View
239
Download
6
Category
Preview:
Citation preview
HOOD L INERS
EXHAUST FANS
S I L E N C E R S
KITCHEN VENTILATION SOLUTIONS
w w w . f a n t e c h . n e t
J u n e 2 0 0 7 – S B K 0 6 0 7
I M P R O V I N G I N D O O R A I R Q U A L I T Y T H R O U G H B E T T E R V E N T I L AT I O N
36" (3')36" (3')36" (3')
30"30"30"
HOW TO SIZE YOURKITCHEN VENTILATION SYSTEM
Before choosing your kitchen ventilation fan checkwith your local residential codes and the range manufacturer’s recommendations. If rangemanufacturer’s recommendationsare not available, use the informationat right to calculate the fan size.
These recommendations followthe guidelines of the HomeVentilating Institute (HVI).
KITCHEN VENTILATION SOLUTIONS
Wall Mount Installations:100 CFM per foot of width.
Example: 36" (3 ft.) widehood will require 300 CFM.
Feet of Width 3CFM per Foot x 100
Air Flow [CFM] 300
Island Mount Installations:150 CFM per foot of width.
Example: 36" (3 ft.) widehood will require 450 CFM.
Feet of Width 3CFM per Foot x 150
Air Flow [CFM] 450
36" (3')
Note: When using a gas cooktopor range, it is recommended thatthe hood liner be 6" wider thanthe cooktop.
Today’s kitchens have become much more than a place for cookingand food preparation. The kitchen is the heart of the home. It’s the center of activity for the entire family as well as the ideal place to congregate for informal entertaining.
Let Fantech show you how to keep the kitchen clear of smoke, grease, steam and odors with a ventilation system that works quietlyand effectively.
The Fantech 3-part exhaust system includes a powerful exhaust fan thatmounts away from the living area; an inline silencer to minimize noise;and a hood liner that fits beautifully in your custom hood design.
INLINE EXHAUST FANS
FG SERIES Exhaust Fans FKD SERIES Exhaust Fans
†
FG 6FG 6XL
FG 8FG 8XL
FG 10FG 10XL
FG 12FG 12XL
72153119142138196181301
0.681.481.141.451.431.961.873.01
303483461502513589741940
270450410470480560680880
232409351428444531601819
196369295388407503515746
164329243351366472434670
134289191313324441363596
97243143266269400290505
5820197218216355236425
Model D
668810101212
665/6
66
411/16
57/8
81/4
81/4
113/8
131/8
133/8
133/8
133/8
133/8
1616
FanModel
MaxWatts
MaxAmps
Static Pressure in Inches W.G.0" .2" .4" .6" .8" 1.0" 1.25" 1.5"
FG Series Performance
A C
11
11/8
11/8
11/8
11/8
11/16
11/16
E
11
11/8
11/8
11
13/16
13/16
F
FG 6FG 6XL
FG 8FG 8XL
FG 10FG 10XL
FG 12FG 12XL
FG Series Dimensions
A
F
E
D
Side View
Top View
2"
33/4"
C
Dimensional information in inches.† Duct connections are 1/8” smaller than duct size.
Performance shown is for installation type D - Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Performance ratings do not include the effects of appurtenances in the airstream.
121/2
121/2
14177/8
83691012662016
FanModel
MaxWatts
MaxAmps 0" .25" .5" .75" 1.0" 1.25" 1.5"
FKD 8XL
FKD 10FKD 10XL
FKD 12XL
327329529500
2.991
3.011
4.842
4.802
Static Pressure in Inches W.G.
FKD Series Performance (For sound performance data refer to publication #FKD-1203)
Dimensional information in inches.† Duct connections are 1/8” smaller than duct size.
A2
FKD 8XL
FKD 10FKD 10XL
FKD 12XL
8101012
–––14
–––12
Model A1 C
151/2
121/2
15187/8
D
778
7/8
E
–––
15/8
F
FKD Series Dimensions
Performance shown is for installation type D - Ducted inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Performance ratings do not include the effects of appurtenances in the airstream.1 Recommended speed control rating 5A. 2 Recommended speed control rating 10A.
3/4"
ED
A C A2 A1
E
D
EF
A C
761836
11871832
68075211001649
59565310061423
499547911
1066
393432810606
286342696–
FKD 8XL, FKD 10 & FKD 10XL FKD 12XL
†A
Inline duct fans designed with airtight galvanized steel housings. Ideal foruse with smaller, standard size ranges. Available in sizes from 303 CFM to 940CFM. Duct sizes from 6" to 12".
Powerful, smooth running mixed flow centrifugal fans designed for kitchen ventilation systems. Galvanized steel housings with baked powder coat finish. The perfect size for use with commercial style ranges. 836 CFM to2016 CFM. Duct sizes from 8" to 12".
Fantech, Inc. certifies that theFKD Series shown herein islicensed to bear the AMCA Seal.The ratings shown are based ontests and procedures performedin accordance with AMCAPublication 211 and AMCAPublication 311 and comply withthe requirements of the AMCACertified Ratings Program.
Fantech, Inc. certifies that the mod-els shown herein are licensed tobear the AMCA Seal. The ratingsare based on tests and proceduresperformed in accordance with AMCAPublication 211 and comply with therequirements of the AMCA CertifiedRatings Program. Performance certifiedis for installation type D - Ducted inlet,Ducted outlet. Performance ratings donot include the effects of appurte-nances (accessories).
SHL/SGHLRange HoodLiner
RC Roof CapRC Roof Cap
LD Silencer
RSKBackdraftDamper
RSKBackdraftDamper SHL/SGHL
Range Hood Liner
FKDInline Fan
FGInline Fan
FC Clamps
LD Silencer
FC Clamps
FC Round Duct ClampsGalvanized steel stabilizing mounting clamps lined with neoprene formounting and duct connection of fans. Sizes 6,8,10,12". Sold in pairs.
C
B
FanModel
MaxWatts
MaxAmps 0" .1" .2" .4" .6" .8" 1.0" 1.5"
RVF 6RVF 6XL
RVF 8XL
92149151
0.841.461.42
242381435
220360410
204346392
177315348
150285312
123258282
68213235
–64102
Static Pressure in Inches W.G.
RVF Series Performance
RVF Series performance is shown with ducted inlet. Per HVI’s Certified Ratings Program, charted air flow performance has been derated by a factor based on actual test results and the certified rate at .1 inches WG.
†Model C
RVF 6RVF 6XL
RVF 8XL
668
131717
101/4
141/4
141/4
A B
666
D
23/4
23/4
23/4
E
Dimensional information in inches.† Duct connections are 1/8” smaller than duct size.
RVF Series Dimensions
D
A
11/2"
E
0" .25" .5" .75" 1.0" 1.25" 1.5"Fan
ModelMax
WattsMaxAmps
RE 6/REC 6RE 8XL/REC 8XL
RE 10XL/REC 10XL
RE 10XLT/REC 10XLT
87153394531
0.801.483.615.12
51130548609
80170586695
106212622766
134259656831
169307690890
199356721949
2274097531008
Static Pressure in Inches W.G.
RE/REC Series Performance (For sound performance data refer to publication #RE/C-0899-6)
Performance shown is for installation type A - Free inlet, Free outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Performance ratings do not include the effects of appurtenances in the airstream.
†Model C
RE 6REC 6RE 8XL
REC 8XL
RE 10XL
REC 10XL
RE 10XLT
REC 10XLT
668810101010
133/16
133/16
153/4
153/4
193/4
193/4
193/4
193/4
E
–11/2
–11/2
–11/2
–11/2
151/2
151/2
202020202020
A B
61/2
61/2
66
113/4
113/4
1211/16
1211/16
D
Dimensional information in inches.† Duct connections are 1/8” smaller than duct size.
RE/REC Series Dimensions
D
C
AB
D
E
C
AB
REC SeriesRE Series
EXTERIOR EXHAUST FANS
Exterior mounted exhaust fans can provide the perfect solutionwhen space is at a minimum. Ideal for homes, condominiums andapartment complexes. Fans mount on an exterior wall. Sizes from242 CFM to 435 CFM. Duct sizes from 6" to 8".
RVF SERIES Exhaust Fans RE/REC SERIES Exhaust Fans Exterior mounted exhaust fans can provide the perfect solutionwhen space is at a minimum. Ideal for homes, condominiums andapartment complexes. RE models can be mounted on a sidewallor a slanted roof. REC models mount on a curb. Models from 227CFM to 1008 CFM. Duct sizes from 6" to 10".
Fantech, Inc. certifies thatthe RE/REC Series shownherein is licensed to bearthe AMCA Seal. The ratingsshown are based on testsand procedures performedin accordance with AMCAPublication 211 and AMCAPublication 311 and complywith the requirements ofthe AMCA Certified RatingsProgram.
SHL/SGHLRange Hood Liner
RE Series Fan ShingleRoof
SHL/SGHLRange Hood Liner
Fan Baseplate
Ceiling
RVF Series Fan
RSKBackdraftDamper
SHL/SGHLRange HoodLiner
RC Roof CapHot steam and odorexhausted through roof vent
RigidDuct
LD Silencer
RSKBackdraftDamper
SHL/SGHLRange Hood Liner
FX/FKDInline Fan
RC RoofCap
SHL SERIES Hood Liners SGHL SERIES Hood LinersSHL Series range hood liners are made from commercial grade 304,22-gauge stainless steel. They feature built-in infinite speed controlfor the fan, washable aluminum filters and dimmable halogen lights(bulbs included). Available in 36", 42" and 48" widths. UL approved.
FG 6**FG 6XL
FG 8FG 8XL
FG 10FG 10XL
FG 12XL
FKD 8XL
FKD 10FKD 10XL*FKD 12XL*RE 6**RE 8XL
RE 10XL
RE 10XLT
RVF 6**RVF 6XL
RVF 8XL
Fan Model
interior inlineinterior inlineinterior inlineinterior inlineinterior inlineinterior inlineinterior inlineinterior inlineinterior inlineinterior inlineinterior inline
exterior roof/wallexterior roof/wallexterior roof/wallexterior roof/wall
exterior wallexterior wallexterior wall
Mounting
303483461502513589940836910126620162274097531008242381435
6.310.77.19.710.611.621.014.115.321
18.77.58.916.4217
11.59.7
1.83.62.33.33.63.96.84.34.35.87
1.42.54.25.71.83.63.3
Airflow/0"s.p.
230**340**300350370420670––––190**300550–180**280**310
250**370360420440500800580650830–200**340650720190**300360
260** 380 310 440460 5308706307309601130200** 350690840200** 310 370
Airflow/6" Duct† Airflow/8" Duct† Airflow/10" Duct† Sones†† Sones w/Silencer***
Recommended Fans for SHL and SGHL Series
* Requires larger speed control. Contact Fantech Customer Service for recommendations.** Fans will meet most local code requirements but will produce less than Fantech's recommended ventilation rate of 100 cfm per foot of hood width.*** Sones are not AMCA certified.† Typical airflow is an estimate based on a system with 20' of duct, two 90˚ elbows, a backdraft damper, roof cap and filters.†† Sone values are calculated at 0.5" (static pressure in inches W.G.)
SGHL 30 SGHL 36, SHL 36 SHL 42, SHL 48
SHL Series Dimensional InformationModel
SHL 36SHL 42SHL 48
UPC#
470364704247048
ø Duct†
81010
A
341/2
401/2
461/2
B
222222
C
666
E
333
Dimensional information in inches.† Duct connections are 1/8” smaller than duct size.
SGHL Series Dimensional InformationModel
SGHL 30SGHL 36
UPC#
4753047536
ø Duct†
68
A
281/2
341/2
B
1818
C
44
E
33
Dimensional information in inches.† Duct connections are 1/8” smaller than duct size.
HOOD LINERS
A C
B
E
1"
ø Duct
A C
B
E
1"
ø Duct
FC Clamps
LD Silencer
FXInline Fan
SGHL range hood liners are made with commercial grade 304, 22-gaugestainless steel fascia and galvanized steel body. Features include infinitespeed control for the fan, washable aluminum filters and dimmable halogen lights (bulbs included). Available in 30" and 36" widths. UL approved.
Distributed locally by:
Canada50 Kanalflakt Way, Bouctouche, NB E4S 3M5Phone: 800-565-3548; 506-743-9500Fax: 877-747-8116; 506-743-9600www.fantech.ca; info@fantech.ca
United States 1712 Northgate Blvd., Sarasota, FL 34234Phone: 800-747-1762; 941-309-6000 Fax: 800-487-9915; 941-309-6099www.fantech.net; info@fantech.net
LD SERIES SilencersGalvanized steel silencer for use in kitchen range hood ventilation and other applications were noise is a concern. A Fantech silencer can typicallyreduce the “perceived” sound level of the kitchen ventilation system bymore than 50%. Units feature rubber seal on inlet and outlet.
Fantech, reserves the right to modify, at any time and without notice, any or all of its products’ features, designs, components and specifications to maintain their technological leadership position.
Item#411742 SBK0607 ©2007 Fantech, Inc. All Rights Reserved.
RSK SERIES Backdraft DampersBackdraft dampers with galvanized steel collar and lightweight aluminumdamper blades. Spring loaded for positive closure.
RC SERIES Roof CapsGalvanized steel roof caps with damper flap closure and bird screen. Ductsizes from 6" to 12". Also available in copper and stainless steel.
Model A† B
Dimensional information in inches.† Duct connections are 1/8” smaller than duct size.
RSK 6RSK 8RSK 10RSK 12
681012
31/8
31/8
33
RSK Series Dimensions
B
A
Air Flow
Model Length
ModelSound Data (Suppresion dB Frequency Bands Hz)
8000LD 6LD 8LD 10LD 12
19181918
400030252520
200033293932
100023222723
50018172118
250109119
1255465
LD Series Sound Performance
ø Duct† Outside ø
Dimensional information in inches.† Duct connections are 1/8” smaller than duct size.
LD 6LD 8LD 10LD 12
681012
235/8
235/8
351/2
351/2
101/4
121/2
14173/4
LD Series Dimensions
SILENCERS & ACCESSORIES
LD Silencer
RSKBackdraftDamper
RSK Series
RC Series
Rigid Duct
Recommended