View
102
Download
0
Category
Preview:
Citation preview
5/20/2018 Ficha Tecnica Termoencogible
1/33
CYGheatshrink.co
201C A T A L O
POLYOLEFIN SINGLE WALL TUBING POLYOLEFIN DUAL WALL TUBING
SPECIAL DESIGN SINGLE WALL TUBING EXTRUSION TUBE
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
HEAT SHRINK
TUBING
CYG AGENT
5/20/2018 Ficha Tecnica Termoencogible
2/33
CYG Electronics (Shenzhen) Co. Lt. (CYG) is the leaing manufacturer of heat shrinabl
proucts in China. With more than 15 years eperience in inustry research an evelopmen
CYG is the 3r largest heat shrin manufacturer in the worl. CYG now has si sub-factorie
an went public with a successful Chinese stoc maret launch in 2002. [Shanghai Stoc
Echange Coe: 600525]
CYG prouces a comprehensive range of heat shrinable tubing in various colors an shrin
raos, Teon tubing proucts an PVC tubing. All proucts are manufacture uner TS1694
Quality System an ISO9001 Environment System cercaons an are prouce to mee
or ecee UL224 or MIL approval requirements. They are wiely use in els such a
automove, communicaons, construcon, electrical, energy an logiscs.
Environmentally responsible proucon is a requirement at CYG. As both a Samsung an
Sony Green Partner, our proucts not only meet Sonys environment substance requirement
but are also EU ROHS compliant.
Toay, CYG enjoys an ecellent reputaon for eporng high quality proucts to Europe
North America, South America , Australia, an South East Asia.
Being a ey supplier of electrical insulaon an protecon proucts, it is our mission to elive
safe, reliable an innovave new proucts that combine opmal value with high quality. W
bac everything we manufacture with eceponal customer service to our partners.
5/20/2018 Ficha Tecnica Termoencogible
3/33
5/20/2018 Ficha Tecnica Termoencogible
4/33
- 4 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
To place an order or for any uesons,
call customer service at:
231.599.9956
orders@cygheatshrink.com
5/20/2018 Ficha Tecnica Termoencogible
5/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
TABLE OF CONTENTS
CBHFT 600, 2:1 NONAdHESIVE UL ANd CSA APPROVEd HEAT SHRINk ............................................
CBTM, 2:1 OR 3:1 NONAdHESIVE MIL STANdARd, UL
ANd CSA APPROVEd HEAT SHRINk MARkER MATERIAL
IN BULk OR FORMATTEd .........................................................................................................................CBHFT3x/4x, 3:1 OR 4:1 NONAdHESIVE UL
ANd CSA APPROVEd HEAT SHRINk .........................................................................................................
CBHFT1000, 2:1 NONAdHESIVE MIL STANdARd,
UL ANd CSA APPROVEd HEAT SHRINk ...................................................................................................
CBdWT2x,3xOR4x 2:1, 3:1 OR 4:1 dUAL WALL AdHESIVE
LINEd UL ANd CUL APPROVEd HEAT SHRINk TUBING .........................................................................
CBdWT10003x 3:1 dUAL WALL AdHESIVE LINEd MIL STANdARd,
UL ANd CSA APPROVEd HEAT SHRINk TUBING .....................................................................................
CBdWT3000 4:1 dUAL WALL AdHESIVE LINEd MIL STANdARd,
UL ANd CSA APPROVEd HEAT SHRINk TUBING ....................................................................................
CBdWTFR 4:1 dUAL WALL FLAME RETARdANT AdHESIVE LINEd
MIL STANdARd, UL ANd CSA APPROVEd HEAT SHRINk TUBING .........................................................
CYGkYNAR 175C 2:1 FLAME RETARdANT PVdF MIL STANdARd,
UL ANd CSA APPROVEd HEAT SHRINk TUBING .....................................................................................
CYGPTFE 1.8:1 HIGH TEMPERATURE, HIGH FLAME RETARdANT
MIL STANdARd, UL ANd CSA APPROVEd HEAT SHRINk TUBING .........................................................
CBTT NON SHRINkABLE PTFE TUBING UL APPROVEd .........................................................................
CBPVC 300/600 NONSHRINkABLE PVC TUBING UL ANd CSA APPROVEd ........................................
CBSRS FIBERGLASS TUBING WITH SILICONE RUBBER COATEd
UL ANd CSA APPROVEd ........................................................................................................................
CBSGS FIBERGLASS TUBING WITH SILICONE RESIN COATEd
UL ANd CSA APPROVEd ...........................................................................................................................
EqUIPMENT FOR THE PROCESSING OF HEAT SHRINK
HEAT SHRINk PRINTER CAB A4+M FOR PRINTING
ON ONE SIdE OF HEAT SHRINk.................................................................................................................
dUAL HEAd HEAT SHRINk PRINTER CAB xdM4 FOR PRINTING ON BOTH SIdES OF HEAT SHRINk ..
HEAT SHRINk PROCESSING MACHINES THAT USE HALOGEN LIGHT SOURCE .....................................
HEAT GUNS ................................................................................................................................................
5/20/2018 Ficha Tecnica Termoencogible
6/33
- 6 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CBHFT600 UL/CUL NONADHESIVE
HEAT SHRINKABLE TUBING
CB-HFT(600) is UL/CUL rate halogen-free, e-
ible, ame-retarant polyolen 2:1 heat shrinable
tubing. This tubing is low smoe generang, abra-sion resistant an in case of burning, prouces no
ioin. CB-HFT tubing is wiely use in enclose
areas where a ame-retarant, halogen-free envi-
ronment is require. It is perfect for electrical an
electronics applicaons an has uses in els such
as aerospace, automove, construcon, power e-
livery, an mass transit vehicles incluing buses,
trains, airplanes, an marine vessels.
Cercaons: UL, CUL, F-mark,Sony Green Partner
SPECIFICATIONS
Specicaons of HFT(600):
Item Specicaons
Shrin Temperature (C) 90C
Operang Temperature Range (C) 125C
Raial Shrining Rao (%) 50
Longituinal Change (%) 5
Tensile Strength (Mpa) 10.4
Elongaon at brea (%) 200
Aging in Circulang-air Oven 158.01.0C, 168hrs
Aer agingTensile Strength (Mpa) 7.3
Elongaon at brea (%) 100
Volume Resistance ( .cm) 1014
dielectric Strength at 1 min, AC2500V No breaown
Heat shoc No cracing
Flammability VW-1
Concentricity (%) 70
5/20/2018 Ficha Tecnica Termoencogible
7/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
SIzING
Size (Inches)
(Reel Size in feet)
As Supplie (inches) Aer Recovery (inches)
MIN Id WALL MAx Id WALL
1/16 (500 ) .062 .0078.003 .0313 .0157.0024
3/32 (500 ) .093 .0078.003 .0469 .0165.0032
1/8 (500 ) .125 .0098.004 .0625 .0181.0032
3/16 (250 ) .187 .0098.004 .0938 .0196.0039
1/4 (250 ) .25 .0110.004 .125 .0220.0039
5/16 (250 ) .313 .0118.004 .157 .0228.0039
3/8 (200 ) .375 .0118.004 .1875 .0236.0039
1/2 (200 ) .50 .0141.005 .25 .0256.0047
5/8 (200 ) .625 .0141.005 .313 .0275.0047
3/4 (100 ) .75 .0157.006 .375 .0295.0047
1 (100 ) 1 .0157.006 .50 .0354.0059
11/2 (100 ) 1.5 .0216.009 .75 .0433.0098
2 (100 ) 2 .0236.009 1 .0472.0098
3 (100 ) 3 .0275.012 1.5 .0571.0098
4 (100 ) 4 .0275.012 2 .0571.0098
Other sizes are available upon special orer.
Part numbers for above proucts are CB-HFT600-(dia. Size)-(Color)-(Reel Size), for eample,
CB-HFT600-1/2-Bk-200 woul be HFT600 series, in a iameter, in blac, on a stanar 200
foot reel. 1/8 through 3/8 are available in a Flat style (opon) for easier use with printers.
5/20/2018 Ficha Tecnica Termoencogible
8/33
- 8 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CBHFTTM HEATSHRINKABLE INDENTIFICATION MARKER SLEEVES
CB-HFT(TM)-L is our laer material. CB-HFT(TM)-B
is our bul material on a reel. CB-HFT(TM) is use to
ienfy wire an cable, tools, hoses an equipment
in operang environments where temperatures
range from 55 to 135. It can withstan abrasion
an eposure to cleaning solvents an other inus-
trial uis. Sleeves are ame-retarant an can be
use for electrical insulaon.
This tubing can be custom printe with wors an
symbols on both sies by thermal transfer equip-
ment an all marings are permanent aer prinng.
Available in 2:1 an 3:1 shrin raos an in many
ierent sizes an shapes.
Cercate: UL, CUL, F-mark, Sony Green PartnerStanar: UL224, AMS-dTL-23053/5, SAE-AS81531, MIL-STd-202
Stanar color: at white an yellow
SPECIFICATIONS
Specicaons:Item Specicaons
Physical performance
Operaon temp. -55C~135C
Tensile strength (M Pa) 10.3Mpa
Ulmate elongaon rao(%) 200%
Fleibility (-55C, 4hrs) No cracing
Heat shoc No cracing, ripping, owing
Print performance
UL 224, 50 Rubber erasure , iencaon
MIL-M-81531-4.6.2 50 Rubber erasure , iencaon
MIL-STd-202 30 Rubber erasure , iencaon
Electrical performance
dielectric strength 19.7kV/mm
Volume Resistance 1014cm
Flammability as per AMS-dTL-23053 Average burn me is
5/20/2018 Ficha Tecnica Termoencogible
9/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
SIzING C BHFT TM 3X
SIZE Inch Min Epane iameter as
supplie (mm)
Ma iameter Aer
recovery (mm)
Recommene use range
(mm)
3/32 2.4 0.80 0.9-2.0
1/8 3.2 1.07 1.1-2.7
3/16 4.8 1.60 1.8-4.1
1/4 6.4 2.11 2.3-5.5
3/8 9.5 3.2 3.5-8.0
1/2 12.7 4.2 4.7-10.8
3/4 19.1 6.35 7-16.3
1 25.4 8.46 9.3-21.6
1-1/2 38.1 12.7 13-33.5
2 50.8 16.9 17-48
SIzING C BHFT TM 2X
SIZE Inch Min Epane iameter
as supplie (mm)
Ma iameter Aer
recovery (mm)
Recommene use
range(mm)
3/32 2.4 1.2 1.3-2.0
1/8 3.2 1.6 1.7-2.73/16 4.8 2.4 2.5-4.1
1/4 6.4 3.2 3.3-5.5
3/8 9.5 4.8 4.9-8.0
1/2 12.7 6.4 6.5-10.8
3/4 19.1 9.5 9.6-16.3
1 25.4 12.7 12.8-21.6
1-1/2 38.1 19.1 19.2-33.5
2 50.8 25.4 25.5-48
5/20/2018 Ficha Tecnica Termoencogible
10/33
- 10 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CBHFT3X ,CBHFT4X UL/CUL
NONADHESIVE HEAT SHRINKABLE TUBING
CB-HFT(3x) 3:1 shrin rao an CB-HFT(4x) 4:1
shrin rao are UL/CUL rate, non-ahesive, halo-
gen-free, eible, ame-retarant polyolen heatshrinable tubing. This tubing can be use in areas
where larger than the stanar 2:1 shrin rao are
neee. It is also use for protecon an maring
of special shape objects, such as wire terminaons
an electrical connecons, cables an electronic
components.
Cercate: UL, CUL, F-mark,
Sony Green Partner
SPECIFICATIONS
Specicaons of HFT(3X) and HFT(4X):Item Specicaons
Shrin Temperature (C) 90C
Operang Temperature Range (C) 125C
Shrining Rao 3:1, 4:1
Longituinal Change (%) 5
Tensile Strength (Mpa) 10.4
Elongaon at brea(%) 200
Aging in Circulang-air Oven 158.01.0, 168hrs
Aer agingTensile Strength (Mpa) 7.3
Elongaon at brea (%) 100
Volume Resistance ( cm) 1014
dielectric Strength at 1 min, AC2500V No breaown
Flammability VW-1
Concentricity (%) 65
5/20/2018 Ficha Tecnica Termoencogible
11/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
SIzE OF HF T 4X
SIzE OF HF T 3X
Size (mm)
As Supplie (mm) Aer Recovery (mm)
Min. Insie
diameter
Nominal
Wall-thicness
Ma. Insie
diameterWall-thicness
1.5/0.5 1.5 0.180.08 0.5 0.40.1
3/1 3.0 0.200.08 1.0 0.550.1
4.5/1.5 4.5 0.200.08 1.5 0.550.1
6/2 6.0 0.220.0 2.0 0.60.15
9/3 9.0 0.250.0 3.0 0.70.15
12/4 12.0 0.250.1 4.0 0.70.15
15/5 15.0 0.250.1 5.0 0.70.15
18/6 18.0 0.30.12 6.0 0.80.2
24/8 24.0 0.360.15 8.0 1.00.2
30/10 30.0 0.360.15 10.0 1.00.2
33/11 33.0 0.360.15 11.0 1.00.2
39/13 39.0 0.450.15 13.0 1.250.2
Size (mm)
As Supplie (mm) Aer Recovery (mm)
Insie
iameter
Nominal
Wall-thicnessInsie iameter Wall-thicness
8/2 8.50.5 0.300.15 2.0 0.950.15
10/2.5 10.50.5 0.300.15 2.5 1.000.15
12/3 12.50.5 0.300.15 3.0 1.000.15
16/4 16.50.5 0.300.15 4.0 1.000.15
18/4.5 18.50.5 0.300.15 4.5 1.000.15
20/5 20.50.5 0.300.15 5.0 1.000.15
24/6 25.50.5 0.400.20 6.25 1.400.20
5/20/2018 Ficha Tecnica Termoencogible
12/33
- 12 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CBHFT1000 MIL/UL NONADHESIVE HEAT SHRINKABLE TUBING
CB-HFT(1000) is MIL Spec, non-ahesive, low-
smoing, halogen-free 2:1 polyolen cross-line
heat shrinable tubing that is esigne to meet the
specialize requirements of the automove inus-
try. It has goo resistance to oil an is an ecellent
insulator. This material is very eible an has e-
cellent mechanical strength, so it is suitable for a
wie range of applicaons incluing automove oil
pipes, electronics insulaon, wire protecon, an
any place protecon is neee in etreme environ-
ments.
Cercate: UL, CUL, F-mark, Sony Green
Partner Standard: UL224, AMS-DTL-23053/5
SPECIFICATIONS
Specicaons of HFT(1000):Item Test metho Stanar Specicaons
Operang Temperature Range -55C - +135C
Shrin Temperature +100 C - +140C
Tensile Strength (MPa) ASTM d638 10.4MPa 14.1MPa
Elongaon at Brea ASTM d638 200% 329%
dielectric Strength ASTM d2671 19.7v/mm 26v/mm
Volume Resistance ASTM d876 11012 3.61014
Longituinal Change -5% ~ +5% -4%
Raial Shrin Rao 50% 66%
Concentricity 50% 73%
Aging in Circulang
Air Oven1752C, 168hrs
Tensile Strength ASTM d638 6.9MPa 9.5MPa
dielectric Strength ASTM d2671 15.8v/mm 24v/mm
Heat Shoc 25034hrs No ropping, No ow,
No cracing
pass
Copper corrosion ASTM d2671 1752168hrs No corrosion
5/20/2018 Ficha Tecnica Termoencogible
13/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
SIzE OF HFT 1000
Size in inches
(Reel size in )
Insie iameter Wall thicness aer
recovery
(in inches)Min Id As supplie (ininches) Ma Id Aerrecovery (in inches)
1/16 (500 ) .0625 0.3125 0.0170.003
3/32 (500 ) .09375 0.046875 0.020.003
1/8 (500 ) .125 .0625 0.020.003
3/16 (250 ) .1875 .09375 0.020.003
1/4 (250 ) .25 .125 0.0250.003
3/8 (200 ) .375 .1875 0.0250.003
1/2 (200 ) .5 .25 0.0250.003
3/4 (100 ) .75 .375 0.030.003
1 (100 ) 1 .5 0.0350.005
11/2 (100 ) 1.5 .75 0.040.006
2 (100 ) 2 1 .04490.007
5/20/2018 Ficha Tecnica Termoencogible
14/33
- 14 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CB DWT 2X3X4X UL/CUL ADHESIVE LINED HEAT SHRINKABLE TUBING
CB-dWT(2x)(3x)(4x) is 2:1, 3:1 an 4:1, UL/CUL
rate, ahesive-line, eible, halogen-free an
ame-retarant polyolen heat shrinable tubing
which is ROHS compliant an meets Sonys environ-
ment relate substance requirements. This tubing
has goo mechanical strength an provies protec-
on from uis, moisture an corrosion. CB-dWT
is use in a wie variety of electrical applicaons,
incluing bac en connector sealing, breaouts,
an connector-to-cable transions. High epansion
rao maes it possible to repair most amage ca-
ble jacets without removing connectors.
Cercate: UL, CUL, F-mark, Sony Green Partner
SPECIFICATIONS
Specicaons of
DWT(2X), DWT(3X) and DWT(4X):Item Specicaons
Shrin Temperature(C) 110C
Operang Temperature Range(C) -55C125C
Tensile Strength (Mpa) 10.4
Elongaon at brea (%) 200
Raial shrining rao (%) 50
Longituinal Change (%) 10
Aging in Circulang-air Oven 158.01.0C, 168hrs
Aer Aging Tensile Strength (Mpa) 7.3
Elongaon at brea(%) 100
dielectric Strength at 1min, AC2500V No breaown
Volume Resistance ( cm) 1013
Flammability VW-1
Water Absorpon (%) Less than 0.4%
Flui Resistance Ecellent
(Copper Corrosion) (No Corrosion)
Soening Point of Meltable Liner (C) 1205
Peel Strength of Meltable Liner (N/25mm) >80
5/20/2018 Ficha Tecnica Termoencogible
15/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
SIzE OF DWT 2X
Size(Inch)
As Supplie Aer Recovery
Min Id (inches)Nominal Wall
(inches)
Ma Id
(inches)Total Wall (inches)
Nominal Ahesive
Wall(inches)
1/16 .0625 .0118 .03125 .0177.0047 .0078
3/32 .09375 .01378 .046875 .02165.0047 .0118
1/8 .125 .01575 .0625 .02362.006 .0118
3/16 .1875 .01575 .09375 .02953.006 .01378
1/4 .25 .01575 .125 .02953.006 .01378
3/8 .375 .01575 .1875 .0315.0079 .01378
1/2 .5 .01575 .25 .0315.0079 .01378
3/4 .75 .01969 .375 .0374..0110 .01578
1 1 .01969 .5 .04528.0110 .0177
1 -1/2 1.5 .0256 .75 .04921.0161 .0177
SIzE OF DWT 3X
Size (Inch)
As Supplie Aer Recovery
Min Id
(inches)
Nominal Wall
(inches)
Ma Id
(inches)Total Wall (inches)
Nominal Ahesive Wall
(inches)
1/8 .125 .01575 .04167 .03346.011 .01378
3/16 .1875 .01575 .0625 .04134.011 .01772
1/4 .25 .0177 .08333 .04331.011 .01772
3/8 .375 .0236 .125 .05709.011 .01772
1/2 .5 .0236 .1667 .05906.0145 .01772
3/4 .75 .0295 .25 .07874.0217 .02559
1 1 .0295 .3333 .07874.0217 .02559
1 1/4 1.25 .0315 .4167 .08661.0217 .02953
1 1/2 1.5 .03346 .5 .10.0217 .03937
2 2 .03937 .6667 .10.0217 .03937
SIzE OF DWT 4X
Size (mm)
As Supplie (Epane) Aer Recovery (Recovere)
Min Id(mm) Ma Id(mm) Total Wall (mm)Nominal Ahesive Wall
(mm)
4/1 4 1 1.100.3 0.50
8/2 8 2 1.100.3 0.50
12/3 12 3 1.400.3 0.61
16/4 16 4 1.80.3 0.76
24/6 24 6 2.250.55 0.76
32/8 32 8 2.540.55 1.02
52/13 52 13 2.600.55 1.02
5/20/2018 Ficha Tecnica Termoencogible
16/33
- 16 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CB DWT1000 ADHESIVELINED HEAT SHRINKABLE TUBING
CB-dWT(1000) is a 3:1, MIL Spec, ahesive-line,
eible, ame-retarant polyolen heat-shrinable
ual-wall tubing. This tubing has goo mechanical
strength, oil-resistance an bio resistance when
use for etreme environments an specialize
protecon. CB- dWT(1000) is wiely use in jacet-
ing for wire bunles an harnesses.
Standard: UL224 and MIL - SAE-AMS-
DTL23053/4, F Mark, Sony Green Partner
SPECIFICATIONS
Specicaon of DWT(1000):
Item Test methos Specicaons Typical value
Operang Temperature Range -55C +135C
Shrin Temperature +100C + 140C
Shrin Rao 3:1
Tensile Strength ASTM d638 10.4MPa 14.1MPa *1
Elongaon At Brea (%) ASTM d638 200% 329%
2% Scan Moulus ASTM d882 172MPa 153MPa
Heat Shoc 2503 , 4hrs No cracing, ripping, owing Pass
Col Shoc ASTM d745, -552 No cracing Pass
dielectric Strength ASTM d2671 19.7v/mm 26v/mm
Volume Resistance ASTM d876 11012 3.61013
Aging 1752 , 168hrs Ahesive, no ripping
Sleeving, no cracing Pass
Oil Resistant 243 , 24hrs
Tensile Strength Aer Aging ASTM d638 6.9MPa 9.5MPa
dielectric Strength Aer Aging ASTM d2671 15.8v/mm 24v/mm
SIzE OF DWT 1000
SizeInsie diameter (inches) Wall Aer Recovery (inches)
Min. as supplie Ma. aer recovery Total wall Ahesive wall
1/8 .125 .04167 .0382.0060 .02
3/16 .1875 .0625 .0429.0060 .025
1/4 .25 .08333 .0469.0070 .027
3/8 .375 .125 .0500.0070 .03
1/2 .5 .1667 .0551.0070 .035
3/4 .75 .25 .0650.0070 .04
1 1 .3333 .0752.0070 .04
5/20/2018 Ficha Tecnica Termoencogible
17/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
CBDWT3000 SEMIRIGID HEAT SHRINKABLE TUBINGS
WITH MELTABLE LINER
CB-dWT(3000) is a 4:1, MIL Spec, semi-rigi, ame-
retarant, ahesive-line polyolen heat shrin-
able tubing. It is esigne to meet automoverequirements for sealing an electrical insulaon
when use for covering wire splices, terminaons
an components. It provies abrasion protecon
for wire splices, an is ui-resistant an moisture-
proof, to guar against corrosion.
Standard: UL224, MIL - SAE-AMS-
DTL-23053, F mark, Sony Green partner
SPECIFICATIONS
Specicaons of DWT(3000):Item TEST METHOd Specicaons
Operang temperature range (C) -40C to 135C
Min. shrin temperature (C) 110C
Longituinal Change (%) ASTM d 2671 0~10%
Tensile Strength (M Pa) ASTM d 2671 10.3
Elongaon at brea(%) ASTM d 2671 250
Scant Moulus at 2%
(epane)* (M Pa)ASTM d 2671 137
Heat Shoc 4 hours at 250C (437) ASTM d 2671 No ripping, owing or cracing of outerjacet
dynamic Cut Through (kG) ASTM d 3032
Volume Resistance (ohm-cm ) ASTM d 2671 1.0 1012
Flammability ASTM-d2671 Self-enguishing within 30 secons
Tensile Strength(M Pa) aer aging ASTM d 2671
Oil-resistance: 97# oil at 233 , 24h 1003 , , 1h
IRM 902#
IRM903# No cracing
SIzE OF DWT 3000
P/N
As supplie (mm) Aer recovery
Min. insie
iameter
Ma. insie
iameterTotal wall
Min. ahesive
wall
CB-dWT(3000)-1 5.72 1.27 1.20 0.56
CB-dWT(3000)-2 7.44 1.65 1.52 0.76
CB-dWT(3000)-3 10.85 2.41 1.91 1.02
CB-dWT(3000)-4 17.78 4.45 2.41 1.37
5/20/2018 Ficha Tecnica Termoencogible
18/33
- 18 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CBDWTFR HEAT SHRINKABLE DUALWALL TUBING
WITH FLAMERETARDANT ADHESIVE
CB-dWT(FR) is a 4:1, MIL spec, ahesive line, eible,
ame-retarant ahesive an polyolen heat shrin
ual-wall tubing. It is special esigne for automovewire harnesses an features goo mechanical strength,
sealing, oil-resistance an insulaon properes. CB-
dWT(FR) is wiely use for all ins of automove wire
harnesses, an is especially useful in harsh environ-
ments or where special protecon is require.
Standard: UL224, MIL - SAE-AMS-DTL-23053,
F mark, Sony Green partner
SPECIFICATIONS
Specicaons of DWT(FR):Item Specicaons
Shrin Temperature(C) 100C - 150C
Operang Temperature Range(C) -55C - 135C
Tensile Strength (Mpa) 10.4
Elongaon at Brea (%) 200
Raial Shrining Rao (%) 50
Longituinal Change (%) 10
Aging in Circulang-Air Oven 158.01.0C, 168hrs
Aer AgingTensile Strength (Mpa) 7.3
Elongaon at brea(%) 100dielectric Strength at 1min, AC2500V No breaown
Volume Resistance ( cm) 1013
Flammability VW-1
Water Absorpon (%) Less than 0.4%
Flui Resistance Ecellent
(Copper Corrosion) (No Corrosion)
Soening Point of meltable Liner(C) 1205
Peel Strength of Meltable Liner(N/25mm) >80
SIzE OF DWT FR
SizeAs supplie Aer full recovery
Id (mm) Id (mm) Total Wall Ahesive Wall
7.6 7.6 1.65 1.50.3 0.70
9.0 9.0 2.30 1.50.4 0.70
11.6 11.6 2.54 2.30.4 1.20
17.8 17.8 4.45 2.50.4 1.20
5/20/2018 Ficha Tecnica Termoencogible
19/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
CBKYNAR175C FLAMERETARDANT PVDF HEAT SHRINKABLE TUBING
CB-kYNAR(175C) is 2:1, MIL Spec, clear, thin wall,
semi-rigi, ame-retarant heat-shrinable tubing
with both high temperature an chemical resistance.
This is especially suitable for applicaons requiring
high temperature performance, outstaning abrasion
resistance an cut-through resistance, or superior
chemical an solvent properes. Provies electrical
insulaon an strain relief of mulpoint connectors
an soler joints. CB-kYNAR(175C) is ieal for appli-
caons that require ense pacing of components or
visual inspecon of covere components.
Standard: UL224, SAE-AMS-DTL25053/8
SPECIFICATIONS
Specicaons of KYNAR(175):
Item Test Metho UnitSpecicaons
For CYG-kYNAR(150C)
Specicaons
For CYG-kYNAR(175C)
Min. Shrin Temperature C 140C 155C
Operaon Temperature Range C -55C ~150C -55C ~175C
Specic Gravity ASTM d792 g/cm3 1.78 1.78
Tensile Strength ASTM d2671 M Pa 30 34.5
Elongaon at Brea ASTM d2671 % 150 150
Elongaon at Brea aer Aging 225,168h % 100 50
Heat Shoc 275,4h - -No Cracing- -No Cracing-Col Ben -55,4h - -No Cracing- -No Cracing-
dielectric Strength ASTM d2671 V/mm 15.7 30
Volume Resistance ASTM d257 .cm 1013 1013
Flammability UL-224 VW-1 Pass Pass
SIzE O F KYNAR 175
Size
Min. insie
iameter as
supplie(mm)
Ma. Insie
diameter
aer recov-
ery (mm)
Recovere
Wall Thic-
ness (mm)
3/64 1.2 0.6 0.25 0.05
1/16 1.6 0.8 0.25 0.05
3/32 2.4 1.2 0.25 0.05
1/8 3.2 1.6 0.25 0.05
3/16 4.8 2.4 0.25 0.05
1/4 6.4 3.2 0.33 0.05
Size
Min. insie
iameter as
supplie(mm)
Ma. Insie
diameter
aer recov-
ery (mm)
Recovere
Wall Thic-
ness (mm)
3/8 9.5 4.8 0.33 0.05
1/2 12.7 6.4 0.33 0.05
4/3 19.1 9.5 0.43 0.08
1 25.4 12.7 0.48 0.08
1 1/2 38.1 19.1 0.48 0.08
5/20/2018 Ficha Tecnica Termoencogible
20/33
- 20 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
SPECIFICATIONS
CBPTFE HEAT SHRINKABLE TUBING
CB-PTFE is a 1.8:1, MIL Spec, high temperature, highly
ame-retarant PTFE tubing with ecellent chemical
resistance. It is esigne to provie insulaon an me-
chanical protecon in severe chemical an thermal en-
vironments. CB-PTFE is normally use to cover hyrau-
lic hoses an couplings to prevent contaminaon an
corrosion. The high mechanical strength an etremely
low coecient of fricon mae it ieal for reucing
amage to bearing shas an similar applicaons.
Standard: UL224 and MIL - SAE-AMS-
DTL-23053/12
Specicaons of PTFE:Item Test Metho Unit Specicaons
Specic Gravity ASTM d792 g/cm3 2.16
Operang Temperature C -55C to+260C
Min. Melng Temperature: C 327C
Tensile Strength ASTM d638 M Pa 24.5
Elongaon at brea ASTM d638 % 350
Bening Moulus ASTM d790 M Pa 490
Impact Strength ASTM d256+23-54j/m No crac
Harness (shore) ASTM d2240 Shore d 55
Coecient of dynamic Fricon 0.1
Flammability UL-224 VW-1
dielectric Constant 103-106Hz ASTM d150 2.1
dielectric dissipaon
Factor 106Hz ASMT d150 0.0002
Arc Resistance ASMT d495 S >300
Linear Coecient of Epansion ASTM d257 /cm >1018
Weather Resistance Weather-o-meter(2000h) No crac
Flui resistance ASTM d543 Ecellent
Chemical resistance ASTM d543 Ecellent
5/20/2018 Ficha Tecnica Termoencogible
21/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
SIzE OF PTFE
SIZE
Insie iameterWall thicness Aer
recovery (mm)Min. supplie insieiameter Ma. Recovere insieiameter
AWG 30 0.8 0.38 0.23
AWG 28 0.9 0.46 0.23
AWG 26 1.1 0.53 0.25
AWG 24 1.2 0.66 0.25
AWG 22 1.4 0.81 0.30
AWG 20 1.5 0.97 0.30
AWG 18 1.9 1.17 0.30
AWG 16 2.3 1.47 0.30
AWG 14 3.0 1.83 0.30AWG 12 3.8 2.31 0.30
AWG 10 4.8 2.84 0.30
AWG 8 6.1 3.53 0.38
AWG 6 7.6 4.41 0.38
AWG 4 9.4 5.53 0.38
AWG 2 10.9 6.93 0.38
AWG 0 11.9 8.69 0.38
Stanar Color: Clear (Natural)
*Other colors an sizes are available upon special orer
5/20/2018 Ficha Tecnica Termoencogible
22/33
- 22 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CBTTL/S/T PTFE NONHEAT SHRINKABLE TUBING
CB-TT series PTFE is a UL Rate tubing that fea-
tures high temperature (260C) resistance, corro-
sion resistance, ecellent insulaon an mechani-
cal strength properes. This tubing is wiely use
throughout the electrical an chemical inustries,
an its high temperature rang allows aerospace,
military, computer an power transmission appli-
caons. This prouct is UL liste uner le number
E180908. All are F mar.
SPECIFICATIONS
Specicaons of TT:Item Test Metho Unit Specicaons
Specic Gravity ASTM d792 g/cm3 2.16
Tensile strength ASTM d638 M Pa 24.5
Elongaon at brea ASTM d638 % 350
Fleural Moulus ASTM d790 M Pa 490
Impact Strength ASTM d256+23-54j/m -No brea- 107
Harness ASTM d2240 Shore d 55
Coecient of dynamic Fricon 0.1
Melng Point C 327C
Service Temperature 20000h with
50% Retenon Of Elongaon at breaC 260C
Flammability UL-224 VW-1
dielectric Constant At 103-106Hz ASTM d150 2.1
dissipaon Factor At 106Hz ASTM d150 0.0002
Arc Resistance ASTMd495
(Stainless steel electroes) S >300
Volume Resistance ASTM d257 cm >1018
Weather Resistance Weather-o-meter(2000h) No brea
Solvent Resistance ASTM d543 Ecellent
Chemical Resistance ASTM d543 Ecellent
5/20/2018 Ficha Tecnica Termoencogible
23/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
SIzE OF TT
PTFE Insulaon Tubing
Size Id(mm) Od(mm)AWG MIN NOR MAx CB-TT(S) CB-TT(T) CB-TT(L)
30 0.25 0.30 0.38 0.76 0.76 0.60
28 0.33 0.38 0.46 0.84 0.84 0.68
26 0.41 0.46 0.53 0.92 0.92 0.76
24 0.51 0.56 0.66 1.16 1.06 0.86
23 0.58 0.66 0.74 1.26 1.16 0.96
22 0.66 0.71 0.81 1.31 1.21 1.01
21 0.74 0.81 0.89 1.41 1.31 1.11
20 0.81 0.86 0.97 1.66 1.46 1.16
19 0.91 0.96 1.07 1.76 1.56 1.26
18 1.01 1.07 1.17 1.87 1.67 1.37
17 1.14 1.19 1.32 1.99 1.79 1.49
16 1.29 1.34 1.47 2.14 1.94 1.64
15 1.45 1.50 1.65 2.30 2.10 1.80
14 1.62 1.68 1.83 2.48 2.28 2.08
13 1.83 1.93 2.05 2.73 2.53 2.33
12 2.05 2.16 2.31 2.96 2.77 2.56
11 2.31 2.41 2.57 3.21 3.01 2.81
10 2.59 2.69 2.84 3.49 3.29 3.09
9 2.90 3.00 3.15 4.00 3.76 3.40
8 3.28 3.38 3.53 4.38 4.14 3.78
7 3.65 3.76 3.94 4.76 4.52 4.16
6 4.11 4.22 4.41 5.22 4.98 4.72
5 4.62 4.72 4.95 5.72 5.48 5.22
4 5.18 5.28 5.53 6.28 6.04 5.78
3 5.81 5.94 6.20 6.94 6.70 6.44
2 6.55 6.68 6.93 7.68 7.44 7.18
1 7.34 7.46 7.75 8.46 8.22 7.96
0 8.26 8.38 8.69 9.38 9.14 8.88
Stanar color: clear(natural)
5/20/2018 Ficha Tecnica Termoencogible
24/33
- 24 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CBPVC300/CBPVC600 PVC TUBING
CB-PVC300/CB-PVC600 is a UL/CUL Rate PVC e-
ible, ame-retarant, non-heat shrinable tubing
which has ecellent electrical an physical proper-
es, incluing ecellent aci fastness an corrosion
resistance. This tubing is suitable for insulaon use
in automove electronics, terminal lugs, small elec-
trical parts, lea wires of toy motors an transform-
ers etc. This prouct is UL liste uner le number
E180908 for blac, an E250610 for clear. All are F
mar.
SPECIFICATIONS
Specicaon of PVC300/ PVC600:Item Specicaons
Temperature Rang (C) 105C
Longituinal Change 5%
Tensile Strength (MPa) 10.4
Elongaon at brea % 100
Aging in Circulang-air Oven 136.01.0, 168hrs
Aer agingTensile Strength (Mpa) 7.3
Elongaon at brea(%) 100
Potenal Rang (V) 300V, 600V
Volume Resistance ( cm) 1010
dielectric Strength (V) 2500(60s),No breaown
Corrosion of Bare Copper No corrosion
Heat Shoc No cracing
Col Ben No cracing
5/20/2018 Ficha Tecnica Termoencogible
25/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
SIzE OF PVC300/PVC600
AWG size Insie iameter
(mm)
Average Wall-thicness (mm)
For CB-300 For CB-600
5/8 16.00.70.18 0.70.18
9/16 14.3
1/2 12.7
0.570.15
0.570.1
7/16 11.1
3/8 9.53
5/16 7.92
0# 8.38
0.450.1
1# 7.47
2# 6.68
3# 5.94
4# 5.28
5# 4.72
6# 4.22
7# 3.87
8# 3.38
9# 3.00
10# 2.69
0.350.1
11# 2.41
12# 2.16
13# 1.93
14# 1.68
15# 1.50
16# 1.34
17# 1.19
18# 1.07
0.450.1519# 0.96
20# 0.86
21# 0.79
Insie diameter tolerance 5%
Other sizes are available upon special orer.
5/20/2018 Ficha Tecnica Termoencogible
26/33
- 26 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
CBSGS FIBERGLASS TUBING
CB-SGS series tubing is a UL rate, eible, ame-
retarant, halogen-free an comprise of silicone
resin connuously coate on electrical grae brai-
e berglass tubing. CB-SGS is wiely use in many
consumer appliances, lighng tures, stoves, oven
an furnace controls, relays, breaer panels, switch-
gear an other commercial an inustrial equip-
ment.
Cercaons: UL1441
SPECIFICATIONS
Specicaons of SGS:
Proucts No. dielectric graeMin. Ave.
breaownMin. Iniviual
Operaon
temperature
SGS-15 C-2 1500V 1000V -10C~200C
SGS-25 C -1 2500V 1800V -10C~200C
SGS-40 B 4000V 3000V -10C~200C
SGS-70 A 7000V 5000V -10C~200C
SIZE of SGS Fiberglass Tubing: SGS SERIES are available in size 0.5mm though 25mm.
5/20/2018 Ficha Tecnica Termoencogible
27/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
CBSRS SERIES FIBERGLASS TUBING
CB-SRS series tubing is a UL rate, eible, ame-
retarant, halogen-free an is coate with silicone
rubber uner high temperature. It has goo electri-
cal insulaon properes an is wiely use in many
consumer appliances, lighng tures, stoves, oven
an furnace controls, relays, breaer panels, switch-
gear an other commercial an inustrial equip-
ment.
Cercaon: UL1441
Remars:
CB-SRS1 is Silicone rubber berglass (ber insie
an rubber outsie)
CB-SRS2 is Silicone rubber berglass (rubber insie an ber outsie)
SPECIFICATIONS
Specicaons of SRS:Proucts No. dielectric grae Min. Ave. breaown Min. Iniviual Operaon temperature
SRS1 A 7000V 5000V -10C~200C
SRS2 A 7000V 6000V -10C~200C
SIZE of SRS: SRS SERIES are available in size 1.0mm though 12mm.
OTHER CYG PRODUCTS AVAILABLE
Laer Style Marer Material Printable Heat Shrin Marer Material on a carrier strip
PET Heat Shrinable Film thin lm use for baery, capacitor an light bulb encapsulaon
Heat Shrinable Bu Splice Connectors Plasc covere heat shrinable splice connectors
Heat Shrinable Bus Bar Tubing Heat shrin use specically for Bus Bars
Nylon Cable Ties
Col Shrin Col shrinable tubing use in power line applicaons
Heat Shrinable Boots Specialize heat shrinable boots an en caps
Many Specialize Heat Shrin applicaon proucts
Please call for addional informaon.
5/20/2018 Ficha Tecnica Termoencogible
28/33
- 28 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
XD4 Dual Head Heat
Shrink Printer
Prints on both sides
of heat shrink
A4+M Heat Shrink Printer
Prints on one side
of heat shrink
HEAT SHRINK PRINTER
Heat Shrink Printer Ribbons
Black White
HEAT SHRINK RELATED
EqUIPMENT
5/20/2018 Ficha Tecnica Termoencogible
29/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
FOCUSLITE80
SpecicaonsShrin Length: up to 8.0
Largest Wor Piece diameter: 5/8
Inclues: dimmer Switch, AjustableTimer, Glare Shiel, 6 power cor w/GFCI
Acvaon: Foot peal
Energy Use: 300 was (avg.) / 125VAC
Bulb: Commercial quality Quartz Halogen
Avg. Shrin Time: 2-4 Secons (polyolen)
Ship Weight: 40lbs.
C on ta ct f a ct or yf o r e xa ct d i me ns io ns ands pecification
IN
18.00
8.0
8.50
.625
9.25
FOCUSLITE 10
SpecicaonsShrin Length: up to 1.0
Largest Wor Piece diameter: 5/8
Includes:dimmer Switch, Ajustable
Timer, Glare Shiel, 6 power cor w/GFCI
Acvaon: Foot pealEnergy Use: 146 was (avg.) / 125VAC
Bulb: Commercial quality Quartz Halogen
Avg. Shrin Time: 2-4 Secons (polyolen)
Ship Weight: 20lbs.
FOCUSLITE30
SpecicaonsShrin Length: up to 2.25
Largest Wor Piece diameter: 5/8
Inclues: dimmer Switch, Ajustable
Timer, Glare Shiel, 6 power cor w/GFCI
Acvaon: Foot peal
Energy Use: 146 was (avg.) / 125VAC
Bulb: Commercial quality Quartz Halogen
Avg. Shrin Time: 2-4 Secons (polyolen)
Ship Weight: 40lbs.
C on ta ct f a ct or yf o r e xa ct d i me ns io ns ands pecificatio
I
8.90
12.25
9.25
1.00
.625
C on ta ct f a ct or yf o r e xa ct d i me ns io ns ands pecification
IN
8.50
.625
18.00
9.25
2.25
HEAT SHRINK PROCESSING
MACHINES THAT USE HALOGEN
LIGHT SOURCE
5/20/2018 Ficha Tecnica Termoencogible
30/33
- 30 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
FOCUSLITE 160
SpecicaonsShrin Length: From 1.0 - 16.0
Largest Wor Piece diameter: 5/8
Inclues: dimmer Switch, Ajustable
Timer, Glare Shiel, 6 power cor w/GFCIAcvaon: Foot peal
Energy Use: 146 was (avg.) / 125VAC
Bulb: Commercial quality Quartz Halogen
Avg. Shrin Time: 2-4 Secons (polyolen)
Ship Weight: 25lbs. to 40lbs.C on ta ct f a ct or yf o r e xa ct d i me ns io ns .ands pecifications
INCH
24.00
8.50
.625
9.25
FOCUSLITEG2
SpecicaonsShrin Length: up to 3.0
Largest Wor Piece diameter: 1.5
Inclues: dimmer Switch, Ajustable Timer,Glare Shiel, 6 power cor w/GFCI
Acvaon: Foot peal
Energy Use: 300 was (avg.) / 125VAC
Bulb: Commercial quality Quartz Halogen
Avg. Shrin Time: 2-4 Secons (polyolen)
Ship Weight: 40lbs.
FOCUSLITE G3
HAND HELD
SpecicaonsShrin Length: up to 1.375Largest Wor Piece diameter: 5/8
Inclues: dimmer Switch, Ajustable Timer,
6 power cor w/GFCI
Acvaon: Trigger switch
Energy Use: 120 was (avg.) / 125VAC
Bulb: Commercial quality Quartz Halogen
Avg. Shrin Time: 2-4 Secons (polyolen)
Ship Weight: 4lbs.
C ont ac tf ac to ry f or e xa ct d i men si ons .ands pecifications
INCH
18.00
9.25
10.25
1.50
C on ta ct f a ct or yf o r e xa ct d i me ns io ns .ands pecifications
INCH
6.50
8.50
1.375
3.59
.55
5/20/2018 Ficha Tecnica Termoencogible
31/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
SPECIFICATIONS
ULTRAHEAT II
SV 803 - Variable Temperature Heat Gun
STEINELs Ultra Heat II is a variable temperature heat gun featuring 3 airow sengs for maimum usertrol. This moel also has a so grip hanle for comfortable operaon.
SPECIFICATIONS
Item Specicaons
Variable Temperature: Up to 1050F
3-Stage Airow: Cool air, 140F
Low air
High air
Power Cor: Rubber construcon, ouble insulate for safety
Output: 1400 was
Voltage: 120 VAC / 60 Hz
Cercaons: UL/C-UL
Warranty: Full One Year
Item Number: 34103
HB 1750 STEINEL HEAT BLOWERS
Item No. 34750 Moel HB 1750 (Inclues all 5 eys )
34751 HB 1750 B Blower w/ Blue ey
34752 HB 1750 G Blower w/ Gray ey
34753 HB 1750 Y Blower w/ Yellow ey
34754 HB 1750 O Blower w/ Orange ey
34755 HB 1750 R Blower w/ Re ey
dimensions (h w ) 9 1/2 5 9 1/2
Weight 2.4 lbs
Voltage 120 VAC / 60 Hz
Output 1750 WTemperature 200 F - 1200 F (all ve eys )
Airow rate Up to 23 CFM, ajustable with bae
Power cor Inustrial grae rubber, length: 6 .
SPECIFICATIONS
Color key Moel Temperature Ra
HB 1750 200 F - 1200
Blue HB 1750 B 200 F - 300
Gray HB 1750 G 300 F - 500
Yellow HB 1750 Y 500 F - 750
Orange HB 1750 O 750 F - 1000
Re HB 1750 R 1000 F - 1200
HEAT GUNS
5/20/2018 Ficha Tecnica Termoencogible
32/33
- 32 -
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.COM
5/20/2018 Ficha Tecnica Termoencogible
33/33
CYGUSA| 5185 N. US 31 | Eastport, MI 49627 | T 231.599.9956 | F 231.599.2965 | WWW.CYGHEATSHRINK.C
Recommended