View
230
Download
3
Category
Preview:
Citation preview
Commonwealth
of Australia Gazette No. TC 13/03, Wednesday, 23 January 2013 Published by the Commonwealth of Australia
TARIFF CONCESSIONS
CONTENTS
TCO Applications ....................................................................................................... 2
TCO Applications Reworded................................................................................... 16
TCO Applications Refused ...................................................................................... 17
TCOs Made................................................................................................................ 18
Local Manufacturer Initiated - TCO Revocation Requests .................................. 19
Local Manufacturer Initiated - TCOs Revoked ...................................................... 20
TCOs Revoked Unused for Over 2 years ............................................................... 21
TCOs Intention to Revoke - Unused for Over 2 years .......................................... 22
Section 273 Determinations Made .......................................................................... 26
Amended notification AAT Review of TCO Applications Results....................... 27
The Australian Customs and Border Protection Service (Customs and Border Protection) publishes the Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) free of charge on the Customs internet site at: http://www.customs.gov.au
Please select “tariff”, then “tariff concessions gazette”. The gazettes are listed in date order and may be selected from the list of Adobe
(PDF) files.
General Inquiries: ..............................................................(02) 6275 6404 Facsimile: ...........................................................................(02) 6275 6376
Cat. No.
ISSN 0813-8389
©Commonwealth of Australia, 2013
2 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
TCO Applications
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS
Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.
Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described
are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days
of the date of publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
Submission forms are available from Custom Houses throughout Australia or on the Customs web site
www.customs.gov.au.
For guidance on the required description style, phone 02 6275 6404, fax 02 6275 6376 or email
tarcon@customs.gov.au.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
3924.10.00 KITCHENWARE, being silicon scrapers with stainless steel eyelet
Op. 21.12.12 - TC 1248835
Stated Use:
For preparation of food
Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD
50
5%
3926.90.90 BARRIER TUBES, FLOOD, polyvinylchloride, air inflatable AND
water filled, including fittings
Op. 28.12.12 - TC 1249043
Stated Use:
To act as a barrier to flood and storm waters
Applicant: FIRE FIGHTING TECHNOLOGIES INTERNATIONAL PTY LTD
50
5%
4419.00.00 KITCHENWARE, being rubberwood AND silicone rolling pins
Op. 20.12.12 - TC 1248561
Stated Use:
In the kitchen in the preparation of food
Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD
50
5%
6902.10.00 REFRACTORY BRICKS, having ALL of the following:
(a) magnesia (Mg0) content NOT less than 38%;
(b) calcium oxide (Ca0) content NOT less than 40%;
(c) silica (Si02) content NOT greater than 5%;
(d) bulk density NOT less than 2g/cc
Op. 24.12.12 - TC 1248853
Stated Use:
Refractory linings for furnace ladles
Applicant: ONESTEEL NSW PTY LIMITED
50
5%
3 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7208.26.00 STEEL, flat rolled, iron OR non-alloy steel, hot rolled,
pickled, not coated, in coils, complying with Japanese
Industrial Standard G3134 (JIS G3134) grade SPFH590 OR Japanese
Industrial Standard G3113 (JIS G3113) grade SAPH440, having ALL
of the following:
(a) yield strength NOT less than 265 MPa and NOT greater than
600 MPa;
(b) tensile strength NOT less than 440 MPa;
(c) total elongation NOT less than 18% and NOT greater than
46%;
(d) in EITHER of the following sizes:
(i) thickness 3.20 mm and width 1 034 mm;
(ii) thickness 3.20 mm and width 1 350 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349335
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7208.27.00 STEEL, flat rolled, iron OR non-alloy steel, hot rolled,
pickled, not coated, in coils, complying with Japanese
Industrial Standard G3131 (JIS G3131), grades SPHC OR SPHD,
having ALL of the following:
(a) yield strength NOT less than 175 MPa and NOT greater than
325 MPa;
(b) tensile strength NOT less than 270 MPa;
(c) total elongation NOT less than 35% and NOT greater than
53%;
(d) in ANY of the following sizes:
(i) thickness 1.40 mm and width 1 050 mm;
(ii) thickness 1.40 mm and width 1 330 mm;
(iii) thickness 1.60 mm and width 1 228 mm;
(iv) thickness 1.80 mm and width 1 025 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349331
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
4 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7208.27.00 STEEL, flat rolled, iron OR non-alloy steel, hot rolled,
pickled, not coated, in coils, complying with Japanese
Industrial Standard G3134 (JIS G3134) grade SPFH590 OR Japanese
Industrial Standard G3113 (JIS G3133) grade SAPH440, having ALL
of the following:
(a) yield strength NOT less than 265 MPa and NOT greater than
600 MPa;
(b) tensile strength NOT less than 440 MPa;
(c) total elongation NOT less than 18% and NOT greater than
46%;
(d) in ANY of the following sizes:
(i) thickness 1.40 mm and width 1 150 mm;
(ii) thickness 2.00 mm and width 836 mm;
(iii) thickness 2.60 mm and width 1 120 mm;
(iv) thickness 2.60 mm and width 1 246 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349332
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7209.16.00 STEEL, flat rolled, iron OR non-alloy steel, cold rolled, in
coils, not coated, complying with Japanese Industrial Standard
G3135 (JIS G3135), grade SPFC440 OR SPFC590, having ALL of the
following:
(a) yield strength NOT less than 265 MPa and NOT greater than
560 MPa;
(b) tensile strength NOT less than 440 MPa;
(c) total elongation NOT less than 18%;
(d) in ANY of the following sizes:
(i) thickness 1.20 mm and width 962 mm;
(ii) thickness 1.20 mm and width 1 090 mm;
(iii) thickness 1.20 mm and width 1 306 mm;
(iv) thickness 1.40 mm and width 715 mm;
(v) thickness 1.40 mm and width 1 182 mm;
(vi) thickness 1.40 mm and width 1 185 mm;
(vii) thickness 1.40 mm and width 1 302 mm;
(viii) thickness 1.60 mm and width 1 240 mm;
(ix) thickness 1.80 mm and width 1 132 mm;
(x) thickness 1.80 mm and width 1 166 mm;
(xi) thickness 1.80 mm and width 1 225 mm;
(xii) thickness 2.00 mm and width 890 mm;
(xiii) thickness 2.00 mm and width 990 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349343
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
5 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7209.17.00 STEEL, flat rolled, iron OR non-alloy steel, cold rolled, not
coated, in coils, having ALL of the following;
(a) yield strength NOT greater than 210 MPa;
(b) tensile strength NOT less than 250 MPa;
(c) total elongation NOT less than 40%;
(d) in ANY of the following sizes:
(i) thickness 0.75 mm and width 1 150 mm;
(ii) thickness 0.75 mm and width 1 435 mm;
(iii) thickness 0.75 mm and width 1 565 mm;
(iv) thickness 0.75 mm and width 1 640 mm;
(v) thickness 0.75 mm and width 1 700 mm;
(vi) thickness 0.80 mm and width 1 220 mm;
(vii) thickness 0.80 mm and width 1 565 mm;
(viii) thickness 0.80 mm and width 1 580 mm;
(ix) thickness 0.80 mm and width 1 584 mm;
(x) thickness 0.80 mm and width 1 585 mm;
(xi) thickness 0.80 mm and width 1 590 mm;
(xii) thickness 0.80 mm and width 1 625 mm;
(xiii) thickness 0.85 mm and width 1 730 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 24.12.12 - TC 1248927
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7209.17.00 STEEL, flat rolled, iron OR non-alloy steel, cold rolled, not
coated, in coils, having ALL of the following:
(a) yield strength NOT less than 185 MPa;
(b) tensile strength NOT less than 340 MPa;
(c) total elongation NOT less than 32%;
(d) in ANY of the following sizes:
(i) thickness 0.70 mm and width 1 235 mm;
(ii) thickness 0.70 mm and width 1 350 mm;
(iii) thickness 0.70 mm and width 1 425 mm;
(iv) thickness 0.70 mm and width 1 450 mm;
(v) thickness 0.70 mm and width 1 453 mm;
(vi) thickness 0.70 mm and width 1 470 mm;
(vii) thickness 0.70 mm and width 1 485 mm;
(viii) thickness 0.70 mm and width 1 510 mm;
(ix) thickness 0.70 mm and width 1 520 mm;
(x) thickness 0.70 mm and width 1 530 mm;
(xi) thickness 0.75 mm and width 1 390 mm;
(xii) thickness 0.75 mm and width 1 525 mm;
(xiii) thickness 0.75 mm and width 1 555 mm;
(xiv) thickness 0.75 mm and width 1 710 mm;
(xv) thickness 0.75 mm and width 1 740 mm;
(xvi) thickness 0.75 mm and width 1 800 mm;
(xvii) thickness 0.80 mm and width 1 435 mm;
(xviii) thickness 0.80 mm and width 1 585 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 24.12.12 - TC 1248928
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
6 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7209.17.00 STEEL, flat rolled, iron OR non-alloy steel, cold rolled, not
coated, in coils, complying with Japanese Industrial Standard
G3141 (JIS G3141) grades SPCC, SPCD OR SPCE having ALL of the
following:
(a) yield strength NOT less than 115 MPa and NOT greater than
265 MPa;
(b) tensile strength NOT less than 270 MPa;
(c) total elongation NOT less than 36% and NOT greater than
57%;
(d) in ANY of the following sizes:
(i) thickness 0.50 mm and width 870 mm;
(ii) thickness 0.55 mm and width 1 430 mm;
(iii) thickness 0.75 mm and width 1 625 mm;
(iv) thickness 0.75 mm and width 1 670 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349338
Stated Use:
For use in PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7209.17.00 STEEL, flat rolled, iron OR non-alloy steel, cold rolled,
not coated, in coils, complying with Japanese Industrial
Standard G3135 (JIS G3135), grades SPFC440, OR SPFC590, having
ALL of the following:
(a) yield strength NOT less than 265 MPa and NOT greater than
560 MPa;
(b) tensile strength NOT less than 440 MPa;
(c) total elongation NOT less than 18%;
(d) in ANY of the following sizes:
(i) thickness 0.80 mm and width 1 097 mm;
(ii) thickness 1.00 mm and width 1 010 mm;
(iii) thickness 1.00 mm and width 1 120 mm;
(iv) thickness 1.00 mm and width 1 390 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349341
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7209.18.00 STEEL, flat rolled, iron OR non-alloy steel, cold rolled, not
coated, in coils, complying with Japanese Industrial Standard
G3141 (JIS G3141) grades SPCC, SPCD OR SPCE, having ALL of the
following:
(a) yield strength NOT less than 115 MPa and NOT greater than
265 MPa;
(b) tensile strength NOT less than 270 MPa;
(c) total elongation NOT less than 36% and NOT greater than
57%;
(d) in EITHER of the following sizes:
(i) thickness 0.40 mm and width 745 mm;
(ii) thickness 0.40 mm and width 960 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349336
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7210.30.00 STEEL, flat rolled, iron OR non-alloy steel, tin AND zinc alloy
electrolytically coated, in coils, having ALL of the
following:
(a) yield strength NOT less than 115 MPa and NOT greater than
370 MPa;
(b) tensile strength NOT less than 270 MPa;
(c) total elongation NOT less than 33%;
(d) total coating mass NOT less than 30 g/m2 and NOT greater
than 50 g/m2 on each side;
(e) thickness 0.40 mm and width 970 mm
For the purposes of this Order, tolerances allowable for
specification (e) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349355
Stated Use:
For use in PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
8 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7210.30.00 STEEL, flat rolled, iron OR non-alloy steel, tin AND zinc alloy
electrolytically coated, in coils, having ALL of the
following:
(a) yield strength NOT less than 115 MPa and NOT greater than
370 MPa;
(b) tensile strength NOT less than 270 MPa;
(c) total elongation NOT less than 33%;
(d) total coating mass NOT less than 30 g/m2 and NOT greater
than 50 g/m2 on each side;
(e) in ANY of the following sizes:
(i) thickness 0.60 mm and width 980 mm;
(ii) thickness 0.80 mm and width 1 159 mm;
(iii) thickness 0.80 mm and width 1 209 mm;
(iv) thickness 0.80 mm and width 890 mm;
(v) thickness 1.00 mm and width 780 mm;
(vi) thickness 1.00 mm and width 840 mm;
(vii) thickness 1.00 mm and width 865 mm
For the purposes of this Order, tolerances allowable for
specification (e) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349357
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7210.49.00 STEEL, flat rolled, non-alloy steel, hot dipped galvannealed
zinc coated, in coils, having ALL of the following:
(a) yield strength NOT greater than 210 MPa;
(b) tensile strength NOT less than 270 MPa;
(c) total elongation NOT less than 40%;
(d) total coating mass NOT less than 30 g/m2 and NOT greater
than 70 g/m2 on each side;
(e) in ANY of the following sizes:
(i) thickness 0.75 mm and width 1 390 mm;
(ii) thickness 0.75 mm and width 1 450 mm;
(iii) thickness 0.75 mm and width 1 475 mm;
(iv) thickness 0.75 mm and width 1 530 mm;
(v) thickness 0.75 mm and width 1 565 mm;
(vi) thickness 0.75 mm and width 1 640 mm;
(vii) thickness 0.76 mm and width 1 220 mm;
(viii) thickness 0.80 mm and width 1 350 mm;
(ix) thickness 0.95 mm and width 820 mm;
(x) thickness 1.00 mm and width 624 mm
For the purposes of this Order, tolerances allowable for
specification (e) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 24.12.12 - TC 1248929
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
9 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7210.49.00 STEEL, flat rolled, non-alloy steel, hot dipped galvannealed
zinc coated, in coils, having ALL of the following:
(a) yield strength NOT less than 190 MPa;
(b) tensile strength NOT less than 340 MPa;
(c) total elongation NOT less than 32%;
(d) total coating mass NOT less than 30 g/m2 and NOT greater
than 70 g/m2 on each side;
(e) in ANY of the following sizes:
(i) thickness 0.70 mm and width 865 mm;
(ii) thickness 0.70 mm and width 980 mm;
(iii) thickness 0.70 mm and width 1 225 mm;
(iv) thickness 0.70 mm and width 1 244 mm;
(v) thickness 0.70 mm and width 1 300 mm;
(vi) thickness 0.70 mm and width 1 350 mm;
(vii) thickness 0.70 mm and width 1 370 mm;
(viii) thickness 0.70 mm and width 1 400 mm;
(ix) thickness 0.70 mm and width 1 410 mm;
(x) thickness 0.70 mm and width 1 455 mm;
(xi) thickness 0.70 mm and width 1 500 mm;
(xii) thickness 0.70 mm and width 1 585 mm;
(xiii) thickness 0.70 mm and width 1 710 mm;
(xiv) thickness 0.70 mm and width 1 720 mm;
(xv) thickness 0.65 mm and width 865 mm;
(xvi) thickness 0.65 mm and width 1 800 mm;
(xvii) thickness 1.00 mm and width 1 160 mm
For the purposes of this Order, tolerances allowable for
specification (e) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 24.12.12 - TC 1248930
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7210.49.00 STEEL, flat rolled, non-alloy steel, hot dipped galvannealed
zinc coated, in coils, having ALL of the following:
(a) yield strength NOT less than 165 MPa and NOT
greater than 325 MPa;
(b) tensile strength NOT less than 270 MPa;
(c) total elongation NOT less than 35% and NOT
greater than 50%;
(d) total coating mass NOT less than 45 g/m2 and NOT
greater than 65 g/m2 on each side;
(e) thickness 2.00 mm and width 1 070 mm
For the purposes of this Order, tolerances allowable for
specification (e) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349350
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
10 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7210.49.00 STEEL, flat rolled, non-alloy steel, hot dipped galvannealed
zinc coated, in coils, having ALL of the following:
(a) yield strength NOT less than 115 MPa and NOT greater than
305 MPa;
(b) tensile strength NOT less than 270 MPa;
(c) total elongation NOT less than 37% and NOT greater
than 57%;
(d) total coating mass NOT less than 35 g/m2 and NOT greater
than 65 g/m2 on each side;
(e) in ANY of the following sizes:
(i) thickness 0.65 mm and width 870 mm;
(ii) thickness 0.65 mm and width 930 mm;
(iii) thickness 0.65 mm and width 1 150 mm;
(iv) thickness 0.65 mm and width 1 640 mm;
(v) thickness 0.65 mm and width 1 645 mm;
(vi) thickness 0.65 mm and width 1 680 mm;
(vii) thickness 0.65 mm and width 1 710 mm;
(viii) thickness 0.70 mm and width 925 mm;
(ix) thickness 0.70 mm and width 930 mm;
(x) thickness 0.70 mm and width 1 000 mm;
(xi) thickness 0.70 mm and width 1 005 mm;
(xii) thickness 0.70 mm and width 1 010 mm;
(xiii) thickness 0.70 mm and width 1 045 mm;
(xiv) thickness 0.70 mm and width 1 455 mm;
(xv) thickness 0.70 mm and width 1 485 mm;
(xvi) thickness 0.70 mm and width 1 550 mm;
(xvii) thickness 0.75 mm and width 1 135 mm;
(xviii) thickness 0.75 mm and width 1 140 mm;
(xix) thickness 0.75 mm and width 1 625 mm;
(xx) thickness 0.75 mm and width 1 670 mm;
(xxi) thickness 0.80 mm and width 1 060 mm;
(xxii) thickness 0.80 mm and width 1 150 mm;
(xxiii) thickness 0.80 mm and width 1 200 mm;
(xxiv) thickness 1.00 mm and width 1 610 mm;
(xxv) thickness 1.20 mm and width 1 595 mm;
(xxvi) thickness 2.30 mm and width 985 mm
For the purposes of this Order, tolerances allowable for
specification (e) are:
(a) thickness +/- 10%
(b) width +/- 1
Op. 28.12.12 - TC 1349351
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
11 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7210.49.00 STEEL, flat rolled, non-alloy steel, hot dipped galvannealed
zinc coated, in coils, having ALL of the following:
(a) yield strength NOT less than 155 MPa and NOT
greater than 295 MPa;
(b) tensile strength NOT less than 340 MPa;
(c) total elongation NOT less than 34%;
(d) total coating mass NOT less than 35 g/m2 and NOT
greater than 65 g/m2 on each side;
(e) in ANY of the following sizes:
(i) thickness 0.70 mm and width 830 mm;
(ii) thickness 0.70 mm and width 855 mm;
(iii) thickness 0.75 mm and width 840 mm;
(iv) thickness 0.75 mm and width 855 mm;
(v) thickness 0.75 mm and width 1 630 mm;
(vi) thickness 0.75 mm and width 1 645 mm;
(vii) thickness 0.75 mm and width 1 683 mm;
(viii) thickness 0.75 mm and width 1 700 mm;
(ix) thickness 1.20 mm and width 1 170 mm;
(x) thickness 1.20 mm and width 1 175 mm;
(xi) thickness 1.20 mm and width 1 198 mm;
(xii) thickness 1.60 mm and width 1 160 mm
For the purposes of this Order, tolerances allowable for
specification (e) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349352
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7210.49.00 STEEL, flat rolled, non-alloy steel, hot dipped galvannealed
zinc coated, in coils, having ALL of the following:
(a) yield strength NOT less than 235 MPa and NOT greater than
400 MPa;
(b) tensile strength NOT less than 390 MPa;
(c) total elongation NOT less than 28%;
(d) total coating mass NOT less than 35 g/m2 and NOT greater
than 65 g/m2 on each side;
(e) in ANY of the following sizes:
(i) thickness 2.00 mm and width 975 mm;
(ii) thickness 2.30 mm and width 948 mm;
(iii) thickness 2.30 mm and width 1 030 mm;
(iv) thickness 2.30 mm and width 1 190 mm;
(v) thickness 2.60 mm and width 1 230 mm
For the purposes of this Order, tolerances allowable for
specification (e) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349354
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
12 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7226.92.00 STEEL, flat rolled, alloy steel, cold rolled, complying
with Japanese Industrial Standard G3135 (JIS G3135), grade
SPFC980Y, having ALL of the following:
(a) yield strength NOT less than 580 MPa and NOT greater than
920 MPa;
(b) tensile strength NOT less than 980 MPa;
(c) total elongation NOT less than 11% and NOT greater than
22%;
(d) thickness 1.40 mm and width 435 mm
For the purposes of this Order, tolerances allowable for
specification (d) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 28.12.12 - TC 1349347
Stated Use:
In PMV car body outer skins
Applicant: BLUESCOPE STEEL (AIS) PTY LTD
50
5%
7306.19.00 LINE PIPE, ELECTRIC RESISTANCE WELDED (ERW), complying with
American Petroleum Institute Standard Specification 5L (API 5L)
and International Standard 3183,(ISO 3183), having a diameter
exceeding 168.3 mm
Op. 18.12.12 - TC 1248298
Stated Use:
Transmission of gas in high pressure gas pipeline
Applicant: ARROW ENERGY LTD
50
5%
7308.90.00 SPACE FRAMES, SPHERICAL DISH, SOLAR CONCENTRATOR, having BOTH
of the following:
(a) maximum wind loading NOT greater than 147.6 kilometres
per hour;
(b) maximum force on base NOT greater than 170 000 kN
Op. 21.12.12 - TC 1248776
Stated Use:
Mounting of mirror panels which focus sunlight onto DC power
generation cells in concentrated photovoltaic power
configurations
Applicant: SOLAR SYSTEMS PTY LTD
50
5%
7311.00.00 TANKS, RECEIVER, welded, having BOTH of the following:
(a) maximum pressure capacity NOT greater than 19 barg;
(b) liquid volume capacity NOT less than 145 cubic metres
Op. 20.12.12 - TC 1248563
Stated Use:
For the supply of plant, instrument and feed air in a nitrogen
generation system
Applicant: AUSTRALIA PACIFIC LNG PROCESSING PTY LTD
50
5%
13 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
7326.20.00 STEEL WIRE FIBRES, deformed AND cut, cold drawn with hooked
ends, having ALL of the following:
(a) conforming to American Society for Testing and Materials
(ASTM) A820 type 1;
(b) length NOT less than 18 mm and NOT greater than
66 mm;
(c) diameter NOT less than 0.405 mm and NOT greater than
1.115 mm;
(d) tensile strength NOT less than 1 000 MPa;
(e) carbon content NOT greater than 0.095%
Op. 21.12.12 - TC 1248839
Stated Use:
For concrete reinforcement
Applicant: V L P PRODUCTS PTY LTD
50
5%
7326.90.90 COUPLINGS, TRAM, being tow bars including spherical bearings
Op. 21.12.12 - TC 1248771
Stated Use:
For the connecting and towing broken down tram carriages by a
tram recovery vehicle
Applicant: BOMBARDIER TRANSPORTATION AUSTRALIA PTY LTD
50
5%
7605.11.00 WIRE, aluminium, complying with Australian Standard 2848
(AS 2848)
Op. 21.12.12 - TC 1248836
Stated Use:
Aluminium wire for the manufacture of bare overhead
conductors
Applicant: PRYSMIAN TELECOM CABLES & SYSTEMS AUSTRALIA PTY LTD
50
5%
7907.00.90 JOINERS AND/OR TENSIONERS AND/OR HANGERS, METAL CABLE OR ROPE,
with OR without rubber pad, having BOTH of the following:
(a) serrated teeth;
(b) release mechanism
Op. 21.12.12 - TC 1248778
Stated Use:
For use in heating, air conditioning and ventilation
applications; for suspending mechanical and electrical services
and signage
Applicant: POLYPLAS PTY LTD
50
5%
8402.20.00 BOILERS, GAS WASTE, tubular, catalytic, having ALL of the
following:
(a) operating pressure NOT less than 6 000 kPa;
(b) operating temperature NOT less than 400 degrees Celsius;
(c) flow rate NOT less than 40 000 kg/h
Op. 21.12.12 - TC 1248840
Stated Use:
Production of high pressure, superheated steam for various
applications within a nitric acid production plant
Applicant: ORICA AUSTRALIA PTY LTD
50
5%
14 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8419.81.90 DISPENSING MACHINES, having ALL of the following:
(a) one OR two OR three hoppers;
(b) mixing chamber for each hopper;
(c) tank OR water mains connection;
(d) proportion adjustment control;
(e) push button operation
Op. 21.12.12 - TC 1248837
Stated Use:
Push button fully automatic hot drink dispensing machine, for
dispensing of espresso, cappuccino, and latte hot drinks
Applicant: CANTARELLA BROS PTY LTD
50
5%
8428.90.00 PAPER ROLL HANDLING SYSTEM, programmable logic controlled, with
OR without lowerator up-ender AND/OR roller ramp with arrestor,
having ALL of the following:
(a) paper length handling capability NOT less than 3 metres;
(b) paper roll weight NOT less than 3.5 tonnes;
(c) slat conveyors;
(d) shuttle conveyors;
(e) electrical and control cabinets
Op. 02.01.13 - TC 1349362
Stated Use:
For the transport of paper rolls
Applicant: VISY INDUSTRIES AUSTRALIA PTY LTD
50
5%
8429.59.90 BACKHOE LOADERS, wheeled, having ALL of the following:
(a) side shift backhoe;
(b) maximum speed NOT greater than 11 km/h in forward OR
reverse gears;
(c) diesel engine gross power output greater than 32 kW;
(d) self-levelling loader bucket, in both upward
and downward movement
Op. 20.12.12 - TC 1248692
Stated Use:
Excavation, digging, loading of earth materials in construction,
site works and related environments
Applicant: C.F.C. HOLDINGS PTY LTD
50
5%
8430.50.00 COMPACTORS, vibratory plate, pedestrian operated
Op. 20.12.12 - TC 1248559
Stated Use:
Pedestrian operated compaction of granular soils and asphalt
through the vibratory action of the base plate
Applicant: HITACHI CONSTRUCTION MACHINERY (AUSTRALIA) PTY LTD
50
5%
15 TCO Applications Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8479.89.90 CONTROL MODULE MOUNTING BASES, SUBSEA, whether OR not assembled,
having ALL of the following:
(a) frame structures;
(b) baseplates;
(c) hydraulic tubing;
(d) connectors;
(e) return compensation system
Op. 20.12.12 - TC 1248602
Stated Use:
Mounting base for subsea control modules
Applicant: CAMERON AUSTRALASIA PTY LTD
50
5%
8479.89.90 WHEEL FLANGE LUBRICATION SYSTEM, TRAM, including ALL of the
following:
(a) casing AND/OR base support with flange to wheel housing;
(b) compressed air supply module AND control module;
(c) grease tank combination AND dosing system;
(d) pipe AND hose lines;
(e) spraying nozzles
Op. 21.12.12 - TC 1300437
Stated Use:
To work automatically for the sporadic lubrication of the wheels
to track to avoid seizing and similar
Applicant: BOMBARDIER TRANSPORTATION AUSTRALIA PTY LTD
50
5%
8479.90.00 PARTS, SUBSEA TEST TREE, OIL AND/OR GAS WELL, being latch
mandrels
Op. 28.12.12 - TC 1349360
Stated Use:
To space out the subsea test tree (SSTT) valves and helical
latch within the blow out preventer (BOP)
Applicant: SCHLUMBERGER AUSTRALIA PTY LTD
50
5%
8507.10.10 ACCUMULATORS, lead acid, 12 V, having all of the following:
(a) valve regulated (sealed);
(b) immobilised electrolyte;
(c) absorbent glass mat separators
Op. 24.12.12 - TC 1248842
Stated Use:
For use in motor vehicle interior installation
Applicant: EXIDE AUSTRALIA PTY LTD
50
5%
8507.10.90 ACCUMULATORS, MARINE, lead acid, 12 V, having all of
the following:
(a) valve regulated (sealed);
(b) immobilised electrolyte;
(c) absorbent glass mat separators;
(d) spiral wound plates
Op. 24.12.12 - TC 1248843
Stated Use:
Power source for fridges, lighting and as a starter
for an internal combustion engine
Applicant: EXIDE AUSTRALIA PTY LTD
50
5%
16 TCO Applications Reworded Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
TCO Applications R ewor ded
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION PARAGRAPH 269L(4B)(b) - PROPOSAL TO AMEND DESCRIPTION OF GOODS FOLLOWING AN
OBJECTION SUBMISSION
Amended descriptions have been proposed for the Tariff Concession Order applications shown in the following
TABLE.
Australian manufacturers who consider that there are reasons why the Tariff Concession Order as proposed to be
amended should not be made are invited to lodge a submission. Submissions must be lodged no later than 14
days after the publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
8481.40.00 VALVES, PRESSURE RELIEF, REFRIGERATION AND AIR CONDITIONING
Op. 09.10.12 - TC 1238194
Stated Use:
For the protection and control of equipment subjected to
pressures from air, gas, vapour, steam and liquid that may
exceed their design limits
Applicant: HELDON PRODUCTS AUSTRALIA PTY LTD
50
8504.40.90 BATTERY CHARGERS, closed loop control, having ALL of the
following:
(a) power rating greater than 2 kW but NOT greater than 30 kw;
(b) maximum output current greater than 50 A but NOT greater
than 500 A;
(c) simultaneously wet AND dry cell charging
Op. 05.10.12 - TC 1237923
Stated Use:
To charge wet and dry cell batteries simultaneously
Applicant: FASTCHARGE AUSTRALIA PTY LTD
50
17 TCO Applications Refused Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
TCO Applications R efused
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED
Applications for Tariff Concession Orders for the goods described in the following TABLE have been refused.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
8431.49.90 PARTS, EARTH MOVING AND/OR MINING MACHINERY, GROUND ENGAGING
TOOLS, being ANY of the following:
(a) tooth AND/OR teeth shapes;
(b) point shapes;
(c) adapters;
(d) edges;
(e) end bits;
(f) segments;
(g) wear plates;
(h) side cutters;
(i) corner gussets;
(j) scarifier shanks;
(k) tips;
(l) cutting edges;
(m) shrouds;
(n) hot slag pins
Op. 03.09.12 - TC 1233053
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Bradken Resources Pty Ltd, Kilburn, SA and Keech
Castings Australia Pty Ltd, Bendigo, Vic
50
8433.60.00 SORTERS, FRUIT AND/OR VEGETABLE, programmable logic controlled,
including ALL of the following:
(a) optical size sensors;
(b) optical colour sensors;
(c) discharge chutes;
(d) conveyors
Op. 20.08.12 - TC 1230661
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by GP Graders (Victoria) Pty Ltd, Mount Waverley, Vic
50
18 TCOs Made Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
TCOs M ade
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders have been made for the goods described in the following TABLE.
The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of
substitutable goods may request the revocation of TCOs at any time.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
3808.93.00 HERBICIDES, technical intermediate, having a basis of NOT less
than 37% clethodim
Op. 05.11.12 Dec. date 21.01.13 - TC 1242279
50
3926.90.90 CHAIR MATS, HARD FLOOR, plastic, textured surface top
Op. 06.11.12 Dec. date 21.01.13 - TC 1242360
50
8414.59.90 BLOWERS, ROTARY PISTON, PNEUMATIC CONVEYANCE, pressure NOT
greater than 1 000 mbar
Op. 26.10.12 Dec. date 21.01.13 - TC 1241141
50
8421.19.00 CENTRIFUGES, SOLID FROM LIQUID SEPARATION, variable speed drive,
whether OR not assembled, having ALL of the following:
(a) maximum bowl speed NOT less than 3 700 rpm and NOT greater
than 4 100 rpm;
(b) maximum liquid flow capacity NOT less than 700 L/min
and NOT greater 1 000 L/min;
(c) maximum gravitational force NOT less than 2 700 g and NOT
greater than 3 300 g
Op. 05.11.12 Dec. date 21.01.13 - TC 1242274
50
8422.30.90 CARTON LABELLING MACHINES, programmable logic controlled, having
ALL of the following:
(a) labelling heads;
(b) stepping motors;
(c) belts;
(d) output capacity NOT greater than 450 cartons per minute
Op. 30.10.12 Dec. date 21.01.13 - TC 1241511
50
8479.89.90 CENTRIFUGES, BODY TISSUE AND/OR BODY FLUID, programmable logic
controlled, including ALL of the following:
(a) centrifuge;
(b) raw material and sample handling robotic arms;
(c) LCD screen
Op. 05.11.12 Dec. date 21.01.13 - TC 1242273
50
8484.20.00 CONNECTOR ASSEMBLIES, FLOWLINE, whether OR not assembled, having
ALL of the following:
(a) threaded studs;
(b) clamps;
(c) butt weld hubs;
(d) nuts;
(e) seal ring
Op. 30.10.12 Dec. date 21.01.13 - TC 1241372
50
8504.40.90 RECTIFORMERS, with OR without cooling module, direct current
output rating NOT less than 50 kA at 1 000 V
Op. 30.10.12 Dec. date 21.01.13 - TC 1241512
50
8513.10.00 LIGHTS, LED, battery powered, being slip-on finger lights
Op. 05.11.12 Dec. date 21.01.13 - TC 1242277
50
8714.91.00 FRAMES, BICYCLE, with OR without forks
Op. 31.10.12 Dec. date 21.01.13 - TC 1241566
50
19 TCOs Made and
Local Manufacturer Initiated - TCO Revocation Requests
Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8716.40.00 TRAILERS, BICYCLE, stroller convertible, having ALL of the
following:
(a) universal attachment rod;
(b) quick release trailer wheels;
(c) retractable stroller front wheel;
(d) detachable stroller push handle;
(e) stroller parking brake
Op. 31.10.12 Dec. date 21.01.13 - TC 1241613
50
9603.90.00 DUSTERS, polyester microfibre, with plastic handle
Op. 08.11.12 Dec. date 21.01.13 - TC 1242620
50
Local M anufac tur er Initiated - TC O R evocation R equests
NOTIFICATION OF AN AUSTRALIAN INDUSTRY REVOCATION REQUEST - SECTION 269SC(1A) CUSTOMS ACT
An application has been lodged for revocation of the Tariff Concession Order set out in the following TABLE.
The Lodgement Request Date shown in the table below is the intended revocation date for the Tariff Concession
Order which will take effect should the application for revocation be successful.
Importations not covered by in-transit provisions may be subject to post action as any decision to revoke an
order is backdated to the date of request for revocation.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Lodgement Request Date
7225.40.00 PLATES OR SHEETS, high alloy steel, grain refined, quenched and
tempered, having ALL of the following:
(a) hardness NOT less than 570 HBW and NOT greater than 640 HBW;
(b) yield strength NOT less than 1 300 N/mm2;
(c) tensile strength NOT less than 2 000 N/mm2;
(d) elongation NOT less than 7%
Op. 18.11.09 Dec. date 19.03.10 - TC 0943669
50
14.01.13
20 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Local M anufac tur er Initiated - TC Os R evoked
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION
ORDERS REVOKED
The Tariff Concession Orders for the goods described in the following TABLE have been revoked.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
9405.10.00 LUMINAIRES, LIGHT-EMITTING DIODE (LED), non-ceramic, with or
without LED drivers
Op. 15.05.08 Dec. date 08.08.08 - TC 0808275
Substitutable goods produced in the ordinary course of business
by Coolon Pty Ltd, Hallam, Victoria. In transit provisions
apply.
50
21.11.12
9405.10.00 FLOODLIGHTS, non-ceramic, with or without globes that have a
rating NOT greater than 150 W
Op. 30.04.08 Dec. date 15.08.08 - TC 0825010
Substitutable goods produced in the ordinary course of business
by Coolon Pty Ltd, Hallam, Victoria. In transit provisions
apply.
50
21.11.12
9405.10.00 LIGHTS, BAY, Light Emitting Diodes (LED), non-ceramic
Op. 20.08.08 Dec. date 14.11.08 - TC 0827293
Substitutable goods produced in the ordinary course of business
by Coolon Pty Ltd, Hallam, Victoria. In transit provisions
apply.
50
21.11.12
9405.10.00 FLOODLIGHTS, non ceramic except for globe holder
Op. 23.02.09 Dec. date 12.02.10 - TC 1007362
Substitutable goods produced in the ordinary course of business
by Coolon Pty Ltd, Hallam, Victoria. In transit provisions
apply.
50
21.11.12
9405.40.00 LIGHTING ASSEMBLIES, OBSERVATION WHEEL, comprising ALL of the
following:
(a) programmable light emitting diode (LED) tubing;
(b) integral power supply;
(c) computer controls;
(d) mounting racks
Op. 23.04.07 Dec. date 29.06.07 - TC 0705865
Substitutable goods produced in the ordinary course of business
by Coolon Pty Ltd, Hallam, Victoria. In transit provisions
apply.
50
21.11.12
9405.40.00 LIGHTS, LED OPTIC COLOUR, modular, extruded or cast metal
Op. 05.05.08 Dec. date 01.08.08 - TC 0806480
Substitutable goods produced in the ordinary course of business
by Coolon Pty Ltd, Hallam, Victoria. In transit provisions
apply.
50
21.11.12
9405.40.00 WORK LIGHTS, non-ceramic with OR without ceramic bulb holder
Op. 01.06.12 Dec. date 20.08.12 - TC 1218913
Substitutable goods produced in the ordinary course of business
by Coolon Pty Ltd, Hallam, Victoria. In transit provisions
apply.
50
21.11.12
21 TCOs Revoked Unused for Over 2 years
Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
TCOs R evoked U nused for Over 2 years
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF CUSTOMS
The Tariff Concession Orders listed in THE TABLE below have not been used for at least 2 years and have been
revoked under Section 269SD(1A). In transit provisions apply.
The intention to revoke these orders was notified in Gazette TC12/51 dated 19 Dec 2012.
Contact: Phone 02 6275 6404, fax 02 6275 6376 or email tarcon@customs.gov.au.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8424.81 DUSTERS, knapsack type, hand operated, powder distributing
Op. 18.05.92 Dec. date 18.05.92 - TC 9204899
Revoked: 2 years non-use. In transit provisions apply.
50
16.01.13
8501.32.00 SERVO MOTORS, DC, SELF-COMMUTATING, having ALL of the following:
(a) permanent magnet stator, with magnets attached to the body
Of the motor;
(b) wound armature;
(c) tachometer, encoder or resolver;
(d) cylindrical housing having a diameter of NOT less than
55 mm but NOT exceeding 105 mm;
(e) continuous stall torque rating of NOT less than 0.2 N.m
but NOT exceeding 7 N.m;
(f) terminal voltage of NOT less than 40 V DC but NOT
exceeding 180 V DC;
but NOT including servo motors having gear boxes
Op. 20.02.98 Dec. date 08.05.98 - TC 9801548
Revoked: 2 years non-use. In transit provisions apply.
50
16.01.13
8536.49 SWITCHES, where the first impulse to the coil operates the
contacts and where a second impulse to the same coil resets the
contacts to their original position, but NOT including
switches where a local manual reset returns the contacts to
their original position
Op. 01.01.88 Dec. date 17.02.94 - TC 9400997
Revoked: 2 years non-use. In transit provisions apply.
50
16.01.13
22 TCOs Intention to Revoke - Unused for Over 2 years
Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
TCOs Intention to Revoke - U nused for Over 2 years
COMMERCIAL TARIFF CONCESSION ORDERS (CTCOs) & TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS
The Chief Executive Officer (CEO) is satisfied that CTCOs and TCOs listed in the table below are no longer
required because, in the 2 years preceding the day of this notice, they have not been quoted in an import
declaration to secure a concessional rate of duty.
From Thursday, 21 February 2013, it is intended to take action to revoke these Orders under subsection
269SD(1A) of the Customs Act 1901. In accordance with subsection 269SG(2) of the Customs Act 1901, in-transit
provisions shall apply. If revoked, the expected date of effect is 21 February 2013.
Interested parties are invited to provide, by close of business, Wednesday, 20 February 2013, written reasons
why an Order should NOT be revoked.
Please advise if any of the Orders listed below have been quoted on an import declaration.
If a request is made to retain an Order used for the granting of a Determination, please specify the
Determination and the linked Item number to enable mapping to the Order and its scope.
Contact: Email tarcon@customs.gov.au, fax 02 6275 6376 or phone 02 6122 5540.
THE TABLE
Tariff
Classification Description Concession Number
8426.19.00 SHIP UNLOADERS, BAUXITE, rail mounted
Op. 07.09.09 Dec. date 27.11.09 - TC 0932965
8427.10.00 TRUCKS, PLATFORM, battery operated, comprising ALL of the
following:
(a) maximum load capacity NOT less than 6 tonnes and
NOT greater than 14 tonnes;
(b) maximum load lift height NOT greater than 0.8 meters;
(c) steer and lift remote controller;
(d) paved surface wheels and/or railway tracks wheels
Op. 30.08.05 Dec. date 12.12.05 - TC 0510935
8427.10.00 ORDER PICKERS, rider operated, having ALL of the following:
(a) lifting capacity greater than 1 950 kg at a 600 mm
load centres;
(b) maximum fork or platform lift greater than 799 mm
and less than 1201 mm;
(c) A/C powered steering with steering wheels;
(d) duplicate speed and raise/lower controls on the control
arms and the backrests
Op. 05.08.05 Dec. date 29.07.06 - TC 0612223
8428.33.00 FEEDERS, LOG AND SAWN TIMBER SAWLINE, PLC, belt driven
Op. 25.08.04 Dec. date 15.11.04 - TC 0408734
8428.33.00 CONVEYORS, TOILET AND/OR PAPER TOWEL ROLL
Op. 11.08.06 Dec. date 21.07.08 - TC 0817165
8428.39.00 RECLAIMERS, ROTARY SCREW, WOOD CHIP, comprising ALL of the
following:
(a) rotary screws;
(b) plates;
(c) slip rings;
(d) turrets;
(e) chutes
Op. 19.02.09 Dec. date 15.05.09 - TC 0905757
23 TCOs Intention to Revoke - Unused for Over 2 years
Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Tariff
Classification Description Concession Number
8428.39.00 TRANSFER LINE SYSTEM, MOTOR VEHICLE, single line
Op. 07.05.09 Dec. date 31.07.09 - TC 0915498
8436.99.00 AGRICULTURAL MACHINERY WHEELS AND/OR RIMS, drop centre, divided or
lock ring types, rated to 30 kmh maximum speed, in the sizes listed
in the table below:
TABLE
Drop Centre Types
Imperial measurement Metric measurement
in inches in millimeters
rim rim rim rim
diameter width diameter width
8" x 2.5" 203.2 x 63.5
8" x 3" 203.2 x 76.2
8" x 4.5" 203.2 x 114.3
10" x 3" 254 x 76.2
10" x 3.5" 254 x 88.9
10" x 4" 254 x 101.6
10" x 4.5" 254 x 114.3
12" x 3" 304.8 x 76.2
12" x 10.5" 304.8 x 266.7
14" x 3" 355.6 x 76.2
14.5" x 6.75" 368.3 x 171.45
14.5" x 7" 368.3 x 177.8
15" x 3" 381 x 76.2
15" x 9" 381 x 228.6
15" x 10" 381 x 254.0
15" x 13" 381 x 330.2
15.3" x 9" 388.62 x 228.6
15.5" x 8.25" 393.7 x 209.55
15.5" x 11.75" 393.7 x 298.45
15.5" x 13" 393.7 x 330.2
16" x 2.15" 406.9 x 54.61
16" x 3" 406.9 x 76.2
16" x 9" 406.9 x 228.6
16" x 11" 406.9 x 279.4
16.1" x 11" 408.94 x 279.4
16.1" x 14" 408.94 x 355.6
16.1" x 16" 408.94 x 406.4
16.5" x 6.75" 419.1 x 171.45
16.5" x 8.25" 419.1 x 209.55
16.5" x 9.75" 419.1 x 247.65
17" x 2.15" 431.8 x 54.61
17" x 11" 431.8 x 279.4
17" x 13" 431.8 x 330.2
17" x 15" 431.8 x 381.0
17.5" x 5.25" 444.5 x 133.35
17.5" x 6" 444.5 x 152.4
17.5" x 6.75" 444.5 x 171.45
17.5" x 8.25" 444.5 x 209.55
17.5" x 11.75" 444.5 x 298.45
18" x 2.15" 457.2 x 54.61
18" x 3" 457.2 x 76.2
18" x 5.5" 457.2 x 139.7
18" x 9" 457.2 x 228.6
18" x 11" 457.2 x 279.4
18" x 13" 457.2 x 330.2
24 TCOs Intention to Revoke - Unused for Over 2 years
Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
18" x 14" 457.2 x 355.6
19" x 2.5" 482.6 x 63.5
19" x 3" 482.6 x 76.2
19.5" x 6" 495.3 x 152.4
19.5" x 6.75" 495.3 x 171.45
19.5" x 7.5" 495.3 x 190.5
19.5" x 11.75" 495.3 x 298.45
19.5" x 12.5" 495.3 x 317.5
19.5" x 13" 495.3 x 330.2
19.5" x 14" 495.3 x 355.6
20" x 5.5" 508 x 139.7
20" x 6.5" 508 x 165.1
20" x 9" 508 x 228.6
20" x 11" 508 x 279.4
20" x 13" 508 x 330.2
20" x 14" 508 x 355.6
21" x 3" 533.4 x 76.2
22.5" x 6" 571.5 x 152.4
22.5" x 6.75" 571.5 x 171.45
22.5" x 11.75" 571.5 x 298.45
22.5" x 13" 571.5 x 330.2
22.5" x 13.5" 571.5 x 342.9
22.5" x 14" 571.5 x 355.6
22.5" x 15" 571.5 x 381.0
22.5" x 15.5" 571.5 x 393.7
30" x 3" 762 x 76.2
36" x 4" 914.4 x 101.6
Divided Rim Type
Imperial measurement Metric measurement
in inches in millimeters
rim rim rim rim
diameter width diameter width
8" x 2.5" 203.2 x 63.5
8" x 3" 203.2 x 76.2
8" x 4.5" 203.2 x 114.3
Lock Ring Type
Imperial measurement Metric measurement
in inches in millimeters
rim rim rim rim
diameter width diameter width
8" x 3" 203.2 x 76.2
8" x 4.33" 203.2 x 109.98
9" x 4" 228.6 x 101.6
9" x 6" 228.6 x 152.4
10" x 5" 254 x 127.0
10" x 5.5" 254 x 139.7
10" x 6" 254 x 152.4
10" x 6.5" 254 x 165.1
11" x 7" 279.4 x 177.8
12" x 5" 304.8 x 127.0
12" x 6" 304.8 x 152.4
12" x 8" 304.8 x 203.2
13" x 5" 330.2 x 127.0
13" x 7" 330.2 x 177.8
14" x 5" 355.6 x 127.0
14" x 6" 355.6 x 152.4
Op. 12.09.95 Dec. date 09.11.95 - TC 9511197
25 Review of Application Decision
Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
CUSTOMS ACT 1901 - NOTIFICATION OF REQUEST FOR REVIEW OF APPLICATION DECISIONS
Requests have been received for review by Customs of decisions made on the applications for the Tariff
Concession Orders for goods described in the following TABLE.
THE TABLE
Description of Goods including the
Customs Tariff Classification
Schedule 4 Item Number
Date of Lodgement of Request
Initial
Decision
7302.40.00 PARTS, FUNICULAR ROPEWAY RAIL TRACK, RAIL TYPE S18,
COMPLYING WITH AUSTRALIAN STANDARD 4722-2009
(AS 4722-2009), being EITHER of the following:
(a) fish plates;
(b) sole plates
Op. 11.07.12 - TC 1224724
50
14.01.13
REFUSE
7302.90.00 PARTS, FUNICULAR ROPEWAY RAIL TRACK, RAIL TYPE S18,
COMPLYING WITH AUSTRALIAN STANDARD 4722-2009
(AS 4722-2009), being ANY of the following:
(a) rail joiners;
(b) steel rail track support sections;
(c) rail clips;
(d) bed plates
Op. 11.07.12 - TC 1224728
50
14.01.13
REFUSE
26 Section 273 Determinations Made
Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Sec tion 273 D eter minati ons Made NOTICE OF DETERMINATIONS MADE UNDER PART XVI OF THE CUSTOMS ACT 1901
Under subsection 273B(2) of the Customs Act 1901, notice is hereby given of the making of determinations
applying to goods of a kind specified in the table below.
In the table:
(i) the first column specifies the kind of goods to which the determination applies, any conditions specified
in the determination, the commencement and cessation dates of the determination and the Determination
reference number;
(ii) the second column specifies the item in Schedule 4 to the Customs Tariff Act 1995 that applies to the
specified goods.
(iii) ‘AD’ indicates the determination was made by AusIndustry.
(iv) ‘DE’ indicates that the determination was made by Australian Customs and Border Protection Service.
Goods ancillary to an EPBS project, including office equipment, buildings, office/personnel accommodation and
goods used in activities such as land preparation, road construction and maintenance, transportation (other
than pipes, pipelines, conveyors, power transmission lines, flexible flow lines, etc integral to the project
and used to convey gas liquids, minerals, electricity or other materials or goods) and the provision of
telecommunications and other general services are excluded. Materials, consumables and construction and
servicing equipment, including all fuels, oils lubricants, adhesives, filters, protective garments, tools,
ladders (other than articles auxiliary to and designed to be permanently attached to eligible goods under
EPBS, such as pylons, supporting structures, staircases, ladders, railings, etc) paint, varnish and the like
are ineligible under EPBS, as are spare parts used for on-going maintenance beyond the commissioning of the
project.
EPBS Determinations also apply to all goods listed in the Determination when they are imported in multiple
shipments, which may be from different locations at different times.
Where a number of EPBS Determinations are issued for a particular eligible good, all associated Determinations
must not exceed the quantity of goods approved by the Delegate in the EPBS Project Eligible Goods List.
THE TABLE
Importer
Project Proponent
Project Name
Description of Goods
Dates of Effect
Exclusions
Schedule 4
Item Number
Goods, imported by QCLNG OPERATING COMPANY PTY LTD (ABN 19138872385),
for use in the QGC Pty Limited (ABN 11089642553), QGC Upstream
and Queensland Curtis LNG, as follows:
(a) Components (including commissioning spare parts) for two (2)
only Liquid Natural Gas (LNG) Processing Trains; each comprising
ALL of the following:
i. acid gas remover;
ii. dehydration and mercury remover;
iii. ethylene refrigerator;
iv. heavies remover and natural gas liquid (NGL) recoverer;
v. inlet separator and NGL recoverer;
vi. liquefaction and methane compressor;
vii. nitrogen generator, storage containers and handlers;
viii. propane refrigerator;
ix. refrigerant storage.
But specifically excluding:
x. Articles auxiliary to and designed to be permanently attached to
eligible goods under EPBS, such as pylons, support structures,
staircases, ladders, railings etc.
xi. All infill steel, pipes and racks and other auxiliary
structures such as tie-in framework, support structures,
gantries and walkways which are external to the gas purification
and liquefaction modules; and
xii. All goods entered for home consumption between 1/01/2011 and
31/12/2012 covered by AD 01003023
01/01/2013 to 31/12/2013 -AD 01003562
71
27 Section 273 Determinations Made, and
Amended Notification AAT Review of TCO Applications Results
Commonwealth of Australia Gazette
No TC 13/03, Wednesday, 23 Jan 2013
Goods, imported by QCLNG OPERATING COMPANY PTY LTD (ABN 19138872385),
for use in the QGC Pty Limited (ABN 11089642553), QGC Upstream
and Queensland Curtis LNG, as follows:
(a) Components (including commissioning spare parts) for four(4) only
Marine Loader Arms, liquid and/or gas transfer integral to the
project.
But specifically excluding:
(i) Articles auxiliary to and designed to be permanently attached
to eligible goods under EPBS, such as pylons, support
structures, staircases, ladders, railings etc.
(ii) All infill steel, pipes and racks, and other auxiliary
structures such as tie-in framework, support structures
gantries and walkways that do not convey gas, liquids, minerals
electricity or other material or goods between the items listed
above.
(iii) All goods entered for home consumption between 01/01/2011 and
31/12/2012 covered by AD 01003024.
01/01/2013 to 31/12/2013 - AD 01003563
71
Amended notification AAT Revi ew of TCO Applicati ons Results AMENDED NOTICE OF RESULTS OF REVIEW OF A DECISION MADE UNDER PROVISIONS OF ADMINISTRATIVE APPEALS
TRIBUNAL ACT 1975
The application lodged with the Administrative Appeals Tribunal under section 29 of the Administrative Appeals
Tribunal Act 1975 for a review of the decision of the Australian Customs and Border Protection Service in
respect of the Tariff Concession Order for the goods described in the following TABLE has been resolved.
The operative date (Op.) and TC reference number follow the description of goods.
The decision of the Administrative Appeals Tribunal follows the description of goods.
THE TABLE
Description of Goods including the
Customs Tariff Classification
Schedule 4
Item Number
8703.21.20 VEHICLES, OFF ROAD, ALL TERRAIN, four wheel drive, including ALL
of the following:
(a) maximum power-to-weight ratio exceeding 5 kW/100 kg;
(b) dry weight NOT greater than 900 kg;
(c) side-by-side seating;
(d) twin cylinder, liquid cooled, four stroke engine having a
capacity NOT greater than 1 000 cc
Op. 05.12.2011 - TC 1140436
AAT Decision: TCO APPLICATION TO BE ACCEPTED AS A VALID
APPLICATION
AAT Decision Date: 20 December 2012
50
Applicant: BRP (Australia) Pty Ltd
Recommended