View
217
Download
0
Category
Preview:
DESCRIPTION
P ROCEDURE We then put foam paper on the inside of the box, which did prove to help with the insulation We wrapped aluminum foil around the can, because from our research, we learned it was a good insulator We had to shave the sides down on the box for it to fit in the 10x10x10 cm wood container
Citation preview
MICDS CAN CHALLENGE 2011Madison Wrobley and Isabella Kendall
PROCEDURE We started with hot glue gunning three
pieces of Styrofoam together to form our box We then put masking tape around the
Styrofoam because we had hoped it would provide more insulation
We thought using duct tape would help keep the can insulated, so we put it over the masking tape
PROCEDURE We then put foam paper on the inside of the
box, which did prove to help with the insulation
We wrapped aluminum foil around the can, because from our research, we learned it was a good insulator
We had to shave the sides down on the box for it to fit in the 10x10x10 cm wood container
PROCEDURE
PROCEDURE
PROCEDURE
MATERIALS
PROCEDURE
PROCEDURE
PROCEDURE
PROCEDURE
MATERIALS
Recommended