View
215
Download
1
Category
Preview:
Citation preview
757 758 Press 2012 diemold@misumiusa.com It’s all about TIMEFor technical support
MG
① ~ SUM24L ③ ~ Brass (C3604BD)
② ~ Alnico magnet Heat resistance 80℃
MGN (Strong, corrosion-resistant type)
① ~ SUM24L Electroless nickel plating ② ~ Neodymium magent Heat resistance 80℃
HX HXH
(For high-temperature use)
HXU
① ~ SUM24L ③ ~ Brass (C3604BD) ② ~ Cobalt magnet Heat resistance 80℃
HXMB
~ Cobalt magnet Heat resistance 200℃
L M×P *Adhesive force N{kgf}
Surface magnetic flux density Gauss [G] d1 d2 B H Catalog No. Base unit price
Type D 1 ~ 19 pieces
8 3×0.5 3.9 {0.4}2100 ~ 2600 4 5 2 1.6
HXU
65.9 {0.6}2400 ~ 2600 5 6 8
4×0.7 14.7 {1.5}2700 ~ 2900 7 8 3 2.1 10
10 34.3 {3.5}2800 ~ 3100 9.5 11 4 3.1 13
5×0.8 58.8 {6.0}2900 ~ 3300 12.5 14 1613 98.1{10.0}2900 ~ 3400 16.5 18 6 5.1 2015 6×1.0 137.3{14.0} 21.5 23 25
Load{kgf}=Load N×0.101972 *Adhesive force: Refer to page at right (figure at bottom).
Because magnets are easily broken, do not use any alterations for them.
The magnet and holder are fastened by an adhesive.
The magnetic surface is recessed by 0.1 ~ 0.3 from the case.
MAGNETS
HX HXH
~① SUM24L② Cobalt magnet
- Raydent treatment Heat resistance 80℃ 200℃
L M×P *Adhesive force N{kgf}
Surface magnetic flux density Gauss [G] d1 d2 B C H t Catalog No. Base unit price
Type D 1 ~ 19 pieces15 5×0.8 5.9{0.6}1100 ~ 1300 6 8 7 0.5 5 2.5
MG
1015 5×0.8 11.8{1.2} 8 10.5 1.0 1320 6×1.0 15.7{1.6}1200 ~ 1400 10 13 10 6 3.5 1625 8×1.25 29.4{3.0}1200 ~ 1500 13 16 12
1.5 9 6.520
30 8×1.25 44.1{4.5}1300 ~ 1700 15.5 18 13 2530 8×1.25 78.5{8.0}1400 ~ 1700 20 23.5 15 28
Load{kgf}=Load N×0.101972 *Adhesive force: Refer to page at right (figure at bottom).
Because magnets are easily broken, do not use any alterations for them.
The end face is finished by grinding.
L M×P *Adhesive force N{kgf}
Surface magnetic flux density Gauss [G] d1 B C ℓ Catalog No. Base unit price
Type D 1 ~ 19 pieces
10 3×0.5 2.9 {0.3}3000 ~ 3200 4.02.0 0.3 6
MGN
65.8 {0.6}3500 ~ 3700 5.0 8
15 5×0.8 9.8 {1.0}3400 ~ 3600 6.0 0.5 10 1015.6 {1.6}3200 ~ 3400 7.0 1.5 13
20 6×1.0 36.2 {3.7}3500 ~ 3700 9.5 2.0 1.0 12 1625
8×1.2558.8 {6.0}3100 ~ 3300 12.5 16 20
30 112.7{11.5}3500 ~ 3700 16.5 3.0 1.5 18 25196.1{20.0}3300 ~ 3500 18.5 28
Load{kgf}=Load N×0.101972 *Adhesive force: Refer to page at right (figure at bottom).
Because magnets are easily broken, do not use any alterations for them.
The magnetic surface is recessed by 0.1 ~ 0.3 from the case.
L M×P *Adhesive force N{kgf}
Surface magnetic flux density Gauss [G] d1 d2 B H Catalog No. Base unit price 1 ~ 19 pieces
Type D HX HXH
6 3×0.5 2.9{0.3}2100 ~ 2600 4 5 2.0 1.5 HX Heat resistance:
80℃
HXH Heat resistance:
200℃
63.9{0.4}2200 ~ 2600 5.5 6.5 8
4×0.7 9.8{1.0}2100 ~ 2300 7 8 1.5 1.1 10
8 29.4{3.0}2200 ~ 2400 9.5 11 2.0 1.6 13
5×0.8 49.0{5.0}2200 ~ 2500 12.5 14 1610 88.3{9.0}2300 ~ 2600 16.5 18 3.0 2.6 2013 6×1.0 127.5{13.0} 21.5 23 25
Load{kgf}=Load N×0.101972 *Adhesive force: Refer to the page at right (figure at bottom).
Because magnets are easily broken, do not use any alterations for them.
The magnet and holder are fastened by an adhesive.
The magnetic surface is recessed by 0.1 ~ 0.3 from the case.
T *Adhesive force N{kgf}
Surface magnetic flux density Gauss [G]
Catalog No. Base unit priceType D 1 ~ 19 pieces
21.0{0.10}
2000 ~ 2100 HXMB
(Heat resistance) 200℃
31.5{0.15} 43.9{0.40} 5
1.5 6.9{0.70} 2200 ~ 2400 7Load{kgf}=Load N×0.101972 *Adhesive force: Refer to the page at right (figure at bottom). Magnets are extremely brittle and easily broken. Because the magnets are easily damaged, fasten
Always use sufficient care when handling them. them so that they do not protrude from the holder. Use adhesive to fasten the magnet in place.
OrderCatalog No.
MG 13HX 20
Days to Ship
Price
MLG (Long type)
① ~ SUM24L ③ ~ Brass (C3604BD)
② ~ Alnico magnet Temperature resistance 80℃
MGATA (Press-fit type)
① ~ SUM24L ③ ~ Brass (C3604BD)
② ~ Alnico magnet Temperature resistance 80℃
MGATB (Press-fit type)
① ~ SUM24L ④ ~ SUM24L
② ~ Alnico magnet Heat resistance 80℃
③ ~ Brass (C3604BD)
L M×P *Adhesive force N{kgf}
Surface magnetic flux density Gauss [G] d1 d2 B H t
Catalog No. Base unit price
Type D 1 ~ 9 pieces
25 6×1.0 15.7{1.6} 1100 ~ 1300 10 13 10 6 3.5
MLG16
30 8×1.25 29.4{3.0} 1100 ~ 1400 13 16 129 6.5
20
35 8×1.25 78.5{8.0} 1200 ~ 1500 20 23.5 15 28Load {kgf}=Load N×0.101972 *Adhesive force: Refer to the figure below.
Because magnets are easily broken, do not use any alterations for them.
The end face is finished by grinding.
Dp6 L *Adhesive force N{kgf}
Surface magnetic flux density Gauss [G] d1 d2 d3 B H t
Catalog No. Base unit price
Type D 1 ~ 9 pieces
20 +0.035 +0.022 16 25.5 {2.6}1400 ~ 1700 13 16
212 8 4.0
MGATA
20
25 +0.035 +0.022 19 47.1 {4.8}
1600 ~ 190015.5 18.5 13
10 5.025
30 +0.035 +0.022 20 68.6 {7.0} 19.5 23
3
15 30
35 +0.042 +0.026 26 98.1{10.0}
1900 ~ 210024.5 28 18
13 6.535
40 +0.042 +0.026 27 142.2{14.5} 29.5 33 20 40
Load {kgf}=Load N × 0.101972 *Adhesive force: Refer to the figure below.
Because magnets are easily broken, do not use any alterations for them.
The end face is finished by grinding.
Dp6 L *Adhesive force N{kgf}
Surface magnetic flux density Gauss [G] d1 d2 d3 B H t W
Catalog No. Base unit price
Type D 1 ~ 9 pieces
20 +0.035 +0.022 18 26.5 {2.7}900 ~1200 13 16
212 8 2.5 5
MGATB
20
25 +0.035 +0.022 20 49.0 {5.0}
1100 ~140015.5 18.5 13
103.0 6 25
30 +0.035 +0.022 26 73.5 {7.5} 20 23
3
15 3.5 7 30
35 +0.042 +0.026 28 103.0{10.5}1300 ~1600 25 28 18
13 4.0 835
40 +0.042 +0.026 30 147.1{15.0}1400 ~1600 30 33 20 40
Load {kgf}=Load N×0.101972 *Adhesive force: Refer to the figure below.
Because magnets are easily broken, do not use any alterations for them.
The end face is finished by grinding.
* “Adhesive force” indicates the ability to lift up SS400 material (plate thickness 10 mm, top surface polished).
Example■ Installation
After press-fitting, install as shown in the figure in order to prevent the magnet from falling off.
OrderCatalog No.MGATA 20MGATB 20
Days to Ship
Price
DD+1
φ20
T
T-1
HXMB
Adhesive
Hole machining(reference)DH7
20 25 30
+0.0210
35 40
+0.0250
MLG, MGATA, and MGATB will be discontinued beginning from the next catalog.
C0.22
t
C M×P
HB
L-0.1 0
d1
③②①
2d 0-0.1D
C0.3①②
D-0.1 0d1
M×PC
B 0-0.1L
C0.2①②
d1
D-0.1 0
2d
C0.5
M×P
B
L-0.1 0
H
C0.2①②③
d1
D-0.1 0d2
HC0.5
M×P
0-0.1L
B
T±0.1 D ±0.1
ℓ
S pole N pole
Hollow
N poleS pole
Hollow
N poleS pole
N poleS pole
HX・HXHHXU・MLGMGATA・MGATB
MG・MGN
G
10
SS400
HXMB
N{kgf}Adhesive force
C0.52
①②③
d1
D-0.10
d2
C1 M×P
t
HB
L-0.1 0
C0.5d3①②③
d1
d2
t
HB
0-0.1L
C2
Dp6
d3 ①
③
d1
Dp6
d2
tC2
WBH
0-0.1L
②④
N pole
N pole
S pole
S pole
N poleS pole
Loctite application
Set screw(Hexagon socket head cone point set screw or similar)
P18-22.indd 757-758 2012/10/22 13:35:39
Recommended