View
1
Download
0
Category
Preview:
Citation preview
14050 Simone Dr. Shelby Twp. Michigan 48315 , USA. Phone: 1-248-563-1623, Email: info@dfgus.com Website: www.ifinishingsystem.com
Inline Finishing SystemThe Leader in Advanced Post-Printing Finishing
• Conveyor receiving is optional
• Can be connected to folder
Proudly designed and
manufactured in the U.S.A.
Creases, cross and jump perforates
C 1150 – The World’s Most Cost Effective
Computer Controlled
vacuum high pile feeder:
• 4.5” loading capacity is standard. 7.5” is optional
Cross Perforation or Crease
• Up to 24 cross perforations . • Or up to 24 creases.
Window’s based
control system
• Easy to use.
Jump Perf
• Up to 72 jump perforations for one sheet pass.
• Up to 6 jump perf head can be used
Optional slitting / score
module
• Two slots for different combinations
• Software or manual adjusted positions
Receiving table
• Metal block design for long machine life
• Great for small, middle to larger size printing and finishing shops
• One CF 1150 can replace two stand alone machines. (Creaser and perforator)
• Fast – up to 6,200 center creases per hour
• Perforated business card, “T” or “L” sharped coupon, tickets or others
• High Productive
Cro
ss
Perf
/Cre
ase
Inte
rch
ange
able
Jum
pPe
rf
Slit
ter
(op
tio
nal
)
Rec
eive
r
Fee
der
14050 Simone Dr. Shelby Twp. Michigan 48315 , USA. Phone: 1-248-563-1623, Email: info@dfgus.com Website: www.ifinishingsystem.com
Inline Finishing SystemThe Leader in Advanced Post-Printing Finishing
DFG’s C 1150 is a leading vacuum, top high pile feeding creasing and perforating machine. It can accurately make creases for the full range of paper up to 425 gsm. It prevents document toner cracking. It also can make jump and cross perforations for different types of perforated business cards within postcards, T or L sharped coupons, or tickets for direct mailer. Just input sheet length, width, weight, type of folding, perf points and click “Run”. The machine will do the rest. .
C1150 does not fold. Please refer to ACF series for knife fold
In one sheet pass, you can make up to
• 24 creases • 24 cross perforations and • 72 jump perforations• 6 Slits (optional)
“L” Perforated
“T” Perforated
“3” Perforated
crease
Cross perf
Jump perf
Creases, cross and jump perforates,
• First pass make x-y perforations,• Second pass make crease
Need two sheet passes
14050 Simone Dr. Shelby Twp. Michigan 48315 , USA. Phone: 1-248-563-1623, Email: info@dfgus.com Website: www.ifinishingsystem.com
Inline Finishing SystemThe Leader in Advanced Post-Printing Finishing
Due to continuous product improvement, specifications are subject to change without notice, Data is from field tests under optimal conditions and only for reference.
Speed: Up to 6,200 sheets per hour. (1 creasing at 5.5” for 11” sheet) Feeder – Vacuum top pile feeding 4.5”loading capacity (upgradable to 7.5”)Sheet size: from 5.5” x 8” to 13” x 19” (with long sheet kit, sheet can be 40”)Sheet weight: crease from 110 to 425 gsm. Perforation from 110 to 300 gsmNumber of Positive crease per sheet pass: up to 24. Number of Negative crease per sheet pass: up to 24. Number of max cross perf and jump perf: 24 and 72Crease depth control: fully automatic by software based on paper weightPerforation depth controlled by software based on paper weightNumber of strike perforation head: 2 is standard. 3 or 4 or 5 or 6 are optional
Power: Single phase. 115 V, 60 Hz, 5A or 220V, 50 Hz, 3AMachine size: 60” (L) x 25” (D) x 50” (H) Shipping Weight: 600 lbs.
Specifications:
Optional:
Long sheets kit – loading table and receiver
Ultra heavy creasing matrix
Ultra thin creasing matrix
Heavy perf kit
3rd and / or 4th and / or 5th and / or 6th strike perforation tool
Slitter Module
C Series – Creasers
World’s fastest – up to 9,000 sheets per hour
C1500 / C1150 / C1000 / PC20 /PC10
ACF Series – Creaser,
perforation and Knife
Folders. World’s fastest at
its class – up to 12,000
Folders per hour
ACF 1500 / ACF 1200 /
ACF 1000
You might also interest:
SCCF Series – Slit, cut, crease, fold and moreSCC Series – Slit, cut, crease and moreSCCF 65 / SCCF 40 / SCC 65 / SCC40
DFF series – Slit, Cut, Crease, two-dimensional perforation and Knife Fold and more. World’s fastest and most versatile – DFF 56 / DFF 32
DF series – Slit, Cut, Crease, two-dimensional perforation and more. World’s fastest and most versatile – DF 56 / DF 32
Recommended