View
5
Download
0
Category
Preview:
Citation preview
Specification
Product MT-4600 by flow sensor (Low current system)
Injection time 0 – 1600㎲
InjectorBosch, Delphi, Denso, Siemens piezo, Bosch piezo,
Denso piezo
Output 4 CH
Cooling Forced cooling
Pressure 0-2000bar (Replaceable up to 2200 bar)
Power 220V 50/60Hz (Optional: 380V 50/60Hz)
Motor 3phase 2HP 6poles
Oil tank 30L
Size 1320x600x1590 (mm)
* Product specifications are subject to change without notice to improve system performance.
MT-4600 Specification
• Wide range of injector DB
• Automatic measurement by flow sensor
• Real time voltage waveform for piezo
• Real time current waveform for solenoid
• Automatic seating for a piezo injector
• Auto recognition of bad piezo injector
• Resistance measurement of a solenoid
injector
• Auto recognition of a bad solenoid injector
• Automatic online upgrade
• Pump test
• IMV test
Advantages
MT-4600
System Injector DB provided by vehicle type
Automatic online upgrade of Injector DB
Quiet operation by applying low power motor control technology
Printing for test result
Display rail temperature
Convenient automatic cylinder
Adjustable operation condition by settings
LED light for convenient operation
Built-in fuel cooling system
Automatic seating for a piezo injector
Function to stabilize the injection by forming proper hydraulic pressure when disassembling and assembling piezo injectors.
After reassembly of the piezo injector, ‘Seating’ function
automatically stabilize the injection.
Automatic measurement and analysis by Flow sensor
Automatic analysis by flow sensor
Individual control system for Bosch, Delphi, Siemens,
Denso injector (3rd, 4th, 5th and 6th generation)
Accurate injection measurement to find knocking trouble
of Siemens, Delphi, Denso injector
Automatic diagnosis for injector failure
Automatic record of measured volume
MT-4600
Automatic recognition of injector
Indicates actuator failure of a piezo injector
and coil failure of a solenoid injector
Indicates short circuit of a piezo injector
and a solenoid injector
Check the connection of a piezo injector
Display real time resistance values and
check states of a solenoid injector
Real-time waveform display of injectors
Piezo injectors automatically display voltage waveforms
Solenoid injectors automatically display current waveforms
Various injector test
Manual operation
Built in standard value by injector type
Automatic upgrade of injector DB
Individual control system for Bosch, Delphi, Siemens, Denso injector (3rd, 4th, 5th and 6th generation)
Dedicated connectors for each injector provided
Various DB provided
Printing
Free adjustment of voltage & current
Display voltage & current of all injector
Real time voltage waveform display of piezo injector
Real time current waveform display of solenoid injector
Enable to enlarge or reduce the injector waveform
MT-4600
High pressure & IMV Test
Display IMV defect, pressure, duty graph
Display a graph of target pressure and current pressure.
Control type can be selected by pump type
Rotation direction can be selected by pump type
Pump pressure can be freely adjusted
Rail duty can be freely adjusted
Automatic IMV measurement
Flexible high pressure pump hose
Dedicated connectors for each pump provided
Convenient pump detachment
Coupling that doesn’t damage the pump
Pump IMV test (Pressure waveform display)
Normal IMV Bad IMV
MT-4600
Coil magnetic force test
Short circuit test
Function to check 4 injectors for short circuit or other circuit problem at the same time
Examine the cause of start failure and shut off
Normal injector Show defect status as %
Bosch piezo actuator test
Function to check whether there is a poor start or shut off while driving
Function to check whether the piezo injector has a proper hydraulic pressure and capability of piezo actuator.
** If the piezo actuator cannot move normally, it is marked in red
MT-4600 S : Special functions (Optional)
Function to check whether the remanufacturing is possible due to coil aging and to measure the magnetic force value.
Able to check 4 injector’s magnetic force at the same time.
Since the injectors after the 5th generation are very sensitive, coil magnetic force test is essential.
MT-4600
Knocking test
Test to identify shaking or knocking of the car while driving
Able to identify the cause of knocking when idling and accelerating
Guide to the accurate remanufacturing of injectors
Pattern test
Injection balance test by each injector per a cylinder to make a car quiet.
High pressure test
Test to identify the cause of shut off while high speed driving for Bosch and Denso piezo injectors
If 4 injectors’ graph come within ± 0.5cc each other, it’s good.
If 4 injectors’ graph are apart over 0.5cc each other, it’ bad. > Possibility to cause knocking
If 4 injectors’ graph come within ± 0.5cc each other, it’s good.
If 4 injectors’ graph are apart over 0.5cc each other, it’ bad.
Some piezo injector may not be injected at high pressure.
The graph is bent at high pressure when it’s bad.
MT-4600 S : Special functions (Optional)
Recommended