View
0
Download
0
Category
Preview:
Citation preview
www.oxxius.comwww.oxxius.com
2019
Measurement& Spectroscopy
One platform for all colorsSLM CW Monolithic DPSS benefits- Up to 500 mW- Exceptional wavelength stability - 1pm- Lowest power consumption
Ì ≤ 12 W for LCX’s & LPX’s, any wavelength, less than 200 mW Ì ≤ 15 W for LCX-532 & LCX-1064, 500 mW Ì ≤ 15 W for LCX-561 300 mW
- Low profile laser head (32 mm)- Tailored beam diameter capability (0.6 up to 1.4 mm)
VBG stabilized Laser Diode modules benefits- Proprietary SLM locking routine - Enhanced beam quality versions
Common key features- Single Longitudinal mode- TEM00 Beam- Beam pointing ≤ 5 µm/°C- SM/PM/MM fiber coupling options- USB and RS232 computer interface- Graphic User Interface with remote diagnostics- Remote ControlBoxx with power display (Plug&Play versions - CDRH)- Controllers integrated into laser head - LBX and LCX - Industry standard footprint (100 x 40 mm²)
Raman Spectroscopy
Brillouin Scattering
Interferometry
Photoluminescence
Holography
Laser Doppler Velocimetry
Laser Ultrasonic
Dynamic Light Scattering
532 553 561 633 640 785 830 1064
All-in-One laser
Specifications
www.oxxius.com
Single Frequency Lasers
(dB
)In
tens
ity (d
B)
532 534530
-80
-60
-40
Wavelength (nm)
Time (hours)
Wav
elen
gth
(nm
)
561.5
561.48
5000 1500 2500
561.46
561.44
Time (hours)
Pow
er (m
W)
Bas
e te
mpe
ratu
re (°
C)
0 20 40 60
150
100
50 15
30
45
60200
Time (hours)
Pow
er (m
W)
Bas
e te
mpe
ratu
re (°
C)
0 20 40 60
150
100
50 15
30
45
60200
(1) ± 0.5 nm at 500 mW * Specifications at nominal power ** 50 - 100% for LCX-553S
LCX-532S LCX-553S LCX-561S LCX-1064S LBX-633S LSX-785S-ISO LBX-830S
Technology DPSS Stabilized laser diodeOptical characteristics
Emission wavelengths 532.3 nm ± 0.3 nm(1)
553.0 nm ± 0.4 nm
561.4 nm ± 0.4 nm (1)
1064.6 nm ± 0.5 nm
632.5 nm ± 0.5 nm
785 nm± 0.5 nm
830 nm
Wavelength Stability over 8 hours and ±3°K
≤ 1 pm ≤ 10 pm
Linewidth ≤ 1 MHz ≤ 100 MHz typ.
Coherence Length ≥ 100 m ≥ 1 m typ.
Nominal output power, continuous wave50 mW to 500 mW
50 mW to 200 mW
100 mW to 300 mW
100 mW to 500 mW 40 mW 150 mW
with isolator 100 mW
Control mode Automatic power control (APC) Automatic current control (ACC)
Power stability over 8 hours and ±3°K
± 1%
Option Power Adjustement 30 - 100%** or 0 - 100% with L1C-MPA Optional L1C-MPA
Optical noise % RMS, 10Hz - 20MHz bandwidth
≤ 0.2%
Transverse singlemode free-space beam (*)
Beam waist diameter (typ.) at 1/e², 50mm from output aperture
0.7 ± 0.1 mm 0.5 to 1.0 mm 0.5 ± 0.1 mm 0.5 to 1.0 mm
Beam divergence at 1/e², full angle, in far field
1.0 ± 0.2 mrad 2.0 ± 0.4 mrad 2 to 4 mrad ≤ 1.7 mrad 2 to 4 mrad
Beam quality factor (M²) ≤ 1.1 ≤ 1.9 ≤ 1.25 ≤ 1.9Beam circularity
in far field≥ 90% ≥ 65% ≥ 90% ≥ 65%
Beam pointing stability ≤ 5 µrad/°K
Polarization state linear, vertical
Polarization extinction ratio (typ.) 1000:1 100:1
PM fiber coupling option (*)
Nominal output power 35 mW to 350 mW
35 mW to 140 mW
35 mW to 210 mW
35 mW to350 mW 20 mW 105 mW 40 mW
Other available wavelengths: 405 nm, 946 nm
SpecificationsSM and PM Fiber MM Fiber (50 µm, 0.22 NA)
≥ 70 % (except LBX-S) Coupling Efficiency ≥ 80 %
100 :1 Polarization Ratio(PMF only)
n/a
FC-APCFC/PC, FCP8 on demand
Fiber Output Connector SMA
± 2 % Power Stabilityover 8 hours, ± 1.5 °C
± 2 %
2.0 m Fiber length 2.0 m
System Specifications
VersionLCX, LPX, LSX, LBX-S LCX and LPX LSX and LBX-S
Plug and play OEM OEM
CDRH compliance Yes No
Device qualification CE
Operating temperature 10 - 30 °C (ambient)
10 - 50 °C (baseplate)
20 - 35 °C (baseplate)
Power Consumption ≤ 25 W ≤ 20 W ≤ 10 W
Storage temperature 0 - 60 °C
Supply voltage 100 -240V ACexternal power supply 5 - 12V DC
Warm-up time ≤ 10 minutes (LCX, LPX) / ≤ 2 minutes (LSX, LBX)
Communication interfaces USB, RS-232, dedicated I/O interface
Laser head dimensions see drawings 100 x 40 x 32 mm3 (LCX)120 x 40 x 32 mm3 (LPX)
100 x 40 x 40 mm3 (LBX-S)120 x 40 x 40 mm3 (LSX)
Laser head weight ≤ 600 g including heatsink ≤ 250 g ≤ 330 g
Electronic integrated into laser head
Controller Plug&PlayController
with Power adjustement ControlBoxxoptional
Controllerfixed power RemoteBoxx
LCX & LPX - DPSS Monolithic Resonator
Technology
The unique feature of the LaserBoxx DPSS is a proprietary, Alignment-free Monolithic Resonator (AMR). The elements of resonator are assembled into a single ultra-low-loss optical subsystem, using a proprietary crystal bonding technique.
A highly transparent compound, deposited on chemically activated end-faces of two crystals, creates a bond that is extremely robust over time, temperature variations, and insensitive to mechanical vibrations. Dielectric mirrors coated at the end-faces of the crystals complete the monolithic assembly with no moving parts.
Benefits of the AMR
The OXXIUS AMR technology offer the highest spectral quality of the market and a high robustness over the time. The LCX & LPX lasers are insensitive to temperature variations and mechanical vibrations. High stability and reliability.
LBX & LSX PlateformTechnology
LBX & LSX lines are performing driver integrated platforms for stabilized laser diode.
Benefits
LBX-S and LSX-S deliver ultra narrow linewidth thanks to its excellent temperature stability and low noise current. The Oxxius proprietary embedded firmware locks the laser on same mode at each start up.
Single Longitudinal ModeLCX-532S spectrum
Power StabilityLCX-561S power vs temperature
Beam ProfileLCX-553S-200
Wavelength StabilityLCX-561S wavelength vs time
Beam ProfileLBX-633S
LiNb Raman Spectrumobtained with LSX-785S
Si Raman Spectrumobtained with LSX-785S
Single Longitudinal ModeLSX-785S spectrum
Fiber coupling optionsFiber coupling options offer rugged and compact solutions to couple LaserBoxx into polarization maintaining fiber, standard single mode fiber or multimode fiber.
Custom Capabilitieso Wavelength tunability up to 10 pmo Tighter wavelength selectiono Custom wavelengthso Opto-mechanical Subassemblies including: • Wavelengths combiner (L4Cc, L6Cc) • AO modulator (see L1C datasheet) • Specific beam diameter or beam shapingo Custom control interfaceo Extended operational temperature range
The L1C platform offers an efficient, compact and cost effective solution to add advanced features to the LCX, LPX, LSX or LBX-S lasers:
L1C-MPA – Motorized Power AttenuatorL1C-AOM – Acousto-Optic Modulator – DC 3MHzL1C-ISO - ≥ 25dB Isolation and transmission ≥ 85%.It comes in standard with the electromechanical shutter.
Advanced features with L1C platform
The ACX-SHTE is a compact and affordable electro-mechanical shutter. It is mounted directly on the LCX or LPX in place of the standard manual shutter.
The fiber coupling and other options are fully compatible with the electro mechnical shutter.
The ACX-SHTE is actuated via the LCX or LPX embedded software or via a standard TTL signal.
Electro-Mechanical shutter option
SM, PM & MM Fiber coupling
Mechanical Drawings76
.00
160.00
40.00
160.00
40.00
44.
00
4.00
40.00
44.
00
150.
00
25.004x 6.50
160.
00
FT D
issi
pate
ur F
F LM
X32
P&
P 07
0113
63.0
0
40.00
30.
00
108.50 140.50
83.50
108.50
30.
00
1.8
0
140.50
Intelock
Laser Emision Led
Alarm Led
Status Led
On / Off Key
On / Off Power
I/O PortLaser Head
Power Supply6-12VDC / 30W max
124.10
83.
50
6.5
0
115
.50
OD
0082
E100
-2 B
oitie
r ACX-R
MTB
DEM
751
2601
16
VISIBLE AND INVISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAMCLASS 3B LASER PRODUCT
Power up to 500 mW
VISIBLE AND INVISIBLE LASER RADIATION
AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION
CLASS 4 LASER PRODUCT
19.0
0
15.50
18.
00
21.00 4x M2.5 x 0.45
5.50 max
4.50
Front view
Rear view
All dimensions in mm
Controller-connector
90.0
0
82.
00
3.00 H7Dowel Hole
20.00
5.0
0
5.00
30.00
Top
view
3.00 H7 x 7.00Dowel Slot
100.00 40.00
5.0
0 1.5
0 32.
00
Laser head
Lase
r Hea
d LM
X 3
2-02
OE
M 1
0121
2
32.0
0
19.0
0
15.50
18.
00
21.00 4x M2.5 x 0.45
5.50 max
4.50
Front view
Rear view
All dimensions in mm
Controller-connector
90.0
0
82.
00
3.00 H7Dowel Hole
20.00
5.0
0
5.00
30.00
Top
view
3.00 H7 x 7.00Dowel Slot
100.00 40.00
5.0
0 1.5
0 32.
00
Laser head
Lase
r Hea
d LM
X 3
2-02
OE
M 1
0121
2
100.0040.00
4.50
2.00
40.0
0
OD
0055
E10
0-4
Sou
rce
Lase
rbox
x E
OM
121
212
40.0
0
19.
00
15.50
Rear view
Bot
tom
vie
w
USB
Controller-connector
DigitalModulation
30.00 5.00
20.00
90.0
05.
00
3.00 H7 x 7.00dowel slot
3.00 H7dowel hole
4x 4.20
All dimensions in mm
Laser head
Front view
100.0040.00
4.50
2.00
40.0
0
OD
0055
E10
0-4
Sou
rce
Lase
rbox
x E
OM
121
212
40.0
0
19.
00
15.50
Rear view
Bot
tom
vie
w
USB
Controller-connector
DigitalModulation
30.00 5.00
20.00
90.0
05.
00
3.00 H7 x 7.00dowel slot
3.00 H7dowel hole
4x 4.20
All dimensions in mm
Laser head
Front view
100.0040.00
2.00
40.0
0
OD
0055
E10
0-4
Sou
rce
Lase
rbox
x E
OM
121
212
40.0
0
19.
00
15.50
Rear view
Bot
tom
vie
w
USB
Controller-connector
DigitalModulation
30.00 5.00
20.00
90.0
05.
00
3.00 H7 x 7.00dowel slot
3.00 H7dowel hole
4x
4.20
All dimensions in mm
Laser head
Front view
120.00
40.00
40.
00
120.00
40.00
12.00 40.
00
Laser head
Electro Mechanic Shutter
19.50 H7
32.
00
19.
00
15.50
73.
00
50.
00
4.0
0 160
.00
25.00
40.00
50.00
150
.00
4x 6.50
Controller-connector
Usb
OD
0067
E110
5-2
Sou
rce
LCX 6
40-1
20 D
EM10
26 1
4011
9
Bot
tom
vie
w
Rear view
Front view
All dimensions in mm
160.00
50.00
86.0
0
120.00
40.00
1.5
0
32.
00
Laser head
40.00
19.
00
15.50
32.
00
4.50
5.0
0
120
.00
110
.00
30.00 3.00 H7 x 6.50
Dowel Slot
5.00
20.00
3.00 H7Dowel Hole
Controller-connector
Usb
OD
0067
E110
5-2
Sou
rce
LCX 6
40-1
20 D
EM10
26 1
4011
9
Bot
tom
vie
w
Rear view
Front view
All dimensions in mm
120.00
40.00
1.5
0
32.
00
Laser head
40.00
19.
00
15.50
32.
00
4.50
5.0
0
120
.00
110
.00
30.00 3.00 H7 x 6.50
Dowel Slot
5.00
20.00
3.00 H7Dowel Hole
Controller-connector
Usb
OD
0067
E110
5-2
Sou
rce
LCX 6
40-1
20 D
EM10
26 1
4011
9
Bot
tom
vie
w
Rear view
Front view
All dimensions in mm
Contact us:Oxxius S.A.4 rue Louis de BroglieF-22300 Lannion, France
Phone: +33 296 48 70 28Fax: +33 296 48 21 90sales@oxxius.comwww.oxxius.com
LCX series, Plug & PlayDPSS Laser
LSX series, Plug & Play Stabilized laser diode Integrated isolator
LPX series, Plug & PlayDPSS Laser
LBX series, Plug & PlayStabilised laser diode
LBX-633S / LBX-830S
PPF - RemoteBoxx Optional heatsink for LCX and LBX seriesPPA - ControlBoxx
For fixed power versionsFor power adjustable versionsOptional air-forced heat sink for maximum ambient temperature of 38°C.
Including power supply.
Oxxius has a policy of continuous product improvement. Specifications may change without notice.
06/1
9
LCX series, OEMDPSS Laser
LPX series, OEMDPSS Laser
LBX series, OEMStabilized laser diode
LSX series, OEMStabilized laser diodeIntegrated isolator
All-In-One laser head with built-in controllers. Input voltage range: 5-12 V DC
Recommended