Specification

Product MT-4600 by flow sensor (Low current system)

Injection time 0 – 1600㎲

InjectorBosch, Delphi, Denso, Siemens piezo, Bosch piezo,

Denso piezo

Output 4 CH

Cooling Forced cooling

Pressure 0-2000bar (Replaceable up to 2200 bar)

Power 220V 50/60Hz (Optional: 380V 50/60Hz)

Motor 3phase 2HP 6poles

Oil tank 30L

Size 1320x600x1590 (mm)

* Product specifications are subject to change without notice to improve system performance.

MT-4600 Specification

• Wide range of injector DB

• Automatic measurement by flow sensor

• Real time voltage waveform for piezo

• Real time current waveform for solenoid

• Automatic seating for a piezo injector

• Auto recognition of bad piezo injector

• Resistance measurement of a solenoid

injector

• Auto recognition of a bad solenoid injector

• Automatic online upgrade

• Pump test

• IMV test

Advantages

MT-4600

System Injector DB provided by vehicle type

Automatic online upgrade of Injector DB

Quiet operation by applying low power motor control technology

Printing for test result

Display rail temperature

Convenient automatic cylinder

Adjustable operation condition by settings

LED light for convenient operation

Built-in fuel cooling system

Automatic seating for a piezo injector

Function to stabilize the injection by forming proper hydraulic pressure when disassembling and assembling piezo injectors.

After reassembly of the piezo injector, ‘Seating’ function

automatically stabilize the injection.

Automatic measurement and analysis by Flow sensor

Automatic analysis by flow sensor

Individual control system for Bosch, Delphi, Siemens,

Denso injector (3rd, 4th, 5th and 6th generation)

Accurate injection measurement to find knocking trouble

of Siemens, Delphi, Denso injector

Automatic diagnosis for injector failure

Automatic record of measured volume

MT-4600

Automatic recognition of injector

Indicates actuator failure of a piezo injector

and coil failure of a solenoid injector

Indicates short circuit of a piezo injector

and a solenoid injector

Check the connection of a piezo injector

Display real time resistance values and

check states of a solenoid injector

Real-time waveform display of injectors

Piezo injectors automatically display voltage waveforms

Solenoid injectors automatically display current waveforms

Various injector test

Manual operation

Built in standard value by injector type

Automatic upgrade of injector DB

Individual control system for Bosch, Delphi, Siemens, Denso injector (3rd, 4th, 5th and 6th generation)

Dedicated connectors for each injector provided

Various DB provided

Printing

Free adjustment of voltage & current

Display voltage & current of all injector

Real time voltage waveform display of piezo injector

Real time current waveform display of solenoid injector

Enable to enlarge or reduce the injector waveform

MT-4600

High pressure & IMV Test

Display IMV defect, pressure, duty graph

Display a graph of target pressure and current pressure.

Control type can be selected by pump type

Rotation direction can be selected by pump type

Pump pressure can be freely adjusted

Rail duty can be freely adjusted

Automatic IMV measurement

Flexible high pressure pump hose

Dedicated connectors for each pump provided

Convenient pump detachment

Coupling that doesn’t damage the pump

Pump IMV test (Pressure waveform display)

Normal IMV Bad IMV

MT-4600

Coil magnetic force test

Short circuit test

Function to check 4 injectors for short circuit or other circuit problem at the same time

Examine the cause of start failure and shut off

Normal injector Show defect status as %

Bosch piezo actuator test

Function to check whether there is a poor start or shut off while driving

Function to check whether the piezo injector has a proper hydraulic pressure and capability of piezo actuator.

** If the piezo actuator cannot move normally, it is marked in red

MT-4600 S : Special functions (Optional)

Function to check whether the remanufacturing is possible due to coil aging and to measure the magnetic force value.

Able to check 4 injector’s magnetic force at the same time.

Since the injectors after the 5th generation are very sensitive, coil magnetic force test is essential.

MT-4600

Knocking test

Test to identify shaking or knocking of the car while driving

Able to identify the cause of knocking when idling and accelerating

Guide to the accurate remanufacturing of injectors

Pattern test

Injection balance test by each injector per a cylinder to make a car quiet.

High pressure test

Test to identify the cause of shut off while high speed driving for Bosch and Denso piezo injectors

If 4 injectors’ graph come within ± 0.5cc each other, it’s good.

If 4 injectors’ graph are apart over 0.5cc each other, it’ bad. > Possibility to cause knocking

If 4 injectors’ graph come within ± 0.5cc each other, it’s good.

If 4 injectors’ graph are apart over 0.5cc each other, it’ bad.

Some piezo injector may not be injected at high pressure.

The graph is bent at high pressure when it’s bad.

MT-4600 S : Special functions (Optional)