FRAME XL
horizontal section BASIS XL/FRAME XL
Die
se Z
eich
nung
ist E
igen
tum
der
Län
gle
Gla
s G
mbH
. Die
ent
halte
nen
Info
rmat
ione
n dü
rfen
ohne
sch
riftli
che
Gen
ehm
igun
g ni
cht k
opie
rt, v
ervi
elfä
ltigt
, Drit
ten
zugä
nglic
h ge
mac
ht o
der z
ur u
nbef
ugte
n S
elbs
tanf
ertig
ung
verw
ende
t wer
den.
Zuw
ider
hand
lung
ver
pflic
htet
zu
Sch
aden
ersa
tz.
This
dra
win
g is
a p
rope
rty o
f Län
gle
Gla
s G
mbH
. The
con
tain
ing
info
rmat
ion
mus
t not
be
copi
ed, r
eplic
ated
, mad
e ac
cess
ible
to a
third
par
ty o
r use
d fo
r an
unau
thor
ised
pro
duct
ion.
Vio
latio
n ob
ligat
es d
amag
es.
X=
47 X=
26
211313
Basis door (B)Breite width (W)
Glas glass 1 = X+26 Glas glass 2 = X+24 Glas glass 3 = B-76Glas glass 1 = X+26 Glas glass 2 = X+26Glas glass 3 = F-26 *
Fixrahmenprofil frame (F)
*Ohne Fixrahmenprofil T XL / Without frame T XL
Höh
e he
ight
(H
)
Höh
e he
ight
(H
)B
asis
doo
r ( B
)G
las
glas
s =
H-1
2G
las
glas
s =
B-4
5
Gla
s gl
ass
= B
-45
Bas
is d
oor
( B)
Gla
s gl
ass
= H
-34
1
26
47
1221
57 7
521
321
3547
9
12
47474726
2155211211311
X=
X=
vertical section FRAME XL
42.6
horizontal section FRAME XL/FRAME T XL
52
max.10max.10
3526
85
21
42.6
max
.10
max
.10
42.6
vertical section BASIS XL vertical section BASIS XL/FRAME XL
horizontal section BASIS XL/FRAME XL
Die
se Z
eich
nung
ist E
igen
tum
der
Län
gle
Gla
s G
mbH
. Die
ent
halte
nen
Info
rmat
ione
n dü
rfen
ohne
sch
riftli
che
Gen
ehm
igun
g ni
cht k
opie
rt, v
ervi
elfä
ltigt
, Drit
ten
zugä
nglic
h ge
mac
ht o
der z
ur u
nbef
ugte
n S
elbs
tanf
ertig
ung
verw
ende
t wer
den.
Zuw
ider
hand
lung
ver
pflic
htet
zu
Sch
aden
ersa
tz.
This
dra
win
g is
a p
rope
rty o
f Län
gle
Gla
s G
mbH
. The
con
tain
ing
info
rmat
ion
mus
t not
be
copi
ed, r
eplic
ated
, mad
e ac
cess
ible
to a
third
par
ty o
r use
d fo
r an
unau
thor
ised
pro
duct
ion.
Vio
latio
n ob
ligat
es d
amag
es.
X=
47 X=
26
211313
Basis door (B)Breite width (W)
Glas glass 1 = X+26 Glas glass 2 = X+24 Glas glass 3 = B-76Glas glass 1 = X+26 Glas glass 2 = X+26Glas glass 3 = F-26 *
Fixrahmenprofil frame (F)
*Ohne Fixrahmenprofil T XL / Without frame T XL
Höh
e he
ight
(H
)
Höh
e he
ight
(H
)B
asis
doo
r ( B
)G
las
glas
s =
H-1
2G
las
glas
s =
B-4
5
Gla
s gl
ass
= B
-45
Bas
is d
oor
( B)
Gla
s gl
ass
= H
-34
* Ohne Fixrahmenprofil T XL / Without frame T XL
26
47
1221
57 7
521
321
3547
9
12
47474726
2155211211311
X=
X=
vertical section FRAME XL
42.6
horizontal section FRAME XL/FRAME T XL
52
max.10max.10
3526
85
21
42.6
max
.10
max
.10
42.6
vertical section BASIS XL vertical section BASIS XL/FRAME XL
horizontal section BASIS XL/FRAME XL
Die
se Z
eich
nung
ist E
igen
tum
der
Län
gle
Gla
s G
mbH
. Die
ent
halte
nen
Info
rmat
ione
n dü
rfen
ohne
sch
riftli
che
Gen
ehm
igun
g ni
cht k
opie
rt, v
ervi
elfä
ltigt
, Drit
ten
zugä
nglic
h ge
mac
ht o
der z
ur u
nbef
ugte
n S
elbs
tanf
ertig
ung
verw
ende
t wer
den.
Zuw
ider
hand
lung
ver
pflic
htet
zu
Sch
aden
ersa
tz.
This
dra
win
g is
a p
rope
rty o
f Län
gle
Gla
s G
mbH
. The
con
tain
ing
info
rmat
ion
mus
t not
be
copi
ed, r
eplic
ated
, mad
e ac
cess
ible
to a
third
par
ty o
r use
d fo
r an
unau
thor
ised
pro
duct
ion.
Vio
latio
n ob
ligat
es d
amag
es.
X=
47 X=
26
211313
Basis door (B)Breite width (W)
Glas glass 1 = X+26 Glas glass 2 = X+24 Glas glass 3 = B-76Glas glass 1 = X+26 Glas glass 2 = X+26Glas glass 3 = F-26 *
Fixrahmenprofil frame (F)
*Ohne Fixrahmenprofil T XL / Without frame T XL
Höh
e he
ight
(H
)
Höh
e he
ight
(H
)B
asis
doo
r ( B
)G
las
glas
s =
H-1
2G
las
glas
s =
B-4
5
Gla
s gl
ass
= B
-45
Bas
is d
oor
( B)
Gla
s gl
ass
= H
-34
26
47
1221
57 7
521
321
3547
9
12
47474726
2155211211311
X=
X=
vertical section FRAME XL
42.6
horizontal section FRAME XL/FRAME T XL
52
max.10max.10
3526
85
21
42.6
max
.10
max
.10
42.6
vertical section BASIS XL vertical section BASIS XL/FRAME XL
horizontal section BASIS XL/FRAME XL
Die
se Z
eich
nung
ist E
igen
tum
der
Län
gle
Gla
s G
mbH
. Die
ent
halte
nen
Info
rmat
ione
n dü
rfen
ohne
sch
riftli
che
Gen
ehm
igun
g ni
cht k
opie
rt, v
ervi
elfä
ltigt
, Drit
ten
zugä
nglic
h ge
mac
ht o
der z
ur u
nbef
ugte
n S
elbs
tanf
ertig
ung
verw
ende
t wer
den.
Zuw
ider
hand
lung
ver
pflic
htet
zu
Sch
aden
ersa
tz.
This
dra
win
g is
a p
rope
rty o
f Län
gle
Gla
s G
mbH
. The
con
tain
ing
info
rmat
ion
mus
t not
be
copi
ed, r
eplic
ated
, mad
e ac
cess
ible
to a
third
par
ty o
r use
d fo
r an
unau
thor
ised
pro
duct
ion.
Vio
latio
n ob
ligat
es d
amag
es.
X=
47 X=
26
211313
Basis door (B)Breite width (W)
Glas glass 1 = X+26 Glas glass 2 = X+24 Glas glass 3 = B-76Glas glass 1 = X+26 Glas glass 2 = X+26Glas glass 3 = F-26 *
Fixrahmenprofil frame (F)
*Ohne Fixrahmenprofil T XL / Without frame T XL
Höh
e he
ight
(H
)
Höh
e he
ight
(H
)B
asis
doo
r ( B
)G
las
glas
s =
H-1
2G
las
glas
s =
B-4
5
Gla
s gl
ass
= B
-45
Bas
is d
oor
( B)
Gla
s gl
ass
= H
-34
2 3
NEU: Montage Anleitungen jetzt auch auf unserem YouTube Kanal.
NEW: Assembly instructions now also on our YouTube channel.
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 13
Zargenprofil XL / Door profiles XL
Basis XL Zargenschlussprofil für Glas-Anschlagtüren in Kombination mit Wandanschluss inkl. Gummi
Door XL stop profile for glass doors in combination with wall connection incl. gaskets
Inkl. / Incl. FXBD6XX FXCLPD6XX FXDJXX FFPXX FFP14XX FRGXX
3 m Länge / 3m length Art.-Nr. / Cat. No. FXG2GD3SA FXG2GD3BN FXG2GD3MBL
1,1 m Länge / 1.1m length Art.-Nr. / Cat. No. FXG2GD1SA FXG2GD1BN FXG2GD1MBL
Basis XL Zargenschlussprofil für Glas-Anschlagtüren in Kombination mit Glasseitenteil und Glasoberlicht inkl. Gummi
Door XL stop profile for glass doors in combination with glass side panel and glass top light incl. gaskets
Inkl. / Incl. FXBD6XX FXCLPD6XX FXDJXX
3 m Länge / 3m length Art.-Nr. / Cat. No. FXW2GD3SA FXW2GD3BN FXW2GD3MBL
1,1 m Länge / 1.1m length Art.-Nr. / Cat. No. FXW2GD1SA FXW2GD1BN FXW2GD1MBL
Türzargenprofil XL Door profile XL
Art.-Nr. / Cat. No. FXBD6SAFXBD6BNFXBD6MBL
Clipprofil Clip profile
Art.-Nr. / Cat. No.FCLPD6SAFCLPD6BNFCLPD6MBL
Clipprofil XL Clip profile XL
Art.-Nr. / Cat. No. FXCLPD6SA FXCLPD6BN FXCLPD6MBL
Dichtung für 26 mm Glas Gasket for 26 mm glass
Zargendichtung XL Frame profile gasket XL
Art.-Nr. / Cat. No. FXDJBL FXDJGR
Dichtung für 28 mm Glas, 50 m Länge Gasket for 28 mm glass, 50 m length
Art.-Nr. / Cat. No. FFP16BL FFP16GR
Dichtung für 20, 22 und 24 mm Glas Rubber for 20, 22 and 24 mm glass
Fixierdichtung Fixing gasket
Art.-Nr. / Cat. No. FRGBL FRGGR
J J K K L
L
M
M
J J K K L
L
M
M
J J K K L
L
M
M
J J K K L
L
M
M
C
C
DD
E
E
G
GH H
C
C
DD
E
E
G
GH H
C
C
DD
E
E
G
GH H
C
C
DD
E
E
G
GH H
A
A
A
A
A
A
A
A
MaterialProfil aus Aluminium, Dichtung TPE
GlasstärkeGlastür 10-12 mm, Glas-Seitenteile 20-28 mm, Holztür 40 mm
Oberfläche Profil EV1 elox. (SA), Edelstahleffekt (BN), Mattschwarz (MBL)
Farbe Dichtung: Schwarz (BL), Grau (GR)
• Verfügbar in 6 m Lagerlängen oder im Zuschnitt
Material: Aluminium profil, TPE joints
Glass thickness: Glass door 10-12 mm, Glass side panel 20-28 mm, wood door 40 mm
Finishing profile: Satin Anodised (SA), Brushed Nickel (BN), Matte Black (MBL)
Gasket colour: Black (BL), Grey (GR)
• Available in 6 m / Cutting on request
50 m Länge / 50 m length
Art.-Nr. / Cat. No FFP14BLFFP14GR
50 m Länge / 50 m length
Art.-Nr. / Cat. No FFPBLFFPGR
6 m Länge / 6 m length
Art.-Nr. / Cat. No FFPBL6FFPGR6
6 m Länge / 6 m length
Art.-Nr. / Cat. No FFP14BL6 FFP14GR6
14 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Rahmenprofil XL / Frame profiles XL
Fixrahmenverglasung XL für Boden, Wand und Decke (optional) Fixed frame XL profile for floor, wall and ceiling (optional)
Inkl. / Incl. FXFRMD6XX FCLPD6XX FFPXX FFP14XX FRGXX
Oberfixrahmenverglasung XL für Decke Top fixed frame XL profile for ceiling
Inkl. / Incl. FXTPD6XX FFPXX FFP14XX FRGXX
Fixrahmenverglasung T XL Fixed frame T XL profile
Inkl. / Incl.FXFRMT6XX FCLPD6XX (x2) FFPXX FFP14XX FRGXX
Art.-Nr. / Cat. No. FXG2GF3SA FXG2GF3BN FXG2GF3MBL
Fixrahmenprofil XL Frame profile XL
Art.-Nr. / Cat. No. FXFRMD6SA FXFRMD6BN FXFRMD6MBL
Fixrahmenprofil XL für Decke Frame profile XL for Ceiling
Art.-Nr. / Cat. No. FXTPD6SA FXTPD6BN FXTPD6MBL
Dichtung für 20, 22 und 24 mm Glas Rubber for 20, 22 and 24 mm glass
Dichtung für 26 mm Glas Gasket for 26 mm glass
Art.-Nr. / Cat. No. FFP14BL FFP14GR
Fixrahmenprofil T XL Frame profile T XL
Art.-Nr. / Cat. No. FXFRMT6SA FXFRMT6BN FXFRMT6MBL
Dichtung für 28 mm Glas, 50 m Länge Gasket for 28 mm glass, 50 m length
Art.-Nr. / Cat. No. FFP16BL FFP16GR
Clipprofil Clip profile
Art.-Nr. / Cat. No. FXCLPD6SAFXCLPD6BNFXCLPD6BN
Fixierdichtung Fixing gasket
J J K K L
L
M
M
J J K K L
L
M
M
J J K K L
L
M
M
J J K K L
L
M
M
C
C
DD
E
E
G
GH H
C
C
DD
E
E
G
GH H
MaterialProfil aus Aluminium, Dichtung TPE
GlasstärkeGlas-Seitenteile 20-28 mm
Oberfläche ProfilEV1 elox. (SA), Edelstahleffekt (BN),Mattschwarz (MBL)
Farbe Dichtung: Schwarz (BL), Grau (GR)
• Verfügbar in 6 m Lagerlängen oder im Zuschnitt
Material: Aluminium profile,TPE joints
Glass thickness: Glass side panel 20-28 mm
Finishing profile: Satin Anodised (SA), Brushed Nickel (BN), Matte Black (MBL)
Gasket colour: Black (BL), Grey (GR)
• Available in 6 m / Cutting on request
Art.-Nr. / Cat. No. FXW2GF3SA FXW2GF3BN FXW2GF3MBL
Art.-Nr. / Cat. No. FXC2GF3SA FXC2GF3BN FXC2GF3MBL
J J K K L
L
M
M
J J K K L
L
M
M
C
C
DD
E
E
G
GH H
C
C
DD
E
E
G
GH H
C
C
DD
E
E
G
GH H
C
C
DD
E
E
G
GH H
A
A
A
A
50 m Länge / 50 m length
Art.-Nr. / Cat. No FFPBLFFPGR
6 m Länge / 6 m length
Art.-Nr. / Cat. No FFPBL6FFPGR6
50 m Länge / 50 m length
Art.-Nr. / Cat. No FRGBLFRGGR
6 m Länge / 6 m length
Art.-Nr. / Cat. No FRGBL6FRGGR6
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 15
Beschläge & Zubehör / Fittings & Accessories
Türbänd mit Rahmenteil, eckig Hinge with frame pivot, square
Art.-Nr. / Cat. No. FHSSA FHSBN
• Für 8 - 10 mm Glas
• Max. Türgewicht: 50 kg
• Max Türbreite: 1.000 mm
• Max Türhöhe mit 2 Scharniere: 2.200 mm
• Max Türhöhe mit 3 Scharniere: 2.600 mm
• For 8 - 10 mm glass
• Max door weight: 50 kg
• Max door width: 1,000 mm
• Max door height with 2 hinges: 2,200 mm
• Max door height with 3 hinges: 2,600 mm
Türbänd mit Rahmenteil, rund Hinge with frame pivot, round
Art.-Nr. / Cat. No. FHDSA FHDBN
• Für 8 - 10 mm Glas
• Max. Türgewicht: 50 kg
• Max Türbreite: 1.000 mm
• Max Türhöhe mit 2 Scharniere: 2.200 mm
• Max Türhöhe mit 3 Scharniere: 2.600 mm
• For 8 - 10 mm glass
• Max door weight: 50 kg
• Max door width: 1,000 mm
• Max door height with 2 hinges: 2,200 mm
• Max door height with 3 hinges: 2,600 mm
Hammerkopfmutter XL für 10-12 mm Glas Hammer head nut XL for 10-12 mm glass
Art.-Nr. / Cat. No. FXHHN
Unterlegplatte XL für Dorma Türband, 10-12mm Glas Support plate XL for Dorma hinge, 10-12 mm glass
Art.-Nr. / Cat. No. FXCU
Schlosskasten inkl. Profilzylinder, eckig Latch with cylinder, square
Art.-Nr. / Cat. No. FLKSSA FLKSBN
Schlosskasten inkl. Profilzylinder, rund Latch with cylinder, round
Art.-Nr. / Cat. No. FLKDSAFLKDBN
Schlosskasten, nicht abschließbar, eckig Non-locking latch, square
Art.-Nr. / Cat. No. FLSSA FLSBN
Schlosskasten, nicht abschließbar, rund Non-locking latch, round
Art.-Nr. / Cat. No. FLDSA FLDBN
Drückergriffgarnitur, rund Handle set, round
Art.-Nr. / Cat. No. FLHSA FLHBN
Montageschlüssel Installation key
Art.-Nr. / Cat. No. EUOKEY
33 45
20
60 61
45
30 55
ø20
ø2033 45
ø4560 61
ø4560 61
ø4560 61
ø4560 61
ø20
8
ø20
ø18
137
57
21
10,5
M5
621
10,5
M5
6
60 61
45
60 61
45
60 61
45
150
66
21,5
21,5
1,5
1,5
26
13
M5
86
21,5 1,5
150
66
21,5
21,5
1,5
1,5
26
13
M5
86
21,5 1,5
16 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Beschläge & Zubehör / Fittings & Accessories
Schließblech XL Striking plate XL
Art.-Nr. / Cat. No. FXSP
Schließblech Dorma XL Striking plate Dorma XL
Art.-Nr. / Cat. No. FXDSP
Boden-und Eckverbinder XL Corner connector XL
Art.-Nr. / Cat. No. FFCC
90° Verbinder (horizontal) XL für Boden- und Deckenprofile 90° connector (horizontal) XL for floor and ceiling profiles
Art.-Nr. / Cat. No. FXCH
Fixrahmenprofile Verbinder XL Top frame and frame connector XL
Art.-Nr. / Cat. No. FFCCL
Z-Verbinder XL Z-connector XL
Art.-Nr. / Cat. No. FXCZ
16,1
M5
3
30
30
15,8
3
30
60
M5
42
42
15,8
M5
3
150
66
21,5
21,5
1,5
1,5
26
13
M5
86
21,5 1,5
150
66
21,5
21,5
1,5
1,5
26
13
M5
86
21,5 1,5
150
66
21,5
21,5
1,5
1,5
26
13
M5
86
21,5 1,5
150
66
21,5
21,5
1,5
1,5
26
13
M5
86
21,5 1,5
105
15,8
3
M5
14,2
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 17
Luftschalldämmung nach EN ISO 10140Airborne sound insulation to EN ISO 10140
Der erzielbare Schalldämmwert ist abhängig von der eingesetzten Glasdicke bzw. dem Glasaufbau bei Doppelverglasung, dem Anschluss an den Baukörper, sowie den bauakustischen Eigenschaften der flankierenden Bauteile.
Wir beraten Sie gerne persönlich.
The achievable sound insulation value depends on the used glass thickness, glass construction in case of installed double glazing, connection to the structure, as well as on the building acoustic properties of the flanking building parts.
We will be pleased to advise you personally.
Konfiguration A / Setup A
Glastür inkl.Absenkdichtung mitGlas-Seitenteilenund -Oberlicht
Glass door incl. drop-down seal with glass side panels and fanlight
Konfiguration B / Setup B
Holz-Schallschutztürinkl. Absenkdichtungmit Glas-Seitenteilenund -Oberlicht
Wooden sound-proof door incl. drop-down seal with glass side panels and fanlight
Konfiguration C / Setup C
Fixverglasung Fixed glazing 40dB37dB 42dB
18 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
CRL Glastrennwand-Verbinder für 180°• 3 Meter Länge • Schafft eine absolut klare und filigrane Stoßfuge zwischen zwei Glasscheiben• Bietet eine optimale Lösung zur Verbesserung der allgemeinen Ästhetik von Glas-
Trennwandsystemen• Im Gegensatz zu Nassverglasungen mit Silikon-Dichtstoffen sind die glasklaren EZ- Glas
Trennwandverbinder einfach anzuwenden, ersparen mühevollen Arbeitsaufwand beim Abdecken/Auftragen des Silikons, die nachträgliche Fertigstellung der Silikon-Übergänge am nächsten Tag und Reinigung
• Leichtes Zuschneiden, keine Blasenbildung wie bei Silikondichtstoffen und kein nachteiliger Einfluss auf Verbundglas
• Perfekte und schnelle Verarbeitung von satiniertem Glas!
CRL glass partition 180° joint
• 3 m length• A clear slimline finish between two glass panels• Provide a sleek and minimal finish to enhance the overall aesthetics of glass partition systems• Unlike wet glazing with silicone sealants, EZ-Glaze Crystal clear joint strips are easy to apply, saving
the labour required to mask and apply silicone, plus the clean-up• Cuts easily, will not bubble like silicone sealants and will not adversely affect laminated glass• Perfect and quick installation of glass
Art.-Nr. / Cat. No.
EZCC88 8,8 mm VSG / Laminated Glass
EZCC10 10 mm ESG / Toughened Glass
EZCC108 10,8 mm VSG / Laminated Glass
EZCC12 12 mm ESG / Toughened Glass
EZCC128 12,8 mm VSG / Laminated Glass
EZCC168 16,8 mm VSG / Laminated Glass
CRL Glastrennwand-Verbinder für 135°• 3 Meter Länge • Schafft eine absolut klare und filigrane Stoßfuge zwischen zwei Glasscheiben• Bietet eine optimale Lösung zur Verbesserung der allgemeinen Ästhetik von Glas-
Trennwandsystemen• Im Gegensatz zu Nassverglasungen mit Silikon-Dichtstoffen sind die glasklaren EZ- Glas
Trennwandverbinder einfach anzuwenden, ersparen mühevollen Arbeitsaufwand beim Abdecken/Auftragen des Silikons, die nachträgliche Fertigstellung der Silikon-Übergänge am nächsten Tag und Reinigung
• Leichtes Zuschneiden, keine Blasenbildung wie bei Silikondichtstoffen und kein nachteiliger Einfluss auf Verbundglas
• Perfekte und schnelle Verarbeitung von satiniertem Glas!
CRL glass partition 135° joint
• 3 m length• A clear slimline finish between two glass panels• Provide a sleek and minimal finish to enhance the overall aesthetics of glass partition systems• Unlike wet glazing with silicone sealants, EZ-Glaze Crystal clear joint strips are easy to apply, saving
the labour required to mask and apply silicone, plus the clean-up• Cuts easily, will not bubble like silicone sealants and will not adversely affect laminated glass• Perfect and quick installation of glass
Art.-Nr. / Cat. No.
EZCA10 10 mm ESG / Toughened Glass
EZCA108 10,8 mm VSG / Laminated Glass
EZCA12 12 mm ESG / Toughened Glass
EZCA128 12,8 mm VSG / Laminated Glass
Glastrennwandverbindungen Glass Joints
2 mm
2 mm2 mm
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 19
CRL Glastrennwand-Verbinder für Stoßverbindungen • 3 Meter Länge • Schafft eine absolut klare und filigrane Stoßfuge zwischen zwei Glasscheiben• Bietet eine optimale Lösung zur Verbesserung der allgemeinen Ästhetik von Glas-
Trennwandsystemen• Im Gegensatz zu Nassverglasungen mit Silikon-Dichtstoffen sind die glasklaren EZ-
Glas Trennwandverbinder einfach anzuwenden, ersparen mühevollen Arbeitsaufwand beim Abdecken/Auftragen des Silikons, die nachträgliche Fertigstellung der Silikon-Übergänge am nächsten Tag und Reinigung
• Leichtes Zuschneiden, keine Blasenbildung wie bei Silikondichtstoffen und kein nachteiliger Einfluss auf Verbundglas
• Perfekte und schnelle Verarbeitung von satiniertem Glas!
CRL glass abutment joint
• 3 m length• A clear slimline finish between two glass panels• Provide a sleek and minimal finish to enhance the overall aesthetics of glass partition systems• Unlike wet glazing with silicone sealants, EZ-Glaze Crystal clear joint strips are easy to apply,
saving the labour required to mask and apply silicone, plus the clean-up• Cuts easily, will not bubble like silicone sealants and will not adversely affect laminated glass• Perfect and quick installation of glass
Art.-Nr. / Cat. No.
EZCE10 10 mm ESG / Toughened Glass
EZCE108 10,8 mm VSG / Laminated Glass
EZCE12 12 mm ESG / Toughened Glass
EZCE128 12,8 mm VSG / Laminated Glass
CRL Glastrennwand T-Verbinder • 3 Meter Länge • Schafft eine absolut klare und filigrane Stoßfuge zwischen zwei Glasscheiben• Bietet eine optimale Lösung zur Verbesserung der allgemeinen Ästhetik von Glas-
Trennwandsystemen• Im Gegensatz zu Nassverglasungen mit Silikon-Dichtstoffen sind die glasklaren EZ-
Glas Trennwandverbinder einfach anzuwenden, ersparen mühevollen Arbeitsaufwand beim Abdecken/Auftragen des Silikons, die nachträgliche Fertigstellung der Silikon-Übergänge am nächsten Tag und Reinigung
• Leichtes Zuschneiden, keine Blasenbildung wie bei Silikondichtstoffen und kein nachteiliger Einfluss auf Verbundglas
• Perfekte und schnelle Verarbeitung von satiniertem Glas!
CRL glass 3-way joint
• 3 m length• A clear slimline finish between two glass panels• Provide a sleek and minimal finish to enhance the overall aesthetics of glass partition systems• Unlike wet glazing with silicone sealants, EZ-Glaze Crystal clear joint strips are easy to apply,
saving the labour required to mask and apply silicone, plus the clean-up• Cuts easily, will not bubble like silicone sealants and will not adversely affect laminated glass• Perfect and quick installation of glass
Art.-Nr. / Cat. No.
EZCT10 10 mm ESG / Toughened Glass
EZCT108 10,8 mm VSG / Laminated Glass
EZCT12 12 mm ESG / Toughened Glass
EZCT128 12,8 mm VSG / Laminated Glass
CRL 90° Glastrennwand Stoß - Eckverbinder• 3 Meter Länge • Perfekte Eckverbindung• Schafft eine absolut klare und filigrane Stoßfuge zwischen zwei Glasscheiben• Bietet eine optimale Lösung zur Verbesserung der allgemeinen Ästhetik von Glas-
Trennwandsystemen• Im Gegensatz zu Nassverglasungen mit Silikon-Dichtstoffen sind die glasklaren EZ- Glas
Trennwandverbinder einfach anzuwenden, ersparen mühevollen Arbeitsaufwand beim Abdecken/Auftragen des Silikons, die nachträgliche Fertigstellung der Silikon-Übergänge am nächsten Tag und Reinigung
• Leichtes Zuschneiden, keine Blasenbildung wie bei Silikondichtstoffen und kein nachteiliger Einfluss auf Verbundglas
• Perfekte und schnelle Verarbeitung von satiniertem Glas!
CRL glass 90° corner joint
• 3 m length• A clear slimline finish between two glass panels• Provide a sleek and minimal finish to enhance the overall aesthetics of glass partition systems• Unlike wet glazing with silicone sealants, EZ-Glaze Crystal clear joint strips are easy to apply,
saving the labour required to mask and apply silicone, plus the clean-up• Cuts easily, will not bubble like silicone sealants and will not adversely affect laminated glass• Perfect and quick installation of glass
Art.-Nr. / Cat. No.
EZCL10 10 mm ESG / Toughened Glass
EZCL108 10,8 mm VSG / Laminated Glass
EZCL12 12 mm ESG / Toughened Glass
EZCL128 12,8 mm VSG / Laminated Glass
Glastrennwandverbindungen / Glass Joints
2 mm
2 mm
2 mm
20 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
CRL steckbare Glasverbinder für 180˚• 3 Meter Länge• Klares Glasverbindungssystem• Einfach über die Glasverbindung zu stecken• Spart Zeit und Geld• Sicher bei Verbundglas• Stark haftendes Acrylband beidseitig
CRL clip-on seals - 180˚ in-line 2 way• 3 m lengths• Clear glass joint system• Clips over the glass joint• Saves time and money• Safe with laminated glass• With adhesive tape strip
CRL steckbare Glasverbinder für 90˚ • 3 Meter Länge• Klares Glasverbindungssystem• Einfach über die Glasverbindung zu stecken• Spart Zeit und Geld• Sicher bei Verbundglas• Stark haftendes Acrylband auf der mittigen 90 Grad Seite
zur sicheren Fixierung
CRL clip-on seals - 90˚ 2 way• 3 m lengths• Clear glass joint system• Clips over the glass joint• Saves time and money• Safe with laminated glass• With adhesive tape strip
CRL steckbare T- Glasverbinder für 90˚• 3 Meter Länge• Klares Glasverbindungssystem• Einfach über die Glasverbindung zu stecken• Spart Zeit und Geld• Sicher bei Verbundglas• Stark haftendes Acrylband auf der mittigen 90 Grad Seite
zur sicheren Fixierung
CRL clip-on seals - 90˚ 3 way• 3 m lengths• Clear glass joint system• Clips over the glass joint• Saves time and money• Safe with laminated glass• With adhesive tape strip
CRL steckbare T- Glasverbinder für 135˚• 3 Meter Länge• Klares Glasverbindungssystem• Einfach über die Glasverbindung zu stecken• Spart Zeit und Geld• Sicher bei Verbundglas• Stark haftendes Acrylband beidseitig
CRL clip-on seals - 135˚ 2 way• 3 m lengths• Clear glass joint system• Clips over the glass joint• Saves time and money• Safe with laminated glass• With adhesive tape strip
CRL Saugheber mit Ratschen-Anziehspanner• Verwendet S108 Saugheber Montagepunkte• Zieht mit ungeheurer Kraft an• Ideal für Tischplatten, Marmor, Granit, Parkett, Spiegel, Glas usw.• Tragkraft 147 kg• S108 Vakuum-Saugheber im Lieferumfang
CRL vacuum ratchet tensioning kit• Uses S108 vacuum lifter mounting points• Pulls with tremendous force• Ideal for glass and mirrors• 147kg lifting capacity• S108 vacuum lifters included
Art.-Nr. / Cat. No.
CLON10 10 mm ESG / Toughened Glass
CLON108 10,8 mm VSG / Laminated Glass
CLON12 12 mm ESG / Toughened Glass
CLON128 12,8 mm VSG / Laminated Glass
Art.-Nr. / Cat. No.
CLON210 10 mm ESG / Toughened Glass
CLON2108 10,8 mm VSG / Laminated Glass
CLON212 12 mm ESG / Toughened Glass
CLON2128 12,8 mm VSG / Laminated Glass
Art.-Nr. / Cat. No.
CLON310 10 mm ESG / Toughened Glass
CLON3108 10,8 mm VSG / Laminated Glass
CLON312 12 mm ESG / Toughened Glass
CLON3128 12,8 mm VSG / Laminated Glass
Art.-Nr. / Cat. No.
CLON410 10 mm ESG / Toughened Glass
CLON4108 10,8 mm VSG / Laminated Glass
CLON412 12 mm ESG / Toughened Glass
CLON4128 12,8 mm VSG / Laminated Glass
Art.-Nr. / Cat. No.
G0284
Glastrennwandverbindungen / Glass Joints
1,1mm
1,1mm
1,1mm
1,1mm
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 21
CRL steckbare Glasverbinder für 180˚• 3 Meter Länge• Klares Glasverbindungssystem• Einfach über die Glasverbindung zu stecken• Spart Zeit und Geld• Sicher bei Verbundglas• Stark haftendes Acrylband beidseitig
CRL clip-on seals - 180˚ in-line 2 way• 3 m lengths• Clear glass joint system• Clips over the glass joint• Saves time and money• Safe with laminated glass• With adhesive tape strip
CRL steckbare Glasverbinder für 90˚ • 3 Meter Länge• Klares Glasverbindungssystem• Einfach über die Glasverbindung zu stecken• Spart Zeit und Geld• Sicher bei Verbundglas• Stark haftendes Acrylband auf der mittigen 90 Grad Seite
zur sicheren Fixierung
CRL clip-on seals - 90˚ 2 way• 3 m lengths• Clear glass joint system• Clips over the glass joint• Saves time and money• Safe with laminated glass• With adhesive tape strip
CRL steckbare T- Glasverbinder für 135˚• 3 Meter Länge• Klares Glasverbindungssystem• Einfach über die Glasverbindung zu stecken• Spart Zeit und Geld• Sicher bei Verbundglas• Stark haftendes Acrylband beidseitig
CRL clip-on seals - 135˚ 2 way• 3 m lengths• Clear glass joint system• Clips over the glass joint• Saves time and money• Safe with laminated glass• With adhesive tape strip
CRL Saugheber mit Ratschen-Anziehspanner• Verwendet S108 Saugheber Montagepunkte• Zieht mit ungeheurer Kraft an• Ideal für Tischplatten, Marmor, Granit, Parkett, Spiegel, Glas usw.• Tragkraft 147 kg• S108 Vakuum-Saugheber im Lieferumfang
CRL vacuum ratchet tensioning kit• Uses S108 vacuum lifter mounting points• Pulls with tremendous force• Ideal for glass and mirrors• 147kg lifting capacity• S108 vacuum lifters included
U-Profile / U-profiles
Tiefes Aluminium U-Profile• Tiefes Profil sichert hervorragend Festteile
aus Glas• Nassverglasung mit klarem Silikon zur
Sicherung des Glases• Endkappen verdecken die Profilenden• Mit ESG verwenden
Aluminium deep U-channels• Deep pocket does excellent job of securing fixed
panels of glass• Wet glazed with clear silicone to secure glass• End caps offered to conceal ends of channel• Use monolithic toughened glass
Art.-Nr. / Cat. No.
SDCD516BA Hell eloxiert - 2,49 m - 8 mm Glas Brushed anodised - 2,49 m - 8 mm glassSDCD516BN Edelstahloptik gebürstet - 2,49 m - 8 mm Glas Brushed nickel - 2,49 m - 8 mm glass
SDCD38BA Hell eloxiert - 2,49 m - 10 mm Glas Brushed anodised - 2,49 m - 10 mm glassSDCD38BN Edelstahloptik gebürstet - 2,49 m - 10 mm Glas Brushed nickel - 2,49 m - 10 mm glassSDCD3812BA Hell eloxiert - 3,65 m - 10 mm Glas Brushed anodised - 3,65 m - 10 mm glassSDCD3812BN Edelstahloptik gebürstet - 3,65 m - 10 mm Glas Brushed nickel - 3,65 m - 10 mm glass
SDCD12BA Hell eloxiert - 2,49 m - 12 mm Glas Brushed anodised - 2,49 m - 12 mm glassSDCD12BN Edelstahloptik gebürstet - 2,49 m - 12 mm Glas Brushed nickel - 2,49 m - 12 mm glassSDCD1212BA Hell eloxiert - 3,65 m - 12 mm Glas Brushed anodised - 3,65 m - 12 mm glassSDCD12BN Edelstahloptik gebürstet - 3,65 m - 12 mm Glas Brushed nickel - 3,65 m - 12 mm glass
Standard Aluminium U-Profile• Länge: 2,49 m• Nassverglasung mit klarem Silikon
zur Sicherung von Festteilen aus Glas• Niedrigeres Profil ermöglicht maximale Sicht
auf das Glas• Mit ESG verwenden
Aluminium regular U-channels• Length: 2.49 m• Wet glazed with clear silicone to secure fixed
panels of glass• Lower profile allows maximum glass exposure• Use monolithic toughened glass
Art.-Nr. / Cat. No
SDCR38BA Hell eloxiert - 10 mm Glas Brushed anodised - 10 mm glassSDCR38BN Edelstahloptik gebürstet - 10 mm Glas Brushed nickel - 10 mm glass
SDCR12BA Hell eloxiert - 12 mm Glas Brushed anodised - 12 mm glassSDCR12BN Edelstahloptik gebürstet - 12 mm Glas Brushed nickel - 12 mm glass
Aluminium U-Profile für Trockenverglasung• Länge: 2,49 m• Vertiefung im Bodenprofil verbirgt die
Dichtungsfuge• Klares Vinyl sichert das Glas im Profil und
macht unschöne Silikonarbeiten überflüssig• Mit ESG verwenden
Aluminium dry-glaze U-channels• Length: 2.49 m• Recess in bottom channel hides caulk line• Clear vinyl’s secure glass in channel and
eliminate the need for messy silicone
• Use monolithic toughened glass
Art.-Nr. / Cat. No
DUC516BA Hell eloxiert - 8 mm Glas Brushed anodised - 8 mm glass
DUC516BN Edelstahloptik gebürstet - 8 mm Glas Brushed nickel - 8 mm glass
DUC38BA Hell eloxiert - 10 mm Glas Brushed anodised - 10 mm glass
DUC38BN Edelstahloptik gebürstet - 10 mm Glas Brushed nickel - 10 mm glass
19mm
8,6mm
12,7mm
10,2mm
14,3mm
19mm
19mm
13,1mm
17,2mm
9,5 mm
10,2 mm
14,3 mm
9,5mm
13,1mm
17,2mm
SCHRITT 3Fertigstellen durch Sichern des U-Profils
STEP 3 Complete by securing U-Channel
SCHRITT 4Fertig!
STEP 4 Done!
SCHRITT 1Befestigen der flexiblen Vinyldichtung für den Innenbereich der Duschkabine
STEP 1 Fix flexible vinyl for interior of Shower
SCHRITT 2Befestigen der steifen Vinyldichtung für die Außenseite der Duschkabine
STEP 2 Fix rigid leg vinyl for exterior of shower
12mm
19mm
16,4mm
2,4mm
19mm
SDCD38BA/BN, SDCD3812BA/BN
SDCD12BA/BN, SDCD1212BA/BN
SDCD516BA/BN
SDCR38BA/BN
SDCR12BA/BN
22 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Flexibles Vinyl für DUC U-ProfileFlexible vinyl for DUC U-channels
Steifes Vinyl für DUC U-ProfileRigid vinyl for DUC U-channels
Art.-Nr. / Cat. No.
FV4DUC 10 mm Glas 10 mm glass
FV8DUC 8 mm Glas 8 mm glass
RV4DUC 10 mm Glas 10 mm glass
RV8DUC 8 mm Glas 8 mm glass
EndkappeEnd caps
Art.-Nr. / Cat. No.
SDCEC38CH Chrom, für SDCD38BA Chrome, for SDCD38BA
SDCEC38BN Edelstahloptik gebürstet, für SDCD38BN Brushed nickel, for SDCD38BN
SDCEC12CH Chrom, für SDCD12BA Chrome, for SDCD12BA
SDCEC12BN Edelstahloptik gebürstet, für SDCD12BN Brushed nickel, for SDCD12BN
Aluminium U-Profile zum Einlassen• Länge: 2,49 m• Ideal zum Einlassen des Glases und für einen
Ganzglas-Look• Profil oben abgewinkelt, um Wasser besser
ableiten zu können• Oberer Rand verdeckt Fliesenabschluss
Aluminium recessed U-channels
• Length: 2.49 m• Ideal for recessing glass and creating the ‘all-glass’ look• Top of channel angled to assist with water deflection• Top lip helps cover edge of tile
Art.-Nr. / Cat. No.
SDCF38BA Hell eloxiert, 8-10 mm Glas Brushed anodised, 8-10 mm glassSDCF38BN Edelstahl gebürstet, 8-10 mm Glas Brushed nickel, 8-10 mm glass
SDCF12BA Hell eloxiert, 12 mm Glas Brushed anodised, 12 mm glassSDCF12BN Edelstahl gebürstet, 12 mm Glas Brushed nickel, 12 mm glass
Aluminium U-Profile 15 x 15 mm• Glasstärke: 10 mm bis 12 mm• Nassverglasung mit transparentem Silikon zur
Sicherung des Glases• 2 mm Wanddicke
Aluminium U-channels
• Glass thickness: 10 mm to 12 mm• Wet glazed with clear silicone to secure glass• 2 mm wall thickness
Art.-Nr. / Cat. No.
SDCD1515A Matt eloxiert, 2,5 m Anodised, 2.5 mSDCD1515BA Hochglanz eloxiert, 2,5 m Brushed anodised, 2.5 mSDCD1515BN Edelstahloptik, 2,5 m Brushed nickel, 2.5 m
SDCD1515CH Chrom, 3 m Chrome, 3 m 15mm
15mm
14mm17mm
14,5mm
10,2mm
21,5mm
U-Profile / U-profiles
16,5 mm
23,5 mm
13,16mm3 mm
3,5 mm
2 mm
14 mm17 mm
1,67 mm
15 mm
15 mm
11 mm
SDCD1515A/BA/BN
SDCD1515CH
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 23
Aluminium U-Profile 20 x 20 mm• Glasstärke: 10 mm bis 12 mm• Nassverglasung mit transparentem Silikon
zur Sicherung des Glases• 2 mm Wanddicke
Aluminium U-channels
• Glass thickness: 10 mm to 12 mm• Wet glazed with clear silicone to secure glass• 2 mm wall thickness
Art.-Nr. / Cat. No.
SDCD2020A Matt eloxiert, 2,5 m Anodised, 2.5 mSDCD2020BA Hochglanz eloxiert, 2,5 m Brushed anodised, 2.5 mSDCD2020BN Edelstahloptik, 2,5 m Brushed nickel, 2.5 m
SDCD2020CH Chrom, 3 m Chrome, 3 m
Aluminium U-Profile 30 x 20 mm• Glasstärke: 10 mm bis 12 mm• Nassverglasung mit transparentem Silikon
zur Sicherung des Glases• 2 mm Wanddicke
Aluminium U-channels
• Glass thickness: 10 mm to 12 mm• Wet glazed with clear silicone to secure glass• 2 mm wall thickness
Art.-Nr. / Cat. No.
SDCD3020A Matt eloxiert, 2,5 m Anodised, 2.5 mSDCD3020BA Hochglanz eloxiert, 2,5 m Brushed anodised, 2.5 mSDCD3020BN Edelstahloptik, 2,5 m Brushed nickel, 2.5 m
SDCD3020CH Chrom, 3 m Chrome, 3 m
Aluminium U-Profile 40 x 20 mm• Glasstärke: 10 mm bis 12 mm• Nassverglasung mit transparentem Silikon
zur Sicherung des Glases• 2 mm Wanddicke
Aluminium U-channels
• Glass thickness: 10 mm to 12 mm• Wet glazed with clear silicone to secure glass• 2 mm wall thickness
Art.-Nr. / Cat. No.
SDCD4020A Matt eloxiert, 2,5 m Anodised, 2.5 mSDCD4020BA Hochglanz eloxiert, 2,5 m Brushed anodised, 2.5 mSDCD4020BN Edelstahloptik, 2,5 m Brushed nickel, 2.5 m
SDCD4020CH Chrom, 3 m Chrome, 3 m
20mm
20mm
30mm
20mm
40mm
20mm
20 mm
16 mm
20 mm
30 mm
20 mm
16 mm
40 mm
16 mm
20 mm
SDCD2020A/BA/BN
SDCD3020A/BA/BN
SDCD4020A/BA/BN
SDCD2020CH
SDCD3020CH
SDCD4020CH
24 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Glasbeschläge / Glass Fittings
Beidseitiger hydraulischer Glas-Wand Beschlag• Schließgeschwindigkeit einstellbar• Schwenkt 90° ein und aus, mit Feststellung
bei 0º, +90º, und -90º• Maximales Türgewicht 100 kg• Maximale Türbreite 1.000 mm• Für 8 bis zu 13,52 mm Glasstärke
Oil dynamic full back plate wall to glass hinge• Adjustable closing speed, self-closing• Swings in and out a full 90º, with stops at
0º,+90º, and –90º• Max door weight: 100 kg• Max door width: 1,000 mm • For 8 to 13,52 mm glass
Standard Standard
Art.-Nr. / Cat. No.
H8010CH Mit Feststellung, Chrom With hold open, Chrome
H8010SA Mit Feststellung, Aluminium gebürstet With hold open, Satin anodised
H8010SN Mit Feststellung, Edelstahl gebürstet With hold open, Satin nickel
H8210CH Ohne Feststellung, Chrom No hold open, Chrome
H8210SA Ohne Feststellung, Aluminium gebürstet No hold open, Satin anodised
H8210SN Ohne Feststellung, Edelstahl gebürstet No hold open, Satin nickel
Für hohe Beständigkeit in feuchten Umgebungen For damp/humid environment
Art.-Nr. / Cat. No.
H8010BTCH* Mit Feststellung, Chrom With hold open, Chrome
H8010BTSA* Mit Feststellung, Aluminium gebürstet With hold open, Satin anodised
H8010BTSN* Mit Feststellung, Edelstahl gebürstet With hold open, Satin nickel
H8210BTCH* Ohne Feststellung, Chrom No hold open, Chrome
H8210BTSA* Ohne Feststellung, Aluminium gebürstet No hold open, Satin anodised
H8210BTSN* Ohne Feststellung, Edelstahl gebürstet No hold open, Satin nickel
Für Außenbereiche For outdoor use
Art.-Nr. / Cat. No.
H8010JCBS** Justierbare Verkleidungsbleche, Edelstahl gebürstet Adjustable clad option, Brushed stainless
H8010JCPS** Justierbare Verkleidungsbleche, Edelstahl poliert Adjustable clad option, Polished stainless
Einseitiger hydraulischer Glas-Wand Beschlag• Schließgeschwindigkeit einstellbar• Schwenkt 90° ein und aus, mit Feststellung
bei 0º, +90º, und -90º• Maximales Türgewicht 100 kg• Maximale Türbreite 1.000 mm• Für 8 bis 13,52 mm Glasstärke
Oil dynamic offset back plate wall to glass hinge • Adjustable closing speed, self-closing• Swings in and out a full 90º, with stops at 0º,
+90º, and –90º• Max door weight: 100 kg• Max door width: 1,000 mm • For 8 to 13,52 mm glass
Standard Standard
Art.-Nr. / Cat. No.
H8011CH Mit Feststellung, Chrom With hold open, Chrome
H8011SA Mit Feststellung, Aluminium gebürstet With hold open, Satin anodised
H8011SN Mit Feststellung, Edelstahl gebürstet With hold open, Satin nickel
H8211CH Ohne Feststellung, Chrom No hold open, Chrome
H8211SA Ohne Feststellung, Aluminium gebürstet No hold open, Satin anodised
H8211SN Ohne Feststellung, Edelstahl gebürstet No hold open, Satin nickel
Für hohe Beständigkeit in feuchten Umgebungen For damp/humid environment
Art.-Nr. / Cat. No.
H8011BTCH* Mit Feststellung, Chrom With hold open, Chrome
H8011BTSA* Mit Feststellung, Aluminium gebürstet With hold open, Satin anodised
H8011BTSN* Mit Feststellung, Edelstahl gebürstet With hold open, Satin nickel
H8211BTCH* Ohne Feststellung, Chrom No hold open, Chrome
H8211BTSA* Ohne Feststellung, Aluminium gebürstet No hold open, Satin Anodised
H8211BTSN* Ohne Feststellung, Edelstahl gebürstet No hold open, Satin Nickel
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 25
Hydraulischer Glas-Glas Beschlag• Schließgeschwindigkeit einstellbar• Schwenkt 90° ein und aus, mit Feststellung
bei 0º, +90º, und -90º• Maximales Türgewicht 80 kg• Maximale Türbreite 1.000 mm• Für 8 mm bis 13,52 mm Glasstärke
Oil dynamic glass to glass hinge• Adjustable closing speed, self-closing• Swings in and out a full 90º, with stops at 0º,
+90º, and –90º. • Max door weight: 80 kg• Max door width: 1,000 mm • For 8 to 13,52 mm glass
Standard Standard
Art.-Nr. / Cat. No.
H8015CH Mit Feststellung, Chrom With hold open, Chrome
H8015SA Mit Feststellung, Aluminium gebürstet With hold open, Satin anodised
H8015SN Mit Feststellung, Edelstahl gebürstet With hold open, Satin nickel
H8215CH Ohne Feststellung, Chrom No hold open, Chrome
H8215SA Ohne Feststellung, Aluminium gebürstet No hold open, Satin anodised
H8215SN Ohne Feststellung, Edelstahl gebürstet No hold open, Satin nickel
Für hohe feuchtigkeitsbeständigkeit in feuchten Umgebungen For damp/humid environment
Art.-Nr. / Cat. No.
H8015BTCH* Mit Feststellung, Chrom With hold open, Chrome
H8015BTSA* Mit Feststellung, Aluminium gebürstet With hold open, Satin anodised
H8015BTSN* Mit Feststellung, Edelstahl gebürstet With hold open, Satin nickel
H8215BTCH* Ohne Feststellung, Chrom No hold open, Chrome
H8215BTSA* Ohne Feststellung, Aluminium gebürstet No hold open, Satin anodised
H8215BTSN* Ohne Feststellung, Edelstahl gebürstet No hold open, Satin nickel
Für Außenbereiche For outdoor use
Art.-Nr. / Cat. No.
H8015JCBS** Justierbare Verkleidungsbleche, Edelstahl gebürstet Adjustable clad option, Brushed stainless
H8015JCPS** Justierbare Verkleidungsbleche, Edelstahl poliert Adjustable clad option, Polished stainless
Hydraulischer Glas-Wand Beschlag für gefälzte Türrahmen• Schließgeschwindigkeit einstellbar• Zum Einsatz mit gefälzten Türrahmen• Schwenkt 90 Grad aus• Stoppt bei 90 Grad• Offenhaltung• Maximales Türgewicht 100 kg• Maximale Türbreite 1.000 mm• Für 8 mm bis 12 mm ESG
Oil dynamic rebated wall to glass hinge• Adjustable closing speed, self-closing• For use with rebated door frames• Swings out 90 degrees• Stops at 90 degrees• Max door weight: 100 kg• Max door width: 1,000 mm • For 8 to 12 mm glass
Standard Standard
Art.-Nr. / Cat. No.
H8060CH Mit Feststellung, Chrom With hold open, Chrome
H8060SA Mit Feststellung, Aluminium gebürstet With hold open, Satin anodised
H8060SN Mit Feststellung, Edelstahloptik With hold open, Satin nickel
H8260CH Ohne Feststellung, Chrom No hold open, Chrome
H8260SA Ohne Feststellung, Aluminium gebürstet No hold open, Satin anodised
H8260SN Ohne Feststellung, Edelstahloptik No hold open, Satin nikel
Für hohe feuchtigkeitsbeständigkeit in feuchten Umgebungen For damp/humid environment
Art.-Nr. / Cat. No.
H8060BTCH* Mit Feststellung, Chrom With hold open, Chrome
H8060BTSA* Mit Feststellung, Aluminium gebürstet With hold open, Satin anodised
H8060BTSN* Mit Feststellung, Edelstahloptik With hold open, Satin nickel
H8260BTCH* Ohne Feststellung, Chrom No hold open, Chrome
H8260BTSA* Ohne Feststellung, Aluminium gebürstet No hold open, Satin anodised
H8260BTSN* Ohne Feststellung, Edelstahloptik No hold open, Satin nikel
* BT-Serie: bei Einsatz in Feuchtbereichen wie Duschen, Saunen und Dampfbädern ist die Montage des Pin aus rostfreiem Stahl INOX AISI 420 und der Viton-OR-Ringe erforderlich.
* BT Series mount the pin in INOX AISI 420 stainless steel and Viton OR-rings to resist to wet areas such as showers, saunas and steam baths.
** Korrosionsschutz: komplett eloxierter Innenkörper, tiefe Oxidation (20 Mikron und vollflächige Ummantelung mit Abdeckungen aus Edelstahl AISI 316. ** Features a complete anodized inner body, deep oxidation (20 micron) and coating of the entire surface with covers made of stainless steel AISI 316 to resist to corrosion.
26 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Selbstschießender Eckbeschlag• Wird einfach auf dem Boden
verschraubt - kein Bodenaushub erforderlich!
• Zwei Schließgeschwindigkeiten einstellbar
• Ersetzt herkömmliche Überkopf- und Bodentürschließer
• Maximales Türgewicht 100 kg• Maximale Türbreite 1.000 mm• Für 8 bis 12 mm ESG
Hydraulic patch fittings with backcheck
• Flush mount - No hole required in the floor• Two adjustments available• Replaces traditional top and floor springs• Max door weight: 100 kg• Max door width: 1,000 mm • For 8 to 12 mm glass
Art.-Nr. / Cat. No.
CRL380BS Ohne Feststellung, Edelstahl gebürstet No hold open, Brushed stainless
CRL380PS Ohne Feststellung, Edelstahl poliert No hold open, Polished stainless
CRL380HBS Mit 90° Feststellung, Edelstahl gebürstet With 90° hold open, Brushed stainless
CRL380HPS Mit 90° Feststellung, Edelstahl poliert With 90° hold open, Polished stainless
Hydraulischer Eckbeschlag mit Dämpfung• Schließgeschwindigkeit einstellbar• Schwenkt 90° ein und aus, mit
Feststellung bei 0º, +90º, und -90º• Maximales Türgewicht 100 kg• Maximale Türbreite 1.000 mm• Für 8 bis 13,52 mm Glasstärke• Passende obere Eckbeschläge
verfügbar
Oil dynamic patch fitting closer with backcheck
• Closing speed can be adjusted• Swings in and out a full 90 degrees with
stops at 0º, +90º, and –90º.• Also available in no-hold open option• 100 kg max door weight• 1,000 mm max door width• For 8 to 13.52 mm toughened glass• Matching top patch fittings available
Eckbeschlag ohne Abdeckung Body of patch closer excludes cover
Art.-Nr. / Cat. No.
H100E10 Mit Dämpfung With backcheck
H100E10NF Ohne Dämpfung No backcheck
H100E10NHO Ohne Feststellung No hold open
Passender oberer Eckbeschlag
• Zur Verwendung mit H100EP1V
Matching top patch fitting• For use with H100EP1V
Art.-Nr. / Cat. No.
H100E20
Abdeckung für obere und untere Eckbeschläge für Außenbereiche
Cover for top and bottom patch fittings for outdoor use
Art.-Nr. / Cat. No.
H100ECBS Edelstahl gebürstet Brushed stainless
H100ECPS Edelstahl poliert Polished stainless
H100ECSA Aluminium gebürstet Satin anodised
Schraubenabdeckung, Ersatz
Replacement screw cover
Art.-Nr. / Cat. No.
H100EBC
Deckendrehpunkt
Top pivot plate
Art.-Nr. / Cat. No.
H100EP1V
Glasbeschläge / Glass Fittings
SDCD516BA/BN
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 27
Sure-Grip 203 mm Saugheber• Größte Tragkraft unter allen 203 mm Saughebern
mit Handpumpe - 68 kg Tragfähigkeit (3-facher Sicherheitsfaktor)
• Ergonomischer Pumpstößel für einfache Bedienung
• Vakuum-Verlustanzeige• Weicher konturierter Sicherheitsgriff für Komfort• Wird mit einem schützenden Transportkoffer
geliefert
S338 Sure-Grip 203 mm Vacuum Lifter• Greatest lifting capacity of any 203mm pump
activated vacuum lifter - 68 kg lifting capacity (security factor 3)
• One hand pump and attachment for safety when needed
• Superior “press-and-pump” attachment feature• Built-in vacuum loss indicator• Soft contoured sure-grip handle for comfort• Sturdy moulded carrying case
Art.-Nr. / Cat. No.
S338
Saugheber Wood’s POWR-GRIP®
• 203 mm Durchmesser• Prüfventil macht ein Nachpumpen ohne Verlust
des verbliebenen Vakuums möglich• Freigabe-Ventilhebel mit Sicherheitsschutz für eine
schnelle und vollständige Lösung des Vakuums• Schnelle, sichere Befestigung auf flachen,
unpörosen Oberflächen• Rote-Linie-Indikator warnt Benutzer vor
Vakuumverlust• Wird mit einem schützenden Transportkoffer
geliefert• Tragfähigkeit: 57 kg
Wood’s POWR-GRIP® vacuum cup• 203 mm diameter pad • Check valve allows re-pumping without loss of
remaining vacuum • Release valve lever permits quick and complete release • Fast attachment on smooth, non-porous flat surfaces • Red-line indicator warns user of any vacuum loss • Supplied with protective carrying case • 57 kg lifting capacity
Art.-Nr. / Cat. No.
N4000 Mit ABS-Griff With ABS handle
N4950 Mit Metalgriff With metal handle
Saugheber mit Handpumpe• 203 mm Durchmesser• Robuster 5 mm dicker ABS-Griff• Schnelle, sichere Befestigung auf flachen,
unporösen Oberflächen• Vier extra Befestigungspunkte erleichtern die
Befestigung an Hubrahmen, Hilfsgeräten und unserem Vakuum Ratschen-Spannkit
• Tragfähigkeit: 56 kg
Pump-Action Vacuum Lifter• 203 mm diameter pad• Heavy-duty 5mm thick ABS handle resists
bending, especially during heavy lifts• Fast, safe attachment to smooth,
non-porous flat surfaces• Four extra mounting points make it easy to
attach to metal lifting frames, jigs, and our vacuum ratchet tensioning kit
• 56 kg lifting capacity
Art.-Nr. / Cat. No.
S108
Werkzeuge und Zubehör / Tools and accessories
N4000
N4950
28 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Glasstrax Glastransportwagen• Glastransportwagen mit großer
Ladekapazität von 272 kg• Selbst-Klemmmechanismus klemmt eine Last bis
zu 50,8 mm Stärke fest• Eine Person kann laden und manövrieren
Glasstrax glass dolly• Safe glass transport with large 272 kg capacity• Self clamping action locks loads up to 50.8 mm thick• One person can load and manoeuvre
Art.-Nr. / Cat. No.
GT02
Klotzhebel• Handliches Werkzeug für alle Gaserarbeiten• Wählen Sie zwischen dem Klotzhebel aus Holz
und dem Klotzhebel mit robustem Holzgriff und strapazierfähigem Kunststoffkopf
Block levers• Handy tool for all glazing jobs• Choose either the all wood or the strong wooden
handle with hard-wearing plastic head block lever
Art.-Nr. / Cat. No.
0735 Klotzhebel mit Kunststoffkopf Plastic head block lever
0736 Klotzhebel aus Holz All wood block lever
Klotzhebel• Zum Heben und Einsetzen von Glasscheiben• Hilfreich bei fast allen Verglasungsarbeiten• Hilfreich bei der Fenstermontage• Breite: 273 mm
Plate glass lifting tool• For lifting and setting plate glass• Helps prevent lifting related injuries• Aids in storefront window installation• Width: 273 mm
Art.-Nr. / Cat. No.
PGL11
280 mm Vinyl-Roller mit blauem Griff• Gerändelter Griff und kugelgelagertes Rädchen• Ideal zum schnellen Einsetzen aller Arten vonFlach-
und Einrolldichtungen
280 mm blue handle vinyl roller tool• Knurl diamond grip and a ball bearing wheel• Ideal to install quickly all kind of flat and rolled gaskets
Art.-Nr. / Cat. No.
VR10
Werkzeuge und Zubehör / Tools and accessories
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 29
Glasstrax Glastransportwagen• Glastransportwagen mit großer
Ladekapazität von 272 kg• Selbst-Klemmmechanismus klemmt eine Last bis
zu 50,8 mm Stärke fest• Eine Person kann laden und manövrieren
Glasstrax glass dolly• Safe glass transport with large 272 kg capacity• Self clamping action locks loads up to 50.8 mm thick• One person can load and manoeuvre
Art.-Nr. / Cat. No.
GT02
Klotzhebel• Handliches Werkzeug für alle Gaserarbeiten• Wählen Sie zwischen dem Klotzhebel aus Holz
und dem Klotzhebel mit robustem Holzgriff und strapazierfähigem Kunststoffkopf
Block levers• Handy tool for all glazing jobs• Choose either the all wood or the strong wooden
handle with hard-wearing plastic head block lever
Art.-Nr. / Cat. No.
0735 Klotzhebel mit Kunststoffkopf Plastic head block lever
0736 Klotzhebel aus Holz All wood block lever
Klotzhebel• Zum Heben und Einsetzen von Glasscheiben• Hilfreich bei fast allen Verglasungsarbeiten• Hilfreich bei der Fenstermontage• Breite: 273 mm
Plate glass lifting tool• For lifting and setting plate glass• Helps prevent lifting related injuries• Aids in storefront window installation• Width: 273 mm
Art.-Nr. / Cat. No.
PGL11
280 mm Vinyl-Roller mit blauem Griff• Gerändelter Griff und kugelgelagertes Rädchen• Ideal zum schnellen Einsetzen aller Arten vonFlach-
und Einrolldichtungen
280 mm blue handle vinyl roller tool• Knurl diamond grip and a ball bearing wheel• Ideal to install quickly all kind of flat and rolled gaskets
Art.-Nr. / Cat. No.
VR10
Rasierklingen• Unsere meist verwendete einseitige Klinge• Präzisionsschliff, Chirurgenstahlkante• Jede Klinge einzeln umhüllt, um den Kantenschliff
zu schützen• Vielfältige Verwendungszwecke• 100 Stück pro Packung
Single edge razor blades• Our most popular single edge blade• Precision honed. surgical steel edges• Individually wrapped to protect the edge• Multiple uses• 100 per box
Art.-Nr. / Cat. No.
51S
Rasierklingenhalter und Schaber• Sicherer Halt für einseitige Metallrasierklingen• Bequemer Griff für sicheren Halt• Für die 51S und KKB12 Rasierklingen
Razor blade holder and scraper• Safely holds single edge metal razor blades• Comfortable handle for a sure grip• Compatible with 51S and KKB12 razor blades
Art.-Nr. / Cat. No.
RS65
Glas- und Spiegelreiniger• Das Top-Produkt der Glasindustrie• Ammoniak-Formel mit angenehmem Duft• 12 große 660 ml-Dosen je Karton
Glass and mirror cleaner• A long time favourite of the glass industry• Ammoniated formula with a pleasant aroma• 12 big 660ml cans per case
Art.-Nr. / Cat. No.
EB1701
Fusselfreie Glasreinigungstücher in Spenderschachtel• Feste, vierlagige Papierwischtücher sind praktisch
fusselfrei• Auf beiden Seiten verstärkter Nylonstoff, ideal für
nasse oder trockene Anwendung• Praktische Spenderschachtel
Lint free glass wipes• Strong, white four-ply paper wipes are virtually lint-free• Reinforced nylon scrim in both directions so they work
great wet or dry• Convenient pop-up dispenser box
Art.-Nr. / Cat. No.
BX15
CRL Putzpapier, weiß, 2-lagig• Industrielles Trockenpapier aus Recycling-Fasermaterial• 2-lagig, naturweiß• Besonders gut geeignet für zähe Flüssigkeiten, wie Öl
und Schmiere• Zertifiziert mit dem Nordic Swan Umweltzeichen• Zertifiziert mit dem EU-Ecolabel• 1.000 Blatt / Rolle, 38 x 22 cm• Verpackungseinheit: 2 Rollen
Cleaning paper, white, double thickness • Industrial cleaning paper made of recycled material• Double thickness, naturally white • Mainly suitable for tough liquids like oil and grease• Certified with the Nordic Swan for the environment• Certified with the green label • 1000 sheets / Roll, 38 x 22 cm • 2 rolls per packet
Art.-Nr. / Cat. No.
26502
Werkzeuge und Zubehör / Tools and accessories
30 w: crl.eu / crlaurence.co.uke: DE@crl.eu / crl@crlaurence.co.ukt: 00 800 0421 6144
Verglasungsklötze aus Kunststoff• Verschiedenfarbig je nach Dicke• Extrem belastbar und strapazierfähig, aus
Polypropylen• 1.000 Stück pro Packung
Plastic glazing blocks• Colour coded for easy selection by size• Polypropylene material is extremely durable• 1,000 of one size per box
Art.-Nr. / Cat. No.
KK201 100 x 20 x 1 mm
KK202 100 x 20 x 2 mm
KK203 100 x 20 x 3 mm
KK204 100 x 20 x 4 mm
KK205 100 x 20 x 5 mm
KK206 100 x 20 x 6 mm
Verglasungsklötze aus Holz• Verschiedenfarbig für einfache
Erkennung der Dicke• Allzweck Glaserklötze aus imprägniertem Holz• 100 Stück pro Packung
Wood glazing blocks• Colour coded for easy selection by size• Multi-purpose glazing blocks made of
impregnated wood• 100 per package
Art.-Nr. / Cat. No.
KH202 80 x 20 x 2 mm
KH203 100 x 20 x 3 mm
KH204 80 x 20 x 4 mm
KH205 80 x 20 x 5 mm
KH206 80 x 20 x 6 mm
Durchsichtige Verglasungsklötze aus Kunststoff• Kaum sichtbare Klötze• 80±5 Durometer Härte
Clear plastic setting blocks• Barely visible blocks• 80±5 durometer hardness
Art.-Nr. / Cat. No.
PSB040 1 x 6 x 50 mm
PSB080 2 x 6 x 50 mm
PSB125 3 x 6 x 50 mm
PSB156 4 x 6 x 50 mm
PSB250 6 x 6 x 50 mm
PSB375 9 x 6 x 50 mm
Eckenschutz• Schützt alle Glasecken vor Absplittern oder
anderweitigen Beschädigungen beim Transport oder der Lagerung
• Zerkratzt oder zerstört Glas-oder Spiegeloberflächen nicht und schützt große Ausschnitte vor Bruch oder Zerkratzen
• Eckenschutz ist wiederverwendbar und kann einfach aufgesteckt und abgezogen werden
• 1.000 Stück pro Packung
Corner protectors• Designed to protect glass and mirror edges during
shipping, handling or storing• Will not scratch or damage glass or mirror surfaces,
and help protect large cut-offs from breakage or becoming scrap
• Protectors are reusable, they simply slide on and off
• 1,000 per box
Art.-Nr. / Cat. No.
1463010K Für 10 mm Glas / For 10 mm glass
1463012K Für 12 mm Glas / For 12 mm glass
Werkzeuge und Zubehör / Tools and accessories
CRL Längle Office Trennwandsysteme / CRL Langle Office Partition Systems 31
Verglasungsklötze aus Kunststoff• Verschiedenfarbig je nach Dicke• Extrem belastbar und strapazierfähig, aus
Polypropylen• 1.000 Stück pro Packung
Plastic glazing blocks• Colour coded for easy selection by size• Polypropylene material is extremely durable• 1,000 of one size per box
Art.-Nr. / Cat. No.
KK201 100 x 20 x 1 mm
KK202 100 x 20 x 2 mm
KK203 100 x 20 x 3 mm
KK204 100 x 20 x 4 mm
KK205 100 x 20 x 5 mm
KK206 100 x 20 x 6 mm
Verglasungsklötze aus Holz• Verschiedenfarbig für einfache
Erkennung der Dicke• Allzweck Glaserklötze aus imprägniertem Holz• 100 Stück pro Packung
Wood glazing blocks• Colour coded for easy selection by size• Multi-purpose glazing blocks made of
impregnated wood• 100 per package
Art.-Nr. / Cat. No.
KH202 80 x 20 x 2 mm
KH203 100 x 20 x 3 mm
KH204 80 x 20 x 4 mm
KH205 80 x 20 x 5 mm
KH206 80 x 20 x 6 mm
Durchsichtige Verglasungsklötze aus Kunststoff• Kaum sichtbare Klötze• 80±5 Durometer Härte
Clear plastic setting blocks• Barely visible blocks• 80±5 durometer hardness
Art.-Nr. / Cat. No.
PSB040 1 x 6 x 50 mm
PSB080 2 x 6 x 50 mm
PSB125 3 x 6 x 50 mm
PSB156 4 x 6 x 50 mm
PSB250 6 x 6 x 50 mm
PSB375 9 x 6 x 50 mm
Eckenschutz• Schützt alle Glasecken vor Absplittern oder
anderweitigen Beschädigungen beim Transport oder der Lagerung
• Zerkratzt oder zerstört Glas-oder Spiegeloberflächen nicht und schützt große Ausschnitte vor Bruch oder Zerkratzen
• Eckenschutz ist wiederverwendbar und kann einfach aufgesteckt und abgezogen werden
• 1.000 Stück pro Packung
Corner protectors• Designed to protect glass and mirror edges during
shipping, handling or storing• Will not scratch or damage glass or mirror surfaces,
and help protect large cut-offs from breakage or becoming scrap
• Protectors are reusable, they simply slide on and off
• 1,000 per box
Art.-Nr. / Cat. No.
1463010K Für 10 mm Glas / For 10 mm glass
1463012K Für 12 mm Glas / For 12 mm glass
StuttgartBoschstrasse 7D-74360 IlsfeldDeutschlandTel: +49 (0) 7062 915 930Fax: +49 (0) 7062 915 93 16crl.eu
ManchesterCharles Babbage AvenueKingsway Business Park,Rochdale, OL16 4NW, EnglandTel: +44 (0) 1706 863 600Fax: +44 (0) 1706 869 860crlaurence.co.uk
CopenhagenStamholmen 70 Unit B,DK-2650 HvidovreDänemark Tel: +45 36 72 09 00Fax: +45 36 70 33 35crlaurence.dk
FranceBoschstrasse 7D-74360 IlsfeldDeutschlandTel: +49 (0) 7062 915 93 12Fax: +49 (0) 7062 915 93 16crlaurence.fr
KOSTENLOSER Anruf unter / Call FREE on 00 800 0421 6144KOSTENLOSES Fax unter / Fax FREE on 00 800 0262 3299
Recommended