View
236
Download
1
Category
Preview:
DESCRIPTION
Side-mounted hydraulic reach mowers with “Telescopic” arm. Gear hydraulic system “HP” (Energy) or piston hydraulic system in open circuit (Power). For grass, shrubs, bushes, hedges, sticks, wood (max. cutting width: Ø 8 cm)
Citation preview
FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - info@ferrisrl.it - www.ferrisrl.itSpare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: parts@ferrisrl.itAfter sales service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: service@ferrisrl.it
Equipped with:
IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructionsand warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.
IN EURO IN VIGORE DAL 1 GIUGNO 2013 HP available to the rotormax HP to hydraulic motor
5268
6573
Energy Power
ENERGY-POWERSIDEMOUNTED TELESCOPICFLAIL HEDGER MOWER
HP Tractor 100 120 140 160 180 Min. tractor weightKg
Min. tractor widthm
BSV8 4800 2,30
BSV10 5200 2,40
BSV12 6000 2,50
Technical dataModel Max
horizontalreach*
Telescopearms
Oil Rotor PtoEnergy
PtoPower
Flail headangle
m n° l Rpm Rpm
BSV8 8,70 1 220 3.000 540 1.000 190°
BSV10 10,40 2 225 3.000 540 1.000 190°
BSV12 12,10 3 230 3.000 540 1.000 190°
* Reach measured from tractor centre line to head edge.
Working positions (m)
BSV8 BSV10 BSV12
A m 8,70 10,40 12,10
B m 5,73 7,39 9,14
C m 8,16 10,01 11,68
D m 1,42 1,42 1,42
D
B
A
C
“OVERLAP” spiral rotor with two spiral rows
Energy Version Flail head TNH125
Totally Independent hydraulic system (high performance gear pump and motor)
Direct drive
Power Version Flail head TNHC125
Totally independent hydraulic system with piston pump and motor in closed circuit
Tootheed belt drive
Warning
new
new
Recommended