View
35
Download
0
Category
Tags:
Preview:
DESCRIPTION
Introduction of new products and innovations in the Licon range for 2012. New products 2012 / natural convection. Floor convectors. Heating benches. \\\\\. Heating registers. Facade convectors. Wall-mounted elements. News in the floor convector range. Extension of production ranges. - PowerPoint PPT Presentation
Citation preview
Introduction of new products and innovations in the Licon range for
2012
\\\\\
New products 2012 / natural convection
Floor convectors
Wall-mounted elements
Heating benches
Heating registersFacade convectors
News in the floor convector range
Extension of production ranges
Use of new premium materials
Swimming pool version
Economical Basic version of heating elements black varnished steel tub –
register without surface finish
Exclusive Higher emphasis on appearance black varnished steel tub black varnished register
Inox Stainless-steel tub design and non-varnished heating register
CAUTION, for dry environment only
New division of floor convectors
PKOC
PKIOC
Depth of PK floor convectors 9 cm
Depth of PK floor convectors 11 cm
Width 16 cm
Width 42 cm with a J4 exchanger
Width 28 cm Width 34 cm
Width 16 cm Width 20 cm Width 28 cm Width 34 cm
Width 20 cm
Width 42 cm with a J4 exchanger
New J4 heat exchanger Increased heat outputs
New type range, in all available lengths
New type range, in all available lengths
INNOVATION
INNOVATION
Depth of PK floor convectors 15 cm
Depth of PK floor convectors 19cm
Width 42 cm with a D4 exchanger
Width 28 cm Width 34 cm
Width 28 cm Width 34 cm
Width 42 cm with a D4 exchanger
New D4 heat exchanger, increased heat outputs
New type range, in all available lengths
New D4 heat exchanger, increased heat outputs
New type range, in all available lengths
INNOVATION
INNOVATION
Swimming pool design / Inpool
Use of premium materials, AISI 316 chemical stainless steel Guarantee – operation conditions Must be met
Water drain
Identified with letter B (PKB)
Suitable for premises with Increased humidity – POOLS
Recommended PM (new AL profile or Exclusive stainless steel)
Swimming pool design / InPool
News of heating benches
Production range extended with new types
Use of new premium materials
Swimming pool design
Heating benches with an outlet grille OLE- Economical
OL- Exclusive
The grille with a cut-out in the sheet-metal panelling has the same colour design as the bench
The OL heating bench is fitted with a covering silver aluminium grille
Economical
Exclusive
Higher emphasis on appearance
INNOVATION
Pool design of heating benches / Inpool
Material - AISI 316 chemical stainless steel coated with white
powder paint
Guarantee – operation conditionsmust be met
Identified with letter B (OLB, OLB/D)
Suitable for premises with Increased humidity
Swimming pool design / InPool The swimming pool design is available
for all the OL and OL/D types
INNOVATION
Facade convectors - FKIdeal solution for large glazed walls
Installation on a horizontal beam between vertical supports
Installation on a vertical support
Design freedom for architects
An alternative for wet environment is also available
Innovation of the OR heating exchanger Change of the position of the bleeding
valve for easier bleeding
INNOVATION
Suspended elements /OK Significant design change
New design of the front cover while maintaining the scope of production ranges.
Lengths from 40 to 200 cm
Heights 45 and 60 cm
Depths 9 and 15 cm
INNOVATION
Pool design of OK elements / InPool
Swimming pool design / InPool
Guarantee – operation conditions must be met
Identified with letter B (OKB)
Suitable for premises with Increased humidity
Material - AISI 316 chemical stainless steel coated with white
powder paint
New products 2012/ forced convection
Wall-mounted elements with a fan
Heating benches with a fan
Floor convectors with a fan
Wall-mounted elements - OKIOC
Heating and aftercooling
New design
High outputs
Easy control
OC range product – provides all benefits of this range, i.e. mainly low noise and el. power input
Silent operation
OKIOC Innovative solution of heating and aftercooling
New product specially designed for systems with a low heating water temperature, e.g. 35/30
Suitable for heat pump heating systems
Heating output up to 7kW, cooling up to 1kW
High efficiency at low gradients As compared to standard elements
COOLING heat pump HEATING
Heating benches with a fan - OLOC
New product specially designed for systems with a
low heating water temperature down to 35/30
Suitable for heat pump heating systems
Heating benches with a fan - OLOC
OLOC 9/18
OLOC 15/18
OLOC 9/24 Exclusive
Higher emphasis on appearance
Use of an aluminium covering grille
Steel casing, the same control as PKOC
News New division of PKOC Economical
Basic version of heating elements black varnished steel tub –
register without surface finish
Exclusive
Higher emphasis on appearance black varnished steel tub
black varnished register
Inox
Stainless-steel tub design and non-varnished heating register
CAUTION, for dry environment only
Overview of produced PKOC ranges PKOC 7/28
PKOC 11/28
PKOC 9/28
PKOC 11/42 with a J4 exchanger
PKOC 11/34 New type range
INNOVATION
PKOC for wet environment/PKBOC
Use of premium materials, AISI 316 chemical stainless steel Guarantee – operation and guarantee conditions specified by the manufacturer must be met
Identified with letter B (PKBOC)
Suitable for premises with Increased humidity
Swimming pool design PKBOC 11/34 InPool (stainless steel)
Only one dimensional range with the depth of 11 cm and width of 34 cm
PKIOC
Heating, aftercooling
PKIOC 9/20 Inox
PKIOC 13/34 Economical Exclusive Inox
The smallest high-performance fan-coil. All stainless-steel design as standard
CAUTION, for dry environment only
For heating and aftercooling
Extension of production lengths with 150 cm and 250 cm
Use of new fans with the diameter of 60 mm
New design and higher outputs
The range contains 5 lengths from 1m to 3m
Total 6 offered lengths that are identical to PKOC
Změna šířky z 28 na 34 cm
INNOVATION
PKWOC
The heating system is connected from one side and cooling from the other one
4-pipe systems – heating, cooling
Use of new fans with the diameter of 60 mm
New design and higher outputs
Extension of production lengths with 150 cm and 250 cm
INNOVATION
Control for OC
R- BOX – contains a module of galvanic separation of signals, significant simplification of installation on a DIN rail in a switchboard
DC power supply unit - will be newly delivered for installation on a DIN rail in a switchboard
Considerably simplified control
R box DC power supply unit
INNOVATION
Control for OC
The new RAB 11 thermostat fully replaces the older RAB 10 model
F box
Mbox replaced with a connection terminal board (F box) in each OC convector
Siemens RAB 11 Siemens RDF 400
The new RDF 400 thermostat replaces the RDF 210 type
INNOVATION
Control for OC – F box
Covering grilles, PM/aluminium
New design
New anodizing colours
High design level
Covering grilles, PM/stainless steel
Suitable for wet and dry environments, mat. AISI 304 i 316
Exclusive design of the stainless-steel covering grille
The covering grille is available including a stainless-steel frame
Suitable for places subject to high loads (high load-bearing capacity thanks to a
dense grid)
Covering grilles, PM/stainless steel – square profile
For dry environment only
New design of the stainless-steel covering grille
Suitable for places subject to high loads (high load-bearing capacity)
Catalogue 2012You will find more detailed
technical and output parameters in the Technical Catalogue 2012
LICON HEAT S.R.O.Průmyslová zóna Liberec Sever
460 11 LiberecCZECH REPUBLIC
Tel.: +420 485 131 157Fax: +420 485 130 331E-mail: info@licon.cz
http:// www.licon.czComing soon
Recommended