HEAVY DUTY 2-IN-1 COOLANT TREATMENT - LUBEGARD ·  · 2011-07-18• Chemically engineered to...

Provides 2-in-1 corrosion protection and temperature reduction:

•Protectswetsleevecylinderlinersfromcavitationerosion.

•Preventsbuildupofscales,deposits,andslimethatcauseoverheating.

•Provides100%protectionfromcorrosionandchemicalelectrolysis.

•Significantlyextendslifeofwaterpumpimpellersandseals.

•Chemicallyengineeredtoreducethesurfacetensionofcoolant,allowingittomoredeeplypenetratemetalsurfacesatvitalheat-transferareas.Thisdecreasesoperatingtemperaturesandsignificantlyreducesthepossibilityofengineoverheating.

Saves time and money:

•Eliminatestheneedtobuymultipleproducts.LUBEGARDHeavyDutyCoolantTreatmentistheonlysupplementalcoolantadditivethatcontainscompletecorrosionprotectionandwettingagents,allinone.

•Reducesfrequencyofdrainingandflushingcoolant.

• Lessfrequentrefillingofantifreezesavesmoney.

• Lesscorrosionanddamagetocoolingsystemmetalssignificantlylengthenstheeffectivelifeofradiators,heatercores,waterpumps,andenginecomponents,resultinginfewerexpensivefailuresandbreakdowns.

ENHANCES ALL COOLANTS IN DIESEL ENGINE APPLICATIONS FROM FARM TO FREEWAY.

IN INDEPENDENT LABORATORY TESTS LUBEGARD® 2-IN-1 HEAVY DUTY COOLANTTREATMENT OUTPERFORMED ALL OTHER SUPPLEMENTAL COOLANT ADDITIVES

TO SUCH A DEGREE THAT IT EFFECTIVELY STANDS IN A LEAGUE OF ITS OWN.

INTERNATIONAL LUBRICANTS INC.7930 Occidental South • Seattle WA 98108 • P.O. Box 24743 • Seattle, WA 98124800-333-LUBE (5823) • 206-762-5343 • Fax: 206-762-7989 • www.Lubegard.com

©2011ILI.Allrightsreserved. AL-183

NEW

Stock # 96430

Unit Size 32 fl. oz. / 946 ml

Case Weight/ Qty. 12.7 lb. / 6 per case

Comes with 2 nitrite & freeze point test strips

for checking coolant before and after treatment.

HEAVY DUTY 2-IN-1 COOLANT TREATMENT

Directions for use:

Withengineoffandcool,add1quart(946ml)ofLUBEGARD®HeavyDutycoolanttreatmentper8gallons(30.3L)ofcoolantwhenusedwitha50/50mix.Forstraightwatercoolant,add1quart(946ml)per4gallons(15.1L).Startengine,turnheatonhigh,andrunfor10minutestocirculatethroughtheentirecoolingsystem.Testcoolantevery3-6monthsusingLUBEGARD®HeavyDutyCoolantTreatmentteststripsandfollowdirectionstomaintainnitriteintherangeof1200-2400ppm.

How to use the LUBEGARD Heavy Duty Coolant Treatment test strips:

Safety Warning:Alwaysallowenginetocoolbeforeopeningradiatorcapfortesting,otherwiseseriousinjurycanoccur.

Test Procedure:Diponeteststripintocoolantsamplethatisbelow110°Ffor2seconds,remove,andshake.Holdstriplevelandmatchcolorasindicatedonteststrippackageforfreezepoint(padnearesthandle).After1minute,matchnitrite(endpad)color.

Results:Besuretomaintainnitriteintherangeof1200-2400ppm,with2000ppmbeingideal.Ifnitriteislessthan1200ppm,addLUBEGARDHDCOOLANTTREATMENTatthefulltreatrate.Ifnitriteis4000ppmorhigher,draintodilute,andrefillwithcoolant.Maintainfreezepointasweatherconditionsrequire.Tobeassuredofcompletefreezeprotection,50%-60%antifreezeisrecommended.(Note:LUBEGARDHeavyDutyCoolantTreatmentdoesNOTprovidefreezeprotection).

Important:Storethepacketsawayfromdirectsunlightandbelow80°F(27°C).Forbestresults,usebydateonpacket.

In independent laboratory tests LUBEGARD® 2-in-1 Heavy Duty Coolant Treatment outperformed all other Supplemental Coolant Additives (SCAs) to such a degree that it effectively stands in a league of its own.

EachofthemostsignificantHeavyDutySCAswastestedusingASTMcertifiedprocedures,includingASTMD4340,ASTMD1384,ASTMD2570,andASTMD2809.Alloftheseproductspassedthetests,withtheexceptionofPenray®PenCool2000andRedLine®DieselWaterWetter.Theseproductsfailedduetotheirinabilitytoprovideadequatecorrosionprotection—particularlyforaluminum.LUBEGARDpassedalltestswithmargintospare!

LUBEGARDistheonlySCAthatutilizesnewer,proprietaryorganictechnology,whichprovidescompletealuminumprotection.Andunlikesomecompetitors,LUBEGARDdoesnotcontainanyoutdatedingredients,suchasmolybdateorphosphate.Infact,DetroitDieselprohibitstheuseofphosphateintheircoolingsystems.BecauseLUBEGARDcontainsnophosphate,itreceivesacross-the-boardOEMacceptance.

LUBEGARDalsocontainswettingagentingredients,whichprovideenginetemperaturereductionperformance.Thiseliminatestheneedandexpenseofusinganadditionalproduct,likeRedLine®DieselWaterWetter.AndtestinghasshownthatthepolysiloxaneinWaterWetterpolymerizestoformanastylayerofbrownslimewithintheradiator.LUBEGARDdoesNOTcontainanypolysiloxaneingredients.

ForDECADES,PenCoolandFleetguardformulashavebeenthe“goldstandards”againstwhichallotherswerecompared.WiththeintroductionofLUBEGARD2-in-1HeavyDutyCoolantTreatment,thisisabouttochange.

INTERNATIONAL LUBRICANTS INC.7930OccidentalSouth•SeattleWA98108•P.O.Box24743•Seattle,WA98124800-333-LUBE (5823)•206-762-5343•Fax:206-762-7989•www.Lubegard.com

©2011ILI.Allrightsreserved. Alltrademarksareownedbytheirrespectivecompanies.

COMPARISON OF HEAVY DUTY SUPPLEMENTAL COOLANT ADDITIVES

TEST/PERFORMANCE LUBEGARD 2-in-1 HD

Pencool® 2000

Pencool® 3000

Fleetguard® DCA-2

Fleetguard® DCA-4

Redline® Diesel Water Wetter®

Provides 2-in-1 corrosion protection and temperature reduction, all in one product ✖Comes with 2 coolant test strips for checking coolant before/after treatment ✖Neck-style bottle for ease of pouring ✖ ✖Complete corrosion protection ✖ ✖ ✖ ✖Passes all ASTM tests ✖ ✖ ✖ ✖Protects high-dollar aluminum cooling system components from electrolysis and galvanic action

✖ ✖ ✖ ✖

Contains nitrite, which protects wet sleeve cylinder liners from damage caused by cavitation/erosion?

✖ ✖ ✖ ✖ ✖

Contains polymer dispersants, that prevent formation of insulating hard water scales ✖ ✖ ✖ ✖ ✖Does not contain polysiloxane polymer, which can cause brown slime in cooling system ✖ ✖ ✖ ✖ ✖Contains phenolphthalein color pH indicator for precise dosing and product application ✖ ✖ ✖Does not contain phosphate, which is prohibited by some OEMs ✖ ✖ ✖ ✖ ✖

Does not foam when agitated ✖ ✖ ✖ ✖ ✖Temperature reduction in degrees F. with 50/50 antifreeze/water 5 0 0 0 0 2

Temperature reduction in degrees F. with straight water coolant 14 2 4 3 5 10