View
286
Download
1
Category
Preview:
Citation preview
7/25/2019 Gagemaker 2004 Catalog
1/32
GAGEMAKERCATALOG
PPPPPRODUCTRODUCTRODUCTRODUCTRODUCT IIIIINFORMATIONNFORMATIONNFORMATIONNFORMATIONNFORMATION
Calibration Equipment
Large Diameter Measurement
Thread Measurement
API and Premium Gages
7/25/2019 Gagemaker 2004 Catalog
2/32
2
Gagemaker, Inc. is a Houston-based manufacturer of precisionmechanical inspection equipment for the Quality Control industry.We have provided quality gauging equipment to the oilfield,
automotive and general machining industries since 1982.
PRODUCT WARRANTY
GAGEMAKER warrants its products to be free from defects in material and workmanship for one year from
the date of shipment. At our option, we will repair or replace any defective product upon return, prepaid,
properly packed to our factory in Pasadena, Texas. This warranty applies to all products when used in a
normal industrial environment. Any unauthorized tampering, misuse or neglect will make this warranty null
and void. Under no circumstances will GAGEMAKER or any affiliate have any liabilities for loss or for any
indirect or consequential damages. The foregoing warranties are in lieu of all other warranties expressed or
implied, including but not limited to, the implied warranties of merchantability and fitness for a particular
purpose.
We market and sell our products to over 35 countries around theworld. Our employees pride themselves on problem solving andcontinuous product improvement. The result of these efforts issupplying our customers with the best products and servicepossible.
Today, Gagemaker is recognized as a leader in the fields of:
Calibration Equipment Large Diameter Measurement Thread Diameter Measurement API and Premium Gages
Our catalog provides a detailed listing of the products available. Asyou browse through this book, you will find we are a completesource for all your quality needs.
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
3/32
Prices subject to change without notice 1/04
CalibrationEquipment
Due to the versatility, our Calibration Equipment iswidely used throughout the inspection industry.
The MIC TRAC measurement center combinesaccuracy with flexibility to ideally adapt to the shop flooror to the quality lab. The proven accuracy makes theMIC TRAC a perfect choice for part inspection andserves as a setting master for gages produced byleading gage manufacturers. The unit comes in severallengths as well as different accuracies. Our MT-3000series provides tolerance of .0001" and our MT-4000series provides tolerance of .00003".
Customers who have implemented an in-housecalibration system with the MIC TRAC not only realize asubstantial savings, but achieve greater control overthe inspection of their gauging equipment.
Threaded Plug
Tapered Plug
Cylindrical Plug
3
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
4/32
4
GAGE SETTING SYSTEM
This package features the MIC TRAC as a multi-use gage setting system. The system sets or zeros mostgages with the use of interchangeable anvils or blocks. Standard resolution of base unit is .00005".Accuracies range from .0001" to .0004". (MT CPU is CE approved.)
MIC TRAC base unit w/ range: 0" to 12" with TF-1F blocks and shipping carton
MT-3012-50 BASIC GAGE SETTING SYSTEM
GAGE SETTING SYSTEM OPTIONS
Expand or upgrade the basic gage setting system with the addition of other accessories and setting blocks.
Model No. Description Unit Price
MT-3012-50 MIC TRAC base unit w/ range: 0" to 12" internal, 1" to 13" external
MT-3024-50 MIC TRAC base unit w/ range: 0" to 24" internal, 1" to 25" external
MT-3036-50 MIC TRAC base unit w/ range: 0" to 36" internal, 1" to 37" external
MT-3048-50 MIC TRAC base unit w/ range: 0" to 48" internal, 1" to 49" external
MT-FL Force-Lok Option
TF-10 Tapered setting blocks 10 half angle
TF-15 Tapered setting blocks 15 half angle
TF-20 Tapered setting blocks 20 half angle
TF-30 Tapered setting blocks 30 half angle
TF-45 Tapered setting blocks 45 half angle
SPECIAL PURPOSE SETTING BLOCKS
TF-.5F Carbide Flat Face Setting Blocks (.750" outside dim.)
TF-1F Flat face setting blocks (1.500" outside dim.)
TF-BX 23 angled face setting blocks
TF-1V 1-5 pitch 60 "V" thread setting blocks
TF-2V 6-20 pitch 60 "V" thread setting blocks
TF-1A 2-3 pitch ACME/STUB ACME thread setting blocks
TF-2A 4-20 pitch ACME/STUB ACME thread setting blocks
OTHER BASE UNITS (Includes TF-1F block set)
TAPERED CYLINDER SETTING BLOCKS (2 block sets)
THREAD GAGE SETTING BLOCKS
TF-1F
TF-BX
TAPERED SETTINGBLOCKS
TF-1A
TF-2A
MT-3012-50
MT-CPU
TF-.5F
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
5/32
Prices subject to change without notice 1/04
CAL-PAK Complete calibration packageIncludes: TF-IND, TF-DG, TF-CA, TF-SA, TF-TI, TF-SV, TF-SS, TF-VN,TF-MTL, and storage case
TF-IND AGD dial indicator calibration fixture (includes .375" and 8mm bushing andTF-2F block)
TF-DG Calibration fixture for depth micrometer *
TF-CA Caliper calibration accessory dial, digital and vernier calipers. IncludesTF-SA support arm.
TF-TI Test indicator calibration block *
TF-SV "V" Support accessory ** for calibrating micrometers and standards
TF-SS Straight support accessory * for support of extended probes
TF-VN "V" blocks for calibration of axial travel probes and bore gages
TF-MTL Micrometer spindle thread lead calibration fixture.
TF-1F Flat face setting block set (2 blocks) 1.5000" outside dimension
TF-BA Base support block for setting dial bore gages **
TF-VB "V" block fixture for calibration of Gagemaker's TH-3004 and MRP-2002
Upper arms *
TF-LG Gagemaker lead gage calibration fixture *
TF-ALG Lead gage calibration fixture *
TF-BI Base support plate for setting dial bore gages **
CRC-MT4000 Complete procedural documentation for the calibration of handheld inspectionequipment including; O.D. & I.D. micrometers, calipers, depth micrometers,ring and plug gages, and more.
CRC-MT3000 Complete procedural documentation for the calibration of handheld inspectionequipment including; O.D. & I.D. micrometers, calipers, depth micrometers,ring and plug gages, and more.
HAND GAGE CALIBRATION SYSTEMThis package features the MIC TRAC as a mufti-use gage calibration system. The system uses interchangeableanvils to calibrate a variety of handheld style gages. Through the various configurations of fixtures, the MICTRAC achieves an accuracy of .0001" (cumulative per every 12" of travel). Resolution is .00005".(MT CPU is CE approved.) The standard package incorporates the ForceLokfeature to provide
the operator with a constant anvil force that improves repeatability from operator to operator.
Package includes:
MT-3012-50-FL MIC TRAC base unit w/ range: 0" to 12", includes TF-1F blocks and shipping carton.
CAL-PAK, complete calibration fixture package
CRC-MT3000 Calibration Reference Sheets - Calibration procedures for use with CAL-PAK
HGC-12-HT-FL HAND GAGE CALIBRATION PACKAGE
GAGE CALIBRATION SYSTEM OPTIONS
The following base units and accessories are available for larger requirements.
Model No. Description Unit Price
HGC-24-HT-FL Above calibration package with MT-3024-50F, w/ range 0" to 24"
HGC-36-HT-FL Above calibration package with MT-3036-50F, w/ range 0" to 36"
HGC-48-HT-FL Above calibration package with MT-3048-50F, w/ range 0" to 48"
PRN-100 Electronic pr inter for hardcopy records
PRN-000 Replacement printer paper
OTHER PACKAGES
SYSTEM PRINTER AND PAPER
CALIBRATION ACCESSORY BLOCKS AND FIXTURES
* 1/TF-1F block required with this accessory
** 2/TF-1F blocks required with this accessory
TF-BI
TF-ALGTF-VB
TF-BA
TF-LG
TF-1F
TF-CA
TF-IND
TF-SA
TF-MTL
TF-DG
TF-SS
TF-VNTF-SV
MT-3012-50-FL
MT-CPU
CRC-MT-3000
PRN-100
PRN-000
TF-TI
5
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
6/32
6
PRECISION GAGE CALIBRATION SYSTEMThis package features the MIC TRAC/MT-4000 as a precision calibration system. The system acceptsfixtures that inspect and calibrate a wide range of gage diameters and thread pitches. The packageincludes all the equipment necessary to calibrate precision hand held gages. Ring and plug inspectionrequires the purchase of additional accessories.
Package includes: MT-4012-10 MIC TRAC electronic adjustable measurement master, range 0" to 12". Base unit is
segmentally linear error corrected to an accuracy of .00005", resolution .00001 ", travel 12.000".
Ultra precision scale with 1.00" travel, Accuracy .00002", resolution .00001", travel 1.000".
Desktop computer with CCS-9002 Calibration Control Software for Windows installed. Software
has a report writer, a recall database, and a digital data acquisition module. Network compatible.
CRC MT-4000 Calibration Reference Card Set - procedures documenting calibrations with the
Gagemaker system
TF-2R, Carbide anvil set, 3/8" diameter
TF-XYT, Adjustable X,Y & tilt support table for use with the MIC TRAC
CAL-PAK, Assortment of fixtures designed to hold gages for calibration
TDWIN Thread Disk for Windows software program, Provides critical thread dimensions for
manufacturing and inspection of UN, ACME, Stub ACME, Metric, Buttress, and NPT threads.
Torque wrench, 50 in. lb. AWH-100 Benchtop tool holder with wrenches
Reusable shipping container
PGC-12-W2 PRECISION CALIBRATION PACKAGE
Training Options: Option A: Training at customers facility (per day, plus airfare)Option B: Training at Gagemakers facility (per day, per person)
ADDITIONAL PACKAGES & CALIBRATION ACCESSORIESThe following base units and accessories are available for larger requirements.
PRECISION CALIBRATION SYSTEM ACCESSORIES (* requires TF-2R blocks)
TDWIN Thread Disk for Windows software program calculates critical threaddimensions for manufacturing and inspection of UN, ACME, Stub ACME,Metric, Buttress, and NPT threads
TF-SB Adjustable height support table
TF-XYT Adjustable height, X axis & Y axis support base
TF-WS Thread wire set for 6,8,10,12,14,16,18,20,24,28,32 pitch "V" threads *
TF-CR Set of 3 fixtures for measuring cylindrical ring gages and bores.CR-1 (.170"-.230"), CR-2 (.250"-.875"), CR-3 (.880"-Larger)
TF-CP Ball contact holders, .500 ID measurement.
TF-IT Internal threaded ring bal l P.D. module (for solid style rings)
TF-2R 3/8" dia. carbide anvil set
TF-TP Calibrat ion fixture for NPT, NPTF, and ANPT tapered plug gages,Includes wire for 27, 18, 14, & 11 1/2 pitch threaded plugs.
TF-SP For holding gage pins vertical.
TF-AWH Allen wrench holder with wrenchs
TW-50 50 in-lb torque wrench w/ 5/32" hex wrench adapter
** Wire holder modules with 1 set of wires from 1.0mm to 4.5mm.
CCS-9002
MT-4012-10
CRC MT-4000TF-XYT
TW-50
AWH-100
TF-CR
TW-50 TF-SB
TF-WS
TF-IT
TF-2RTF-TP
Model No. Description Unit Price
PGC-24-W2 Above calibration package with MT-4024-10 MIC TRAC 0"-24" range
PGC-36-W2 Above calibration package with MT-4036-10 MIC TRAC 0"-36" range
PGC-48-W2 Above calibration package with MT-4048-10 MIC TRAC 0"-48" range
OTHER PACKAGES
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
7/32
Prices subject to change without notice 1/04
INSPEX Digital readout software with report writer and digital data aquisition module
CCS-9001 Calibration software for Microsoft WindowsTM with recall database, RS-232interface download utility, and text file editor for inspection report writing.Customer must supply computer with CD-ROM capable of runningWindows. (CALSPEX & RECALL)
CCS-9002 Gage calibration software for Microsoft WindowsTMwith calibration reports,recall database, and digital data collection module. Customer must supplycomputer with CD-ROM capable of running Windows. (CALSPEX,RECALL & INSPEX)
ADDITIONAL PACKAGES & CALIBRATION ACCESSORIES Continued
CALIBRATION AND DATA COLLECTION SOFTWARE OPTIONS
CCS-9002
TF-SB
TF-CP
TF-XYT
TW-50
TF-CR
7
TF-WHV-XX 60 thread wire holder modules with wires 5 pitch to 48 pitch
TF-WHV-XX 60 thread wire holder modules with wires 1-4 pitch, 56-72 pitch
TF-WHA-XX 29 thread wire holder modules with wires 4 pitch to 20 pitch
TF-WHA-XX 29 thread wire holder modules with wires 2 pitch, 3 pitch
TF-WHM-XX Metric thread wire holder modules with wires 1.0 mm -4.5mm pitch
TF-WHM-XX Metric thread wire holder modules with wires .5mm-.8mm, 5mm-6mm pitch
INDIVIDUAL THREADS WIRE HOLDER MODULES (Are supplied with one set wires-specify pitch)
MIC 360 Basic PackageThe basic gage package provides everything to measure external diameters 2" to 360" and internaldiameters 4" to 360" more accurately and repetitively than ever before. This package comes readyto install on any machine tool that accepts a 1" square tool holder. Other components and options
are listed below.
Model No. Description Package Price
WLGH-100 Internal/external gage head with infrared receiving unit
IRU-100 Infrared receiving unit w/ 20 ft. cable
DSP-300 Computer CPU
OPT-400 Standard optical light switch
OPT-401 Optical light switch mounting bracket
GWL-500-3.75 3.75" Diameter gage wheel
CBL-620 Light switch cable (20 ft.)
LI-BAT Spare Lithium Ion battery
LI-CHGR Lithium Ion battery charger
PEL-1600 Heavy duty storage and shipping case
MIC 360 DIAMETER GAGE PACKAGE
Installation and Training (per day, plus airfare and expenses)
TF-SP
MIC-360BASICPACKAGE
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
8/32
8
ThreadMeasurement
The most important factors when threaded partsmust meet engineering specifications, areaccuracy and consistency.
Our line of thread diameter gages inspects the
effects of all thread element variations and pitchdiameter of the threads.
Our functional thread roll gages use matchedsets of precision ground thread rolls that seat inthe threads during inspection. Each set of rolls isdesigned to ANSI specifications to measureunlimited diameters for a specific thread form.
Our pitch diameter gages use matched sets ofprecision contact points that seat at the pitch lineof the part during inspection. The contact pointsare interchangeable to allow measuring of differentthread pitches.
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
9/32
Prices subject to change without notice 1/04 9
Software Requirements Windows 95 or higher 4 MB RAM 3 MB of free hard disk space 3.5 disk drive or CD ROM
Features Uses ANSI tables, formulas, and tolerances Calculates standard and non-standard product thread diameters from #000 to 99.8 Calculates ANSI ring and plug gage dimensions Addresses pitches from 1 to 80 Calculates Gagemaker style thread gage setting dimensions
Provides immediate answers to program questions in online help
TDWIN Thread Disk for Windows software
TDWIN-UP Upgrade to TDWIN from TD-100, version 4.2.2
TDWIN-LIC5 Floating site license agreement, 5 users
TDWIN-LIC10 Floating site license agreement, 10 users
HOW TO ORDER1. Select the software version you
require (new version, upgradefrom any version below 4.2.2,or a site license).
Thread Dimension Screen
Thread Type Entry Screen
TDWINThread Disk for
Windows Software
The Thread Disk for Windows engineering software calculates critical dimensions for threads based
on ANSI tables and formulas. Thread types supported by the program include: UN, UNJ, and UNRSeries, ACME, Stub ACME, Stub ACME Modified I and II, Metric M & MJ, 7 X 45 Buttress, and GeneralPurpose Pipe Threads.
To generate critical dimensions instantly, enter basic thread information on the Thread Type Entryscreen, such as: thread type, thread class, nominal diameter, and threads per inch. Once the resultsare computed, tabs at the bottom of the program allow selection of several types of calculatedinformation, including dimensions and tolerances for product threads, ring gages, set plugs, pluggages or Gagemakers Thread Diameter gages.
If measuring internal and external shallow taper diameters is a problem, the Ball Mic SET DIM Toolprovides setting dimensions for ball micrometers or Gagemakers BX-1000 groove gage. The programcalculates ball mic settings for any tapered surface geometry.
Other features of the program include the ability to print thread dimension reports, providing a papercopy of any calculation. These reports provide the same critical dimensions that display in the program.
A multiple calculation window capability is a feature that allows performing several different threadcalculations at the same time. Also, online help is available to answer any questions about the program.
THREAD DISK FOR WINDOWS SOFTWARE
THREAD DIMENSIONS TDWIN
TDWIN Thread Disk for Windows Software
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
10/32
10
DPG-6000 Deep bore thread roll gage assembly 3" to 4.300" dia., 6" reach
DPG-8R Handle extension assembly 8" reach
DPG-12R Handle extension assembly 12" reach
DPG-2 Diameter extension arm 4.300" to 5.100" dia.
DPG-3 Diameter extension arm 5.100" to 5.900" dia.
DPG-4 Diameter extension arm 5.900" to 6.700" dia.
DPG-5 Diameter extension arm 6.700" to 7.500" dia.
DPG-6 Diameter extension arm 7.500" to 8.300" dia.
DPG-7 Diameter extension arm 8.300" to 9.600" dia.
EXTERNAL FUNCTIONAL PD THREAD INSPECTION GAGES(1 1/2" TO 24" DIAMETERS)
These functional thread inspection, or GO gages, measure external thread diameters. The gages areadjustable within a size range and use interchangeable thread rolls to measure different pitch threads.
Setting dimensions for the functional pitch diameter gages are provided by the TDWIN Thread Disk forWindows software package. The software is sold separately. Reference the pages that follow forspecific pitch thread rolls.
Model No. Description Range Unit Price
RG-7000 External thread roll gage 1" to 4"
RG-7001 External thread roll gage 4" to 8"
RG-7002 External thread roll gage 8" to 12"
RG-7003 External thread roll gage 12" to 16"
RG-7004 External thread roll gage 16" to 20"
RG-7005 External thread roll gage 20" to 24"
INTERNAL FUNCTIONAL PD THREAD INSPECTION GAGES(1 1/2" TO 24" DIAMETERS)Gagemaker also manufactures functional thread inspection gages that inspect internal threads. Thegages are adjustable within a size range and use interchangeable thread rolls to measure different pitchthreads.
Model No. Description Range Unit Price
PG-6000 Internal thread roll gage 1" to 9" dia., 2" reach
PG-6001 Internal thread roll gage 9" to 16"
PG-6002 Internal thread roll gage 16" to 24"
PG-6000-SA Replacement arm set 2" reach
PG-6000-XA Extended reach arm set 4" reach
DEEP BORE INTERNAL THREAD GAGE
*Prices do not include roll set
DPG-6000
RG-7000
PG-6000
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
11/32
Prices subject to change without notice 1/04
HOW TO ORDER
1. Select the PG-6000 (internalthreads) or RG-7000 (externalthreads) series gage model,based on the range ofdiameters being measured.
2. Select the thread roll model,based on the thread form (notincluded in price of gage).Specify the pitch.
THREAD ROLLS
UN SERIES THREAD ROLLS (For gages on previous page)"TRV" thread rolls inspect the functional fit of machine threaded parts with 60 "V" threadforms. These threadrolls are designed specifically for internal or external applications. Rolls are sold in matched sets (2 rolls).Specify the pitch of thread when ordering.
INTERNAL THREAD DIAMETERS EXTERNAL THREAD DIAMETERS
(1" to 24") (1" to 24")Model No. Description Price/Set
TRVI-4P 4 pitch internal 60 "V"
TRVI-5P 5 pitch internal 60 "V"
TRVI-6P 6 pitch internal 60 "V"
TRVI-8P 8 pitch internal 60 "V"
TRVI-10P 10 pitch internal 60 "V"
TRVI-12P 12 pitch internal 60 "V"
TRVI-14P 14 pitch internal 60 "V"
TRVI-16P 16 pitch internal 60 "V"
TRVI-18P 18 pitch internal 60 "V"
TRVI-20P 20 pitch internal 60 "V"
TRVE-4P 4 pitch external 60 V
TRVE-5P 5 pi tch external 60 "V"
TRVE-6P 6 pi tch external 60 "V"
TRVE-8P 8 pi tch external 60 "V"
TRVE-10P 10 pitch external 60 "V"
TRVE-12P 12 pitch external 60 "V"
TRVE-14P 14 pitch external 60 "V"
TRVE-16P 16 pitch external 60 "V"
TRVE-18P 18 pitch external 60 "V"
TRVE-20P 20 pitch external 60 "V"
ACMETHREAD DIAMETERS
(1" to 24")
ACME AND STUB ACME THREAD ROLLS (For gages on previous page)
"TRA and TRSA thread rolls inspect the functional fit of parts with 29 ACME and Stub ACME
threadforms. Specify the pitch of thread when ordering.
TRA-3P 3 pitch ACME
TRA-4P 4 pitch ACME
TRA-5P 5 pitch ACME
TRA-6P 6 pitch ACME
TRA-8P 8 pitch ACME
TRA-10P 10 pitch ACME
TRA-12P 12 pitch ACME
TRA-14P 14 pitch ACME
TRA-16P 16 pitch ACME
TRA-18P 18 pitch ACME
TRSA-3P 3 pitch Stub ACME
TRSA-4P 4 pitch Stub ACME
TRSA-5P 5 pitch Stub ACME
TRSA-6P 6 pitch Stub ACME
TRSA-8P 8 pitch Stub ACME
TRSA-10P 10 pitch Stub ACME
TRSA-12P 12 pitch Stub ACME
TRSA-14P 14 pitch Stub ACME
TRSA-16P 16 pitch Stub ACME
TRSA-18P 18 pitch Stub ACME
ISO METRIC SERIES THREAD ROLLS (For gages on previous page)
(1" to 24")Model No. Description Price/Set Model No. Description Price/Set
INTERNAL THREAD DIAMETERS EXTERNAL THREAD DIAMETERS(38.1mm to 609.6mm) (38.1mm to 609.6mm)
TRME-4P 4mm pitch
TRME-35P 3.5mm pitch
TRME-3P 3mm pitch
TRME-25P 2.5mm pitch
TRME-2P 2mm pitch
TRME-175P 1.75mm pitch
TRME-15P 1.5mm pitch
TRMI-4P 4mm pitch
TRMI-35P 3.5mm pitch
TRMI-3P 3mm pitch
TRMI-25P 2.5mm pitch
TRMI-2P 2mm pitch
TRMI-175P 1.75mm pitch
TRMI-15P 1.5mm pitch
Model No. Description Price/Set
TRM thread rolls inspect the functional fit of machine threaded parts with ISO metric 60 "V" threadforms.
NATIONAL 7 x 45 BUTTRESSTHREAD ROLLS"TRB" thread rolls inspect the functional fit of parts with 7 x 45 buttress threadforms. Specify thepitch of thread when ordering.
THREAD DIAMETER(1" to 24")
TRB745-2P 2 pitch, 7x 45
TRB745-3.5P 3.5 pitch, 7x 45
TRB745-4P 4 pitch, 7x 45
TRB745-6P 6 pitch, 7x 45
TRB745-8P 8 pitch, 7x 45
TRB745-10P 10 pitch, 7x 45
TRB745-12P 12 pitch, 7x 45
TRB745-16P 16 pitch, 7x 45
Model No. Description Price/Set
Specials - All other threadforms Price Available On Request
STUB ACMETHREAD DIAMETERS
Model No. Description Price/Set
Model No. Description Price/Set
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
12/32
12
SMALLER DIAMETER THREAD INSPECTION GAGES5/8" (.625) TO 1" (1.500) DIAMETERS
This line of thread inspection gages measures thread diameters smaller than 1.500".
Model No. Description Range Unit Price
SRG-7000 External Thread Roll/Pitch Diameter Gage 5/8" to 1"
SPG-6000 Internal Thread Roll/Pitch Diameter Gage 5/8" to 1"
SPR-BASE Benchmount stand Internal/External
"SRM" thread rolls inspect the functional fit of machine threaded parts with 60 ISO metric threadforms.These thread rolls are designed specifically for internal or external applications. Rolls are sold in matchedsets (2 rolls). Specify the pitch of thread when ordering.
INTERNAL THREAD DIAMETERS EXTERNAL THREAD DIAMETERS(16mm to 38mm) (16mm to 38mm)
UN SERIES THREAD ROLLS
"SRV" thread rolls inspect the functional fit of machine threaded parts with 60 "V" threadforms. These
thread rolls are designed specifically for internal or external applications. Rolls are sold in matched sets (2
rolls). Specify the pitch of thread when ordering.
INTERNAL THREAD DIAMETERS EXTERNAL THREAD DIAMETERS(.750 to 1.500) (.625 to 1.500)
Model No. Description Price/Set Model No. Description Price/Set
SRVI-6P 6 pitch internal 60 "V"
SRVI-7P 7 pitch internal 60 "V"
SRVI-8P 8 pitch internal 60 "V"
SRVI-9P 9 pitch internal 60 "V"
SRVI-10P 10 pitch internal 60 "V"
SRVI-11P 11 pitch internal 60 "V"
SRVI-12P 12 pitch internal 60 "V"
SRVI-13P 13 pitch internal 60 "V"
SRVI-14P 14 pitch internal 60 "V"
SRVI-16P 16 pitch internal 60 "V"
SRVI-18P 18 pitch internal 60 "V"
SRVI-20P 20 pitch internal 60 "V"SRVI-24P 24 pitch internal 60 "V"
SRVI-28P 28 pitch internal 60 "V"
SRVI-32P 32 pitch internal 60 "V"
SRVE-6P 6 pitch external 60 "V"
SRVE-7P 7 pitch external 60 "V"
SRVE-8P 8 pitch external 60 "V"
SRVE-9P 9 pitch external 60 "V"
SRVE-I0P 10 pitch external 60 "V"
SRVE-11P 11 pitch external 60 "V"
SRVE-12P 12 pitch external 60 "V"
SRVE-13P 13 pitch external 60 "V"
SRVE-14P 14 pitch external 60 "V"
SRVE-16P 16 pitch external 60 "V"
SRVE-18P 18 pitch external 60 "V"
SRVE-20P 20 pitch external 60 "V"SRVE-24P 24 pitch external 60 "V"
SRVE-28P 28 pitch external 60 "V"
SRVE-32P 32 pitch external 60 "V"
ISO METRIC THREAD ROLLS
Model No. Description Price/Set
SRM14P 4mm pitch SRME-4P 4mm pitch
SRMI-35P 3.5mm pitch SRME-35P 3.5mm pitch
SRMI-3P 3mm pitch SRME-3P 3mm pitch
SRMI-25P 2.5mm pitch SRME-25P 2.5mm pitch
SRMI-2P 2mm pitch SRME-2P 2mm pitch
SRMI-175P 1.75mm pitch SRME-175P 1.75mm pitch
Model No. Description Price/Set
EXTERNAL THREAD SUPPORT ROLLS
External thread diameters smaller than .500 require alternative diameter support rolls.
Model No. Description Price/Set
97.00
SP-2 For diameters smaller than .625" to .500" (.437 dia. roll)
SP-1 For diameters .625 and larger (Stock .385 dia. roll shipped with gage)
ISO METRIC ROLLS
SPG-6000
SRG-7000
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
13/32
Prices subject to change without notice 1/04
EXTERNAL PITCH DIAMETER INSPECTION GAGES(0" TO 72" DIAMETERS)
The ball pitch diameter gages or "NO GO" gages indicate the pitch diameter size of the products externalthread. The gages are adjustable within a size range and use interchangeable contact points to measuredifferent pitch threads. Setting dimensions for the pitch diameter gages are provided by the TDWIN Thread Diskfor Windows software package. The software is sold separately. Reference this page for specific pitch contactpoints.
Model No. Description Range Unit PricePD-8001 External ball pitch diameter gage 0" to 6"
PD-8002 External ball pitch diameter gage 6" to 12"
PD-8004 External ball pitch diameter gage 12" to 16"
PD-8006 External ball pitch diameter gage 16" to 20"
PD-8008 External ball pitch diameter gage 20" to 24"
PD-8010 External ball pitch diameter gage 24" to 28"
PD-8012 External ball pitch diameter gage 28" to 36"
PD-8013 External ball pitch diameter gage 36" to 44"
PD-8014 External ball pitch diameter gage 44" to 52"
PD-8015 External ball pitch diameter gage 52" to 60"
PD-8016 External ball pitch diameter gage 60" to 72"
Gagemakers standard ball contact points are manufactured with spherical chrome contact balls. Standardcontact diameters are held to tolerances of .00005. "SP" contact points fit "SPA" contact point arms only.Contact sizes are matched closely to thread inspection wire sizes. These contact sizes are used in theTDWIN Thread Disk for Windows software program.
SP-105 5 pitch SP-105T 5 pitch
SP-096 6 - 7 pitch SP-090T 6 pitchSP-072 8 - 9 pitch SP-062T 8 pitch
SP-057 10 pitch SP-050T 10 pitch
SP-050 11.5 - 12 pitch SP-041T 12 - 14 pitch
SP-041 13 -16 pitch SP-032T 16 pitch
SP-032 18 - 20 pitch
PITCH DIAMETER CONTACT POINT ARMS (For gages on page 13)
"SPA" contact point arms hold "SP" contact points for internal and external pitch diameter measurements.
INTERNAL AND EXTERNAL
Model No. Description Price/Set
SPA-265 .265" dia., 1" long
SPA-375 .375" dia., 1.25" long
SPA-437 .437" dia., 1.50" long
PITCH DIAMETER CONTACT POINTS (For gages on page 13)
UN, INTERNAL AND EXTERNAL
Model No. Description Unit Price
INTERNAL AND EXTERNAL METRIC
Model No. Thread Pitch Unit Price
SP-105 4.5 - 4.75mm pitch
SP-096 4 - 4.25mm pitch
SP-072 3.5 - 3mm pitch
SP-057 2.5mm pitch
SP-041 1.5 - 2mm pitch
SP-032 1 - 1.25mm pitch
Model No. Description Unit Price
ACME/STUB ACME
HOW TO ORDER
1. Select the SP6-6000 (internalthreads) or SRG-7000 (externalthreads) series gage modelbased on the range of
diameters being measured.2. Select the thread contact point
size, based on the thread form(not included in price of gage).Specify the pitch.
PD-8001
CONTACT POINT ARMS(Points not included in price of arms)
PD-8013
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
14/32
14
INTERNAL PITCH DIAMETER INSPECTION GAGES(1 " TO 24" DIAMETERS)
The ball pitch diameter gages or "NO GO" gages indicate the pitch diameter size of the products internalthread. The gages are adjustable within a size range and use interchangeable thread rolls and contactballs to measure different pitch threads.
Model No. Description Range Unit Price
PD-5104 Internal pi tch diameter gage ("V" threads only) 1" to 9"
PD-6000 Internal pitch diameter gage ("V" & ACME) 1" to 9"
PD-6000-07 Replacement arm set 4" length
PD-6001 Internal pitch diameter gage 6" to 24"
PD-6001-24E Internal pitch diameter gage extension rod 24"
PD-6001-36E Intemal pitch diameter gage extension rod 36"
DB-1800 Internal deep reach bore gage 18" reach min. bore travel 1.700"
DB-2400 Internal deep reach bore gage 24" reach min. bore travel 1.700"
CONTACT POINTSGagemaker's standard ball contact points are manufactured with spherical chrome contact balls.Threaded shanks are #4-48 UNF. Contact sizes are matched closely to thread inspection wire sizes.The contact diameters listed are used in the TDWIN Thread Disk for Windows software program forpitch diameter inspection.
UN SERIES(60 V) THREADS
T562 1
T288 2
T188/T188C 3
T188/T188C 3.5
T144/T144C 4
T128/T128C 4.5
T115/T115C 5
T105/T105C 5.5
T096/T096C 6
T072/T072C 8
T057/T057C 10
T050/T050C 11.5
T050/T050C 12
T041/T041C 14
T041/T041C 16
T032/T032C 18
ACME OR STUB ACME THREADS
T531T 1
T344T 1.5
T266T 2
T219T 2.5
T188T/T188TC 3
T144T/T144TC 3.5
T128T/T128TC 4
Model No. Thread Pitch Chrome Price Carbide PriceChrome/Carbide (each) (each)
T105T / T105TC 5
T090T / T090TC 6,7
T062T / T062TC 8
T050T / T050TC 10
T041T / T041TC 12
T041T / T041TC 14
T032T / T032TC 16
Model No. Thread Pitch Chrome Price Carbide PriceChrome/Carbide (each) (each)
Model No. Thread Pitch Chrome Price Carbide PriceChrome/Carbide (each) (each)
Model No. Thread Pitch Chrome Price Carbide PriceChrome/Carbide (each) (each)
MODEL NO. DESCRIPTION LENGTH UNIT PRICE
PD-6001 Replacement Parts (Extensions have #10-32 threads.)
PD-6001-PD4C Cap - CDI Indicator
PD-6001-PD4M Cap - Mitutoyo Indicator
PD-6001-PD3 Adjustment cap lock nut
PD-6001-PD2 Adjustment cap
PD-6001-PD1 Contact point adapter
PD-6001-PDA Extension rod .430"
PD-6001-PDB Extension rod .860"
PD-6001-PDC Extension rod 1.290"
PD-6001-PDD Extension rod 1.720"
PD-6001-PDE Extension rod 3.440"
PD-6001-PDF Extension rod 5.590"
PD-6001-PDG Extension rod 7.740"
PD-6001-PDH Extension rod 10.320"
PD-6000
PD-5104
DB-1800
PD-6001
CONTACT POINTS
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
15/32
Prices subject to change without notice 1/04
LG-5003
THREADLEAD GAGESTANDARD
TH-3001PD
TH-3009PD
THREADPROFILES
BX-1000
EXTENSION RODS
BXG-1000
THREAD LEAD GAGE
The Gagemaker lead gage inspects both internal and external thread leads. The three point lead gageprovides a stable base and requires no sweeping. When used as a two point gage, lead accuracy ischecked with a side to side sweeping motion.
LG-5002 2Pt. Lead gage " - 4" Thread leadsLG-5003 3Pt. Lead gage " - 4" Thread leads
LEAD GAGE SETTING STANDARDS
Gagemakers precision lead gage setting standards are manufactured in accordance with ANSIspecification. Lead gage standards are used to preset the location of the lead gage contact point prior to theinspection of the threaded part.
STD-5001 Lead standard 1 - 5 pitch / 4" length max.
STD-5002 Lead standard 6 - 18 pitch / 4" length max.
STD-5003 Lead standard 1 - 5 pitch / 1 length max.
STD-5004 Lead standard 6 - 18 pitch / 1" length max.
STD-5005 Lead standard Odd pitch / 4" length max.
THREAD HEIGHT GAGES
Gagemaker manufactures precision thread height gages.
TH-3001PD External thread depth gage, UN, ACME,Stub ACME (.196 travel)
TH-3009PD Internal thread depth gage, UN, ACME,Stub ACME (.250 travel)
THREAD PROFILE GAGES
Gagemaker manufactures precision thread profile gages for the quick identification of product threadforms.Specify the pitch of the thread to be inspected when ordering. Special form profiles are available and arequoted upon request.
TP-UNI-XXP Internal UN series thread profile gage
TP-UNE-XXP External UN series thread profile gage
TP-GPA-XXP Internal/external general purpose ACME thread profile gage
TP-SA-XXP Internal/external Stub ACME thread profile gage
TP-MI-XXP Internal ISO Metric series thread profile gage
TP-ME-XXP External ISO Metric series thread profi le gage
Overlays for above profile gages
FACE GROOVE AND HOLE LOCATION GAGESGagemakers face groove gages inspect groove diameters and groove widths. Excellent for hole locationinspections.
BX-1000 Groove diameter gage Grooves diameters to 13"
BXG-1000 Groove width gage Groove widths, .376" - 1.5"
BXG-1002 Groove width gage Groove widths, 2.0"
BX-R13 Optional extension rod for BX-1000, 13" Groove diameters to 13"
BX-R24 Optional extension rod for BX-1000, 24" Groove diameters to 25"
BX-R30 Optional extension rod for BX-1000, 30" Groove diameters to 31"
BX-R36 Optional extension rod for BX-1000, 36" Groove diameters to 37"
Model No. Description Range Unit Price
Model No. Description Range Unit Price
Model No. Description Unit Price
Model No. Description Unit Price
Model No. Description Unit Price
LG-5002
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
16/32
16
API andPremium
Gages
Gagemaker's line of API products includes gagesrequired by API for inspection of threaded tubulargoods. Our products include: pitch diameter gages,lead gages, taper gages, thread height gages, flange
groove gages, and setting standards. We also offer APIindustry related products that include additionalelement gages designed for specific customerrequirements. These gages have been used in theOCTG industry since 1980 and are seen in mostfacilities that manufacture or inspect oilfield products.
Our premium gages are used to inspect non-industrystandard connections designed by proprietarythreaders. Many of our premium connection gageshave been adopted as the industry standard by thesethreaders. The MRP gage is approved for API's newSR-22 connection.
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
17/32
Prices subject to change without notice 1/04
GAGE SETTING MASTERS
MIC TRAC ELECTRONIC ADJUSTABLE SETTING MASTER
The MIC TRAC setting master is a multi-function gauging unit that sets and calibrates most gages. The unitutilizes replaceable setting blocks for the particular taper connection being inspected. One set of
taper blocks covers all connections that have that taper. The base unit adjusts the blocks topredetermined locations for setting the MRP pitch diameter gages. Calculated setting dimensions for allstandard API connections are provided with the MIC TRAC. (MT CPU is CE approved.)
MODEL NO. DESCRIPTION RANGE UNIT PRICE
MT-3012-50 MIC TRAC Base Unit w/ TF-1F Blocks 0" to12" Internal1" to 13" External
MT-3024-50 MIC TRAC Base Unit w/ TF-1F Blocks 0" to 24" Internal1" to 25" External
MT-3036-50 MIC TRAC Base Unit w/ TF-1F Blocks 0" to 36" Internal1" to 37" External
PRN-100 Electronic Printer Optional
PRN-000 Replacement Printer Paper Optional
MIC TRAC SETTING BLOCKSThe MIC TRAC setting blocks are replaceable anvils that have an accurate taper ground into the gaugingsurfaces. The setting blocks are supplied in sets of 2 and mount on the MIC TRAC receiver blocks.
MODEL NO. DESCRIPTION UNIT PRICE
TF-1F Flat Face Setting Blocks, No taper (suppl ied with MIC TRAC)
TF-STR Straight Blocks
TF-.75T 3/4" Taper Blocks, 8 & 10 Round, 3/4" TPF Buttress, Line Pipe
TF-1.0T 1" Taper Blocks, 1" TPF Buttress
TF-1.12T 1 1/8" Taper Blocks, 1.125 TPF Connectors
TF-1.25T 1 1/4" Taper Blocks, 1.25 TPF Connectors
TF-1.25RSC 1 1/4" Taper Blocks, 1.25 TPF Rotary Shouldered Connectors
TF-1.75T 1 3/4" Taper Blocks, 1.75 TPF Connectors
TF-2.0T 2" Taper Blocks, 2.0 TPF Connectors
TF-2.0RSC 2" Taper Blocks, 2.0 TPF Rotary Shouldered Connectors
TF-3.0T 3" Taper Blocks, 3.0 TPF Connectors
TF-3.0RSC 3" Taper Blocks, 3.0 TPF Rotary Shouldered Connectors
Special Taper Blocks
RISER BLOCKS FOR THE TAPER BLOCKS ABOVE
TF-RISER1 1.00" Riser Block (Set of 2)
TF-RISER2 2.00" Riser Block (Set of 2)
TF -RISER3 3.00" Riser Block (Set of 2)
SPECIAL FLANGE GROOVE SETTING BLOCKS
TF-BX 23 BXR Ring Groove Diameter / Width Sett ing Blocks
TF-1F-T Flat face setting blocks to accept r iser block (T-Shape)
MT-3012-50
MT-CPU
PRN-100
PRN-000
TF-1F
TAPER BLOCKS
TF-RISERS
TF-BX
TF-1F-T
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
18/32
18
This MRP series of pitch diameter gages detects variations in pitch diameter by the use of a gage shoethat rests on the crest of the threads. Variation in diameter is detected by the indicator readout. Thesegages must be set to nominal size with one of a variety of setting options offered. Refer to the settingoption section that follows. Gage accuracy is .001" throughout the range of measurement.
MRP PITCH DIAMETER AND OVALITY GAGES
MRP-10BL MRP 1000 Block Set
MRP-10UA MRP-1000 Upper Arm
MRP-10LA MRP-1000 Lower Arm
MRP-10SLA MRP-1000 Special Arm 1" longer
MRP-20BL MRP-2000 Block Set
MRP-20LB-1 MRP-2000 Lower Block w/ 1" Hole
MRP-21UA MRP-2001 Upper Arm
MRP-21LA MRP-2001 Lower Arm
MRP-21UA-7 MRP-2001 7" Upper Arm
MRP-21LA-7 MRP-2001 7" Lower Arm
MRP-21UA-10 MRP-2001 10" Upper Arm
MRP-21LA-10 MRP-2001 10" Lower Arm
MRP-.625I Internal Thread Shoe, 5/8" long
MRP-.625E External Thread Shoe, 5/8" long
MRP-10WP MRP-1000 Wear Pad Set
MRP-10SP MRP-1000 Spring Plunger
MRP-30RS-18 MRP-3000 Rail Set, 18" Max.
MRP REPLACEMENT PARTSThese are some of the most commonly requested replacement parts for the MRP gages. ContactGagemaker for pricing of parts not listed.
MODEL NO. DESCRIPTION UNITPRICE
MRP-22UA MRP-2002 Upper Arm
MRP-22LA MRP-2002 Lower Arm
MRP-22UA-7 MRP-2002-7 Upper Arm
MRP-22LA-7 MRP-2002-7 Lower Arm
MRP-22UA-10 MRP-2002-10 Upper Arm
MRP-22LA-10 MRP-2002-10 Lower Arm
MRP-20WP MRP-2000, 3000 Wear Pad Set
MRP-RAIL-12 MRP-2000 12" Cross Rail
MRP-RAIL-18 MRP-2000 18" Cross Rail
MRP-RAIL-24 MRP-2000 24" Cross Rail
MRP-10KB-S MRP-1000 Knob - Short
MRP-10KB-L MRP-1000 Knob - Long
MRP-20KB MRP-2000 Knob
MRP-.875 Thread Shoe, 7/8" long
MRP-1.00 Thread Shoe, 1.00" long
MRP-20WPEX MRP-2000 Extended Wear Pad Set
MRP-20SP MRP-2000 Spring Plunger
MRP-30RS-24 MRP-3000 Rail Set, 24" Max.
MODEL NO. DESCRIPTION UNITPRICE
MODEL NO. DESCRIPTION RANGE UNIT PRICEMRP-1000 Internal / External PD Gage Internal 1" - 4"
External 1" - 4"
MRP-1500 Internal / External PD Gage Internal 1" - 4"External 1" - 4"
MRP-2001 External PD Gage, w/ 4" reach
MRP-2001-7 External PD Gage w/ 7" reach 2 3/8" - 20"
MRP-2001-10 External PD Gage w/ 10" reach
MRP-2511 External PD Gage, w/ 4" reach 4 1/2" - 9 5/8"
MRP-2521 External PD Gage, w/ 4" reach 4 1/2" - 13 3/8"
MRP-2512 Internal PD Gage, w/ 3 3/8" reach 4 1/2" - 9 5/8"
MRP-2522 Internal PD Gage, w/ 3 3/8" reach 4 1/2" - 13 3/8"
MRP-2513 Internal / External PD Gage w/ 3 3/8" reach 4 1/2" - 9 5/8"
MRP-2523 Internal / External PD Gage w/ 3 3/8" reach 4 1/2" - 13 3/8"
MRP-3001 External PD Gage w/ 3 3/8" reach 8 5/8" - 24"
MRP-3002 Internal PD Gage w/ 3 3/8" reach 8 5/8" - 24"
MRP-3003 Internal/External PD Gage w/ 3 3/8" reach Internal 8 5/8" - 24"External 8 5/8" - 24"
MRP-3004 Internal/External PD Gage w/ 20"-36" reach Internal 8 5/8" - 24"External 8 5/8" - 24"
MRP-3501 External PD Gage w/ 6 1/4" reach 8 5/8" - 24"
MRP-3502 Internal PD Gage w/ 6 1/4" reach 8 5/8" - 24"
MRP-3503 Internal/External PD Gage w/ 6 1/4" reach Internal 8 5/8" - 24"External 8 5/8" - 24"
MRP-1000
MRP-2001
MRP-2511
MRP-1500
MRP-20BL
MRP-10BL
WEAR PADS
MRP-1
0UA
MRP-2
2UA
MRP-22LA
MRP-21
UA
MRP-21L
A
MRP-RAILS
MRP-2
2UA-7 MR
P-22L
A-7
MRP-SHOES
MRP-10KB
MRP-20KB
U.S. Patent No.4,524,524
MRP-1
0LA
MRP-2002 Internal PD Gage, w/ 4" reach
MRP-2002-7 Internal PD Gage, w/ 7" reach 2 3/8" - 20"
MRP-2002-10 Internal PD Gage w/ 10" reach
Internal 2 3/8" - 20"
External 2 3/8" - 20"
MRP-2003 Internal / External PD Gage w/ 4" reach
MRP-2003-7 Internal / External PD Gage w/ 7" reach
MRP-2003-10 Internal / External PD Gage w/10" reach
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
19/32
Prices subject to change without notice 1/04
MRP PINEXTERNALROD STANDARD
MRP BOXINTERNALROD STANDARD
All Specials Non-Standard API or Premium Connection Setting Standards
GAGE SETTING MASTERS
PIN BOXCONNECTION STANDARD STANDARD
UNIT PRICE UNIT PRICE
Rod style setting standards are designed for API threaded connections. Each set of standards consists oftwo precision ground rods that are ground to lengths in accordance with API Spec 5B. The rod sets are
securely attached together and labeled with the connection size and serial number. The rods set the axiallocation of the thread shoe and the distance between shoes for accurate inspection of threadedconnectors.
8R STC - 4 1/2"-9.50#
8R STC - 4 1/2"-Other
8R STC - 5" - 11.50#
8R STC - 5" - Other
8R STC - 5 1/2"
8R STC - 6 5/8"
8R STC - 7" - 17.00#
8R STC - 7" - Other
8R STC - 7 5/8"
8R STC - 8 5/8"-24.00#
8R LTC - 4 1/2"
8R LTC - 5"
8R LTC - 5 1/2"
8R LTC - 6 5/8"
8R LTC - 7"
BUTTRESS - 4 1/2"
BUTTRESS - 5"
BUTTRESS - 5 1/2"
BUTTRESS - 6 5/8"
BUTTRESS - 7"
BUTTRESS - 7 5/8"
BUTTRESS - 8 5/8"
8R LTC - 7 5/8"
8R LTC - 8 5/8"
8R LTC - 9 5/8"
8R LTC - 20"
BUTTRESS - 9 5/8"
BUTTRESS - 10 3/4"
BUTTRESS - 11 3/4"
BUTTRESS - 13 3/8"
BUTTRESS - 16"
BUTTRESS - 18 5/8"
BUTTRESS - 20"
8R STC - 8 5/8"-Other
8R STC - 9 5/8"
8R STC - 10 3/4"-32.75#
8R STC - 10 3/4"-Other
8R STC - 11 3/4"
8R STC - 13 3/8"
8R STC - 16"
8R STC - 18 5/8"
8R STC - 20"
NUE & EUE - 2 3/8"
NUE & EUE - 2 7/8"
NUE & EUE - 3 1/2"
NUE & EUE - 4"
NUE & EUE - 4 1/2"
ROD STYLE SETTING STANDARDS FOR MRP-1000, 1500, 2000, 2500, 3000, and 3500
PIN BOXCONNECTION STANDARD STANDARD
UNIT PRICE UNIT PRICE
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
20/32
20
4 1/2 J/K 55 SR22-4 -P J/K 55 SR22-4 -B J/K 55
4 1/2 L/N 80 SR22-4 -P L/N 80 SR22-4 -P L/N 804 1/2 C90/T95/P110
SR22-4 -P SR224 -BC90/T95/P110 /C90/T95/P110
5 J/K 55 SR22-5-P J/K 55 SR22-5-B J/K 55
5 L/N 80 SR22-5-P L/N 80 SR22-5-P L/N 80
5 C90 SR22-5-P C90 SR22-5-P C90
5 C/T 95, P100 SR22-5-P C/T 95, P100 SR22-5-P C/T 95, P100
5 J/K 55 SR22-5 -P J/K 55 SR22-5 -B J/K 55
5 L/N 80 SR22-5 -P L/N 80 SR22-5 -B L/N 80
5 C90 SR22-5 -P C90 SR22-5 -B C90
5 C/T 95 SR22-5 -P C/T 95 SR22-5 -B C/T 95
5 P110 SR22-5 -P P110 SR22-5 -B P110
6 5/8 J/K 55 SR22-6 5/8-P J/K 55 SR22-6 5/8-B J/K 55
6 5/8 L/N 80, C90 SR22-6 5/8-P SR22-6 5/8-B L/N 80,L/N 80, C90 C90
6 5/8 C/T 95 SR22-6 5/8-P C/T 95 SR22-6 5/8-B C/T 95
6 5/8 P110 SR22-6 5/8-P P110 SR22-6 5/8-B P110
7 J/K 55 SR22-7-P J/K 55 SR22-7-B J/K 55
7 L/N 80 SR22-7-P L/N 80 SR22-7-B L/N 80
7 C90, C/T 95 SR22-7-P C90, C/T 95 SR22-7-B C90, C/T 95
7 P110 SR22-7-P P110 SR22-7-B P110
7 5/8 J/K 55 SR22-7 5/8-P J/K 55 SR22-7 5/8-B J/K 55
7 5/8 L/N 80 SR22-7 5/8-P L/N 80 SR22-7 5/8-B L/N 80
7 5/8 C90, C/T 95SR22-7 5/8-P SR22-7 5/8-BC90, C/T 95 C90, C/T 95
7 5/8 P110 SR22-7 5/8-P P110 SR22-7 5/8-B P110
8 5/8 J/K 55 SR22-8 5/8-P J/K 55 SR22-8 5/8-B J/K 558 5/8 L/N 80 SR22-8 5/8-P L/N 80 SR22-8 5/8-B L/N 80
8 5/8 C90 SR22-8 5/8-P C90 SR22-8 5/8-B C90
8 5/8 C/T 95 SR22-8 5/8-P C/T 95 SR22-8 5/8-B C/T 95
8 5/8 P110 SR22-8 5/8-P P110 SR22-8 5/8-B P110
9 5/8 J/K 55 SR22-9 5/8-P J/K 55 SR22-9 5/8-B J/K 55
9 5/8 L/N 80 SR22-9 5/8-P L/N 80 SR22-9 5/8-B L/N 80
9 5/8 C90 SR22 9 5/8-P C90 SR22-9 5/8-B C90
9 5/8 C/T 95 SR22-9 5/8-P C/T 95 SR22-9 5/8-B C/T 95
9 5/8 P110 SR22-9 5/8-P P110 SR22-9 5/8-B P110
GAGE SETTING MASTERS
The rod style setting standards are designed to preset all models of the MRP Series gages for accurateinspection of API threaded connections. These standards consist of two precision rods that are
ground to lengths in accordance with API. The larger rod sets the distance between the thread shoeson the MRP gages. The smaller rod sets the axial location of the thread shoe on the MRP gages. The rodsets are securely attached together and labeled with the API connection size and serial number.
ROD STYLE SETTING STANDARDS FOR MRP-1000, 1500, 2000, 2500, 3000, and 3500
HOW TO ORDER
1. Select the rod style standardmodel, based on the size andtype of connectors beingmeasured.
Sets the distance between thethread shoes on the MRP gages
Rod Style Setting Standard
External
Internal
Approved for SR22
SR22 L8, E8 and MRP StandardsGagemaker
Designation Pin & CouplingSetting Standards
Size Grade
GagemakerPinrod
Setting StandardModel Number
GagemakerCoupling rod
Setting StandardModel Number
StandardUnit Price
StandardUnit Price
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
21/32
Prices subject to change without notice 1/04
The product threadform determines the thread roll set that will be used. Thread roll sets consist of 2 rollssupplied in a labeled storage tube.
MRP-5000 and MRP-5500FUNCTIONAL ROLL GAGES FOR TAPERED THREADS
The MRP-5000 series of thread pitch diameter gages use hardened and ground thread rolls to inspectfunctional size of tapered threaded connectors. The MRP-5000 gages are adjustable within a size rangeand have interchangeable thread rolls for inspection of all API threadforms. The gages must be preset to
size using one of a variety of setting methods available. Refer to the setting options that follow.Thread rolls sold separately.
MRP-5001 Internal/External Tubing and Casing 2 3/8" - 5 1/2"connectors, Internal Tool Joints
MRP-5002 Internal/External Tubing and Casing 2 3/8" - 13 3/8"connectors, Internal Tool Joints
MRP-5003 Internal/External Tubing and Casing 13 3/8" - 20"connectors, Internal Tool Joints
MRP-5501 External Tool Joints 2 3/8" - 4 1/2"
MRP-5502 External Tool Joints 4 1/2" - 8 5/8"
MODEL NO. DESCRIPTION RANGE UNIT PRICE
MRP-5000 and MRP-5500 THREAD ROLLS
Replacement Parts
*Taper yoke price does not include thread rolls. To determine thethread rolls required, refer to MRP-5000 thread roll chart above.
MRP5-10 Posi tioning Springs (Set of 2)
MRP5-11 Retainer Washers (Set of 2)
MRP5-12 Lock Screw (Set of 2)
MRP5-75T " TPF Taper Arms (Set of 2)
MRP5-10T 1" TPF Taper Arms (Set of 2)
MRP5-125T 1" TPF Taper Arms (Set of 2)
MRP5-20T 2" TPF Taper Arms (Set of 2)
MRP5-30T 3" TPF Taper Arms (Set of 2)
MRP55-125T 1" TPF Yoke*
MRP55-15T 1" TPF Yoke*
MRP55-20T 2" TPF Yoke*
MRP55-30T 3" TPF Yoke *
MODEL NO. DESCRIPTION UNITPRICE
MODEL NO. DESCRIPTION UNITPRICE
MRP-5000 MRP-5500
TR-8R All API 8 Round Tubing
TR-10R All API 10 Round Tubing
TR-8LP 8V API Line Pipe, American Std. NPT
TR-11LP 11 1/2 V API Line Pipe, American Std. NPT
TR-B75I API Buttress Casing, Internal, 4 1/2" - 13 3/8"
TR-B75E API Buttress Casing, External, 4 1/2" - 13 3/8"
TR-B10I API Butt ress Casing, Internal, 16" - 20"
TR-B10E API Buttress Casing, External, 16" - 20"
TR-415 P.A.C. Connections, 2 3/8" - 3 1/2"2 3/8" - 4 1/2" American Open Hole
TR-4238 4" API Full Hole API Numbered Connections #23 - #502 7/8" - 5" Hughes Xtra Hole 5 1/2" & 6 5/8" API Full Hole2 3/8" - 4 1/2" Hughes Slim Hole 6 5/8" API REG2 3/8" - 5 1/2" API INT Flush
TR-4338 API Numbered Connections #56 - #77 5 1/2", 7 5/8", & 8 5/8" API REG
TR-5340 2 3/8" - 4 1/2" API REG 3 1/2" - 4 1/2" API Full Hole
TR-61555 API Numbered Connections #10, #12, #13, #16M.T. (Macaroni Tubing)
TR-352H9 3 1/2" - 6 5/8" Hughes H-90
TR-353H9 7" - 8 5/8" Hughes H-90
TR-312H9 2 3/8" - 3 1/2" Hughes Slim Line
MODEL NO. CONNECTION UNIT PRICE
MRP-5500
MRP-5001
MRP-5001ON PART
MRP-5501
MRP-5501ON PART
THREAD ROLLS
MRP-5000
U.S. Patent No.5,182,862
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
22/32
22
HOW TO ORDER
1. Select the round or frame style standard model, based on the size and type of
connectors being measured.
Frame standards set thedistance between the thread
shoes on the MRP gages
Round standards set thedistance between the thread
shoes on the MRP gages
Setting Standards
Frame Style
Round Style
FRAME AND ROUND STYLE SETTINGS STANDARDSETTING STANDARDS FOR MRP-1000, 1500, 2000, 2500, 3000, and 3500
The round and frame style setting standards are designed to preset all models of the MRP Series gagesfor accurate inspection of API threaded connections. These standards consist of a rigid, non-adjustablesteel block precision machined to proper size to tolerances of +.0003.
FRAME STYLE SETTING STANDARDS
4 NUE & EUE FSTD-412NE-P FSTD-412NE-B4 Buttress FSTD-412B-P FSTD-412B-B5 Buttress FSTD-5B-P FSTD-5B-B
5 Buttress FSTD-512B-P FSTD-512B-B6 5/8 Buttress FSTD-658B-P FSTD-658B-B
7 Buttress FSTD-7B-P FSTD-7B-B7 5/8 Buttress FSTD-758B-P FSTD-758B-B8 5/8 Buttress FSTD-858B-P FSTD-858B-B9 5/8 Buttress FSTD-958B-P FSTD-958B-B10 Buttress FSTD-1034B-P FSTD-1034B-B11 Buttress FSTD-1134B-P FSTD-1134B-B
13 3/8 Buttress FSTD-1338B-P FSTD-1338B-B16 Buttress FSTD-16B-P FSTD-16B-B
18 5/8 Buttress FSTD-1858B-P FSTD-1858B-B20 Buttress FSTD-20B-P FSTD-20B-B4 8R LTC FSTD-412L-P FSTD-412L-B5 8R LTC FSTD-5L-P FSTD-5L-B
5 8R LTC FSTD-512L-P FSTD-512L-B6 5/8 8R LTC FSTD-658L-P FSTD-658L-B
7 8R LTC FSTD-7L-P FSTD-7L-B7 5/8 8R LTC FSTD-758L-P FSTD-758L-B8 5/8 8R LTC FSTD-858L-P FSTD-858L-B9 5/8 8R LTC FSTD-958L-P FSTD-958L-B20 8R LTC FSTD-20L-P FSTD-20L-B
4 - 9.50# 8R STC FSTD-412S-9-P FSTD-412S-9-B4 - Other 8R STC FSTD-412S-O-P FSTD-412S-O-B5 - 11.50# 8R STC FSTD-5S-11-P FSTD-5S-11-B5 - Other 8R STC FSTD-5S-O-P FSTD-5S-O-B
5 8R STC FSTD-512S-P FSTD-512S-B6 5/8 8R STC FSTD-658S-P FSTD-658S-B
7 - 17.00# 8R STC FSTD-7S-17-P FSTD-7S-17-B7 - Other 8R STC FSTD-7S-O-P FSTD-7S-O-B
7 5/8 8R STC FSTD-758S-P FSTD-758S-B8 5/8 - 24.00# 8R STC FSTD-858S-24-P FSTD-858S-24-B8 5/8 - Other 8R STC FSTD-858S-O-P FSTD-858S-O-B
9 5/8 8R STC FSTD-958S-P FSTD-958S-B10 - 32.75# 8R STC FSTD-1034S-32-P FSTD-1034S-32-B10 - Other 8R STC FSTD-1034S-O-P FSTD-1034S-O-B
11 8R STC FSTD-1134S-P FSTD-1134S-B13 3/8 8R STC FSTD-1338S-P FSTD-1338S-B
16 8R STC FSTD-16S-P FSTD-16S-B18 5/8 8R STC FSTD-1858S-P FSTD-1858S-B
20 8R STC FSTD-20S-P FSTD-20S-BAll Special Orders, Non-Standard API or Premium Connection Setting Standards
Connection Pin Standard Pin Std Box Standard Box StdModel Number Unit Price Model Number Unit Price
NUE & EUE
Buttress
LTC
STC
ROUND STYLE SETTING STANDARDS (Cont'd on page 23)
2 3/8 NUE & EUE RSTD-238NE-P RSTD-238NE-B2 7/8 NUE & EUE RSTD-278NE-P RSTD-278NE-B3 NUE & EUE RSTD-312NE-P RSTD-312NE-B4 NUE & EUE RSTD-4NE-P RSTD-4NE-B
4 NUE & EUE RSTD-412NE-P RSTD-412NE5 NUE & EUE RSTD-5NE-P RSTD-5NE-B
5 NUE & EUE RSTD-512NE-P RSTD-512NE-B6 5/8 NUE & EUE RSTD-658NE-P RSTD-658NE-B
7 NUE & EUE RSTD-7NE-P RSTD-7NE-B2 3/8 Buttress RSTD-238B-P RSTD-238B-B2 7/8 Buttress RSTD-278B-P RSTD-278B-B3 Buttress RSTD-312B-P RSTD-312B-B4 Buttress RSTD-4B-P RSTD-4B-B
4 Buttress RSTD-412B-P RSTD-412B-B5 Buttress RSTD-5B-P RSTD-5B-B
5 Buttress RSTD-512B-P RSTD-512B-B6 5/8 Buttress RSTD-658B-P RSTD-658B-B
ConnectionPin Standard Pin Std Box Standard Box Std
Model Number Unit Price Model Number Unit PriceNUE & EUE
Buttress
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
23/32
Prices subject to change without notice 1/04
HOW TO ORDER
1. Select the LG-5003 gagemodel.
2. Select the proper contactpoints for the application,based on the type ofconnection and pitch/TPI.
3. Select the lead gage settingstandard, based on the typeof connection, taper andthreads per inch (notincluded in the price of the
gage).
LG-5003Lead Gage
LS-1000Lead Gage
Setting Standard
Inspects Thread Lead
LEAD GAGES
MODEL NO. CONNECTION DATA CROSS REFERENCE UNIT PRICE
The Gagemaker lead gages inspects both internal and external thread leads.
LG-5002 Lead Gage 2point " - 4" Thread Length
LG-5003 Lead Gage 3point " - 4" Thread Length
MODEL NO. DESCRIPTION RANGE UNIT PRICE
LEAD GAGE SETTING STANDARDSGagemakers precision lead gage setting standards are manufactured in accordance with API Spec5B. Lead gage standards are used to preset the lead gages contact point location prior to theinspection of the threaded connector.
1001 " TPF, 8 & 10 TPI 5691-A
1002 Straight, 8 & 10 TPI 5691-C
1003 " TPF, 11 TPI 5691-D
1004 Straight, 11 TPI 5691-F
1005 " TPF, 5 TPI 5691-K
1006 1" TPF, 5 TPI 5691-K16
1007 2" TPF, 4 TPI 5691-L
1008 3" TPF, 4 TPI 5691-M1009 3" TPF, 5 TPI 5691-N
1010 1" TPF, 4 TPI 5691-T3
1011 2" TPF, 3 TPI 5691-P4A
1012 3" TPF, 3 TPI 5691-P4B
1013 1" TPF, 3 TPI 5691-P4C
1027 1 1/8" TPF, 5 TPI N/A
1032 1 1/8" TPF, 6 TPI N/A
LG-5002Lead Gage
7 Buttress RSTD-7B-P RSTD-7B-B2 3/8 8R LTC RSTD-238L-P RSTD-238L-B2 7/8 8R LTC RSTD-278L-P RSTD-278L-B
3 8R LTC RSTD-312L-P RSTD-312L-B4 8R LTC RSTD-4L-P RSTD-4L-B
4 8R LTC RSTD-412L-P RSTD-412L-B5 8R LTC RSTD-5L-P RSTD-5L-B
5 8R LTC RSTD-512L-P RSTD-512L-B6 5/8 8R LTC RSTD-658L-P RSTD-658L-B
7 8R LTC RSTD-7L-P RSTD-7L-B2 3/8 8R STC RSTD-238S-P RSTD-238S-B2 7/8 8R STC RSTD-278S-P RSTD-278S-B3 8R STC RSTD-312S-P RSTD-312S-B4 8R STC RSTD-4S-P RSTD-4S-B
4 - 9.50# 8R STC RSTD-412S-9-P RSTD-412S-9-B4 - Other 8R STC RSTD-412S-O-P RSTD-412S-O-B5 - 11.50# 8R STC RSTD-5S-11-P RSTD-5S-11-B5 - Other 8R STC RSTD-5S-O-P RSTD-5S-O-B
5 8R STC RSTD-512S-P RSTD-512S-B6 5/8 8R STC RSTD-658S-P RSTD-658S-B
7 - 17.00# 8R STC RSTD-7S-17-P RSTD-7S-17-B7 - Other 8R STC RSTD-7S-O-P RSTD-7S-O-B
NC23 NC77 RSC#-P RSC#-BAll Special Orders, Non-Standard API or Premium Connection Setting Standards
ROUND STYLE SETTING STANDARDS (Cont'd)
Connection Pin Standard Pin Std Box Standard Box StdModel Number Unit Price Model Number Unit Price
Butress
LTC
STC
RSC
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
24/32
24
MODEL NO. DESCRIPTION LENGTH UNIT PRICE
INTERNAL TAPER GAGES
MODEL NO. DESCRIPTION CROSS REF NO. RANGE UNIT PRICE
EXTERNAL TAPER GAGES
Gagemakers external taper gages inspect variation in connection taper. External taper gages are shippedwith .072" diameter contact points as standard. Refer to the contact point chart for the proper contactpoint for your particular connection.
Gagemakers internal taper gages measure variation in connection taper. Taper gages are shipped with.072" diameter contact points as standard. Refer to the contact point chart for the proper contact point foryour particular connection.
MODEL NO. DESCRIPTION CROSS RANGE UNIT PRICEREF.
IT-6001 Replacement Parts(Extensions have #10-40 threads)
IT-6001 Internal Taper Gage 5554 Any Depth, 4" - 24" Dia.
IT-6000 Internal Taper Gage 8191 4" Depth, 1" - 9" Dia.
IT-6000-07 Replacement Arm Set N/A 4" Length
IT-5104 Int. Taper & Groove Dia. Gage N/A 4" Depth, 1" - 10" Dia.
IT-5106 Int. Taper & Groove Dia. Gage N/A 6" Depth, 1" - 10" Dia.
IT-5108 Int. Taper & Groove Dia. Gage N/A 8" Depth, 1" - 10" Dia.
IT-5112 Int. Taper & Groove Dia. Gage N/A 12" Depth, 1" - 10" Dia.
IT-5104-04 Replacement Lower Arm N/A 4" Length
IT-5106-06 Replacement Lower Arm N/A 6" Length
IT-5108-08 Replacement Lower Arm N/A 8" Length
IT-5112-12 Replacement Lower Arm N/A 12" Length
IT-6001-01M Cap - Mitutoyo Indicator
IT-6001-01C Cap - CDI Indicator
IT-6001-04 Point Adapter .062"
IT-6001-05 Point Adapter .200"
IT-6001-06 5" Extension .410"
IT-6001-07 5 1/2" Extension .908"
IT-6001-09 6 5/8" Extension 2.030"
IT-6001-10 7" Extension 2.400"
IT-6001-11 7 5/8" Extension 3.026"
IT-6001-12 8 5/8" Extension 4.032"
IT-6001-13 9 5/8" Extension 5.032"
IT-6001-14 10 3/4" Extension 6.154"
IT-6001-15 11 3/4" Extension 7.154"
IT-6001-16 13 3/8" Extension 8.781"
ET-7001 External Taper, 1/2" travel 5637-J 0" - 6"
ET-7002 External Taper, 1/2" travel 5637-D 0" - 10"
ET-7003 External Taper, 1" travel 5637-S 0" - 10"
ET-7004 External Taper, 1/2" travel 5538-J 0" - 16"
ET-7005 External Taper, 1" travel 5538-G 0" - 16"
ET-7006 External Taper, 1/2" travel 5538-U 16" - 24"
ET-7007 External Taper, 1" travel 5538-U 16" - 24"
ET-7002
IT-6001
IT-6000
IT-5112
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
25/32
Prices subject to change without notice 1/04
Gagemaker manufactures many models of thread height gages. Specify the type of thread when ordering.
THREAD HEIGHT GAGE STANDARDS
1014 8 & 10 Round Threads 6780-J
1014S 8 & 10 Round Threads (Crest to Pitchline Shave) N/A
1015 8 & 11 Pitch V Threads 6780-L
1016 8 & 10P Round, 8 & 11 Pitch V Threads 6780-S
1017 13 3/8" & Smaller Buttress, " TPF 1233-A
1018 16" & Larger Buttress, 1" TPF 1233-SB16
10382-RS V.038, 2 TPF Rotary Shouldered Connectors N/A10383-RS V.038, 3 TPF Rotary Shouldered Connectors N/A
10403-RS V-0.040, 3 TPF Rotary Connectors N/A
10502-RS V0.050, 2 TPF Rotary Connectors N/A
10503-RS V-0.050, 3 TPF Rotary Connectors N/A
MODEL NO. DESCRIPTION CROSS REF UNIT PRICENO.
Gagemaker manufactures precision setting standards for presetting thread height gages. Specify the typeof thread when ordering.
TH-3004 Int. Thread Height, 0-25-0, .0005 Line Pipe (T500C) .105 5785-D
TH-3006 lnt. Thread Height, 0-25-0, .0005 8-Round (T502/T503) .105 7705-A
TH-3008 Int. Thread Height, 0-25-0 8-Round (T503/T502) .094 N/A
TH-3009 lnt. Thread Height, 0-25-0 3/4" TPF Buttress (T072) .250 N/A
TH-3010 lnt. Thread Height, 0-25-0 1" Base Length (TPD, T500) .250 NIA
THREAD HEIGHT GAGES
MODEL NO. DESCRIPTION CONNECTION TRAVEL CROSS UNIT(Contact Point) REF NO. PRICE
TH-3002B Ext. Thread Height, 0-25-0 3/4" TPF Buttress (T072) .094 5886-C
TH-3003B Ext. Thread Height, 0-25-0, 1" Buttress .094 5886-B16Step Base (T072)
TH-3002BB Ext. Thread Height Base Only 3/4" TPF Buttress N/A N/A
TH-3003BB Ext. Thread Height Base Only 1" Buttress N/A N/A
TH-3001R Ext. Thread Height, 0-100 8-Round (T501) .162 6709-L
TH-3002R Ext. Thread Height, 0-50-0 8-Round (T501) .162 6709-M
TH-3002RB Ext. Thread Height Base Only 8-Round (T501) N/A N/A
TH-3001S Ext. Thread Shave Gage, 0-100 8-Round (T072) .196 N/A
TH-3001V Ext. Thread Height, 0-100 Line Pipe/Tool Joint .196 5886(T500C)
TH-3002V Ext. Thread Height, 0-50-0 Line Pipe/Tool Joint .196 5886-A(T500C)
TH-3002VB Ext. Thread Height Base Only Line Pipe/Tool Joint N/A N/A
THREAD HEIGHT STANDARDS
TH-3001R
TH-3001V
TH-3001S
TH-3004/TH3006
TH-3008
TH-3009
TH-3010
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
26/32
26
HOW TO ORDER
1. Select the model number forthe contact point, based on thegage. All prices listed are forindividual contact points.
2. Metric and special diametercontact points are available.Call for a quotation.
Ball Contact Points
Contact Point Extensions
Special ApplicationContact Points
T032 / T032C .032" Dia.
T041 / T041C .041" Dia T188 / T188C .188" Dia.T050 / T050C .050" Dia. T200 / T200C .200" Dia.
T057 / T057C .057" Dia. T219 .219" Dia.
T062 / T062C .062" Dia. T235 / T235C .235" Dia.
T072 / T072C .072" Dia. T250 / T250C .250" Dia.
T090 / T090C .090" Dia. T266 .266" Dia.
T096 / T096C .096" Dia. T288 .288" Dia.
T105 / T105C .105" Dia. T344 .344" Dia.
T115 / T115C .115" Dia. T350 .350" Dia.
T125 / T125C .125" Dia. T375 / T375C .375" Dia.
T128 / T128C .128" Dia. T500B / T500CB .500" Dia.
T144 / T144C .144" Dia. T531 .531" Dia.
MODEL NO.
CONTACT POINTS
Gagemakers standard ball contact points are manufactured with spherical chrome contact balls. Boththreaded and straight (non-threaded) shanks are available. All Gagemakers inspection gages usethreaded shank contact points. Threaded shanks are #4-48 UNF. Metric threads are available uponrequest. Most gages require 2 contact points.
STRAIGHT THREADED POINT TPI CONNECTION UNIT PRICESHANK SHANK DIAMETER (each point)
S235 T235 0.235" 3 Hughes Slim Line H-90
S200 T200 0.200" 3 1/2 All Hughes H-90
S144 T144 0.144" 4 API Rotary Shouldered Connections
S128 T128 0.128" 4 1/2 API Rotary Shouldered Connections
S115 T115 0.115" 5 API Rotary Shouldered Connections
S105T T105T 0.105" 5 1/2 Truncated for Extreme Line
S096 T096 0.096" 6 API Rotary Shouldered Connections
S090 T090 0.090" 5 Buttress Casing - Taper
S072 T072 0.072" 8 API Tubing, Casing, and Line Pipe
S062 T062 0.062" 5 Buttress Casing - Lead
S057 T057 0.057" 10 API Tubing and Line Pipe
S050 T050 0.050" 11 1/2 API Line Pipe
S041 T041 0.041" 14 API Line Pipe
S032 T032 0.032" 18 API Line Pipe
S021 T021 0.021" 27 API Line Pipe (CARBIDE)
CONTACT POINTS AND SPECIAL APPLICATION ACCESSORIESGagemaker continually develops new application contacts and indicator accessories. The following itemsare in stock for immediate delivery. These contact points have #4-48 UNF threaded shank. Special diametersavailable, call for quotation.
Model No. Ball Unit Price Unit Price Model No. Ball Unit Price Unit PriceChrome / Carbide Diameter Chrome Carbide Chrome / Carbide Diameter Chrome Carbide
(each point) (each point) (each point) (each point)
Model No. Description Unit Price (each point)
OTHER GENERAL PURPOSE POINTS AND ACCESSORIES
T500C 50 Cone, V -Threads, TH-3001V, TH-3002V, TH-3004
T501 50 Cone, Sel f-centering, TH-3001R, TH-3002R
T502 Self-centering sleeve for use with T501, T503
T503 50 Cone, V-Threads, TH-3006
E-Line .063 R, Extreme Line, TH-3003E
TPD .020 R, Pit Depth Gage, PD-3003, PD-3004
PE-.XXX Point extensions available in .300", .500", .750", 1.00"
PA-45 45 Point adapter
RC-375 .375" Dia. Roller Contact
P-500 TH-3001R, Flat Face Contact
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
27/32
Prices subject to change without notice 1/04
HOW TO ORDER
1. Select the profile gagemodel based on the type ofconnectors beingmeasured.
TP SERIESThread Profile Gages
Thread profile gages quicklyidentify API thread forms
THREAD PROFILE GAGES
MODEL NO.
Gagemaker manufactures precision thread profile gages for the quick identification of product threadforms.Specify the connection which is to be inspected when ordering. Special profiles will be quoted uponrequest.
TP-415 2 3/8" - 3 1/2" P.A.C. Connections 1.5" TPF, 4TPIV-0.076
TP-RTC-8R All API 8R Casing, Tubing & Drill Pipe " TPF, 8 TPI8 Round
TP-RTC-10R All API 10R Tubing " TPF, 10 TPI 10Round
TP-8V 8V API Line Pipe, American Std. NPT " TPF, 8 TPI8 V Thread
TP-11-1/2V 11 V API Line Pipe, American Std. NPT " TPF, 11 T PI11 V Thread
TP-5BTC75-INT API Buttress Casing, Internal, 4 1/2" - 13 3/8" " TPF, 5 TPl
TP-5BTC75-EXT API Buttress Casing, External, 4 1/2" - 13 3/8" " TPF, 5 TPITP-5BTC1-INT API Buttress Casing, Internal, 16" - 20" 1" TPF, 5 TPI
TP-5BTC1-EXT API Buttress Casing, External, 16" - 20" 1" TPF, 5 TPI
TP-453 2 3/8" - 4 1/2" API REG 3" TPF, 5 TPI3 1/2", 4 1/2" API Full Hole V-0.040
TP-542 6 5/8" API REG 2" TPF, 4 TPI5 1/2" & 6 5/8" API Full Hole V-0.050
TP-543 5 1/2", 7 5/8", & 8 5/8" API REG 3" TPF, 4 TPIV-0.050
TP-642 4" API Full Hole 2" TPF, 4 TPI2 7/8" - 5" Hughes Xtra Hole V-0.038R2 3/8" - 4 1/2" Hughes Slim Hole
TP-23-50 2 3/8" - 5 1/2" API INT Flush 2" TPF, 4 TPI
API Numbered Connections #23 - #50 V-0.038RTP-56-77 API Numbered Connections #56 - #77 3" TPF, 4 TPI
V-0.038R
TP-10-16 API Numbered Connections #10, #12, #13, #16 1.5" TPF, 6 TPIM.T. (Macaroni Tubing) V-0.055
TP-076 2 3/8" - 4 1/2" American Open Hole 1.5" TPF, 4 TPIV-0.076
TP-935-2 3 1/2" - 6 5/8" Hughes H-90 2" TPF, 3.5 TPIH-90
TP-935-3 7" - 8 5/8" Hughes H-90 3" TPF, 3.5 TPIH-90
TP-931-1/4 2 3/8" - 3 1/2" Hughes Slim Line 1.25" TPF, 3TPIH-90
TP-9060LS 90 & 60 Threads, Tool Grinding & Setting Gage Tool Grinding &Setting Gage
TP-NPT-14 NPT Threads " TPF, 14TPI
Standard Overlays
Special Overlays
CONNECTION / DESCRIPTION UNITPRICE
SPECIALS QUOTED
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
28/32
28
DG-1008
BB-7000
PD-3004
CA-9001
PT-4000
SG-8001
TG-9002
TS-1000
TSS-1000
WT-9001
BR-2001
Back-of-Box gage measures coupling and box seal diameters. Gage must be presetwith a standard.
API AND PREMIUM GAGES
Gagemaker has developed many gages for the inspection of premium threaded connections. Manyof these special gages have direct application to API connections as well.
MODEL NO. DESCRIPTION CROSS RANGE UNIT PRICEREF.
TS-1000 Shoulder Depth Gage 1" - 6"
TSS-1000 TS-1000 Setting Standard
TS-4000 Shoulder Depth Gage (Specify Taper) 2 3/8" & Larger
TSS-4000 TS-4000 Setting Standard
DG-1008 Depth Gage w/ digital display (in/mm), .0005" resolution 0" - 8"
DG-1012 Depth Gage w/ digital display (in/mm), .0005" resolution 0" - 12"
DG-1018 Depth Gage w/ digital display (in/mm), .0005" resolution 0" - 18"
DG-1000-R7 7" Extension Arm
DG-1000-R20 20" Extension Arm
DG-1000-B Blade Contact
DG-1000-GV Groove Locator, .100" thick
WT-9001 Wall Thickness Gage 8245-C 2 3/8" - 4 1/2"
WT-9002 Wall Thickness Gage N/A 4 1/2" - 9 5/8"
WT-9003 Wall Thickness Gage N/A 4 1/2" - 13 3/8"
TG-9002 Throat Gage 7802-A
SG-8001 Saddle Gage 5336-C All Sizes
PT-4000 Power Tight Make-up Gage N/A All Sizes
PD-3003 Pit Depth Gage, AGD #1, 0-100 4486-D .090
PD-3004 Pit Depth Gage, AGD #2, 0-100 N/A .450
PD-3005 Pit Depth Gage w/ flat base N/A .450AGD #2, 0-100
PD-3000B Pit Depth Gage BASE ONLY N/A
CA-9001 Coupling Alignment Gage 7964-B All Sizes
BR-2001 Buttress Runout Gage 1211 All SizesBRB-2001 Buttress Runout Base Only N/A
BB-7000 Back-of-Box Seal Diameter Gage N/A Premium
Buttress runout gage insures proper thread pullout on runout type threads. Standard 1"and 2" point spacing.
The coupling alignment gage insures that the threads on both ends of the coupling areproperly aligned with each other.
The PD-3000 measures the depth of surface pitting on tubular goods.
The PT-4000 adjusts to determine the proper make-up location of API couplings.Also available in metric as the PT-4000M.
The Saddle gage measures the amount of hook or bend at the end of a joint of pipe.
The throat gage measures wall thickness up to 1" with a reach of 12".
The WT-9000 series of gages measures wall thickness at specific distances from theend of the pipe. Specify the distance from the end of the pipe to the measuring planewhen ordering.
Gagemakers depth gages inspect the location of internal and external shoulders fromthe face of the pin and box connectors.
DG-1000-B
DG-1000-R20
DG-1000-GV
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
29/32
Prices subject to change without notice 1/04
MODEL NO. DESCRIPTION RANGE UNITPRICE
API AND PREMIUM GAGES (CONTINUED)
Reposition Point Standoff of PN3000 Gages
PN-3001 Pin Nose Diameter Gage 2 3/8" - 5 1/2" (0"-5.750")
PN-3002 Pin Nose Diameter Gage 6" - 9 5/8" (0"-9.750")
PN-3003 Pin Nose Diameter Gage 10" - 13 3/8" (0"-13.750")
PN-3000/T.100 Pin Seal Standoff Plate .100" thick (2 per set)*
PN-3000/T.078 Pin Seal Standoff Plate .078" thick (2 per set)*
PNS-3000 Pin Nose Gage Setting Standard 2 3/8" - 13 3/8"
Pin nose gages measure pin end seal diameters of premium connectors. Specify the distance from the
face of the connector to the measuring plane and desired contact point diameter when ordering.(Customer to supply standoff and point size)
The SQ-1630 squareness gage monitors the alignment of welded connectors to the pipe body
SQ-1630 Squareness Gage 16" diameter, 30" length
SQ-1630S Optional Calibration Square 12" x 32" Square
The ST-7001 measures variation in ring and plug gage standoff on rotary shouldered connectors. Thegage is supplied complete with setting standard.
ST-7001 Indicator Standoff Gage .615" - .635"
Gagemakers API 6B flange groove gages inspect groove diameter and groove width.
BX-1000 6B Groove Diameter Gage w/ T188 Points BX, R, RX Grooves to 13"
BXG-1000 6B Groove Width Gage w/ T072 Points All BX, R, RX Grooves
BXG-1002 Groove width gage Groove widths, 2.0"
BX-R13 Replacement Rod for BX-1000, 13" BX, R, RX Grooves to 13"
BX-R24 Optional Extension Rod for BX-1000, 24" BX, R, RX Grooves to 25"
BX-R30 Optional Extension Rod for BX-1000, 30" BX, R, RX Grooves to 31"
BX-R36 Optional Extension Rod for BX-1000, 36" BX, R, RX Grooves to 37"
The CamLock micrometers measure API weld flange thickness. Supplied with verification standard
CL-1001 CamLock Micrometer - 25 0" - 1"
CL-1002 CamLock Micrometer - 25 1" - 2"
CL-1003 CamLock Micrometer - 25 2" - 3"
CL-1004 CamLock Micrometer - 25 3" - 4"
CG-1001 Bench Calibrator Gage .0001" Resolution, MechanicalCG-1001E Electronic Bench Calibrator Gage w/ SPC .00005"/.001" mm Resolution,
Output Digital
The Gagemaker calibrator gage calibrates gages and indicators per AGD specification, The CG-1000gages are shipped in a durable custom shipping/storage case. Optional wood storage case available.
* Standoff plates available in a variety of thickness
Thread Data API Tubing and Casing Thread Dimension 2 3/8" to 20" 8-Round, LTC,Chart Slide Chart STC, 4 1/2" to 20" Buttress
The Gagemaker API Thread Data Chart provides critical thread data per API Specification 5B.
SQ-1630
SQ-1630S
PNS-3000
ST-7001
PN-3001
CL-1002
BX-1000
BXG-1000
CG-1001
CG-1001E
THREAD DATA CHART
PN-3000/T
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
30/32
30
MODEL NO. REPLACEMENT FOR TRAVEL/ ACCURACY UNITGAGE MODEL NO. RESOLUTION Per ANSI B89.1.10M-1987 PRICE
DIAL INDICATORS
Gagemakers mechanical indicators are manufactured per ANSI AGD specifications. Standard indicatorsused in Gagemaker products are made in the U.S.A.
MODEL NO. INSIDE MEASUREMENTS UNIT PRICE UNIT PRICEw/o FOAM w/ FOAM
PEL-1400 12 1/4" X 9 1/4" X 5 1/4"
PEL-1450 15" X 10 3/8" X 6"
PEL-1500 17 7/8" X 11 3/4" X 6 1/8"
PEL-1550 19 7/8" X 13 1/4" X 7 3/4"
PEL-1600 22" X 17" X 8"
PEL-1700 36" X 13 1/2" X 5"
PEL-1750 50 3/4" X 13 1/2" X 5"
CASE-1 16" X 11" X 3"
CASE-2 14" X 10" X 3"
CASE-3 9" X 12 1/2" X 2 3/4"
CASE-4 7" X 4" X 2"
CASE-5 21 1/2" X 14 1/2" X 6 5/8"
801 (BAL) BR-2001 .250"/.001" .001" .002"
801I (BAL) TH-3002R, TH-3002V .250"/.001" .001" .002"
802 (CONT) WT-9000 Series .250"/.001" .001" .002"
802I (CONT) TH-3001R, TH-3001V, PD-3003 .250"/.001" .001" .002"
803 (BAL) PN-3000 Series, BX-1000, .125"/.0005" .0005" .001"BXG-1000
803I (BAL) TH-3001B, TH-3002B, TH-3003B, .125"/.0005" .0005" .001"TS-4000
805 (BAL) General Application Mechanical .100"/.0005" .0005" .001"
862 (CONT) ET-7000 Series w/ Lever .500"/.001" .001" .002"
862I (CONT) IT-6001, PD-3004 .500"/.001" .001" .002"
863 RG-7000 Series, TH-3004, .500"/.0005" .0005" .001"
TH-3006, TH-3008, TH-3009,TH-3010, SRG-7000, CA-9001MRP-5000 Series,SPG-6000
863L (BAL) PD-8000 Series w/ Lever .500"/.0005" .0005" .001"
863I (BAL) PD-6000, PD-6001 .500"/.0005" .0005" .001"PG-6000 Series, TS-1000, IT-5100
2776FB General Application Mechanical 1.00"/.0005" .0005" .002"
882 (CONT) ET-7003, ET-7005, ET-7007 1.00"/.001" .001" .002"
882I (CONT) IT-6000 1.00"/.001" .001" .002"
80-0403 LG-5003 .100"/.0005" .0005" .001"
80-0400 LG-5003 .025"/.0001" .0001" .0003"
83-0584 MRP-2000, MRP-2500, MRP-3000 .500"/.001" .001" .002"
83-0582 MRP-2000, MRP-2500, MRP-3000 .500"/.0005" .0005" .001"87-070 MRP-1000, MRP-1500 .125"/.0005" .0005" .001"
543-683B Electronic/Digital .500"/.0005" .0005" .001"
2358B-50 General Application Mechanical .500"/.0001" .0001" .0003"
Gage storage cases are supplied with or without foam inserts. Custom fitting of gages to cases isavailable. Custom cutting of cases is priced on an hourly basis, call for quotation.
GAGE STORAGE CASES
FIRST 2 1/3 REV AFTER 2 1/3 REV
Note: I after model number indicates counter clockwise rotation.L after model number indicates a lifting lever.
Dial Indicators
DigitalIndicators
Custom Storage Cases
PEL SERIESHeavy-Duty Shipping/Storage Cases
CASE SERIESStandard Storage Cases
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
31/32
Prices subject to change without notice 1/04
Calibration Services
Gages, Standards, and Inspection Equipment
Gagemaker provides full service calibration on all gages sold. A standard long form certificate is
provided with all calibrations, at no extra charge. Gages produced and sold by other manufacturersare quoted on an individual basis. The prices listed below are to be used as a guideline only. Many timesrepairs are necessary to maintain gage calibration. All repairs are quoted and require customerauthorization prior to work being done. An evaluation charge of $75.00 is required to quote repairs.
MIC TRAC Calibration (All Models)
MIC TRAC Model No.
MIC TRAC Model Options
Note: Gagemaker cannot guarantee the accuracy of this unit unless it is correctly packaged and shipped in a propercarton. Request a Return Authorization Number and instructions, prior to shipping. Current cost for a replacementshipping container is $180.00. All MIC TRAC units are supplied with a calibration certificate and inch-by-incherror report, at no additional charge.
Gages and Other Inspection Equipment Calibration
Calibration Certificates
MIC TRACwith SLEC File
RepairRate ($/hr)MIC TRAC
Non Force-LokUnit
MIC TRAC Force-Lok Unit
MIC TRACwith Probe andDigital Readout
TRAC-2012, MT-3012
TRAC-2024, MT-3024
TRAC-2036, MT-3036
TRAC-2048, MT-3048
TRAC-2060, MT-3060
MT-4012MT-4024
MT-4036
MT-4048
Model No. Services AvailableCalibration
PriceRepair
Rate ($/hr)
Gage Calibration Equipment
TF-1F, TF-2R Sett ing Blocks Inspect flatness, parallelism, and size
TF-XXT Taper Blocks Inspect taper and size
TF-XXRSC Taper Block Set Inspect taper and sizeTF-BX Setting Blocks Inspect angle and size
TF-TP Calibration Fixture Inspect and calculate new constant
CG-1001 Bench Calibrator Gage Veri fy micrometer travel
RG-7000, PG-6000 Diameter Gages Verify function and check parallelism
Thread Diameter Measurement Gages
MIC 360 Gage Verify wheel diameter and gage function
Large Diameter Measurement Gages
Lead Gages Calibrate indicator and verify function
Lead Standards Inspect step/step per specification
MRP Gages Inspect complete assembly
MRP Standard Set Inspect rod lengths per specifications
Thread Height Standards Inspect groove depths per specificationsProfile Gages Verify profile with optical comparator
API Gages/Standards
Indicators Calibrate per specification
Thread Rolls Calibrate per specification
CMM Contract Inspection Per customer specifications
Miscellaneous Equipment
Special Long Form Certificates includes any documentation other than that listed
under the Standard Long Form Certificate.
Certificate Type Price
Standard Long Form Certificates provided with all calibrations. Includes model number,serial number, required and actual measurements, traceability to NIST or other governingbody, inspectors signature, calibration and recalibration date. Profile gages are issuedcertificates of compliance only.
CALIBRATIONCERTIFICATES
DETERCO. Houston, Texas
Phone: 713-943-2721 Fax: 713-943-3170
Web site: www.deterco.com
7/25/2019 Gagemaker 2004 Catalog
32/32
Recommended