name

Parameter TTX 400 TTX 150

Replacing Fluorescent 1x49W T5 2x49W T5 1x58W T8 1x49W T5 2x49W T5 1x58W T8

Input Power 29W 54W 32W 29W 54W 32W

Luminaire Efficacy * 138lm/W 126 lm/W 138lm/W 138lm/W 126 lm/W 138lm/W

Luminous Flux 4000lm 6800lm 4400lm 4000lm 6800lm 4400lm

Weight 1200g 1200g 1200g 1200g 1200g 1200g

M.O.L. 1474mm (58") 1480mm (58")

Input Voltage 220 - 240 VAC 50Hz

Power Supply Built-in Constant Current

Dimmable DALI or SEAK PLC

LED Light Engine Tridonic TALEXX module

Optical System Tridonic Linear Cover SY Transparent

Correlated Colour Temperature 4000K

Colour Rendering Index >80

IP Rating IP20

Typical Ambient Temperature 25C

Lumen Maintenance L70B50 >70 000 hours

Housing Colour White

Material Housing - Steel, Optical lenses - PMMA

Mounting Existing TTX fixation points

Warranty Six year limited warranty

CHARACTERISTICS

SEAK, s.r.o., Levosk 109

080 01 Preov, Slovakia

LED retrofit for TTX 400 and TTX 150 linear systems

CLARUS LED

v. 03290415

Est. 1988

+421 (51) 77 15 065

seak@seak.sk

seak.sk

OPTION DIM: With integrated

dimming interface

OPTION BU90: 90 minute

emergency module

CLARUS LED conveniently

retrofits existing fluorescent T8

or T5 TTX line systems with

long-lasting maintenance-free

LED light source.

CLARUS LED saves money by

reducing electricity demands by

up to 50% and by eliminating

maintenance.

CLARUS LED also saves money

on installation labour since no

tools are required. Swapping

fluorescent to LED takes less

than ten minutes of single

installer without compromising

the safety, reliability or integrity

of the entire system. Future

upgrades to more efficient light

sources also require only a

nominal labour costs.

AVAILABLE CROSS SECTIONS

LP-1 LP-2 LP-3 LP-4 LP-5 LP-6 LP-1a

for TTX 150

for TTX 400

Tesco Ref.: Main Floor

TTX 400 TTX 150

* Efficiacy tested with transparent optical system Tridonic Linear Cover SY Transparent

**Efficiacy tested with Philips Performer

** ** ** **

Strnka 1